Search

The exploration into nanomaterial-based nonenzymatic biosensors with superb performance in terms of good sensitivity and anti-interference ability in disease marker monitoring has always attained undoubted priority in sensing systems. In this work, we report the design and synthesis of a highly active nanocatalyst, i.e., palladium and platinum nanoparticles (Pt&Pd-NPs) decorated ultrathin nanoporous gold (NPG) film, which is modified on a homemade graphene paper (GP) to develop a high-performance freestanding and flexible nanohybrid electrode. Owing to the structural characteristics the robust GP electrode substrate, and high electrochemically catalytic activities and durability of the permeable NPG support and ultrafine and high-density Pt&Pd-NPs on it, the resultant Pt&Pd-NPs-NPG/GP electrode exhibits excellent sensing performance of low detection limitation, high sensitivity and anti-interference capability, good reproducibility and long-term stability for the detection of small molecular biomarkers hydrogen peroxide (H 2 O 2 ) and glucose (Glu), and has been applied to the monitoring of H 2 O 2 in different types of live cells and Glu in body fluids such as urine and fingertip blood, which is of great significance for the clinical diagnosis and prognosis in point-of-care testing.

This article presents the development of a photothermal biosensing integrated with microfluidic paper-based analytical device (PT-μPAD) as a quantitative biosensor method for monitoring sarcosine in human control urine, plasma, and serum samples. The device utilizes gold nanoparticles (AuNPs) as both a peroxidase-like nanozyme and a photothermal substrate to enable sarcosine detection. In our PT-μPAD, hydrogen peroxide (H 2 O 2 ) is generated through the oxidation of sarcosine by a sarcosine oxidase (SOx) enzyme. Subsequently, the H 2 O 2 flows through the paper microchannels to the detection zone, where it etches the pre-deposited AuNPs, inducing a temperature change upon exposure by a 532 nm laser. The temperature variation is then measured using a portable and inexpensive infrared thermometer. Under optimized conditions, we obtained a linear range between 10.0 and 40.0 nmol L -1  (R 2  = 0.9954) and a detection limit (LOD) of 32.0 pmol L -1 . These values fall within the clinical range for sarcosine monitoring in prostate cancer diagnostics in humans. Moreover, our approach exhibits high selectivity without interfering effects. Recovery studies in various human control samples demonstrated a range of 99.05-102.11 % with the highest RSD of 2.25 %. The PT-μPAD was further validated for sarcosine determination in human control urine and compared with a commercial ELISA assay, revealing no significant difference between these two methods at a 95 % confidence level. Overall, our proposed sarcosine biosensor is well-suited for prostate cancer monitoring, given its affordability, sensitivity, and user-friendliness, even for unskilled individuals. Moreover, this strategy has promising prospects for broader applications, potentially detecting various biomarkers as a point-of-care (POC) diagnostic tool., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Background: Alzheimer's disease (AD), one of the most prevalent neurodegenerative diseases, results in severe cognitive decline and irreversible memory loss. Early detection of AD is significant to patients for personalized intervention since effective cure and treatment methods for AD are still lacking. Despite the severity of the disease, existing highly sensitive AD detection methods, including neuroimaging and brain deposit-positive lesion tests, are not suitable for screening purposes due to their high cost and complicated operation. Therefore, these methods are unsuitable for early detection, especially in low-resource settings. Although regular paper-based microfluidics are cost-efficient for AD detection, they are restricted by a poor limit of detection (LOD)., Results: To address the above limitations, we report the ultrasensitive and low-cost nanocellulose paper (nanopaper)-based analytical microfluidic devices (NanoPADs) for detecting one of the promising AD blood biomarkers (glial fibrillary acidic protein, GFAP) using Surface-enhanced Raman scattering (SERS) immunoassay. Nanopaper offers advantages as a SERS substrate, such as an ultrasmooth surface, high optical transparency, and tunable chemical properties. We detected the target GFAP in artificial serum, achieving a LOD of 150 fg mL -1 ., Significance: The developed NanoPADs are distinguished by their cost-efficiency and ease of implementation, presenting a promising avenue for effective early detection of AD's GFAP biomarker with ultrahigh sensitivity. More importantly, our work provides the experimental routes for SERS-based immunoassay of biomarkers on NanoPADs for various diseases in the future., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Herein, a flexible near-infrared (NIR) light-actuated photoelectrochemical (PEC) lab-on-paper device was constructed toward miRNA-122 detection, utilizing the combination of DNA-programmed NaYF 4 /Yb,Tm upconversion nanoparticles (UCNPs) and the Z -scheme AgI/WO 3 heterojunction grown in situ on gold nanoparticle-decorated 3D cellulose fibers. The UCNPs were employed as light transducers for converting NIR light into ultraviolet/visible (UV/vis) light to excite the nanojunction. The multiple diffraction of NaYF 4 /Yb,Tm matched the absorption band of the Z -scheme AgI/WO 3 heterojunction, resulting in enhanced PEC photocurrent output. This prepared Z -scheme heterojunction effectively directed charge migration and highly facilitated the electron-hole pair separation. Target miRNA-122 activated the nonenzyme catalytic hairpin assembly signal amplification strategy, generating duplexes which caused the exfoliation of NaYF 4 /Yb,Tm UCNPs from the biosensor electrode and lowered the photocurrent under 980 nm irradiation. Under optimized circumstances, the proposed NIR-actuated PEC lab-on-paper device presented accurate miRNA-122 detection within a wide linear range of 10 fM-100 nM with a low limit of detection of 2.32 fM, providing a reliable strategy in the exploration of NIR-actuated PEC biosensors for low-cost, high-performance bioassay in clinical applications.

Glutathione (GSH) acts a crucial role in the normal operation of manifold life activities and is closely bound up with many human diseases. Here, a SERS-colorimetric bimodal paper-based biosensor based on Mn-doped CDs/silver nanoparticles (Mn-CDs/AgNPs) has been fabricated for high-efficiency quantification of intracellular GSH. The Mn-CDs/AgNPs with fine oxidase-like characteristic and SERS enhancement ability has been assembled onto the Whatman filter paper (WFP) to cleverly fabricate paper chip (Mn-CDs/AgNPs@WFP) which can trigger the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) into blue TMBox and simultaneously enhance the SERS signal of TMBox. However, the introduction of GSH inhibits the oxidation of TMB, leading to color fading of paper chip and diminishment of SERS signal. Considering this, the bimodal paper-based sensing platform can be exploited for SERS-colorimetric detection of GSH, manifesting excellent selectivity, reliable stability, and satisfactory precision. The detection limits of SERS and colorimetric detection modes are as low as 0.41 μM and 0.53 μM, respectively. Furthermore, this proposed bimodal biosensor has been successfully utilized for the determination of intracellular GSH and validated by commercial GSH assay kit, which provides a mighty and convenient tool for intracellular GSH detection and can boost future effort about exploitation of other multimode paper-based biosensors as well as promote their appliances in disease diagnosis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

MicroRNAs (miRNAs) have emerged as a promising class of biomarkers for early detection of various cancers, including ovarian cancer. However, quantifying miRNAs in human blood samples is challenging owing to the issues of sensitivity and specificity. In this study, hsa-miR-200a-3p of the miR-200a sub-family, which is a biomarker of ovarian cancer, was used as the analyte to demonstrate the analytical capability of an integrated biosensing platform using an extremely sensitive surface-enhanced Raman scattering (SERS) nanotag-nanoaggregate-embedded beads (NAEBs), magnetic nanoparticles (MNPs), a pair of highly specific locked nucleic acid (LNA) probes, and a semi-automated paper-based electrowetting-on-dielectric (pEWOD) device to provide labor-less and thorough sample cleanup and recovery. A sandwich approach where NAEBs are modified by one LNA-1 probe and MNPs are modified by another LNA-2 probe was applied. Then, the target analyte miRNA-200a-3p was introduced to form a sandwich nanocomplex through hybridization with the pair of LNA probes. The pEWOD device was used to achieve short cleanup time and good recovery of the nanocomplex, bringing the total analysis time to less than 30 min. The detection limit of this approach can reach 0.26 fM through SERS detection. The versatility of this method without the need for RNA extraction from clinical samples is expected to have good potential in detecting other miRNAs.

