Search

A precoding technique based on polar codes and probabilistic shaping is introduced for dirty paper coding. Two variants of the precoding use multi-level shaping and sign-bit shaping in one dimension. The decoder uses multi-stage successive-cancellation list decoding with list-passing across the bit levels. The approach achieves approximately the same frame error rates as polar codes with multi-level shaping over standard additive white Gaussian noise channels at a block length of 256 symbols and with different amplitude shift keying (ASK) constellations.

With characters of low cost, portability, easy disposal, and high accuracy, as well as bulky reduced laboratory equipment, paper-based sensors are getting increasing attention for reliable indoor/outdoor onsite detection with nonexpert operation. They have become powerful analysis tools in trace detection with ultra-low detection limits and extremely high accuracy, resulting in their great popularity in medical detection, environmental inspection, and other applications. Herein, we summarize and generalize the recently reported paper-based sensors based on their application for mechanics, biomolecules, food safety, and environmental inspection. Based on the biological, physical, and chemical analytes-sensitive electrical or optical signals, extensive detections of a large number of factors such as humidity, pressure, nucleic acid, protein, sugar, biomarkers, metal ions, and organic/inorganic chemical substances have been reported via paper-based sensors. Challenges faced by the current paper-based sensors from the fundamental problems and practical applications are subsequently analyzed; thus, the future directions of paper-based sensors are specified for their rapid handheld testing.

The accuracy of a predictive system is critical for predictive maintenance and to support the right decisions at the right times. Statistical models, such as ARIMA and SARIMA, are unable to describe the stochastic nature of the data. Neural networks, such as long short-term memory (LSTM) and the gated recurrent unit (GRU), are good predictors for univariate and multivariate data. The present paper describes a case study where the performances of long short-term memory and gated recurrent units are compared, based on different hyperparameters. In general, gated recurrent units exhibit better performance, based on a case study on pulp paper presses. The final result demonstrates that, to maximize the equipment availability, gated recurrent units, as demonstrated in the paper, are the best options.

The low cost, simplicity, and ease of use of paper microfluidic devices have made them valuable medical diagnostics for applications from pregnancy testing to COVID-19 screening. Meanwhile, the increasing complexity of paper-based microfluidic devices is driving the need to produce new tools and methodologies that enable more robust biological diagnostics and potential therapeutic applications. A new design framework is being used to facilitate both research and fabrication of paper-based microfluidic biological devices to accelerate the investigative process and reduce material utilization and manpower. In this work we present a methodology for this framework to dynamically place and route microfluidic components in a nondiscrete design space where fluid volume usage, surface area utilization, and the timing required to perform specified biological assays are accounted for and optimized while also accelerating the development of potentially lifesaving new devices.

Since the introduction of paper-based analytical devices as potential diagnostic platforms a few decades ago, huge efforts have been made in this field to develop systems suitable for meeting the requirements for the point-of-care (POC) approach. Considerable progress has been achieved in the adaptation of existing analysis methods to a paper-based format, especially considering the chemiluminescent (CL)-immunoassays-based techniques. The implementation of biospecific assays with CL detection and paper-based technology represents an ideal solution for the development of portable analytical devices for on-site applications, since the peculiarities of these features create a unique combination for fitting the POC purposes. Despite this, the scientific production is not paralleled by the diffusion of such devices into everyday life. This review aims to highlight the open issues that are responsible for this discrepancy and to find the aspects that require a focused and targeted research to make these methods really applicable in routine analysis.

International audience; Despite predictions of the paperless office, global demand for printing and writing paper remains strong, and paper appears to be here to stay for some time. Not only firms, but also governments, libraries, and archives are in possession of large collections of legacy documents that still must be sorted and scanned. In this study, terahertz-based techniques are demonstrated to address several routine tasks related to the automated paper handling of unsorted legacy documents. Specifically, we demonstrate terahertz-based counting of the number of sheets in unconsolidated paper stacks, as well as locating stapled documents buried in paper stacks.

We present a rotational terahertz imaging system for inline nondestructive testing (NDT) of press sleeves for the paper industry during fabrication. Press sleeves often consist of polyurethane (PU) which is deposited by rotational molding on metal barrels and its outer surface mechanically processed in several milling steps afterwards. Due to a stabilizing polyester fiber mesh inlay, small defects can form on the sleeve’s backside already during the initial molding, however, they cannot be visually inspected until the whole production processes is completed. We have developed a fast-scanning frequenc-modulated continuous wave (FMCW) terahertz imaging system, which can be integrated into the manufacturing process to yield high resolution images of the press sleeves and therefore can help to visualize hidden structural defects at an early stage of fabrication. This can save valuable time and resources during the production process. Our terahertz system can record images at 0.3 and 0.5 THz and we achieve data acquisition rates of at least 20 kHz, exploiting the fast rotational speed of the barrels during production to yield sub-millimeter image resolution. The potential of automated defect recognition by a simple machine learning approach for anomaly detection is also demonstrated and discussed.

