Search

Micro-sized silicon anodes can significantly increase the energy density of lithium-ion batteries with low cost. However, the large silicon volume changes during cycling cause cracks for both organic-inorganic interphases and silicon particles. The liquid electrolytes further penetrate the cracked silicon particles and reform the interphases, resulting in huge electrode swelling and quick capacity decay. Here we resolve these challenges by designing a high-voltage electrolyte that forms silicon-phobic interphases with weak bonding to lithium-silicon alloys. The designed electrolyte enables micro-sized silicon anodes (5 µm, 4.1 mAh cm−2) to achieve a Coulombic efficiency of 99.8% and capacity of 2175 mAh g−1 for >250 cycles and enable 100 mAh LiNi0.8Co0.15Al0.05O2 pouch full cells to deliver a high capacity of 172 mAh g−1 for 120 cycles with Coulombic efficiency of >99.9%. The high-voltage electrolytes that are capable of forming silicon-phobic interphases pave new ways for the commercialization of lithium-ion batteries using micro-sized silicon anodes. Micro-sized silicon are promising anode materials due to low-cost and high-energy, yet their application is hindered by inaccessible electrolytes. Here, the authors report sulfolane-based electrolytes that form silicon-phobic interphases and enable high-voltage pouch cells to achieve superior cycle life. [ABSTRACT FROM AUTHOR]

The formation of lithiophobic inorganic solid electrolyte interphase (SEI) on Li anode and cathode electrolyte interphase (CEI) on the cathode is beneficial for high‐voltage Li metal batteries. However, in most liquid electrolytes, the decomposition of organic solvents inevitably forms organic components in the SEI and CEI. In addition, organic solvents often pose substantial safety risks due to their high volatility and flammability. Herein, an organic‐solvent‐free eutectic electrolyte based on low‐melting alkali perfluorinated‐sulfonimide salts is reported. The exclusive anion reduction on Li anode surface results in an inorganic, LiF‐rich SEI with high capability to suppress Li dendrite, as evidenced by the high Li plating/stripping CE of 99.4% at 0.5 mA cm−2 and 1.0 mAh cm−2, and 200‐cycle lifespan of full LiNi0.8Co0.15Al0.05O2 (2.0 mAh cm−2) || Li (20 µm) cells at 80 °C. The proposed eutectic electrolyte is promising for ultrasafe and high‐energy Li metal batteries. [ABSTRACT FROM AUTHOR]

Rechargeable halide-ion batteries (HIBs) are good candidates for large-scale due to their appealing energy density, low cost, and dendrite-free features. However, state-of-the-art electrolytes limit the HIBs' performance and cycle life. Here, via experimental measurements and modelling approach, we demonstrate that the dissolutions in the electrolyte of transition metal and elemental halogen from the positive electrode and discharge products from the negative electrode cause the HIBs failure. To circumvent these issues, we propose the combination of fluorinated low-polarity solvents with a gelation treatment to prevent dissolutions at the interphase, thus, improving the HIBs' performance. Using this approach, we develop a quasi-solid-state Cl-ion-conducting gel polymer electrolyte. This electrolyte is tested in a single-layer pouch cell configuration with an iron oxychloride-based positive electrode and a lithium metal negative electrode at 25 °C and 125 mA g–1. The pouch delivers an initial discharge capacity of 210 mAh g–1 and a discharge capacity retention of almost 80% after 100 cycles. We also report assembly and testing of fluoride-ion and bromide-ion cells using quasi-solid-state halide-ion-conducting gel polymer electrolyte. State-of-the-art electrolytes limit the cycle life of halide-ion batteries. Here, the authors report a fluorinated low-polar gel polymer electrolyte capable of improving the stability of the electrolyte and electrode interphases to boost battery performance. [ABSTRACT FROM AUTHOR]