A label-free detection method for noninvasive biofluids enables rapid on-site disease screening and early-stage cancer diagnosis by analyzing metabolic alterations. Herein, we develop three-dimensional plasmonic hexaplex nanostructures coated on a paper substrate (3D-PHP). This flexible and highly absorptive 3D-PHP sensor is integrated with commercial saliva collection tube to create an efficient on-site sensing platform for lung cancer screening via surface-enhanced Raman scattering (SERS) measurement of human saliva. The multispike hexaplex-shaped gold nanostructure enhances contact with saliva viscosity, enabling effective sampling and SERS enhancement. Through testing patient salivary samples, the 3D-PHP sensor demonstrates successful lung cancer detection and diagnosis. A logistic regression-based machine learning model successfully classifies benign and malignant patients, exhibiting high clinical sensitivity and specificity. Additionally, important Raman peak positions related to different lung cancer stages are investigated, suggesting insights for early-stage cancer diagnosis. Integrating 3D-PHP senor with the conventional saliva collection tube platform is expected to offer promising practicality for rapid on-site disease screening and diagnosis, and significant advancements in cancer detection and patient care., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier B.V. All rights reserved.)

The precise detection of pathogenic microorganisms is crucial for the reduction of water-borne diseases. Herein, a filter-paper-based florescent chemosensor was fabricated for the detection of Escherichia coli and Staphylococcus aureus contamination exploiting protein-DNA interaction between the target and a specific probe. The sensing mechanism involved the self-assembly of Rhodamine B (RhB) on silver nanoparticles (AgNPs) surface that was labeled with a single-stranded DNA probe. This causes the fluorescence quenching of RhB by a distant-dependant process. The hybridization between pathogen-specific probe and bacterial surface protein causes the release of fluorescence of RhB, which was observed under UV light. For paper-based bio-surface preparation, the mixture comprising RhB-AgNP-ssDNA was drop-casted on filter paper discs. The conditions were optimized using isolated genomic DNA of the microbes. The method was applied for E.coli detection using an eae gene-based probe targeting intimin protein and S. aureus detection using tuf gene-based probe targeting EF-tuf protein on the microbe's surface. The chemosensor had a notable specificity and selectivity for E.coli, and S. aureus, with detection limits of 0.6 × 10 8 and 0.37 × 10 3  CFU/mL respectively. Moreover, the sensor was tested on real water samples, which presented excellent reproducibility of results (RSD ≤ 0.24%). Furthermore, the gradient change of fluorescence was captured by a smartphone, which allows direct detection of pathogens in a sensitive semi-quantitative way without the need for expensive instruments. The designed chemosensor can serve as a simple, inexpensive, and rapid method for the on-site detection of microbial contamination in drinking water., (© 2023. The Author(s), under exclusive licence to Springer Nature Switzerland AG.)

Detecting sputum pyocyanin (PYO) with a competitive immunoassay is a promising approach for diagnosing Pseudomonas aeruginosa respiratory infections. However, it is not possible to perform a negative control to evaluate matrix-effects in competitive immunoassays, and the highly complex sputum matrix often interferes with target detection. Here, we show that these issues are alleviated by performing competitive immunoassays with a paper biosensor. The biosensing platform consists of a paper reservoir, which contains antibody-coated gold nanoparticles, and a substrate containing a competing recognition element, which is a piece of paper modified with an albumin-antigen conjugate. Detection of PYO with a limit of detection of 4.7·10 -3  µM and a dynamic range between 4.7·10 -1  µM and 47.6 µM is accomplished by adding the sample to the substrate with the competing element and pressing the reservoir against it for 5 min. When tested with patient samples, the biosensor was able to qualitatively differentiate spiked from non-spiked samples, whereas ELISA did not show a clear cut-off between them. Furthermore, the relative standard deviation was lower when determining sputum with the paper-based biosensor. These features, along with a mild liquefaction step that circumvents the use of harsh chemicals or instruments, make our biosensor a good candidate for diagnosing Pseudomonas infections at the bedside through the detection of sputum PYO., (© 2023. The Author(s).)

Fumonisin B1 (FB1), as one of the highest toxicity mycotoxins, poses a serious threat to animal and human health, even at low concentrations. It is significant and challenging to develop a sensitive and reliable analytical device. Herein, a paper-based electrochemical aptasensor was designed utilizing tetrahedral DNA nanostructures (TDNs) to controllably anchor an aptamer (Apt), improving the recognition efficiency of Apt to its target. First, gold nanoparticles (AuNPs)@MXenes were used as a sensing substrate with good conductivity and modified on the electrode for immobilization of complementary DNA-TDNs (cDNA-TDNs). In the absence of FB1, numerous Apt-Au@Pt nanocrystals (NCs) was hybridized with cDNA and assembled on the sensing interface, which accelerated the oxidation of TMB with H 2 O 2 and produced a highly amplified differential pulse voltammetry (DPV) signal. When the target FB1 specifically bound to its Apt, the electrochemical signal was decreased by releasing the Apt-Au@Pt NCs from double-stranded DNA (dsDNA). On account of the strand displacement reaction by FB1 triggering, the aptasensor had a wider dynamic linear range (from 50 fg/mL to 100 ng/mL) with a lower limit of detection (21 fg/mL) under the optimized conditions. More impressively, the designed FB1 aptasensor exhibited satisfactory performance in corn and wheat samples. Therefore, the TDN-engineered sensing platform opens an effective approach for sensitive and accurate analysis of FB1, holding strong potential in food safety and public health.

A dual-mode lab-on-paper device based on BiVO 4 /FeOOH nanocomposites as an efficient generating photoelectrochemical (PEC)/colorimetric signal reporter has been successfully constructed by integration of the lab-on-paper sensing platform and PEC/colorimetric detection technologies for sensitive detection of carcinoembryonic antigen (CEA). Concretely, the BiVO 4 /FeOOH nanocomposites were in situ synthesized onto the paper-working electrode (PWE) through hydrothermal synthesis of the BiVO 4 layer on cellulose fibers (paper-based BiVO 4 ) which were initially modified by Au nanoparticles for improving the conductivity of three dimensional PWE, and then the photo-electrodeposition of FeOOH onto the paper-based BiVO 4 to construct the paper-based BiVO 4 /FeOOH for the portable dual-mode lab-on-paper device. The obtained nanocomposites with an FeOOH needle-like structure deposited on the BiVO 4 layer exhibits enhanced PEC response activity due to its effective separation of the electron-hole pair which could further accelerate the PEC conversion efficiency during the sensing process. With the introduction of CEA targets onto the surface of nanocomposite-modified PWE assisted by the interaction with the CEA antibody from a specific recognition property, a signal-off PEC signal state with a remarkable photocurrent response decreasing trend can be achieved, realizing the quantitative detection of CEA with the PEC signal readout mode. By means of a smart origami paper folding, the colorimetric signal readout is achieved by catalyzing 3,3',5,5'-tetramethylbenzidine (TMB) to generate blue oxidized TMB in the presence of H 2 O 2 due to the satisfied enzyme-like catalytic activity of the needle-like structure, FeOOH, thereby achieving the dual-mode signal readout system for the proposed lab-on-paper device. Under the optimal conditions, the PEC and colorimetric signals measurement were effectively carried out, and the corresponding linear ranges were 0.001-200 ng·mL -1 and 0.5-100 ng·mL -1 separately, with the limit of detection of 0.0008 and 0.013 ng·mL -1 for each dual-mode. The prepared lab-on-paper device also presented a successful application in serum samples for the detection of CEA, providing a potential pathway for the sensitive detection of target biomarkers in clinical application.