Microfluidic paper-based analysis devices (μPADs) have undergone tremendous development in recent years and now provide a feasible low-cost alternative to traditional laboratory tests for the diagnosis of many common diseases and disorders. As such, they are of great interest and importance in developing regions of the world with a lack of medical resources and associated infrastructures. This review examines the advances made in microfluidic paper-based diagnostic technology in the past five years and describes the application of microfluidic paper-based assays to the detection of many common human diseases using 3 non-invasive samples sources such as saliva, tears and sweat. The review commences by introducing the basic principles of fluid transport in microfluidic paper-based devices. The structures and actuation systems used in common paper-based devices are then introduced and explained. A systematic review of recent proposals for the application of paper-based devices to the diagnosis of common human diseases is then presented. The review concludes with a brief discussion of the challenges facing the microfluidics paper-based diagnosis field in the coming years and the emerging opportunities for future research.

This letter presented a pencil-on-paper-based ecofriendly capacitive touchpad fabricated through a low-cost lab- and solvent-free fabrication process. Economical, readily available, and biodegradable materials, such as pencil and paper, have been used for sensor fabrication. A touchpad based on five such sensors has been developed and evaluated by using it as a user control interface to on/off LEDs and displaying results on LCD and mobile app. The graphite sensors in the user interface have been shielded from the direct interaction of humans and the environment using changeable cling film to make the interface reliable and reusable. The interface can be used in different conditions and users by changing the shielding film. Simultaneously, the system's functionality will remain consistent and functioned similarly to the conventional touch sensors and buttons. These recyclable and easily arrayed touch sensor-based keypads can contribute to future developments in disposable and lightweight interfaces for human–machine interface, medical and healthcare applications, smart packaging, security monitoring, and consumer products.

Along with the unceasing growth of worldwide economic and the associated issues on resources, energy and environment, clean energy generating technologies that are based on recyclable materials, if possible, may become the future trend of development. Here, we report the design of a cheap, lightweight, and recyclable single-electrode triboelectric nanogenerator (TENG) that utilizes waste paper as the triboelectric material. Under the current strategy, we successfully developed green energy machines without vastly increasing the mining of various critical minerals around the world. The as-designed TENG could not only collect and convert mechanical energy into electricity with sound efficiency, but also has the merit for continuous reuse and quick construction. The maximum output power density is as high as 171 mW·m−2 at a resistance of 130 MΩ and could be integrated into a book for monitoring reading actions, thus providing a new approach to the low-cost, green and sustainable self-powered electronic systems.

Paper-based microfluidics is the branch of microfluidics involving devices made out of paper, or other porous membranes, that wick fluids by capillary action. Paper-based microfluidic devices have several advantages over conventional microfluidic devices including simpler fabrication, lower cost, easier disposal, and the ability to operate without pumps or other supporting equipment. The most common application of paper-based microfluidic devices is in the development of point-of-care (POC) diagnostic devices, which could eliminate the need for costly and time-consuming laboratory-based analytical procedures. This review provides an overview of current methods of fabricating paper-based microfluidic devices, examples of applications of these devices, a discussion of their current limitations, and an outlook on their future.

Testing embedded memories in a chip can be very challenging due to their high-density nature and manufactured using very deep submicron (VDSM) technologies. In this review paper, functional fault models which may exist in the memory are described, in terms of their definition and detection requirement. Several memory testing algorithms that are used in memory built-in self-test (BIST) are discussed, in terms of test operation sequences, fault detection ability, and also test complexity. From the studies, it shows that tests with 22 N of complexity such as March SS and March AB are needed to detect all static unlinked or simple faults within the memory cells. The N in the algorithm complexity refers to Nx*Ny*Nz whereby Nx represents the number of rows, Ny represents the number of columns and Nz represents the number of banks. This paper also looks into optimization and further improvement that can be achieved on existing March test algorithms to increase the fault coverage or to reduce the test complexity.

Flying insect detection, identification, and counting are the key components of agricultural pest management. Insect identification is also one of the most challenging tasks in agricultural image processing. With the aid of machine vision and machine learning, traditional (manual) identification and counting can be automated. To achieve this goal, a particular data acquisition device and an accurate insect recognition algorithm (model) is necessary. In this work, we propose a new embedded system-based insect trap with an OpenMV Cam H7 microcontroller board, which can be used anywhere in the field without any restrictions (AC power supply, WIFI coverage, human interaction, etc.). In addition, we also propose a deep learning-based insect-counting method where we offer solutions for problems such as the “lack of data” and “false insect detection”. By means of the proposed trap and insect-counting method, spraying (pest swarming) could then be accurately scheduled.

Due to the increasing size of s (s), their design and optimization phases (i.e., ) grow increasingly complex. At design time, a large design space needs to be explored to find an implementation that fulfills all specifications and then optimizes metrics like energy, area, delay, reliability, etc. At run time, a large configuration space needs to be searched to find the best set of parameters (e.g., voltage/frequency) to further optimize the system. Both spaces are infeasible for exhaustive search typically leading to heuristic optimization algorithms that find some trade-off between design quality and computational overhead. ML can build powerful models that have successfully been employed in related domains. In this survey, we categorize how () may be used and is used for design-time and run-time optimization and exploration strategies of s. A meta-study of published techniques unveils areas in that are well-explored and underexplored with, as well as trends in the employed algorithms. We present a comprehensive categorization and summary of the state of the art on for. Finally, we summarize remaining challenges and promising open research directions.

