Search

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

The purpose of this work is the development and validation of a Large Eddy Simulation (LES) model for the Aerodynamic’s Section at ESEIAAT in-house Vortex Cloud Method (VCM) fluid mechanics solver. The previous version of the program allowed for a less computationally expensive way to model 2D flow where separation or viscosity effects are important. The addition of a LES subroutine to this program allows studies in conditions where turbulence plays an important role. The subroutine was initially intended to be developed for a Fortran version of the ESEIAAT solver, which was optimised for performance. However, some problems with the Fortran version appearing at the testing stage required a switch to an older MATLAB version. The subroutine was rewritten in MATLAB code and the MATLAB version of the code adapted to accommodate it. Unfortunately, the MATLAB program had a much greater computational cost, which entailed a reduction of the scope of the validation of the program. Consequently, only preliminary validation of the program is carried out in the present work, comparing its performance with bibliographic data, both numerical and experimental. The results obtained are satisfactory and showed that the new LES version of the solver matches closely the results obtained by other similar programs. Despite this, there are still some aspects of the methodology that need more testing and adjustments before it could have full research use. Some questions also arose regarding the adequacy of the implemented LES turbulence model that are discussed in this work. This work has also highlighted the need of properly adjusting the program to each flow situation and has provided information on the different variables to be adjusted. Both physical and numerical (program stability and computational cost) considerations have to be taken into account for a successful adjustment.

This paper presents a study on the flow dynamics involving vehicle interactions. In order to do so, this study first explores aerodynamic prediction capabilities of popular turbulence models used in computational fluid dynamics simulations involving tandem objects and thus, ultimately presents a framework for CFD simulations of ground vehicle platooning using a realistic vehicle model, DrivAer. Considering the availability of experimental data, the simulation methodology is first developed using a tandem arrangement of surface-mounted cubes which requires an understanding on the role of turbulence models and the impacts of the associated turbulence model closure coefficients on the prediction veracity. It was observed that the prediction accuracy of the SST k−ω turbulence model can be significantly improved through the use of a combination of modified values for the closure coefficients. Additionally, the initial validation studies reveal the inability of the Unsteady Reynolds-Averaged Navier-Stokes (URANS) approach to resolve the far wake, and its frailty in simulating tandem body interactions. The Improved Delayed Detached Eddy Simulations (IDDES) approach can resolve the wakes with a reasonable accuracy. The validated simulation methodology is then applied to the fastback DrivAer model at different longitudinal spacing. The results show that, as the longitudinal spacing is reduced, the trailing car’s drag is increased while the leading car’s drag is decreased which supports prior explanations of vortex impingement as the reason for drag changes. Additionally, unlike the case of platooning involving Ahmed bodies, the trailing model drag does not return to an isolated state value at a two car-length separation. However, the impact of the resolution of the far wake of a detailed DrivAer model, and its implication on the CFD characterization of vehicle interaction aerodynamics need further investigations.

This paper deals with a mathematical modeling of flow stability of Newtonian and non-Newtonian fluids in the gap between two concentric cylinders, one of which rotates. A typical feature of the flow is the formation of a vortex flow, so-called Taylor vortices. Vortex structures are affected by the speed of the rotating cylinder and the physical properties of the fluids, i.e., viscosity and density. Analogy in terms of viscosity is assumed for non-Newtonian and magnetorheological fluids. Mathematical models of laminar, transient and turbulent flow with constant viscosity and viscosity as a function of the deformation gradient were formulated and numerically solved to analyze the stability of single-phase flow. To verify them, a physical experiment was performed for Newtonian fluids using visualizations of vortex structures-Taylor vortices. Based on the agreement of selected numerical and physical results, the experience was used for numerical simulations of non-Newtonian magnetorheological fluid flow. Web of Science 9 10 art. no. 1832

In deep ocean transportation pipeline, the swirling internal flow has a significant impact on the marine minerals transportation efficiency and safety. Therefore, the present work investigates various swirl flow motions for the slurry transport characteristics of the multi-sized particulate flow in a horizontal pipeline. Since the internal flow is a liquid-solid-solid mixture, a steady-state three-dimensional Eulerian-Eulerian multiphase approach in conjunction with the k-ω SST turbulence model is implemented for numerical simulation in the commercial CFD software ANSYS FLUENT 17.0. Numerical predictions of the mixture solid concentration distributions are generally in good conformance with experimental measurements. It is clearly revealed the transition of flow regime from heterogeneous to pseudo-homogeneous with the increasing level of swirl intensity at inlet. Compared to non-swirling flow, the swirling flow is of benefit to the multi-sized solid suspension capacity and the transportation efficiency. Moreover, the intense swirling vortex results in a strong influence on the characteristics of the lubrication layer formed by fine solid particles near the bottom of the pipe. These results provide valuable insights regarding the influence of swirl flow on the transport process for deep ocean mining.