Analysis of cytokines levels in human serum is critical as it can be a "symptom diagnostic biomarker" in COVID-19, giving real-time information about human health status. Here, we present the construction and performance of a low-price immunosensor (∼US$0.428 per test) based on microfluidic paper-based system to detect cytokine for predicting the health status of COVID-19 patients. Interleukin-6 (IL-6) was selected as the detection model for the close relationship between IL-6 and COVID-19. The assay, which we integrated into foldable paper system, leverages the magnetic immunoassay, the streptavidin-horseradish peroxidase (HRP) associated with tetramethyl benzidine/hydrogen peroxide (TMB/H 2 O 2 ) to amplify the signal for electrochemical readout. To improve the sensitivity of cytokine detection, a hybrid of gold nanoparticles (AuNPs) and polypyrrole (PPy) hydrogel was modified on the working electrode to increase the conductivity and improve the electron transfer rate. With our prototypic origami paper-based immunosensor operated in differential pulse voltammetry (DPV) mode, we achieved excellent results with a dynamic range from 5 to 1000 pg/mL and a lower detection limit (LOD) of 0.654 pg/mL. Furthermore, we evaluated the capability of the clinical application of the proposed immunosensor using human serum samples from a hospital. The results indicate that our proposed immunosensor has great potential in early diagnosing high-risk COVID-19 patients., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Practical human biofluid sensing requires a sensor device to differentiate patients from the normal group with high sensitivity and specificity. Label-free molecular identification from human biofluids allows direct classification of abnormal samples, providing insights for disease diagnosis and finding of new biomarkers. Here, we introduce a label-free surface-enhanced Raman scattering sensor based on a three-dimensional plasmonic coral nanoarchitecture (3D-PCN), which has strong electromagnetic field enhancement through multiple hot spots. The 3D-PCN was synthesized on a paper substrate via direct one-step gold reduction, forming a coral-like nanoarchitecture with high absorption property for biofluids. This was fabricated as a urine test strip and then integrated with a handheld Raman system to develop an on-site urine diagnostic platform. The developed platform successfully classified the human prostate and pancreatic cancer urines in a label-free method supported by two types of deep learning networks, with high clinical sensitivity and specificity. Our technology has the potential to be utilized not only for urinary cancer diagnosis but also for various human biofluid sensing systems as a future point-of-care testing platform., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

The prevalence of fentanyl abuse raises global public health concerns with an unprecedented surge in overdose deaths. Rapid identification and quantification of fentanyl in biofluids is of paramount importance to combat fentanyl abuse for law enforcement agencies and promptly treat patients for medical professionals. Herein, a freestanding surface-enhanced Raman spectroscopy (SERS) biosensor with excellent condensing enrichment capability, termed FrEnSERS biosensor, is reported for quantitative label-free detection of trace fentanyl in biofluids. This biosensor comprises a reduced graphene oxide membrane decorated with high-density hydrophobic Au nanostars. A combination of the high SERS enhancement and the focusing effect for analyte enrichment of the hydrophobic surface accounts for the remarkable SERS performance of the FrEnSERS biosensor. We demonstrate that the FrEnSERS biosensor achieves the sensitive and quantitative detection of fentanyl in both serum and urine over a wide dynamic range spanning more than 4 orders of magnitude, with a limit of detection of 0.47 ng/mL for serum samples and 0.73 ng/mL for urine samples. Our biosensor is sensitive, cost-effective, and reliable for rapid quantitative analysis of fentanyl in biofluids with great promise for forensic analysis and clinical diagnosis.

Herein, a ratiometric electrochemiluminescence (ECL) lab-on-paper platform, based on enhancing effect of the N-(4-aminobutyl)-N-ethylisoluminol-functionalized glutathione-coated cobalt/gold bimetallic nanoclusters (GCAL) and quenching effect of carbon quantum dots (CQDs), as well as benefiting from high conductivity copper paper electrode, was developed to achieve accurate and sensitive analysis of DNA methylation. Concretely, due to one-to-multiple amplification effect, one target DNA could initiate the formation of supersandwich structure with multiple signal probes labeled with GCAL. Thus, the GCAL signal enhancement effect was realized. Simultaneously, multiple signal probes are connected to hinder the electron conduction rate on the electrode surface, which results in the quenching of CQDs signal. With the method proposed here, wide linear relationship in the range of 1 fM to 10 pM with a low detection limit of 0.27 fM for sensitive detecting methylated DNA was achieved. It is believed that this work provided a rapid, low-cost and stabilized method for specific determination of methylated DNA, and the immediate detection of cancer in the clinic will become possible in the future., (Copyright © 2022 Elsevier B.V. All rights reserved.)

In this study, we demonstrate how palladium@platinum nanoparticles (Pd@Pt NPs) can be used as a nanozyme for the detection of Staphylococcus aureus (S. aureus) on a paper-based analytical device. Pt was doped with Pd to form bimetallic NPs that serve as a peroxidase mimetic, which can enhance the reaction area with a substrate (3, 3', 5, 5'-tetramethylbenzidine, TMB). After material characterization, we show the peroxidase-like activity of the Pd@Pt NPs featured a 13-times higher binding affinity value (K m ) for TMB compared to horseradish peroxidase, which is currently widely used in immunoassays. By incorporating the Pd@Pt NPs in a paper-based immunoassay, we can detect protein A, the biomarker of S. aureus, within 30 min with a detection limit of 9.56 ng/mL. We have also successfully validated this nanozyme-immobilized paper-based analytical device (nPAD) for the detection of human immunoglobulin G to demonstrate the capability of the Pd@Pt NPs for different target analytes. This highly sensitive, rapid, and portable nPAD design has the potential for personalized medicine and point-of-care testing, which could expand on-site prognoses in resource-limited settings., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Herein, a paper-based glucose/air biofuel cell (BFC) was constructed and implemented for self-powered pesticide detection. Our developed paper-based chip relies on a hollow-channel to transport fluids rather than capillarity, which reduces analysis times as well as physical absorption. The gold nanoparticles (Au NPs) and carbon nanotubes (CNTs) were adapted to modify the paper fibers to fabricate the flexible conductive paper anode/cathode electrode (Au-PAE/CNT-PCE). Molecularly imprinted polymers (MIPs) using 2,4-dichlorophenoxyacetic acid (2,4-D) as a template were synthesized on Au-PAE for signal control. In the cathode, bilirubin oxidase (BOD) was used for the oxygen reduction reaction. Based on a competitive reaction between 2,4-D and glucose-oxidase-labeled 2,4-D (GOx-2,4-D), the amount of GOx immobilized on the bioanode can be simply tailored, thus a signal-off self-powered sensing platform was achieved for 2,4-D determination. Meanwhile, the coupling of the paper supercapacitor (PS) with the paper-based chip provides a simple route for signal amplification. Combined with a portable digital multi-meter detector, the amplified signal can be sensitively readout. Through rational design of the paper analytical device, the combination of BFC and PS provides a new prototype for constructing a low-cost, simple, portable, and sensitive self-powered biosensor lab-on-paper, which could be easily expanded in the field of clinical analysis and drug delivery.

Nowadays, developing a cost-effective, easy-to-operate, and efficient signal amplification platform is of important to microfluidic paper-based analytical devices ( μ PAD) for end-use markets of point-of-care (POC) assay applications. Herein, an ultrasensitive, paper-based photoelectrochemical (PEC) bioassay platform is constructed by in situ grown ZnO/ZnIn 2 S 4 heterojunctions onto paper fibers, which acted as photoactive signal amplification probes for enhancing the sensitivity of antibodies-based diagnostic assays, for the sensitive detection of alpha-fetoprotein (AFP) targets. The crystalline flake-like ZnIn 2 S 4 composited with hexagonal nanorods (NRs) morphology of ZnO is an in situ grown, at the first time, onto cellulose fibers surface supported with Au nanoparticle (Au NP) modification to improve conductivity of the device working zone. The obtained composites on paper fibers are implemented as a flexible paper-based photoelectrode to realize remarkable performance of the fabricated μ PAD, resulting from the enhanced PEC activity of heterojunctions with effective electron-hole pair separation for accelerating photoelectric conversion efficiency of the sensing process under light irradiation. Once the target AFP was introduced into the biosensing interface assistant, with a specific recognition interaction of AFP antibody, a drastically photocurrent response was generated, in view of the apparent steric effects. With the concentration increase of AFP targets, more immune conjugates could be confined onto the biosensing interface, eventually leading to the quantitative decrease of photocurrent intensity. Combined with an ingenious origami design and permitting the hydrophobic/hydrophilic conversion procedure in the bioassay process, the ultrasensitive PEC detection of AFP targets was realized. Under the optimized conditions, the level of AFP could be sensitively tracked by the prepared μ PAD with a liner range from 0.1 to 100 ng mL -1 and limit of detection of 0.03 ng mL -1 . This work provides a great potential application for highly selective and sensitive POC testing of AFP, and finally, developments for clinical disease diagnosis.