In mobile systems, fog, rain, snow, haze, and sun glare are natural phenomena that can be very dangerous for drivers. In addition to the visibility problem, the driver must face also the choice of speed while driving. The main effects of fog are a decrease in contrast and a fade of color. Rain and snow cause also high perturbation for the driver while glare caused by the sun or by other traffic participants can be very dangerous even for a short period. In the field of autonomous vehicles, visibility is of the utmost importance. To solve this problem, different researchers have approached and offered varied solutions and methods. It is useful to focus on what has been presented in the scientific literature over the past ten years relative to these concerns. This synthesis and technological evolution in the field of sensors, in the field of communications, in data processing, can be the basis of new possibilities for approaching the problems. This paper summarizes the methods and systems found and considered relevant, which estimate or even improve visibility in adverse weather conditions. Searching in the scientific literature, in the last few years, for the preoccupations of the researchers for avoiding the problems of the mobile systems caused by the environmental factors, we found that the fog phenomenon is the most dangerous. Our focus is on the fog phenomenon, and here, we present published research about methods based on image processing, optical power measurement, systems of sensors, etc.

In this work, some reasoning's mistakes in the paper by Kohli (doi:10.3934/jimo.2020114) are highlighted. Furthermore, we correct the flaws, propose a correct formulation of the main result (Theorem 5.1) and give alternative proofs.

Two-dimensional (2D) materials represent an emerging technology for transistor electronics in view of their attractive electrical and mechanical properties. This work investigates molybdenum disulfide (MoS2) based field-effect transistors (FETs) fabricated on paper substrate for designing both digital and analog circuits, such as inverter, current mirror, and Physical Unclonable Function (PUF) bitcell. Electrical measurements of fabricated devices are exploited to setup a look-up-table (LUT)-based Verilog-A model to be integrated in a commercial circuit simulator. Obtained results prove the potential of paper-based MoS2 FETs as building blocks of next-generation integrated circuits for a wide range of practical applications.

Over the past few years, researchers have focused on stimulus-responsive soft materials and their applications in the design of soft actuators. The key factor of the soft actuators to achieve various applications is the programmable and controllable shape deformations. Here, a versatile and simple surface patterning method consisted of pencil drawing and pasting polymer films is proposed to design the soft actuators with programmable deformations. Due to the thermal expansion effect and the hygroexpansion effect, the graphite paper/polymer actuator performs a bending motion with a curvature of 1.4 cm−1 under light irradiation and 1.2 cm−1 under high humidity. Owing to the convenience of the patterning method, different patterns on both two surfaces of the paper substrate are designed without effort. Thus, through tuning the grayscale of the graphite on one surface of the paper, three types of T-shaped actuators can be obtained with different deformations under light irradiation. In addition, by pencil drawing or hydrophobically modifying specific patterns on the two surfaces of the paper, three types of strip-shaped actuators are also proposed to demonstrate that different 3D shape deformations can be obtained under different stimuli. Finally, a helix-shaped actuator inspired by the natural plant tendrils is fabricated by the thermal-induced shaping method. The helix-shaped actuator performs twisting/untwisting motion under different stimuli and can be used as a grasping robot. These results demonstrate the diversified programmability of the graphite paper/polymer actuator. Hence, the simple and versatile programming methods of soft actuators have great potential to be used in the field of biomimetic applications, intelligent robotics, and lab-on-paper devices.

It is generally accepted that the latest research findings are published as research papers in journals. Social network analysis (SNA) can offer a perspective from which to analyze technological developments. This work analyzes the development of lithium-ion batteries (LIBs) and electrolytes by SNA based on papers from 2011 to 2015. Three types of social networks, country-, institution-, and research paper-based networks were used. Country-based network analysis shows that major ten countries have a close relationship with respect to technology development. Institution-based network analysis revealed that 48 top institutions publish the most prolifically and that a “small-world” effect exists within the network, indicating excellent knowledge transfer among institutions through citations. Several institutions occupy the center position within the network and have a prominent influence in knowledge transfer as judged by centrality analysis. Research paper-based social networks, consisting of high-citation articles, are grouped into six technology clusters, which exhibit a broad range of knowledge transfer processes regardless of the battery and electrolyte types, indicating underlying closely interwoven relationships. The knowledge transfer path can describe the technology evolution in detail. An overview of technological development status can be thus obtained by this proposed three-level analysis method.

The optical model for reflectance lightness of stereo paper product surface is proposed, which could promote color reproduction study of paper model products and improving color reproduction quality. The reflectance lightness was measured using non-contact measurement method with spectroradiometer, CS2000A, that can measure stereo paper product surface lightness and tristimulus. Once inputting the paper product parameters of surface angle and tone, the model will predict the reflectance lightness for stereo paper product surface. After analyzing statistical information of light transmission, paper product surface reflectance lightness can be obtained. The results showed that prediction model is versatile and easy to use, besides the model quite approached to realistic paper product surface. The optical model simulation system could sufficiently accomplish reflectance lightness, which provides a novel way to predict and reproduce printing quality.

