Search

This study analyzes the blast resistance in triple-period minimal surface (TPMS) sandwich panel structures with a cellular structure. The explosion test of the TPMS sandwich panel was carried out, and experimental data verified the effectiveness of the finite element model. Four TPMS configurations, Diamond, Gyroid, IWP, and Primitive, were selected as the core of the sandwich panel to determine the dynamic response process of the TPMS sandwich panel under the action of a blast load. The effects of the thickness of the core material and the explosive charge on the blast resistance in the TPMS sandwich panel were investigated. The results show that the increase in core thickness reduces the blast energy absorption efficiency of the sandwich panel, and the energy resistance in the Diamond configuration sandwich panel is stronger than the other three configurations under the same blast load; the increase in explosive charge significantly increases the displacement of the sandwich panel, and the Gyroid configuration shows better energy absorption effect; different TPMS configurations and panel thickness have a significant effect on the deformation and energy absorption of the sandwich panel under the blast load. The results of this study can promote the application of TPMS sandwich structures in blast-resistant structures. [ABSTRACT FROM AUTHOR]

The explosion products, such as shock waves, fragments and heat energy formed by explosion, act on the plate structure, which may cause structural damage, material failure and even phase transformation of material. In this paper, the damage mechanism and protective effect of near-field blast load on sandwich structure based on foam-nickel core material were studied. Firstly, the near-field explosion test was conducted to investigate the blast response of the foam-nickel sandwich structure subjected to blast shock from 8701 explosive at near-field position. The deformation characteristics and stress history of the sandwich structure on the acting location of blast load were carefully investigated via experimental methods. A finite element model of near-field explosion was established for effective numerical modelling of the dynamic behaviour of the sandwich structure using the explicit dynamics software ANSYS/LS-DYNA for more comprehensive investigations of the blast shock response of the sandwich structure. The finite element model is reasonable and validated by mesh independence verification and comparing the simulated response behaviour to that from the experimental results for the sandwich structure subjected to near-field blast load. On this basis, the damage mechanism and protection effect of the near-field explosion impact on foam-nickel cores with different density and porosity are simulated more systematically. The investigated results from the experiments and a series of numerical simulations show the large deformation effect due to the extensive energy absorption, which suggests that the sandwich structure based on foam-nickel core material may be expected to become a new choice of protective structure under near-field blast load. [ABSTRACT FROM AUTHOR]

• Blast experiments were conducted to study the close-in blast effect and failure characteristics of honeycomb HSPs. • The blast performance of auxetic HSPs is compared with regular hexagonal HSPs. • Simulation is in good agreement with experiments and can describe the deformation and fracture damage. • The effect of the core type and unit-cell angle on the damage of HSPs is investigated. 3D-printed auxetic honeycomb sandwich panels (HSPs) have considerable potential for blast resistance enhancement. This study aims to bridge the gap with regard to the experimental data on the effect of 3D-printed auxetic hexagonal honeycomb cores on the blast response of HSPs. To this end, the blast resistance of HSPs developed using auxetic re-entrant and regular hexagonal honeycomb cores is investigated experimentally and numerically. First, six HSPs are tested under close-in blast loadings. The HSPs comprise Q345 steel top and bottom sheets as well as a honeycomb aluminum alloy core with two configurations (regular hexagonal and auxetic re-entrant). According to the results, the former configuration enhances the HSP blast resistance by not only decreasing the deformation of the HSPs but also improving their damage tolerance. In addition, the responses of the HSPs are numerically studied via finite element analysis. The numerical method using the finite element program LS-DYNA achieves reasonable accuracy. Finally, a parametric study is conducted to investigate the effects of the honeycomb type, cell angle, debonding effects, and core material on the blast resistance of the HSPs. The results demonstrate that employing auxetic hexagonal honeycomb core, smaller cell angle, and ductile core material can improve the blast resistance of HSPs. [ABSTRACT FROM AUTHOR]