Amanitin (AMA) is responsible for human fatalities after ingestion of poisonous mushrooms, thus, a rapid and accurate detection method is urgently needed. Here, gold nanoparticle-based immunosensor with monoclonal antibody against AMA was constructed for rapid detection of alpha- and beta-amanitin (α- and β-AMA) in mushroom, serum and urine samples. Under optimized conditions, the visual limits of detection (vLOD) and calculated LOD for α-AMA and β-AMA in mushroom were 10 ng/g, 20 ng/g, and 0.1 ng/g, 0.2 ng/g, respectively. Analysis of wild mushroom samples was also performed using a strip scan reader in the 10 min range. Furthermore, in mushrooms containing amatoxins results were confirmed and compared with those determined by liquid chromatography tandem mass spectrometry. Thus, this immunosensor provided a useful monitoring tool for rapid detection and screening of mushroom samples and in serum and urine from subjects who accidentally consumed AMA-containing mushrooms., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

This article reports a facile fabrication of a highly sensitive enzyme-free sweat glucose sensor over Whatman filter paper substrate employing a dual-step pencil and pen approach. Initially, two pencil-drawn electrodes (PDEs) are obtained on the filter paper through the manual abrasion of an 8B graphite pencil. Then, the sensing layer is drawn over one of the PDEs using a custom-made copper (Cu) nanoparticle ink (CuNP-ink) pen to form copper nanoparticle ink decorated PDE (CuNP-ink/PDE) which serves as a working electrode, while the other PDE is drawn with silver conductive ink (Ag-ink) pen to form reference electrode. The developed CuNP-ink/PDE is composed of 43.5% of metallic Cu nanoparticles, inducing a highly crystalline and conductive nature, thus promoting fast electron transfer during glucose electrooxidation. The developed sensor offers a sensitivity of 2691.7 μAmM -1 cm -2 , a detection limit of 0.5 μM, a linear range of 1.2-40 μM, and a fast response time of ∼ 1.5 s. Besides, the sensor measurements are stable, reproducible, and selective in glucose sensing. Also, the reliability of the sensor is tested by comparing its performance with a UV-Visible spectrophotometer for proving its efficacy in sweat glucose detection. Experimental results evince the effectiveness of the designed sensor for glucose detection in human sweat., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Amarprit Singh reports financial support was provided by Department of Science and Technology, Govt. of India., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A novel electrochemical paper-based microfluidic chip was firstly developed to simultaneously detect cadmium (Ⅱ) and lead (Ⅱ) in vegetable and fruit samples. The patterned filter paper was prepared through the printing of three-electrode patterns on filter paper using an automatic screen-printing machine. Portable and low-cost (less than $1) electrochemical paper-based chips are prepared by filling conductive ink and hot pressing. The paper-based chip could realize signal amplification through gold nanoparticles and seed solutions. Cadmium (Ⅱ) and lead (Ⅱ) were sensitively detected by their aptamers labeled with methylene blue and ferrocene, separately. Under the optimal experimental parameters, the paper-based chip detected cadmium (Ⅱ) and lead (Ⅱ) as low as 23.31 and 46.23 pmol/L (3σ) with a wide linear range from 0.1 to 1000 nmol/L and exhibited excellent selectivity. The RSD was 6.41% (cadmium (Ⅱ)) and 4.20% (lead (Ⅱ)). Compared with other methods, the paper-based chip could complete the detection within 15 min and could be stored at -20 °C for 5 days. Furthermore, the results for vegetable and fruit samples were agreed with the results of the graphite furnace atomic absorption spectrophotometer, in which the recovery rates were 93.20%-95.80%., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Herein, a hand-drawing paper-based bipolar electrode (BPE) electrochemiluminescence (ECL) platform for M.SssI methyltransferase (M.SssI MTase) assay was proposed via employing high electrocatalytic Pt@CeO 2 as an ECL co-reaction accelerator and pencil-drawing graphite electric circuits as wires and electrodes. Notably, the introduction of pencil-drawing trace not only simplified the manufacturing process but also reduced the cost and saved fabricating time. Meanwhile, Pt@CeO 2 with good electrocatalytic activity and satisfactory chemical stability was used at the anode of the closed BPE-ECL device to accelerate the oxidation rate of uric acid. Due to the balanced charges of the bipolar electrode, the ECL response of the MnS: CdS@ZnS/S 2 O 8 2- system emitted on the cathode was enhanced. In situ growth of gold nanoparticles in the two electrode areas was convenient for DNA immobilization. With the above points in mind, the specific DNA double strands functionalized via Pt@CeO 2 were employed to identify M.SssI MTase. The unmethylated DNA double strands were cut by Hpa II endonuclease, resulting in the quenching of the ECL signal. Under the optimal conditions, sensitive detection of M.SssI MTase in a wide linear range of 0.01-100 U·mL -1 was realized. The reliable and versatile BPE-ECL tool for the determination of M.SssI MTase with easy-to-operate pencil-drawing traces and independent solution systems provides a new opportunity to develop paper-based devices applied in early disease diagnosis and pathogenesis research.-1 was realized. The reliable and versatile BPE-ECL tool for the determination of M.SssI MTase with easy-to-operate pencil-drawing traces and independent solution systems provides a new opportunity to develop paper-based devices applied in early disease diagnosis and pathogenesis research.

In this work, novel dual-mode lab-on-paper devices based on in situ grown WO 3 /BiVO 4 heterojunctions onto cellulose fibers, as signal amplification probes, were successfully fabricated by the integration of photoelectrochemical (PEC)/colorimetric analysis technologies into a paper sensing platform for the ultrasensitive detection of alpha-fetoprotein (AFP). Specifically, to achieve an impressive PEC performance of the lab-on-paper device, the WO 3 /BiVO 4 heterojunction was in situ grown onto the surface of cellulose fibers assisted with Au nanoparticle (Au NP) functionalization for enhancing the conductivity of the working zone of the device. With the target concentration increased, more immune conjugates could be captured by the proposed paper photoelectrode, which could lead to a quantitative decrease in the photocurrent intensity, eventually realizing the accurate PEC signal readout. To meet the requirement of end-user application, a colorimetric signal readout system was designed for the lab-on-paper device based on the color reaction of 3,3'5,5'-tetramethylbenzidine (TMB) oxidized by WO 3 /BiVO 4 nanoflowers in the presence of H 2 O 2 . Noticeably, it is the first time that the WO 3 /BiVO 4 heterojunction is in situ grown onto cellulose fibers, which enhances the sensitivity in view of both their PEC activity and catalytic ability. By controlling the conversion process of hydrophobicity and hydrophilicity on the lab-on-paper device combined with diverse origami methods, the dual-mode PEC/colorimetric signal output for the ultrasensitive AFP detection was realized. Under optimal conditions, the proposed dual-mode lab-on-paper device could enable the sensitive PEC/colorimetric diagnosis of AFP in the linear range of 0.09-100 ng mL -1 and 5-100 ng mL -1 with the limit of detection of 0.03 and 1.47 ng mL -1 , respectively.

Escherichia coli O157:H7 (E. coli O157:H7) is a typical foodborne pathogen that contaminates food and water, leading to lots of infectious diseases. In this study, a near-infrared-responsive photoelectrochemical (PEC) sensing platform for the ultrasensitive detection of E. coli O157:H7 was established by assembling a flexible conductive paper electrode with core-shell-structured upconversion nanophosphors (UCNPs) @SiO 2 @Ag and carbon self-doped graphitic carbon nitride (C-g-C 3 N 4 ). In this design, UCNPs act as a self-powered that change near infrared (NIR) excitation into visible emission, while the semiconductor material C-g-C 3 N 4 acts as the energy-conversion center to convert visible illumination to photocurrent. Importantly, silver nanoparticles (AgNPs) significantly enhance the upconversion luminescence of UCNPs and facilitate the separation and transportation of photoelectrons by the localized surface plasmon resonance effect. Using the antimicrobial peptide Magainin I as the recognition element, E. coli O157:H7 was specifically captured and determined directly for its steric hindrance effect on the photoelectrode. As a result, the photocurrent decreased linearly with the increase in E. coli O157:H7 in a wide range from 5 to 5 × 10 6  colony-forming units per mL (CFU/mL), and the detection limit was as low as 2 CFU/mL. Finally, the proposed NIR PEC sensor was successfully utilized for the determination of E. coli O157:H7 in contaminated pork, cabbage, and milk samples without enrichment of the bacteria in 50 min., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Paper-based biosensors featuring immunoconjugated gold nanoparticles have gained extraordinary momentum in recent times as the platform of choice in key cases of field applications, including the so-called rapid antigen tests for SARS-CoV-2. Here, we propose a revision of this format, one that may leverage on the most recent advances in materials science and data processing. In particular, we target an amplifiable DNA rather than a protein analyte, and we replace gold nanospheres with anisotropic nanorods, which are intrinsically brighter by a factor of ~ 10, and multiplexable. By comparison with a gold-standard method for dot-blot readout with digoxigenin, we show that gold nanorods entail much faster and easier processing, at the cost of a higher limit of detection (from below 1 to 10 ppm in the case of plasmid DNA containing a target transgene, in our current setup). In addition, we test a complete workflow to acquire and process photographs of dot-blot membranes with custom-made hardware and regression tools, as a strategy to gain more analytical sensitivity and potential for quantification. A leave-one-out approach for training and validation with as few as 36 sample instances already improves the limit of detection reached by the naked eye by a factor around 2. Taken together, we conjecture that the synergistic combination of new materials and innovative tools for data processing may bring the analytical sensitivity of paper-based biosensors to approach the level of lab-grade molecular tests., (© 2022. The Author(s).)

