Search

This study aims to explore the role of graphene in enhancing the radiation resistance of epoxy resin (EP) composites. Through the resin transfer molding process, we prepared 0.3 wt% graphene oxide (GO) and Hummer's method reduced graphene oxide (Hh-RGO) reinforced EP composites, respectively. By comparing the microstructure, free radical content, thermal stability, and mechanical properties of EP, GO/EP, and Hh-RGO/EP composites before and after γ-ray irradiation, we found that GO and Hh-RGO can effectively reduce the generation of free radicals in EP during irradiation, thereby reducing chemical bond breakage and enhancing its radiation resistance. Particularly, GO demonstrated stronger radiation damage resistance. The results showed that after γ-ray irradiation, the glass transition temperature, nano-indentation depth, and hardness of GO/EP composites decreased by 20.32%, 416.3 nm, and 16.00%, respectively, whereas EP decreased by 30.34%, 502.1 nm, and 41.82% respectively. This is mainly attributed to the fact that the addition of graphene nanoparticles as a reinforcement reduces the free radical content in EP and reduces the damage of free radicals to the EP crosslinked network during irradiation, thereby improving the thermal stability and mechanical properties of the composites. In addition, the Π electrons formed by the hexagonal honeycomb structure of GO and the Π-Π stacking effect formed with free radicals can slow down the aging of epoxy resin in a high-energy radiation environment, thereby prolonging its service life. This study provides important references for further optimization and application of graphene-modified epoxy resin. [ABSTRACT FROM AUTHOR]

By developing a thermo-mechanical coupled model, we quantitatively analyzed the effect of thermo-oxidative ageing on the temperature, thermal strain and thermal stress histories of braided composites during high-speed impact. We also considered temperature dependence of elastic modulus during impact in this model. The proposed model was first applied to the unaged composites, then the results were compared to the impact responses captured by the split Hopkinson bar and the high-speed camera. The comparisons of the experimental and numerical results show that the proposed model could capture the adiabatic temperature rise, stress-strain responses and failure process of braided composites during high-speed impact. The validated model was subsequently employed to thermo-oxidative aged composites. Results show that the temperature rise, thermal strain and thermal stress all depend on the mechanical properties of resin, and they decreased with the increase of ageing temperature since the performance of resin is compromised by thermo-oxidation ageing. The change of resin performance after ageing leads to the change in the temperature rise during impact, so the stiffness of composites will decrease in varying degrees after ageing. [ABSTRACT FROM AUTHOR]

The silanized graphene oxide (KH-GO) with different mass fractions was dispersed in epoxy resin by a solution blending method and resin transfer molding process. The nano indentation method was used to test the micromechanical properties of GO/epoxy composites with different mass fractions, and the effect of GO on the hardness of epoxy matrix composites was quantitatively determined, and the influence of adding KH-GO on the thermal mechanical and bending properties of epoxy resin was discussed by dynamic thermal mechanical and universal strength machine tests. The experimental results show that the thermal and mechanical properties of composites are improved with the increase of the amount of KH-GO. Especially, when the content of KH-GO was 0.3%, the bending strength (125.4 MPa), hardness (281.0 MPa), and glass transition temperature (99.6°C) of composites reached the highest. It was proved that the composites showed its excellent performance and the silane coupling agent was successfully grafted to the graphene oxide by covalent bond, which effectively improved the interface compatibility of the reinforcing body and the matrix and was related to good dispersibility in the epoxy resin. This method is simple and effective, providing a certain reference value for the enhancement of the mechanical properties of the next generation of nanocomposites. [ABSTRACT FROM AUTHOR]

