Search

A novel windmill‐shaped metasurface (MTS) structure is firstly presented and applied to realise broadband antennas with stable radiation patterns. Different from conventional square MTS structure, the proposed windmill‐shaped MTS structure is formed by etching several triangular sawtooth slots instead of rectangular slots on the radiating square patch. Through the characteristic mode analysis, it can be found that the proposed MTS structure exhibits a much stable broadside radiation within a large bandwidth of 45.9%. Besides, the tapered edges resulted from the sawtooth slots can be regarded as smoother transitions, which would bring a better impedance matching. Based on above analysis, two antennas with different aperture sizes using the proposed windmill‐shaped MTS are well designed accordingly. Both antennas demonstrate the capability to achieve large impedance bandwidths over 40% and stable radiations (2‐dB gain bandwidth >33%). Compared with the conventional MTS‐based antenna, these proposed antennas improve the bandwidth and radiation performances effectively, showing great promises for modern wireless communication systems. [ABSTRACT FROM AUTHOR]

A low-profile and shared aperture dual-polarized (DP) omnidirectional antenna by reusing the structure of an annular quasi-dipole array is presented. The proposed antenna consists of a center-fed circular patch antenna, an annular quasi-dipole array, a wideband one-to-four power divider integrated with the center-fed circular patch antenna, and two annular strips. The center-fed circular patch antenna is utilized as the driven element for the vertically polarized (VP) radiation. The annular quasi-dipole array fed by the one-to-four power divider produces horizontally polarized (HP) radiation. Simultaneously, it also acts as the VP director to improve VP gain and bandwidth. Besides, the two annular strips enhance the HP omni-directivity and gain. In this way, the VP and HP share the same aperture to improve the profile utilization rate effectively. Due to the symmetry of the basic antenna structure, stable DP donut patterns are obtained within the entire operating bandwidth. For demonstration, a 4.1–5.0 GHz prototype is designed, fabricated, and measured. Under a low profile of $0.13\lambda _{0}$ , the prototype realizes a −10 dB overlapped bandwidth of 20%, high port isolation of above 35 dB, and stable DP donut patterns with horizontal gain larger than 1.8 dBi. [ABSTRACT FROM AUTHOR]

A planar bidirectional circularly polarized (CP) antenna using orthogonal magnetic dipoles (OMDs) without an extra phase shift line is proposed in this work. It consists of a rectangular microstrip magnetic dipole antenna (MMDA) and a loop radiator with two arms directly connected to the open edge of MMDA. The working principle is revealed by the equivalent sources model to provide a clear physical insight at first. The theoretical investigations imply that by controlling the width and the feed locations of the loop antenna on the aperture, the phase and magnitude for CP radiation can be realized in both endfire and backfire directions without introducing an additional phase shift line structure. For demonstration, one antenna prototype is designed and fabricated. The experimental results indicate that an overlapping bandwidth of 5.91% from 2.30 to 2.44 GHz is attained. Compared with the counterpart using OMDs, the proposed antenna exhibits a low design complexity and improved gains of 3.56/1.83 dBic in the endfire/backfire directions. [ABSTRACT FROM AUTHOR]

This communication presents a new multiband multiarray (MBMA) scattering suppression antenna configuration for a dual-band and dual-polarized antenna array with reduced radiation distortion. The proposed antenna array configuration consists of a low-band (LB) antenna element working in the 690–960 MHz band and four high-band (HB) antenna elements working in the 1.7–2.7 GHz band. The LB antenna introduces U-shape structures to the radiation element to neutralize HB scattering currents. On the other hand, the HB antenna involves an LC resonant structure between its radiation arm and feeding balun to suppress LB scattering currents. An antenna array using the proposed LB and HB elements is designed to achieve MBMA functions. Experimental results show that the radiation distortions in both LB and HB bands are improved significantly. The VSWR of less than 1.5, the isolation of more than 25 dB, and the symmetrical radiation pattern are obtained in both bands. [ABSTRACT FROM AUTHOR]