Selective detection and quantification of biomarkers related to human diseases are essential for preventive healthcare. Surface-enhanced Raman scattering (SERS) spectroscopy is a powerful analytical tool offering high sensitivity. However, the success of this promising analytical tool relies on the ability to effectively fabricate SERS substrate. Herein we have demonstrated a plasmonic paper-based flexible substrate (PPFS) for SERS sensing. In situ growth of silver nanostructures (AgNS) on the paper-based substrate was achieved by using a simple one-step silver mirror reaction (SMR). FESEM and TEM results depicts that the increasing silver ion content influences the morphology (growth of multifacets), as well as size of AgNS. Further, the PPFS substrate was tested with Rhodamine-6G (Rh-6G) dye and an attomole sensitivity with a LOD of 4.54 × 10 -18 M was achieved. Further, two biomarkers, lactic acid (LA) and uric acid (UA) were detected on the PPFS substrate, with [Formula: see text] and pM sensitivity, having LOD values of 0.6 × 10 -6 and 0.3 × 10 -12 M respectively. Above detection levels for UA on PPFS is two orders better than reported values, whereas for LA it is comparable with reported substrates. Finally, UA, LA and their mixtures were tested on PPFS and results compared with commercial substrate. The performance of PPFS were found better in all cases, thus, multifaceted AgNS paper based PPFS offers the potential to be used as a biosensor for detection of various biomarkers from body fluids, responsible for the detection of the critical disease for preventive health care.

This work presents a novel cellulose-based aptasensor for the colorimetric detection of a cancer biomarker, osteopontin (OPN), in point-of-care (PoC) analysis. For this purpose, the cellulose paper was chemically modified with (mercaptopropyl)methyldimetoxisilane to attach the thiolated aptamer, which acts as a biological detection layer. The surface modification was checked by Fourier transform infrared spectroscopy and thermogravimetric analysis. Colorimetric detection was performed using a conventional staining solution, Bradford reagent. The color analysis was performed by evaluating the RGB coordinates provided by the ImageJ program from the photographs taken with a smartphone. Overall, the biosensor shows good sensitivity with a wide linear range (R > 0.998) of 5-1000 ng/mL and a detection limit lower than 5 ng/mL in buffer and commercial human serum solution, after 30 min of incubation. In addition, this aptasensor shows good selectivity to some interfering species such as bovine serum albumin and recombinant OPN. Analytical data obtained from spiked serum samples confirm the accuracy of the method. Importantly, it is a broad-spectrum method that tends to meet the criteria of REASSURED (real-time connectivity, ease of sampling, affordability, specificity, ease of use, speed and robustness, device freedom, and deliverability) for global testing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

A new paper-based lateral flow nucleic acid (LFNA) test platform was established in this study using asymmetric polymerase chain ceaction (A-PCR) for signal amplification. This new method allowed a visual detection of Epstein-Barr virus (EBV) nucleic acids with high specificity and low cost. In addition, as part of our strategy we employed a sandwich system of capture probe (CP)/gold nanoparticles (AuNPS) and silicon dioxide (SiO2) (AuNPS@SiO2) nanospheres/target DNA/avidin complexes as the sensing platform. Biotin-labeled target DNA was obtained by A-PCR and later introduced in the LF device. The CP/target DNA/AuNPS@SiO2 complexes were captured on the test zone by the specific reaction between biotin and avidin, and the remaining CP/AuNPS@SiO2 particles were captured on the quality control zone by the hybridization between CP and a quality control probe. Au@SiO2 accumulation in the test and quality control zones of the device enabled a visual detection of the specific target sequences. The method detection limit was 50 nM of the target DNA, which was lower than that of the LFNA biosensor (LFNAB) without PCR amplification and Au@SiO2 particles. In conclusion, the novel paper-based platform described here is a low cost, efficient and fast visual detection method that offers high sensitivity and other benefits compared to alternative methods in use., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Both programmed death-1 (PD-1) and programmed death-ligand 1 (PD-L1) are important proteins in cancer immunotherapy. Soluble forms (sPD-1 and sPD-L1) have potential for determining treatment and prognosis monitoring. However, there is a lack of detection methods for point-of-care testing (POCT) of these two proteins, so a low-cost rapid detection platform is urgently needed. To solve this problem, a dual-channel electrochemical platform, including a folding paper-based immunosensor and a POCT system for rapid simultaneous detection of these two proteins was designed and fabricated. The immunosensor consists of a three-electrode system and a reaction cell. The surface of the working electrode was modified with nanocomposites synthesized from amine-functionalized single-walled carbon nanotubes, new methylene blue, and gold nanoparticles. Antibodies to sPD-1 and sPD-L1 were also immobilized on the working electrode surface. A differential pulse voltammetry electrochemical method was adopted. The immunosensor was able to detect sPD-1 and sPD-L1 in the ranges of 50 pg/mL to 50 ng/mL and 5 pg/mL to 5 ng/mL, respectively. The limits of detection were 10 and 5 pg/mL. Using this detection platform, sPD-1 and sPD-L1 in plasma were detected by both enzyme-linked immunosorbent assay and the immunosensor, which has good application potential.

Currently, developing versatile, easy-to-operate, and effective signal amplification strategies hold great promise in photoelectrochemical (PEC) biosensing. Herein, an ultrasensitive polyvinylpyrrolidone-treated In 2 S 3 /WO 3 (In 2 S 3 -P/WO 3 )-functionalized paper-based PEC sensor was established for sensing ochratoxin A (OTA) based on a target-driven self-feedback (TDSF) mechanism enabled by a dual cycling tactic of PEC chemical-chemical (PECCC) redox and exonuclease III (Exo III)-assisted complementary DNA. The In 2 S 3 -P/WO 3 heterojunction structure with 3D open-structure and regulable topology was initially in situ grown on Au nanoparticle-functionalized cellulose paper, which was served as a universal signal transducer to directly record photocurrent signals without complicated electrode modification, endowing the paper chip with admirable anti-interference ability and unexceptionable photoelectric conversion efficiency. With the assistance of Exo III-assisted cycling process, a trace amount of OTA could trigger substantial signal reporter ascorbic acid (AA) generated by the enzymatic catalysis of alkaline phosphatase, which could effectively provoke the PECCC redox cycling among the tris(2-carboxyethyl)phosphine acid, AA, and ferrocenecarboxylic at the In 2 S 3 -P/WO 3 photoelectrode, initiating TDSF signal amplification. Based on the TDSF process induced by the Exo III-assisted recycling and PECCC redox cycling strategy, the developed paper-based PEC biosensor realized ultrasensitive determination of OTA with persuasive selectivity, high stability, and excellent reproducibility. It is believed that the proposed paper-based PEC sensing platform exhibited enormous potential for the detection of other targets in bioanalysis and clinical diagnosis.

A visual detection method was proposed for polychlorinated biphenyls (PCBs) detection using lateral flow test paper as the sensing platform. The aptamer sequence was used to recognize the target 3,3',4,4'-tetrachlorobiphenyl (PCB77). The integration of Zn 2+ -dependent DNAzyme with toehold-mediated strand displacement reaction significantly improved the response signals. Gold nanoparticles were utilized as the signal tracers in the test paper, making the results visible directly by the naked eye. Under optimal conditions, the paper enables the visual detection of PCB77 as low as 10 pM without additional instrumentation. The assay displays a high selectivity for PCB77 against potential interfering molecules. The visual test paper is robust and has been applied to the detection of PCB77 in milk samples with good recovery and satisfactory accuracy. Using two different PCBs (PCB77 and PCB72) as inputs, we further fabricated OR and AND logic gates, which is conducive to the development of an intelligent detection strategy for PCBs monitoring. Given the attractive characteristics of disposability, low cost, logic operation, and intuitive output, the test paper shows great promise for on-site screening of PCBs in resource-limited areas.