Creatinine is a clinically significant analyte used to diagnose kidney condition. However, the literature still lacks in creatinine sensors fulfilling point-of-care testing requirements. In this paper, we have developed colorimetric paper-based creatinine sensors adhering to point-of-care testing principles. The signal readout is accomplished with a smartphone modified with 3D-printed elements and processed with a self-written application compromising computer vision algorithm for automatic detection of the colored zone. Two colorimetric methods – routinely used Jaffe method and an alternative one with 3,5-dinitrobenzoic acid were both tested and compared. Hue channel intensity from HSV color space and green channel from RGB color space was used as the analytical signal in Jaffe and 3,5-dinitrobenzoate method, respectively. For both kinds of sensors the linear range of the response covered the range significant for urinary analysis, with precision, expressed as RSD, below 5%. Limit of quantification for Jaffe method was 1.05 mmol·L−1 whereas it was 0.82 mmol·L−1 for 3,5-dinitrobenzoate method. The utility of the developed sensors to selectively quantify creatinine in undiluted urine was proved using artificial urine samples and the obtained recoveries were in the range from 70 to 129 %.

Our community publishes peer-reviewed journal, magazine, and conference papers and articles sharing a commitment to originality and to quality content and writing. These papers vary in their characteristics and style, depending on their objectives and their targeted readership. The IEEE Publication Services and Products Board (PSPB) Operations Manual (OM) also provides guidelines differentiating these paper types. There is confusion sometimes, however, concerning the features of magazine papers in particular. Some authors, especially early-career authors, do not fully appreciate certain differences between magazine papers and their journal, transaction, and letter counterparts. This can create a challenge for magazine editors and may result in delay, or rejection, of papers that could have been accepted if written with a better understanding of what magazines are about. We focus our attention here on this issue as it applies to IEEE Communications Magazine (ComMag) in particular. Our goal is to help our new and/or young authors who want to publish in ComMag to customize their writing to the nature of this magazine and enable them to author papers with higher chances of acceptance.

Machine learning methods are being successfully applied in various domains of human activity, including optics. Can they become a universal instrument capable of improving user aspect of photonic devices? Is their application a necessary element of such improvement? Answers to fundamental questions arising from application of machine learning methods in ultrashort-pulsed lasers are discussed. Future prospects and current fundamental limitations of such methods are analysed.

The rapid spread of the novel coronavirus disease 2019 (COVID‐19) causes a significant impact on public health. It is critical to diagnose COVID‐19 patients so that they can receive reasonable treatments quickly. The doctors can obtain a precise estimate of the infection's progression and decide more effective treatment options by segmenting the CT images of COVID‐19 patients. However, it is challenging to segment infected regions in CT slices because the infected regions are multi‐scale, and the boundary is not clear due to the low contrast between the infected area and the normal area. In this paper, a coarse‐refine segmentation network is proposed to address these challenges. The coarse‐refine architecture and hybrid loss is used to guide the model to predict the delicate structures with clear boundaries to address the problem of unclear boundaries. The atrous spatial pyramid pooling module in the network is added to improve the performance in detecting infected regions with different scales. Experimental results show that the model in the segmentation of COVID‐19 CT images outperforms other familiar medical segmentation models, enabling the doctor to get a more accurate estimate on the progression of the infection and thus can provide more reasonable treatment options.

A noise-suppressing low-light image enhancement approach is proposed in this paper based on the extent of exposedness at each image pixel. To this end, a progressive, structure-aware exposedness estimation procedure is presented that quantifies local and global exposedness. These exposedness values are leveraged to produce a locally smooth pixel-level map that signifies the required degrees of enhancement at image pixels. This map is subsequently used in an enhancement function, which satisfies a few important properties, to generate the enhanced image. Before the enhancement, inherent noise in the low-light image is diminished employing a detail-preserving, low gradient magnitude suppression method. Subjective and quantitative analysis of results on a wide variety of natural and synthetically generated low-light images from standard databases using PSNR, iRSE, SSIM, and measures of perceptual quality, natural image statistics and brightness preservation suggests that our approach in general outperforms the state-of-the-art. Ablation studies and further experiments show the importance of a few components of our approach, and that our approach is computationally fast.

In response to environmental pollution and the spread of Coronavirus Disease 2019 (COVID‐19), this paper proposes a new type of smart mask design, and specifically proposes an optimized double closed‐loop control method, especially an improved filtering fusion algorithm. Using the filtering fusion algorithm proposed in this paper, after the Kalman filter (KF) filters the raw data of the attitude sensor, explicit complementary filtering and data fusion are used to obtain the attitude angle of the body. At the same time, the obtained attitude angle is combined with acceleration and blood oxygen concentration to obtain the behaviour characteristic value. On this basis, the speed of the oxygen supply fan captured by the photoelectric sensor is used to form a closed loop with the characteristic value of the behaviour. Finally, the structure of the mask is upgraded and optimized through fluid mechanics simulation, and experiments have verified that the combination of the replaceable filter cloth, the intelligent control system and the ultraviolet disinfection device can effectively protect people's health.