Electrolyte engineering is crucial for developing high‐performance lithium metal batteries (LMB). Here, we synthesized two cosolvents methyl bis(fluorosulfonyl)imide (MFSI) and 3,3,4,4‐tetrafluorotetrahydrofuran (TFF) with significantly different reduction potentials and add them into LiFSI‐DME electrolytes. The LiFSI/TFF‐DME electrolyte gave an average Li Coulombic efficiency (CE) of 99.41 % over 200 cycles, while the average Li CEs for MFSI‐based electrolyte is only 98.62 %. Additionally, the TFF‐based electrolytes exhibited a more reversible performance than the state‐of‐the‐art fluorinated 1,4‐dimethoxylbutane electrolyte in both Li||Cu half‐cell and anode‐free Cu||LiNi0.8Mn0.1Co0.1O2 full cell. More importantly, the decomposition product from bis(fluorosulfonyl)imide anion could react with ether solvent, which destroyed the SEI, thus decreasing cell performance. These key discoveries provide new insights into the rational design of electrolyte solvents and cosolvents for LMB. [ABSTRACT FROM AUTHOR]

The instability of carbonate electrolyte with metallic Li greatly limits its application in high‐voltage Li metal batteries. Here, a "salt‐in‐salt" strategy is applied to boost the LiNO3 solubility in the carbonate electrolyte with Mg(TFSI)2 carrier, which enables the inorganic‐rich solid electrolyte interphase (SEI) for excellent Li metal anode performance and also maintains the cathode stability. In the designed electrolyte, both NO3− and PF6− anions participate in the Li+‐solvent complexes, thus promoting the formation of inorganic‐rich SEI. Our designed electrolyte has achieved a superior Li CE of 99.7 %, enabling the high‐loading NCM811||Li (4.5 mAh cm−2) full cell with N/P ratio of 1.92 to achieve 84.6 % capacity retention after 200 cycles. The enhancement of LiNO3 solubility by divalent salts is universal, which will also inspire the electrolyte design for other metal batteries. [ABSTRACT FROM AUTHOR]

The capacity of transition metal oxide cathode for Li‐ion batteries can be further enhanced by increasing the charging potential. However, these high voltage cathodes suffer from fast capacity decay because the large volume change of cathode breaks the active materials and cathode‐electrolyte interphase (CEI), resulting in electrolyte penetration into broken active materials and continuous side reactions between cathode and electrolytes. Herein, a robust LiF‐rich CEI was formed by potentiostatic reduction of fluorinated electrolyte at a low potential of 1.7 V. By taking LiCoO2 as a model cathode, we demonstrate that the LiF‐rich CEI maintains the structural integrity and suppresses electrolyte penetration at a high cut‐off potential of 4.6 V. The LiCoO2 with LiF‐rich CEI exhibited a capacity of 198 mAh g−1 at 0.5C and an enhanced capacity retention of 63.5 % over 400 cycles as compared to the LiF‐free LiCoO2 with only 17.4 % of capacity retention. [ABSTRACT FROM AUTHOR]

The instability of sulfide solid electrolytes to Li anode and high‐voltage LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes limits the cyclic performance of all‐solid‐state lithium battery (ASSLB). Herein, the stability of Li6PS5Cl against Li anode is enhanced by mixing a small amount (0.32 wt%) of CuF2‐LiNO3 (CL) into Li6PS5Cl electrolyte layer to in‐situ form a mixed‐conductive‐lithiophobic and self‐healing LiF‐Li3N‐Cu solid electrolyte interphase (SEI) at Li6PS5Cl‐CL/Li interface. The critical current density (CCD) of Li6PS5Cl‐CuF2‐LiNO3 increases to 1.4 mA cm–2/1.4 mAh cm–2 at room temperature, which is much higher than that of pristine Li6PS5Cl (0.4 mA cm–2/0.4 mAh cm–2) even though mixing 0.32 wt% CL into Li6PS5Cl slightly reduces the ionic conductivity from 2.9 × 10–3 to 1.5 × 10–3 S cm–1. The compatibility of Li6PS5Cl‐CL electrolyte to single‐crystalline NMC811 (S‐NMC811) is further enhanced by adding a small amount (0.02 wt%) of AlF3 into Li6PS5Cl‐CL forming Li6PS5Cl‐CuF2‐LiNO3‐AlF3 (Li6PS5Cl‐CLA) as a cathode electrolyte and by doing Cl– on S‐NMC811 (Cl@S‐NMC811) surface. The Cl@S‐NMC811‐Li6PS5Cl‐CLA|Li6PS5Cl‐CL|Li cells with areal capacity of 2.55 mAh cm‐2 achieve a capacity retention of 69.4% after 100 cycles at 1C (1C = 200 mAh g‐1). Adding a small amount of SEI and cathode/electrolyte interphase (CEI) former into the sulfide electrolytes with minimal reduction (48.3%) of ionic conductivity is an effective method to enhance the performance of ASSLB. [ABSTRACT FROM AUTHOR]