It is very important to develop a rapid, simple, low cost point-of-care (POC) method for the early diagnosis of pathogens. In this work, a flexible paper-based electrode based on nickel metal-organic framework (Ni-MOF) composite/Au nanoparticles/carbon nanotubes/polyvinyl alcohol (Ni-Au composite/CNT/PVA) was constructed to detect target human immunodeficiency virus (HIV) DNA by DNA hybridization using methylene blue (MB) as a redox indicator. The CNT/PVA and Ni-Au composite were deposited on the cellulose membrane by vacuum filtration and drop-coating method in turn to obtain Ni-Au composite/CNT/PVA (CCP) film electrode. Compared to the CNT/PVA film electrode, CCP film electrode makes a higher loading of the probe DNA for its large specific surface area and conjugated π-electron system that can provide hydrogen bond sources to achieve interactions between MOF and single-stranded DNA, which improves the sensitivity for detecting target DNA. The variation of peak current for MB molecules adsorbed onto DNA before and after hybridization with HIV DNA was monitored. Electrochemical results proved that the CCP film maintained stable electrochemical property even after bending 200 times or stretching under different strains from 0% to 20%. The flexible paper electrode showed excellent sensing performance with a linear range of 10 nM-1 μM and a low detection limit of 0.13 nM. The target HIV DNA was successfully detected even in complex serum samples using the flexible CCP film electrode. Therefore, the simple and inexpensive flexible paper-based MOF composite film electrode can also be utilized for other pathogens POC diagnosis., (Copyright © 2021. Published by Elsevier B.V.)

Paper-based biosensors are considered simple and cost-efficient sensing platforms for analytical tests and diagnostics. Here, a paper-based electrochemical biosensor was developed for the rapid and sensitive detection of microRNAs (miRNA-155 and miRNA-21) related to early diagnosis of lung cancer. Hydrophobic barriers to creating electrode areas were manufactured by wax printing, whereas a three-electrode system was fabricated by a simple stencil approach. A carbon-based working electrode was modified using either reduced graphene oxide or molybdenum disulfide nanosheets modified with gold nanoparticle (AuNPs/RGO, AuNPs/MoS 2 ) hybrid structures. The resulting paper-based biosensors offered sensitive detection of miRNA-155 and miRNA-21 by differential pulse voltammetry (DPV) in only 5.0 µL sample. The duration in our assay from the point of electrode modification to the final detection of miRNA was completed within only 35 min. The detection limits for miRNA-21 and miRNA-155 were found to be 12.0 and 25.7 nM for AuNPs/RGO and 51.6 and 59.6 nM for AuNPs/MoS 2 sensors in the case of perfectly matched probe-target hybrids. These biosensors were found to be selective enough to distinguish the target miRNA in the presence of single-base mismatch miRNA or noncomplementary miRNA sequences.

Botulinum neurotoxins (BoNTs) produced by soil bacterium Clostridium botulinum are cause of botulism and listed as biohazard agents, thus rapid screening assays are needed for taking the correct countermeasures in a timely fashion. The gold standard method relies on the mouse lethality assay with a lengthy analysis time, i.e., 2-5 days, hindering the prompt management of food safety and medical diagnosis. Herein, we propose the first paper-based antibody-free sensor for reliable and rapid detection of BoNT/A and BoNT/C, exploiting their cleavage capability toward a synthetic peptide able to mimic the natural substrate SNAP-25. The peptide is labelled with the electroactive molecule methylene blue and immobilized on the paper-based electrode modified with gold nanoparticles. Because BoNT/A and BoNT/C can cleave the peptide with the removal of methylene blue from electrode surface, the presence of these neurotoxins in the sample leads to a signal decrease proportional to BoNT amount. The biosensor developed with the selected peptide and combined with smartphone assisted potentiostat is able to detect both BoNT/A and BoNT/C with a linearity up to 1 nM and a detection limit equal to 10 pM. The applicability of this biosensor was evaluated with spiked samples of orange juice, obtaining recovery values equal to 104 ± 6% and 98 ± 9% for 1 nM and 0.5 nM of BoNT/A, respectively., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Kirigami is one of the interesting paper art forms and the modified sub-class of origami. Kirigami paper art is widely employed in a variety of applications, and it is currently being used in biosensors because of its outstanding advantages. This is the first study on the use of a Kirigami-based aptasensor for DENV (Dengue virus)-antigen detection. In this study, the kirigami approach has been utilized to develop a stretchable, movable, and flexible sensor. The constructed stretchable-kirigami electrode helps in adjusting the connection of electrodes without disturbing the electrochemical cell zone during the experiment. To increase the sensitivity of this biosensor we have synthesized Ag-NPs (Silver nanoparticles) via chemical methods and characterized their results with the help of TEM & UV-Vis Spectroscopy. Different electrochemical approaches were used to validate the sensor response i.e., CV (Cyclic voltammetry) and LSV (Linear sweep voltammetry), which exhibited great detection capability towards dengue virus with the range of 0.1 µg/ml to 1000 µg/ml along with a detection limit of 0.1 µg/ml and showing no reactivity to the chikungunya virus antigen, making it more specific to the DENV antigen. Serum (healthy-human) was also successfully applied to validate the results of the constructed aptasensor. Integration of the Kirigami approach form with the electrochemical aptasensor that utilizes a 3-E setup (three-electrode setup) which is referred to as a tripod and collectively called Kirigami-tripod-based aptasensor. Thus, the developed integrated platform improves the sensors capabilities in terms of cost efficiency, high stretchability, and sensitivity., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The unique properties of plasmonic nanoparticles and nanostructures have enabled a broad range of applications in a diverse set of fields, ranging from biological sensing, cancer therapy, to catalysis. They have been some of the most studied nanomaterials due in part to their chemical stability and biocompatibility as well as supporting theoretical efforts. The synthesis and fabrication of plasmonic nanoparticles and nanostructures have now reached high precision and sophistication. We review here their fundamental optical properties, discuss their tailoring for biological environments, and then detail examples on how they have been used to innovate in the biological and biomedical fields., (© 2023. The Author(s), under exclusive license to Springer Nature Switzerland AG.)

Self-powered immunosensors (SPIs) based on enzymatic biofuel cell (EBFC) have low sensitivity and poor stability due to the high impedance of the immune sandwich and the vulnerability of enzymes to environmental factors. Here, we applied the Faraday cage-type sensing mode on a hybrid biofuel cell (HBFC)-based SPI for the first time, which exhibited high sensitivity and stability. Cytokeratin 19 fragment (CYFRA 21-1) was used as a model analyte. Au nanoparticle-reduced graphene oxide (Au-rGO) composite was used as the supporting matrix for immunoprobe immobilized with detection antibody and glucose dehydrogenase (GDH), also the builder for Faraday cage structure on the bioanode in the presence of antigen. After the combination of immunoprobe, antigen, and the antibody on the bioanode, the Faraday cage was constructed in case the AuNP-rGO was applied as a conductive cage for electron transfer from GDH to the bioanode without passing through the poorly conductive protein. With the assistance of the Faraday cage structure, the impedance of the bioanode decreased significantly from 4000 to 300 Ω, representing a decline of over 90%. The sensitivity of the SPI, defined as the changes of open circuit voltage (OCV) per unit concentration of the CYFRA 21-1, was 68 mV [log (ng mL -1 )] -1 . In addition, Fe-N-C was used as an inorganic cathode material to replace enzyme for oxygen reduction reaction (ORR), which endowed the sensor with 4-week long-term stability. This work demonstrates a novel sensing platform with high sensitivity and stability, bringing the concept of hybrid biofuel cell-based self-powered sensor., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

An ochratoxin A (OTA) electrochemical biosensor based on a cascade signal amplification strategy with Ag nanoparticles (AgNPs) and ring opening polymerization (ROP) was constructed. The large specific surface area of AgNPs was used to increase the loading of OTA aptamer on the electrode surface, enhancing the ability to capture OTA as a way to achieve the first signal amplification. The OTA antibody modified with polyethylenimine specifically recognizes the OTA, forming an aptamer-OTA-antibody sandwich structure. The amino group on polyethylenimine initiates the ROP reaction with α-amino acid-n-carboxylic anhydride-ferrocene (NCA-Fc) as the monomer. A large number of electrochemical signal units of ferrocene are introduced into the sensing system for a second signal amplification. By amplifying the signal twice, the sensitivity of the sensor is improved. Under the optimal conditions, the detection range of the sensor is 1 pg·mL -1  ~ 1 μg·mL -1 , while the detection limit is as low as 117 fg·mL -1 . Moreover, the sensor has the advantages of high sensitivity, good stability and selectivity. Standard addition recovery experiment proved that the sensing system can be successfully used for the detection of OTA in four actual samples with recoveries in the range 90.0 to 113% with RSDs of 0.6 to 5.2%, providing a new idea for the pollution assessment of mycotoxins., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