The methods for identification of near-duplicates in electronic scientific papers, which include the content of the same type, for example, text data, mathematical formulas, numerical data, etc. were described. For text data, the method of locally sensitive hashing with the finding of Hamming distance between the elements of indices of electronic scientific papers was formalized. If Hamming distance exceeds a fixed numerical threshold, a scientific paper contains a near-duplicate. For numerical data, sub-sequences for each scientific work are formed and the proximity between the papers is determined as the Euclidian distance between the vectors consisting of the numbers of these sub-sequences. To compare mathematical formulas, the method for comparing the sample of formulas is used and the names of variables are compared. To identify near-duplicates in graphic information, two directions are separated: finding key points in the image and applying locally sensitive hashing for individual pixels of the image. Since scientific papers often include such objects as schemes and diagrams, subscriptions to them are examined separately using the methods for comparing text information. The combined method for identification of near-duplicates in electronic scientific papers, which combines the methods for identification of near-duplicates of various types of data, was proposed. To implement the combined method for the identification of near-duplicates in electronic scientific papers, an information-analytical system that processes scientific materials depending on the content type was devised. This makes it possible to qualitatively identify near-duplicates and as widely as possible identify possible abuses and plagiarism in electronic scientific papers: scientific articles, dissertations, monographs, conference materials, etc.

In this paper, an overview-based interactive visualization for temporally long dynamic data sequences is described. To reach this goal, each data object at a certain time point can be mapped to a number value based on a given property. Among others, a property is application-dependent and can be number of vertices, number of edges, average degree, density, number of self-loops, degree (maximum and total), or edge weight (minimum, maximum, and total) for dynamic graph data, but it can as well be the number of ball contacts in a football match, or the time-dependent visual attention paid to a stimulus in an eye tracking study. To achieve an overview over time, an aggregation strategy based on either the mean, minimum, or maximum of two values is applied. This temporal value aggregation generates a triangular shape with an overview of the entire data sequence as the peak. The color coding can be adjusted, forming visual patterns that can be rapidly explored for certain data features over time, supporting comparison tasks between the properties. The usefulness of the approach is illustrated by means of applying it to dynamic graphs generated from US domestic flight data as well as to dynamic Covid-19 infections on country levels. Graphic abstract

Autonomy of systems has been gaining increasing attention from scientists and engineers in various disciplines such as robotics, artificial intelligence, embedded systems, and control. However, there are serious challenges on the way of designing and adopting such systems, which haven’t, in our perspective, received sufficient attention yet. In this position paper, we review some of those challenges and present potential approaches of coping with them. Moreover, we highlight topics that require immediate attention and research efforts of the community. In particular, we propose three approaches: (i) More dependable autonomy using deterministic methods that can provide similar controllability, dependability, and traceability as that of traditional systems. Among such solutions is providing guarantee bands as opposed to guaranteed narrow operation points. (ii) Orthogonal autonomy adds autonomy in the extra-functional plane of the system. (iii) Expressive system design allows autonomous systems to trace and explain their decisions and reactions even though they may be using less deterministic tools.

The currently ongoing COVID-19 pandemic confronts governments and their health systems with great challenges for disease management. Epidemiological models play a crucial role, thereby assisting policymakers to predict the future course of infections and hospitalizations. One difficulty with current models is the existence of exogenous and unmeasurable variables and their significant effect on the infection dynamics. In this paper, we show how a method from nonlinear control theory can complement common compartmental epidemiological models. As a result, one can estimate and predict these exogenous variables requiring the reported infection cases as the only data source. The method allows to investigate how the estimates of exogenous variables are influenced by non-pharmaceutical interventions and how imminent epidemic waves could already be predicted at an early stage. In this way, the concept can serve as an “epidemometer” and guide the optimal timing of interventions. Analyses of the COVID-19 epidemic in various countries demonstrate the feasibility and potential of the proposed approach. The generic character of the method allows for straightforward extension to different epidemiological models.

Given a data-set of Ribonucleic acid (RNA) sequences we can infer the phylogenetics of the samples and tackle the information for scientific purposes. Based on current data and knowledge, the SARS-CoV-2 seemingly mutates much more slowly than the influenza virus that causes seasonal flu. However, very recent evolution poses some doubts about such conjecture and shadows the out-coming light of people vaccination. This paper adopts mathematical and computational tools for handling the challenge of analyzing the data-set of different clades of the severe acute respiratory syndrome virus-2 (SARS-CoV-2). On one hand, based on the mathematical paraphernalia of tools, the concept of distance associated with the Kolmogorov complexity and Shannon information theories, as well as with the Hamming scheme, are considered. On the other, advanced data processing computational techniques, such as, data compression, clustering and visualization, are borrowed for tackling the problem. The results of the synergistic approach reveal the complex time dynamics of the evolutionary process and may help to clarify future directions of the SARS-CoV-2 evolution.

