Search

Due to the majority of time people spent indoors, indoor air quality is not only critical to people's health, comfort, but can also significantly influence occupants perception on indoor environment. Air quality is closely related to many factors including thermal parameters, pollutant concentrations, and ventilation performance. However, the current building indoor air quality evaluation method is based the objective measurement of indoor parameters, without considering occupants' subjective perception. This paper is aimed at summarizing a profound review on the PAQ evaluation method. Comparisons among various PAQ evaluating methods with advantages, similarities and differences were conducted. Analysis of literatures about indoor air quality in Chinese residential buildings field is also summarized, and discussion on the subjective influence of temperature and relative humidity, ventilation performance, volatile organic compounds (VOCs) concentration, and particulate matters on perceived air quality is carried out. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the effect of two circulation modes of a plasma deodorization unit on the air environment of pig-fattening houses in winter. Two pig-fattening houses were selected, one of which was installed with a plasma deodorizing device with two modes of operation, alternating internal and external circulation on a day-by-day basis. The other house did not have any form of treatment and was used as the control house. Upon installing the system, this study revealed that in the internal circulation mode, indoor temperature and humidity were sustained at elevated levels, with the NH3 and H2S concentrations decreasing by 63.87% and 100%, respectively, in comparison to the control house. Conversely, in the external circulation mode, the indoor temperature and humidity remained subdued, accompanied by a 16.43% reduction in CO2 concentration. The adept interchange between these two operational modes facilitates the regulation of indoor air quality within a secure environment. This not only effectively diminishes deleterious gases in the pig-fattening house but also achieves the remote automation of environmental monitoring and hazardous gas management; thereby, it mitigates the likelihood of diseases and minimizes breeding risks. [ABSTRACT FROM AUTHOR]

Air pollution is caused by chemical, physical, or biological components alters the fundamental properties of the atmosphere, and contaminates the interior or outdoor settings. With the rapid industrialization activity in recent years, there is an urgent need to monitor air quality. The proposed research provides a mechanism for monitoring air pollution in indoor and outdoor environments. The system consists of an IoT-based Arduino device. The Arduino IDE connects the Temperature and Humidity sensor, Grove light sensor, and air quality sensor to measure the air pollutants such as Carbon dioxide CO2, Nitrogen oxide (NOx), and Particulate Matter PM2.5. The sensors work efficiently and provide qualitative findings from the environment when they are exposed to CO2, gasoline, solvents, thinner, formaldehyde, and other harmful chemicals. The Wi-Fi module of the Blues Wireless Notehub is used for secure data routing to the IoT cloud. The Air Quality Index (AQI) measures provide information on whether there is something unsafe in indoor and outdoor environments. For collecting and analyzing the device data, the Notecard is intended to be used with a cloud storage service. Also, the indoor fire detector identifies the incident of fire intimates the users through the alarm, and measures the indoor pollutant at that time. The proposed smart IoT product model would be an excellent device for air quality monitoring because of its long-term consistency and low electricity consumption. [ABSTRACT FROM AUTHOR]

Knowledge of indoor air quality (IAQ) in cob buildings during the first few months following their delivery is of vital importance in preventing occupants' health problems. The present research focuses on evaluating IAQ in cob buildings through a prototype built in Normandy, France. To achieve this, the prototype was equipped with a set of sensors to monitor various parameters that determine indoor and outdoor air quality. These parameters include relative humidity (RH), carbon dioxide (CO2), nitrogen dioxide (NO2), ozone (O3), particulate matter (PM1 and PM10), and volatile organic compounds (VOCs). The obtained experimental results indicate that, overall, there is good indoor air quality in the prototype building. However, there are some noteworthy findings, including high indoor RH and occasional spikes in CO2, PM1, PM10, and VOCs concentrations. The high RH is believed to be a result of the ongoing drying process of the cob walls, while the peaks in pollutants are likely to be attributed to human presence and the earthen floor deterioration. To ensure consistent good air quality, this study recommends the use of a properly sized Controlled Mechanical Ventilation system. Additionally, this study explored IAQ in the cob building from a numerical perspective. A Long Short-Term Memory (LSTM) model was developed and trained to predict pollutant concentrations inside the building. A validation test was conducted on the CO2 concentration data collected on-site, and the results indicated that the LSTM model has accurately predicted the evolution of CO2 concentration within the prototype building over an extended period. [ABSTRACT FROM AUTHOR]

The quality of air conditioning and ventilation systems in laboratories is vital to ensure optimum health of the users and guarantee the accuracy of experiments conducted. Moreover, recent studies show that the average quality of air conditioning and ventilation systems in labs can pose health risks to occupants. The study aims to examine the relationship between physical parameters and microbial pollutants in research laboratories' indoor air quality (IAQ) by quantifying and characterising the bacteria and fungi in the indoor environment of research laboratories using the settle plate method; whereby our Petri dishes containing media are exposed to the air for sample collection. This study was conducted over the course of 3 ​day ​at three different research laboratories: Virology Lab (VL), Genetic Lab (GL), and Aquatic Lab (AL). The physical parameters such as air temperature, humidity and carbon dioxide were measured using FLUKE 975 air meter, whereas the microbial parameters were assessed using the settle plate method with Tryptone Soya agar and Sabouraud Dextrose agar for the bacterial and fungal count, respectively. Our results showed that the high temperature and relative humidity, exceeded the standard threshold for temperature (23–26 ​°C) and relative humidity (40–70%) set by the Department of Occupational Safety and Health (DOSH). Additionally, because of poor air conditioning and ventilation system maintenance, there were high total bacterial counts in GL (CFU/m³ 234.34 ​± ​30.93) and total fungal counts in VL (CFU/m³ 589.34 ​± ​53.03). We also showed that the most commonly isolated bacteria and fungi in research laboratories were Staphylococcus spp. (72.2%) and Cladosporium spp. (76.7%). In conclusion, we reported that there was a correlation between the physical parameters and microbial pollutants in the research laboratories. Therefore, regular monitoring of indoor air quality (IAQ) parameters and maintenance of the air conditioning and ventilation system should be carried out to ensure a good and safe indoor environment in research laboratories. [ABSTRACT FROM AUTHOR]