A sensitive electrochemical strategy for carcinoembryonic antigen 15-3 (CA15-3) detection is reported using CTAB-Co-MOFs@AuPt NPs as signal probes. The electrochemical strategy was designed as follows: First, the graphene aerogel@gold nanoparticles (GA@Au NPs) nanocomposites were employed to modify the sensing surface for promoting electron transfer rate and primary antibody (Ab 1 ) immobilization due to GA possesses a large specific surface area, eminent conductivity, and a 3D network structure. Cobalt metal-organic frameworks (CTAB-Co-MOFs) synthesized were then used as a carrier for AuPt NPs and secondary antibody (Ab 2 ) immobilization (notes: labelled-Ab 2 ). With sandwich immunoreaction, the labelled-Ab 2 was captured on the surface of the GA@Au NPs nanocomposites. Finally, differential pulse voltammetry (DPV) was employed to register the electrochemical signal of the immunosensor at the potential of - 0.85 V (vs SCE) in phosphate buffer saline (PBS) containing 2.5 mM H 2 O 2 . It was verified that the electrochemical reduction signal from Co 3+ to Co 2+ was recorded. The AuPt NPs could catalyze the reaction of H 2 O 2 oxidizing Co 2+ to Co 3+ , resulting in the amplification of the electrochemical signal. Under the selected conditions, the immunosensor can detect CA15-3 in the range 10 µU/mL to 250 U/mL with a low detection limit of 1.1 µU/mL. In the designed strategy, the CTAB-Co-MOFs were not only employed as carriers for AuPt NPs, but also acted as signal probes. The CTAB-Co-MOFs were investigated including SEM, TEM, XPS, and XRD. The application ability of the immunosensor was evaluated using serum sample, demonstrating the immunosensor can be applied to clinic serum analysis., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

The influenza virus is a pervasive pathogen that exhibits increased prevalence during colder seasons, resulting in a significant annual occurrence of infections. Notably, pharmaceutical interventions effective against influenza A strains often exhibit limited efficacy against influenza B variants. Against this backdrop, the need for innovative approaches to accurately and swiftly differentiate and detect influenza B becomes evident. Biosensors play a pivotal role in this detection process, offering rapid, specific, and sensitive identification of the virus, facilitating timely intervention and containment efforts. Oligonucleotide sequences targeting the conserved B/Victoria/2/87 influenza virus NP region were designed. Nasopharyngeal swabs were collected from patients suspected of influenza virus infection, and viral RNA was extracted. RNA quality was assessed through one-step PCR. cDNA synthesis was performed using random hexamers, and real-time PCR quantified the influenza genome. Gold nanoparticles were immobilized on a surface to immobilize the specific DNA probe, and electrochemical hybridization was electrochemically followed. The biosensor exhibited high selectivity and effective distinction of complementary sequences from mismatches and influenza virus cDNA genome. The biosensor successfully detected the influenza B virus genome in real samples. Non-influenza samples yielded no significant hybridization signals. The comparison between the results obtained from the biosensor and real-time PCR revealed full agreement of these methods. The biosensor utilized electrochemical detection of hybridization and proved effective in detecting the influenza B virus genome with high specificity, sensitivity, and selectivity. Comparative analysis with real-time PCR underscored the accuracy and potential applicability of the biosensor in rapid and specific virus detection. This innovative approach holds promise for future diagnostic and epidemiological applications in detecting influenza B virus and other pathogens., (© 2023 John Wiley & Sons Ltd.)

We report a sensitive lateral flow assay (LFA) in which the assay colour change originated from reporter labels constructed from silica spheres (radius = 450 nm) coated with approximately 3.9 × 10 3 gold nanoparticles (radius = 8.5 nm). These reporter labels were modified with DNA and deposited in the conjugation area of an LFA device assembled on wax-patterned Fusion 5 paper. Test and control zones of the device were pre-loaded with capture probe formed by avidin-coated mesoporous silica nanoparticles attached with biotin-tagged DNA sequences. Proof-of-concept was demonstrated by the detection of a partial sequence of the actin gene of Colletotrichum truncatum. The DNA target could be detected with an LOD of 46 pM, which was 5 times lower than a comparative assay using gold nanoparticles alone. The assay showed good selectivity against the Colletotrichum species C. scovillei and C. gloeosporioides, as well as against DNA from the fungal genera Aspergillus niger and Alternaria alternata. There was negligible change in sensor response over storage for one month at room temperature. The LFA was used to detect PCR products following extraction from mycelium., Competing Interests: Declaration of competing interest The authors have no conflicting interests in this research., (Copyright © 2023 Elsevier Inc. All rights reserved.)

After optimizing the original aptamer sequence by truncation strategy, a magnetic separation-assisted DNAzyme-driven 3D DNA walker fluorescent aptasensor was developed for detecting the food-borne pathogen Cronobacter species. Iron oxide magnetic nanoparticles (MNPs) modified with a hybrid of truncated aptamer probe and DNAzyme strand (AP-E1) denoted as MNPs@AP-E1, were employed as capture probes. Simultaneously, a DNAzyme-driven 3D-DNA walker was utilized as the signal amplification element. The substrate strand (Sub) was conjugated with the gold nanoparticles (AuNPs), resulting in the formation of AuNPs@Sub, which served as a 3D walking track. In the presence of the target bacteria and Mg 2+ , E1-DNAzyme was activated and moved along AuNPs@Sub, continuously releasing the signal probe. Under optimized conditions, a strong linear correlation was observed for Cronobacter sakazakii (C. sakazakii) in the concentration range 10 1 to 10 6 CFU mL -1 , with a low detection limit of 2 CFU mL -1 . The fluorescence signal responses for different Cronobacter species exhibited insignificant differences, with a relative standard deviation of 3.6%. Moreover, the aptasensor was successfully applied to determine  C. sakazakii in real samples with recoveries of 92.86%-108.33%. Therefore, the novel method could be a good candidate for ultra-sensitive and selective detection of Cronobacter species without complex manipulation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Austria, part of Springer Nature.)

Cancer antigen 125 (CA125) is the most common biomarker used to diagnose and monitor ovarian cancer progression for the last four decades, and precise detection of its levels in blood serum is crucial. In this work, label-free impedimetric CA125 immunosensors were fabricated by using screen-printed carbon electrodes modified with poly toluidine blue (PTB) (in deep eutectic solvent)/gold nanoparticles (AuNP) for the sensitive, environmentally friendly, economical, and practical analysis of CA125. The materials of PTB DES and AuNP were characterized by Fourier Transform Infrared (FT-IR), Scanning Electron Microscope (FE-SEM), and X-ray Diffraction (XRD). The analysis of the CA125 was performed by electrochemical impedance spectroscopy and the developed immunosensor. The immunosensor's repeatability, reproducibility, reusability, selectivity, and storage stability were examined. The developed label-free immunosensor allowed the determination of CA125 in fast, good repeatability and a low limit of detection (1.20 pg mL -1 ) in the linear range of 5-100 pg mL -1 . The stable surface of the fabricated immunosensor was successfully regenerated ten times. The application of immunosensors in commercial human blood serum was performed, and good recoveries were achieved. The disposable label-free impedimetric CA125 immunosensor developed for the rapid and practical detection of CA125 is a candidate for use in point-of-care tests in clinical applications of ovarian cancer., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Alpha-fetoprotein (AFP) is inextricably linked to various diseases, including liver cancer. Thus, detecting the content of AFP in biology has great significance in diagnosis, treatment, and intervention. Motivated by the urgent need for affordable and convenient electronic sensors in the analysis and detection of aqueous biological samples, we combined the solution-gated graphene transistor (SGGT) with the catalytic reaction of enzyme nanoprobes (HRP-AuNPs-Ab2) to accurately sense AFP. The SGGT immunosensor demonstrated high specificity and stability, excellent selectivity, and excessive linearity over a range of 4 ng/mL to 500 ng/mL, with the lower detection limit down to 1.03 ng/mL. Finally, clinical samples were successfully detected by the SGGT immunosensor, and the results were consistent with chemiluminescence methods that are popular in hospitals for detecting AFP. Notably, the SGGT immunosensor is also recyclable, so it has excellent potential for use in high-throughput detection., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Cancer antigen 125 (CA125) and human epididymal secretory protein 4 (HE4) are critical biomarkers for ovarian cancer diagnosis and progression monitoring; therefore, sensitive determination of their levels in body fluids is crucial. In recent study, label-free CA125 and HE4 immunosensors were prepared using disposable screen-printed carbon electrodes modified with reduced graphene oxide, polythionine, and gold nanoparticles for the sensitive, fast, and practical determination of CA125 and HE4. Differential pulse voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy methods were used for the electrochemical determination of antigens in four different linear ranges (1-100 pg mL - 1 , 0.01-10 ng mL - 1 , 10-50 ng mL - 1, and 50-500 ng mL - 1 ). High sensitivity, low limit of detection, and limit of quantification were obtained for each linear range with a correlation coefficient above 0.99. The application stability of CA125 and HE4 immunosensors was determined as 60 days, and the storage stability was determined as 16 weeks. Immunosensors showed high selectivity in nine different antigen mixtures. The reusability of the immunosensors has been tested up to 9 cycles. The Risk of Ovarian Malignancy Algorithm score% values were calculated using the concentration of CA125 and HE4 in the blood serum and evaluated in terms of ovarian cancer risk. For the point-of-care testing, CA125 and HE4 levels at pg mL - 1 concentration were measured in blood serum samples using the developed immunosensors and a hand-held electrochemical reader in approximately 20-30 s, and high recoveries were obtained. These disposable label-free immunosensors are user-friendly and can be used in point-of-care tests for rapid and practical detection of CA125 and HE4 with high selectivity, sensitivity, and repeatability., (© 2023. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