The current literature on intelligent reflecting surface (IRS) focuses on optimizing the IRS phase shifts to yield coherent beamforming gains, under the assumption of perfect channel state information (CSI) of individual IRS-assisted links, which is highly impractical. This work, instead, considers the random rotations scheme at the IRS in which the reflecting elements only employ random phase rotations without requiring any CSI. The only CSI then needed is at the base station (BS) of the overall channel to implement the beamforming transmission scheme. Under this framework, we derive the sum-rate scaling laws in the large number of users regime for the IRS-assisted multiple-input single-output (MISO) broadcast channel, with optimal dirty paper coding (DPC) scheme and the lower-complexity random beamforming (RBF) and deterministic beamforming (DBF) schemes at the BS. The random rotations scheme increases the sum-rate by exploiting multi-user diversity, but also compromises the gain to some extent due to correlation. Finally, energy efficiency maximization problems in terms of the number of BS antennas, IRS elements and transmit power are solved using the derived scaling laws. Simulation results show the proposed scheme to improve the sum-rate, with performance becoming close to that under coherent beamforming for a large number of users., Accepted in IEEE Transactions on Wireless Communications

Corona Virus Disease-2019 (COVID-19) is a global pandemic which is spreading briskly across the globe. The gold standard for the diagnosis of COVID-19 is viral nucleic acid detection with real-time polymerase chain reaction (RT-PCR). However, the sensitivity of RT-PCR in the diagnosis of early-stage COVID-19 is less. Recent research works have shown that computed tomography (CT) scans of the chest are effective for the early diagnosis of COVID-19. Convolutional neural networks (CNNs) are proven successful for diagnosing various lung diseases from CT scans. CNNs are composed of multiple layers which represent a hierarchy of features at each level. CNNs require a big number of labeled instances for training from scratch. In medical imaging tasks like the detection of COVID-19 where there is a difficulty in acquiring a large number of labeled CT scans, pre-trained CNNs trained on a huge number of natural images can be employed for extracting features. Feature representation of each CNN varies and an ensemble of features generated from various pre-trained CNNs can increase the diagnosis capability significantly. In this paper, features extracted from an ensemble of 5 different CNNs (MobilenetV2, Shufflenet, Xception, Darknet53 and EfficientnetB0) in combination with kernel support vector machine is used for the diagnosis of COVID-19 from CT scans. The method was tested using a public dataset and it attained an area under the receiver operating characteristic curve of 0.963, accuracy of 0.916, kappa score of 0.8305, F-score of 0.91, sensitivity of 0.917 and positive predictive value of 0.904 in the prediction of COVID-19.

Although deterministic compartmental models are useful for predicting the general trend of a disease's spread, they are unable to describe the random daily fluctuations in the number of new infections and hospitalizations, which is crucial in determining the necessary healthcare capacity for a specified level of risk. In this paper, we propose a stochastic SEIHR (sSEIHR) model to describe such random fluctuations and provide sufficient conditions for stochastic stability of the disease-free equilibrium, based on the basic reproduction number that we estimated. Our extensive numerical results demonstrate strong threshold behavior near the estimated basic reproduction number, suggesting that the necessary conditions for stochastic stability are close to the sufficient conditions derived. Furthermore, we found that increasing the noise level slightly reduces the final proportion of infected individuals. In addition, we analyze COVID-19 data from various regions worldwide and demonstrate that by changing only a few parameter values, our sSEIHR model can accurately describe both the general trend and the random fluctuations in the number of daily new cases in each region, allowing governments and hospitals to make more accurate caseload predictions using fewer compartments and parameters than other comparable stochastic compartmental models.

The novel coronavirus infection (COVID-19) first appeared in Wuhan, China, in December 2019. COVID-19 declared as a global pandemic by the WHO was the most rapidly spreading disease all across the world. India, the second most populated nation in the world, is still fighting it, when coronavirus reached the stage where community transmission takes place at an exponential rate. Therefore, it is crucial to examine the future trends of COVID-19 in India and anticipate how it will affect economic and social growth in a short run. In this paper, a new deep learning framework using CNN and stacked Bi-GRU has been developed for predicting and analyzing the COVID-19 cases in India. The proposed model can predict the next 30 days' new positive cases, new death cases, recovery rate and containment and health index values with high accuracy. The proposed method is compared against Gaussian process regression (GPR) model on COVID-19 datasets. The experimental result shows that the proposed framework is highly reliable for COVID-19 prediction over the GPR model.

Atomic force microscopy (AFM) has been an important tool for nanoscale imaging and characterization with atomic and subatomic resolution. Theoretical investigations are getting highly important for the interpretation of AFM images. Researchers have used molecular simulation to examine the AFM imaging mechanism. With a recent flurry of researches applying machine learning to AFM, AFM images obtained from molecular simulation have also been used as training data. However, the simulation is incredibly time consuming. In this paper, we apply super-resolution methods, including compressed sensing and deep learning methods, to reconstruct simulated images and to reduce simulation time. Several molecular simulation energy maps under different conditions are presented to demonstrate the performance of reconstruction algorithms. Through the analysis of reconstructed results, we find that both presented algorithms could complete the reconstruction with good quality and greatly reduce simulation time. Moreover, the super-resolution methods can be used to speed up the generation of training data and vary simulation resolution for AFM machine learning.

