Search

In this study, an investigation of winding structures is performed for 3-phase unbalanced and asymmetric winding permanent magnet (PM) machines including different slot-pole combinations. There are two different cases for unbalanced winding (UBW) structure: 1) Stator slot number of the machine is divisible by three, 2) Stator slot number of the machine is not divisible by three. Only the first case is examined in this paper. The unbalanced winding layouts are created for minimum unbalance and maximum winding factor. Total magneto motive force (MMF) distributions for nine different slot-pole combinations and their harmonic contents are presented. Variation of the amount of unbalance for different slot-pole combinations is also provided in the paper. Key issues arising from the asymmetric and unbalanced windings such as degree of asymmetric and unbalanced magnetic pull are explored. A prototype motor with 39-slots and 12-poles has been manufactured for experimental verification. A comparison between the finite element analysis (FEA) results and experimental results is presented for the prototype motor for both no-load and on-load conditions. It is shown that the asymmetric and unbalanced winding PM motors have significant potential for applications requiring smooth torque operation. [ABSTRACT FROM AUTHOR]

Consequent-pole (CP) permanent magnet (PM) configuration suffers asymmetric electromagnetic characteristics although it saves PM usage. The CP-based stator-PM synchronous machines are investigated in this paper, with particular reference to symmetrical issues. The electromagnetic performances of the CP-based stator-PM synchronous machines are firstly evaluated. Afterwards, the rule of even order harmonics cancellation is presented for different slot/pole number combinations and winding layouts, based on which symmetrical phase flux-linkages can be obtained although the unbalanced magnetic flux naturally occurs. Moreover, based on the three-dimensional finite element analysis, the unipolar end leakage-flux caused by the asymmetric magnetic field is identified, and the risk of the shaft magnetization is revealed. Finally, a pair of prototype machines are fabricated and measured to validate the analyses. [ABSTRACT FROM AUTHOR]

This paper formulates the difference in base frequency and maximum torque between distributed and concentrated windings taking into account the air-gap modulation of concentrated-winding permanent magnet (PM) motors. The design superiority is typically confirmed for each winding type during a development period by using time-consuming finite element analysis (FEA). We propose a quantification that enables motor designers to easily judge, at the initial design stage, a superior winding type and to shorten a design period. Throughout our formulation, we found that the distributed-winding PM motors, in principle, have larger q-axis inductance and smaller d-axis inductance than the concentrated-winding motors, which leads to a decrease in the base frequency. On the other hand, the distributed winding inherently has higher winding factor and needs shorter stack length of core than the concentrated winding for identical torque output, which results in an increase in the base frequency. And also, we theoretically quantified the difference in reluctance-torque contribution between the two winding types and found that it was too small to have much impact on practical design. We applied the proposed formulae to a 0.2-kW concentrated-winding Nd-Fe-B magnet motor and were able to quantify the base frequency, the maximum torque, and the minimum stack length of core for a distributed-winding motor with high accuracy without having to rely on FEA. The FEA and measurement results demonstrated the validity of the proposed approach for the fabricated distributed-winding PM motor. [ABSTRACT FROM AUTHOR]