The blood levels of cancer antigen 125 (CA125) and human epididymal secretory protein 4 (HE4) are measured in the diagnosis and progression monitoring of ovarian cancer (OC), and the Risk of Ovarian Malignancy Algorithm (ROMA) score% values are calculated for cancer risk assessment. For the first time, disposable dual screen-printed carbon electrodes modified with reduced graphene oxide, polythionine, and gold nanoparticles were used to fabricate label-free electrochemical dual CA125-HE4 immunosensors for the sensitive, fast, and practical simultaneous determination of CA125 and HE4. DPV and SWV methods were used to simultaneously determine antigens in two different linear ranges (1-100 pg mL -1 and 1-50 ng mL -1 ). High sensitivity, low LOD, and LOQ were obtained for two linear ranges with a correlation coefficient above 0.99. The application stability of the dual CA125-HE4 immunosensors was determined as 60 days, and the storage stability was determined as 16 weeks. The dual immunosensors exhibited high selectivity in eight different antigen mixtures. The reusability of the dual immunosensors has been tested up to 9 cycles. ROMA score% values for pre-menopausal and post-menopausal status were calculated using the concentration of CA125 and HE4 in the blood serum and assessing OC risk. The disposable dual immunosensors can be used in point-of-care tests for rapid and practical simultaneous determination of CA125 and HE4 with high selectivity, sensitivity, and repeatability., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

A novel deep learning-enabled smartphone platform is developed to assist a colorimetric aptamer biosensor for fast and highly sensitive detection of dimethoate. The colorimetric determination of dimethoate is based on the specific binding of dimethoate and aptamer, which leads to the aggregation of AuNPs in high-concentration NaCl solution, resulting in an obvious color change from red to blue. This color change provides sufficient data for self-learning enabled by a convolutional neural network (CNN) model, which is established to predict dimethoate concentration based on images acquired from a smartphone. To enhance user-friendliness for non-experts, the CNN model is then embedded into a smartphone app, enabling offline detection of dimethoate pesticide in real environments within just 15 min using a pre-configured colorimetric probe. The developed platform exhibits superior performance, achieving a regression coefficient of 0.9992 in the concentration range of 0-10 μM. Moreover, the app's performance is found to be consistent with the ELISA kit. These remarkable findings demonstrate the potential of combining colorimetric biosensors with smartphone-based deep learning methods for the development of portable and affordable tools for pesticide detection., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH, DE part of Springer Nature.)

Herein, an ultrasensitive electrochemical biosensor for microRNA-155 (miR-155) detection based on the powerful catalytic and continuous walking signal amplification capability of 3D DNAzyme walker and the gold nanoparticles/graphene aerogels carbon fiber paper-based (AuNPs/GAs/CFP) flexible sensing electrode with excellent electrochemical performance was successfully constructed. In a proof-of-concept experiment, in the presence of miR-155, the DNAzyme strands anchored on the streptavidin-modified magnetic beads (MBs) silenced by locked strands can be activated, thus generating the walking arm of the 3D DNAzyme walker. Meanwhile, the substrate strands modified with Fe-MOF-NH 2 nanoparticles were evenly distributed on the surface of MBs and served as tracks of the 3D DNAzyme walker. Once the DNAzyme strand was activated, the catalytic site in the substrate strand can be cleaved in the presence of Mn 2+ , and a large number of stumps modified with Fe-MOF-NH 2 nanoparticles (output@Fe-MOF-NH 2 ) will be generated during the continuous and efficient walking cleavage of the DNAzyme walker, driving the recognition-catalysis-release cycle process for signal amplification. Immediately afterwards, the signal was read out through the base complementary pairing of capture probe (PS) immobilized on the surface of the paper-based flexible sensing electrode AuNPs/GAs/CFP and signal probes output@Fe-MOF-NH 2 , thus achieving the quantitative detection of miR-155. Under optimal experimental conditions, the designed 3D DNAzyme walker-based biosensor exhibited a relatively lower limit of detection (LOD) of 56.23 aM, with a linear range of 100 aM to 100 nM. Overall, the proposed 3D DNAzyme walker biosensor exhibited good interference and reproducibility, demonstrating a promising future in the field of clinical disease diagnosis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier B.V.)

An assembled-aptasensor based on Fe 3 O 4 @Au@Ag nanocomposites grafting onto the gold foil was prepared, which can be developed into a universal approach for sensitive and rapid detection of various pathogenic bacteria, such as Escherichia coli (E. coli), Salmonella typhimurium (S. typhimurium), Staphylococcus aureus (S. aureus), Listeria monocytogenes (L. monocytogenes), Pseudomonas aeruginosa (P. aeruginosa), and Shigella flexneri (S. flexneri). Firstly, the gold foil paper was modified with thiolated capture probe and SERS tag in proportion, and at the same time, the specific thiolated aptamer probe for corresponding pathogenic bacteria was fixed with Fe 3 O 4 @Au@Ag nanocomposites. An obvious Raman signal can be subsequently increased about 10 6 times by the external electromagnetic field enhancement at the "hot spots" caused by the hybridization of aptamer and capture probe. But in the presence of target pathogenic bacteria, Raman intensity will decrease as Fe 3 O 4 @Au@Ag nanocomposites are dissociated from gold foil. Thus, all of the concentrations of the six kinds of pathogenic bacteria both in PBS and liquorice extract showed an obvious negative linear correlation with the Raman intensity of SERS tag in the range of 10-10 7  CFU/mL with detection limits were all lower than 10 CFU/mL. And there was no significant difference between our method and the plate counting method. Besides, the assembled-aptasensor had superior specific recognition ability even in the mixed interfering bacteria. Our study showed that this assembled-aptasensor had good specific detection ability to a variety of foodborne pathogens based on magnetic field-assisted SERS technique, which can be used for rapid and sensitive detection of a variety of pathogens in complex substrates., (© 2023. Springer-Verlag GmbH Germany, part of Springer Nature.)

Achieving the early diagnosis of breast cancer, through ultrasensitive detection of tumor marker miRNA-155, is a significant challenge. Therefore, an ultrasensitive hairpin electrochemical biosensor based on graphite-like phase carbon nitride composite was proposed. In this paper, poly(D-glucosamine) (PDG) was used as a stabilizer and reducing agent to prepare gold nanoparticles at room temperature, and then a graphite-like phase with a two-dimensional lamellar structure carbon nitride was further combined with it to obtain the poly(D-glucosamine)/gold nanoparticles/graphite-like phase carbon nitride nanocomposite (PDG/AuNPs/g-C 3 N 4 ), in order to achieve the goal of signal amplification. The specific hairpin capture probe (HP) that recognized and bound miRNA-155 was then grafted. The hairpin biosensor showed a linear range of 0.1 fM-1 pM with a detection limit of 0.05 fM using differential pulse voltammetry (DPV) electrochemical analysis. Furthermore, the excellent performance hairpin electrochemical biosensor had been applied to the detection of miRNA-155 in human serum samples with good recovery., (© 2022. Springer-Verlag GmbH Germany, part of Springer Nature.)