Nowadays, due to modernization or advancement in the Internet of Things (IoT) especially in the Healthcare area, we want to take care of our elders with some monitoring equipment, and the Internet of Things can play a significant role in it. The motivation of writing this paper is to collect the information of various existing Internet of Things Architecture and Communication Techniques used in Healthcare Monitoring System to observe that how efficiently, different researchers have used it. So we have studied different real-time health monitoring system based on diseases which are common in elderly people like diabetes, blood pressure, heart disease, sleep apnea, and cancer, etc. In this real-time health monitoring system, researchers introduced many new measures, communication techniques like ZigBee, Long-Range Wide Area Network (LoRawan), Radio Frequency Identification (RFID). Apart from this, it was also observed that remote monitoring system in Healthcare is incomplete without data processing and early prediction in such diseases. Though, Machine learning provides efficient techniques to extract knowledge from diagnostic medical datasets collected from the patients. That is why we highlighted the current role of various Machine Learning algorithms like Support Vector Machine, K-Nearest Neighbor, Random Forest, etc., for processing of Healthcare data and also helpful to predict the output more precisely.

A joint message and state communication problem over a fading Gaussian channel with additive state is considered. The state process is assumed to be independent and identically distributed (i.i.d.) Gaussian, and known non-causally at the transmitter, while the instantaneous fading gain is assumed to be known at both the encoder and the decoder. The receiver not only has to decode the message from the transmitter, but also needs to estimate the state process to meet a prescribed distortion limit. A complete characterization of the optimal rate versus distortion performance is provided. Moreover, the converse proof presented here might be of independent interest, since it gives a simpler and more compact way of establishing the converse for settings with non-fading links studied in the literature – by virtue of relying only upon the differential entropy maximizing property of Gaussian random variables for a given variance.

During the outbreak of emerging infectious diseases, media coverage and medical resource play important roles in affecting the disease transmission. To investigate the effects of the saturation of media coverage and limited medical resources, we proposed a mathematical model with extra compartment of media coverage and two nonlinear functions. We theoretically and numerically investigate the dynamics of the proposed model. Given great difficulties caused by high nonlinearity in theoretical analysis, we separately considered subsystems with only nonlinear recovery or with only saturated media impact. For the model with only nonlinear recovery, we theoretically showed that backward bifurcation can occur and multiple equilibria may coexist under certain conditions in this case. Numerical simulations reveal the rich dynamic behaviors, including forward-backward bifurcation, Hopf bifurcation, saddle-node bifurcation, homoclinic bifurcation and unstable limit cycle. So the limitation of medical resources induces rich dynamics and causes much difficulties in eliminating the infectious diseases. We then investigated the dynamics of the system with only saturated media impact and concluded that saturated media impact hardly induces the complicated dynamics. Further, we parameterized the proposed model on the basis of the COVID-19 case data in mainland China and data related to news items, and estimated the basic reproduction number to be 2.86. Sensitivity analyses were carried out to quantify the relative importance of parameters in determining the cumulative number of infected individuals at the end of the first month of the outbreak. Combining with numerical analyses, we suggested that providing adequate medical resources and improving media response to infection or individuals' response to mass media may reduce the cumulative number of the infected individuals, which mitigates the transmission dynamics during the early stage of the COVID-19 pandemic.

Nowadays, humanity is facing one of the most dangerous pandemics known as COVID-19. Due to its high inter-person contagiousness, COVID-19 is rapidly spreading across the world. Positive patients are often suffering from different symptoms that can vary from mild to severe including cough, fever, sore throat, and body aches. In more dire cases, infected patients can experience severe symptoms that can cause breathing difficulties which lead to stern organ failure and die. The medical corps all over the world are overloaded because of the exponentially myriad number of contagions. Therefore, screening for the disease becomes overwrought with the limited tools of test. Additionally, test results may take a long time to acquire, leaving behind a higher potential for the prevalence of the virus among other individuals by the patients. To reduce the chances of infection, we suggest a prediction model that distinguishes the infected COVID-19 cases based on clinical symptoms and features. This model can be helpful for citizens to catch their infection without the need for visiting the hospital. Also, it helps the medical staff in triaging patients in case of a deficiency of medical amenities. In this paper, we use the non-dominated sorting genetic algorithm (NSGA-II) to select the interesting features by finding the best trade-offs between two conflicting objectives: minimizing the number of features and maximizing the weights of selected features. Then, a classification phase is conducted using an AdaBoost classifier. The proposed model is evaluated using two different datasets. To maximize results, we performed a natural selection of hyper-parameters of the classifier using the genetic algorithm. The obtained results prove the efficiency of NSGA-II as a feature selection algorithm combined with AdaBoost classifier. It exhibits higher classification results that outperformed the existing methods.