Rechargeable Zn‐ion batteries (ZIBs) are widely regarded as promising candidates for large‐scale energy storage applications. Like most multivalent battery systems (based on Zn, Mg, Ca, etc.), further progress in ZIB development relies on the discovery and design of novel cathode hosts capable of reversible Zn2+ (de)intercalation. Herein, this work employs VPO4F as a ZIB cathode and explores ensuing intercalation mechanisms along with interfacial dynamics during cycling to quantify the water dynamics in concentrated electrolytes and/or hybrid aqueous‐non aqueous (HANEs) electrolyte(s). Like most oxide‐based cathode materials, proton (H+) intercalation dominates electrochemical activity during discharge of ZnxHyVPO4F in aqueous media due to the hydroxylated nature of the interface. Such H+ electrochemistry diminishes low‐rate and/or long‐term electrochemical performance of ZIBs which inhibits implementation for practical applications. Thus, quantification of the water dynamics in various electrolytes is demonstrated for the first time. Detailed investigations of water mobility in various concentrated electrolytes and HANEs systems enable the design of an electrolyte that enhances aqueous anodic stability and suppresses water/proton activity during discharge. Tuning Zn2+/H+ intercalation kinetics simultaneously allows for a high voltage (1.9 V) and long‐lasting aqueous zinc‐ion battery: Zn|Zn(OTf)2·nH2O‐PC|ZnxHyVPO4F. [ABSTRACT FROM AUTHOR]

Since the advent of the Li ion batteries (LIBs), the energy density has been tripled, mainly attributed to the increase of the electrode capacities. Now, the capacity of transition metal oxide cathodes is approaching the limit due to the stability limitation of the electrolytes. To further promote the energy density of LIBs, the most promising strategies are to enhance the cut-off voltage of the prevailing cathodes or explore novel high-capacity and high-voltage cathode materials, and also replacing the graphite anode with Si/Si–C or Li metal. However, the commercial ethylene carbonate (EC)-based electrolytes with relatively low anodic stability of ∼4.3 V vs. Li+/Li cannot sustain high-voltage cathodes. The bottleneck restricting the electrochemical performance in Li batteries has veered towards new electrolyte compositions catering for aggressive next-generation cathodes and Si/Si–C or Li metal anodes, since the oxidation-resistance of the electrolytes and the in situ formed cathode electrolyte interphase (CEI) layers at the high-voltage cathodes and solid electrolyte interphase (SEI) layers on anodes critically control the electrochemical performance of these high-voltage Li batteries. In this review, we present a comprehensive and in-depth overview on the recent advances, fundamental mechanisms, scientific challenges, and design strategies for the novel high-voltage electrolyte systems, especially focused on stability issues of the electrolytes, the compatibility and interactions between the electrolytes and the electrodes, and reaction mechanisms. Finally, novel insights, promising directions and potential solutions for high voltage electrolytes associated with effective SEI/CEI layers are proposed to motivate revolutionary next-generation high-voltage Li battery chemistries. [ABSTRACT FROM AUTHOR]

This document is a correction notice for an article titled "High voltage electrolytes for lithium-ion batteries with micro-sized silicon anodes" published in Nature Communications. The correction addresses errors in the labeling of y-axis labels for certain figures and the caption for another figure. The original article has been corrected, and supplementary information is available online. The authors of the article are listed as Ai-Min Li, Zeyi Wang, Travis P. Pollard, Weiran Zhang, Sha Tan, Tianyu Li, Chamithri Jayawardana, Sz-Chian Liou, Jiancun Rao, Brett L. Lucht, Enyuan Hu, Xiao-Qing Yang, Oleg Borodin, and Chunsheng Wang. [Extracted from the article]