The serious damage caused to 3D braided carbon fiber (CF)/epoxy (EP) composites in high-energy irradiation environments is a pressing research topic that has not yet been reported. This study analyzed the γ-irradiation multi-scale damage of the matrix, interfaces, and near-interface regions in 3D braided CF/EP composites with three different braiding angles (18°, 28°, 38°) at atomic, microscopic, and macroscopic scales. The molecular structure and atomic charge information alterations of epoxy matrix were characterized using soft X-ray absorption spectroscopy (sXAS). When the irradiation dose reached 1000 KGy, the compressive strength of composites decreased by 20.88 %, 18.07 %, and 16.60 %, respectively, with an increase in the braiding angle. Micro-CT observation, along with statistical computing, confirmed that irradiation causes interface damage and increases the defect volume of 3D braided composites. Nanoindentation was used to compare the modulus of carbon fiber, interface, near-interface regions and matrix in irradiated composites and the function of CF/resin interface as an irradiation defect capture site in the irradiation resistance of resin-matrix composites has been newly established. In addition, the mechanism behind the effect of braiding angle on macroscopic properties was also analyzed. [Display omitted] • The braided structures exhibited varying responses to irradiation, with 3D-38° showing the highest performance retention. • Soft X-ray absorption spectrometry was developed to characterize the valence changes of oxygen and carbon in irradiated resin. • Interface as an irradiation defect capture site consumes most of the energy and reduces the damage of resin near the interface. [ABSTRACT FROM AUTHOR]

• Modified metal-organic framwork are applied to improve the radiation resistance of epoxy resins and investigate the anti irradiation mechanism of metal-organic framework. • UIO-66-OH nanoparticles can effectively improve the tensile modulus and thermal stability of epoxy resin. • 88.7% reduction in free radical concentration of UIO-66-OH / EP composite compared to epoxy resin. Understanding the degradation mechanism of epoxy resin under irradiation and enhancing the radiation resistance of epoxy resin are of great significance for its application in aerospace and nuclear industries. In this study, we investigated the radiation resistance of epoxy reinforced by UIO-66-OH metal-organic framework. Outstanding radiation resistance was achieved by using UIO-66-OH nanoparticles as radical scavengers to retard epoxy degradation. The introduction of UIO-66-OH reduces the content of free radicals generated after irradiation by 88.17%. UIO-66-OH also improves the mechanical and thermal properties of epoxy before and after irradiation. The scavenging radicals mechanism of hydrogen atom transfer of UIO-66-OH is more dominant than that of graphene oxide and carbon nanotubes. The radiation resistance of UIO-66-OH nanoparticles is related to hydroxyl functionalization and porous structure. This work provides a new idea and method for improving the stability of epoxy resin under gamma ray radiation. [ABSTRACT FROM AUTHOR]

The steel fiber textile overcomes mostly the shortcomings of traditional reinforcement materials. However, the poor corrosion resistance severely limits service life. In this study, based on the mechanism of stress corrosion and electrochemical corrosion, the epoxy resin anti-corrosion coating was designed and prepared. First, the von Mises stress distribution of lamellar and spherical fillers in epoxy resin was studied by finite element simulation, which confirmed that the stress distribution of spherical SiO 2 filler was more uniform when it was stressed. In addition, to optimize the dispersion of spherical SiO 2 in epoxy resin, the spherical polyaniline@SiO 2 (PANI@SiO 2) composites with core-shell structure were produced with in situ polymerization method. Ultrasonic C scanning results showed that the addition of PANI@SiO 2 nano-filler can effectively reduce the defects in epoxy resin. Compared with bare steel fiber, the composites coating of 2 wt% PANI@SiO 2 /epoxy showed the most excellent resistance to stress corrosion and electrochemical corrosion. The capacitance diameter is two orders of magnitude higher, which has good stability in simulated concrete pore solution. This is due to the fact that the addition of PANI@SiO 2 nanomaterials improves the physical shielding properties of epoxy, creating a labyrinth effect, and that PANI can produce passivation on the metal surface. • The finite element results showed that the spherical filler could improve the stress corrosion resistance of the epoxy composite coating. • Spherical PANI@SiO 2 composites with core-shell structure were successfully prepared, and the coating rate of PANI reached 21.04 %. • The addition of PANI@SiO 2 nanofillers could effectively reduce the defects in the epoxy resin. • The impedance spectrum of the 2 wt% PANI@SiO 2 /EP anticorrosive coating was 6 × 105 Ω/cm2 and showed good stability. [ABSTRACT FROM AUTHOR]