Introduction. This paper examines regulations which govern procedures for reporting incidents other than accidents or serious incidents related to unmanned aircraft system (UAS) operations. The regulations are discussed in the context of available data and the paper included an analysis of them from both a European and national perspective. The goal of the paper is to provide a series of recommendations with regard to the procedures for reporting and analyzing UAS incidents in order to improve the safe integration of unmanned and manned aviation. This article also explores the legal consequences that arise from the midair collision between a UAS and a manned aircraft. Material and methods: The method of study comprises a content analysis of existing legislations. The current doctrine was confronted with existing regulations, documents and materials. Results: The results of the study show that there is a practical problem of objectively identifying operators of a UAS as well as in defining what exactly constitutes an “incident”. It can be reasonably concluded that reporting and analyzing UAS-related incidents allows for the assessment and development of strategies for integrating manned and unmanned aviation. It is worth mentioning that drones and UAS technology requires refinement, especially in technological terms. It is reasonable to take action aimed at raising awareness amongst UAS users of the need to report incidents, as well as engaging UAS users in the investigative process which follows such occurrences.

The current investigation is related to the design of novel integrated neuroswarming heuristic paradigm using Gudermannian artificial neural networks (GANNs) optimized with particle swarm optimization (PSO) aid with active-set (AS) algorithm, i.e., GANN-PSOAS, for solving the nonlinear third-order Emden–Fowler model (NTO-EFM) involving single as well as multiple singularities. The Gudermannian activation function is exploited to construct the GANNs-based differential mapping for NTO-EFMs, and these networks are arbitrary integrated to formulate the fitness function of the system. An objective function is optimized using hybrid heuristics of PSO with AS, i.e., PSOAS, for finding the weights of GANN. The correctness, effectiveness and robustness of the designed GANN-PSOAS are verified through comparison with the exact solutions on three problems of NTO-EFMs. The assessments on statistical observations demonstrate the performance on different measures for the accuracy, consistency and stability of the proposed GANN-PSOAS solver.

Waveforms used in multiple‐input multiple‐output (MIMO) systems must be considered in such a way that individual transceiver (T‐R) pairs can be separated from the composite received signal. An algorithm called variational mode decomposition of coded beat‐frequency shifted signals (VMD‐CBFSS) is presented for waveform diversity. First, transmitters are divided into several groups. A small shift is applied to the carrier frequency of the transmitters of different groups. Also, signals within each group are encoded by assigning a binary phase in a time block. On the receiver side, by using a multiresolution analysis technique, the combined signal is decomposed into its main frequency components and then the composite signals of each group are decoded to retrieve each T‐R pair. VMD‐CBFSS provides an efficient solution in terms of overall transmitting time and sampling rate in addition to robustness against channel noise. Moreover, the algorithm is employed in a near‐field MIMO millimetre‐wave imaging system, and results are presented in the form of numerical simulations.

Internet of Things (IoT) has lately been presented as a new technological transformation in which things are connected via the Internet. Several sensors and devices create data and send vital signals constantly over sophisticated networks that allow machine-to-machine interactions and monitor and manage key smart-world infrastructures. Since huge amounts of data are generated, reducing the data access costs is a critical issue. Edge computing has been developed as a novel paradigm for solving IoT demands to reduce the rise in resource congestion. One of the most significant data management challenges in the IoT is selecting suitable replication things that minimize reaction time and cost. Therefore, our goal is to examine replica selection and placement techniques in IoT and edge computing. The findings revealed that the edge computing environment might significantly enhance system performance regarding access response time, prediction accuracy, effective network, and increased data availability. Furthermore, the results illustrate that data provenance is necessary to raise the accuracy of the data by. Also, the results showed that the most important challenge in data replication and placement techniques in IoT and edge computing was the availability of data and access response time.

A wearable C-shaped antenna based on a fabric material operating at 2.4 GHz frequency is proposed for use in flexible/wearable IoT medical systems. The wearable IoT device plays a key role in medical applications, and the antenna is a key part of it. Loading the presented antenna on the body models showed a frequency detuned with the gain and efficiency reduced from 1. 28 to −9 dB and 90% to 10%. In addition, the SAR did not meet the safety health requirement defined by the FCC or ICNIRP standards. Therefore, an “Artificial Magnetic Conductor” structure (AMC) is added to the C-shaped antenna to overcome these problems. The AMC acts as shielding material between the human skin and the presented antenna because of its 0° reflection phase, which mimics the action of the Perfect Magnetic Conductor (PMC). The overall size of the proposed design was 54 × 54 × 3.9 mm3. Numerical and experimental findings indicated that integrating the AMC structures with a C-shaped antenna was robust for body deformation and load. The C-shaped antenna worked equally well with the AMC, whether positioned in free space or on the chest or the arm of the human body. The integrated antenna with AMC structures has excellent performances. The gain and efficiency without loading on the chest were 6.49 dB and 84%, respectively. While for loaded on the chest were 6.21 dB and 81%, respectively. It also decreased the back radiation and raised the Front to Back Ration (FBR) by 13.8 dB. SAR levels have been reduced by more than 90% between the FCC and ICNIRP standards compared to the C-shaped antenna alone, which does not comply with the standards. As a result, the C-shaped integration with AMC structures is highly suitable for assembly in any wearable system. Supplementary Information The online version contains supplementary material available at 10.1007/s11276-021-02770-4.