People tend to spend considerable amounts of time in buildings; thus the issue of providing proper indoor environmental quality is of significant importance. This paper experimentally analyses the subjective sensations of the occupants of intelligent and traditional buildings with the focus on possible differences between these two types of buildings. The study is based on a large database of 1302 questionnaires collected in 92 rooms where simultaneous measurements of the indoor environment physical parameters (air and globe temperature, relative humidity, carbon dioxide concentration, and illuminance) were carried out. Their impact on the subjective assessment of the indoor environment has been presented and analysed. The results show that the occupants seemed to be more favourable towards the indoor conditions in the intelligent building; however, the differences in comparison to the traditional buildings were not considerable. Similarly, self-reported productivity proved to be higher in the intelligent building, while the optimal range of air temperature, which ensured highest productivity, was 22–25 °C. Moreover, a strong correlation between the occupants' overall comfort and their perception of the air quality has been found. [ABSTRACT FROM AUTHOR]

People spend most of their time in indoor environments without knowing about the air quality in these spaces. In this study, indoor low-cost sensors were used (for 5 months) to assess the comfort and air quality patterns in two indoor households. To strengthen the robustness of the considered approach and build confidence in the obtained comfort and indoor air quality (IAQ) levels, the sensor measurements were also compared against information from reference monitoring equipment; in which, high correlation coefficients were obtained (> 0.85) and also low errors (on average 22%). The IAQ results were strongly influenced by the residents' activity and behaviour, the outdoor weather conditions, and indoor/outdoor air pollution sources. Overall, the recommended values of temperature and relative humidity for the occupant's comfort in indoor environments were not fulfilled. The highest particulate matter (PM) levels were recorded at the weekend (on average +14% higher), while maximum CO2 and CO levels were obtained on the weekdays (on average +9% higher). PM daily profiles followed the outdoor concentrations with the maximum levels at the end of the night and the lowest values in the early morning/mid-afternoon. The highest and lowest CO2 concentrations were registered in the early morning (< 1536 ppm) and mid-afternoon (< 627 ppm), respectively, while the CO daily profiles showed a high impact of outdoor emissions, with the minimum concentrations up to 0.81 mg m−3 (at 10 a.m. or 6 p.m.), and a maximum concentration of 1.87 mg m−3 (at 10 p.m.). Real-time comfort conditions and IAQ levels are a powerful approach to providing fast decisions to minimise human exposure and prevent negative health impacts. [ABSTRACT FROM AUTHOR]

The article presents the results of measurements of temperature, relative humidity and CO2 concentration in six single-family houses' bedrooms located in Poland, in Wrocław and vicinity, during two climatic seasons: summer–autumn and winter. Two buildings with natural ventilation (NV) were tested, three with mechanical ventilation with heat recovery (MV) and one with hybrid ventilation (HV)—mixed mode natural and mechanical. The behavior of residents regarding opening windows was analyzed and the influence of the changing internal and external conditions on their active reactions was examined. The analysis confirms and adds to the global discourse on the key impact of user behavior on securing healthy indoor air quality in housing, regardless of ventilation system or building energy standard. A disconnect exists between the observed window opening practices and typical design principles, assuming adjustment to a given ventilation system or changing weather conditions. The observations showed that in both analyzed seasons it was possible to obtain a good quality internal environment, in terms of CO2 level, regardless of the ventilation system used in the building. However, unfavorable results were observed for one bedroom, in which the inhabitants do not adapt their behavior to local technical conditions. Taking into account the level of relative humidity (RH), much higher values were observed in the NV bedrooms in both analyzed periods. The obtained results were divided into IAQ classes in accordance with the EN 16798-1. The recorded values of the internal temperature confirm the significant influence of the location of the room in the building and the actions taken by the residents. [ABSTRACT FROM AUTHOR]

Simple Summary: Indoor air quality is strongly associated with animal health and wellbeing. Therefore, animal enclosures must be consistently and sufficiently ventilated to provide for the health and well-being of animals and caretakers. Although there are several publications concerning assessments and effects of suboptimal air quality on rodents, no publications are available on group-housed non-human primates and the exposure of caretakers to inhalable dust and endotoxins. The indoor air quality of group-housed macaques at the Biomedical Primate Research Center (Rijswijk, the Netherlands) was assessed to identify possible problems regarding air circulation and the concentrations of inhalable dust, endotoxin, ammonia, fungi, temperature and relative humidity in the indoor environment. In addition, the exposure to inhalable dust and endotoxins of caretakers was evaluated. The observed values for these air quality parameters, measured at fixed locations in the animal enclosures, did not exceed the proposed human threshold limit values (TLV). However, caretakers were exposed to higher levels than the animals likely due to nature of their tasks. This study provides practical tools that can be used to improve the indoor air quality in group-housed macaques. Moreover, the results show that the exposure of caretakers to inhalable dust and endotoxins during daily work routines should be reduced. Indoor Air Quality (IAQ) is strongly associated with animal health and wellbeing. To identify possible problems of the indoor environment of macaques (Macaca spp.), we assessed the IAQ. The temperature (°C), relative humidity (%) and concentrations of inhalable dust (mg/m3), endotoxins (EU/m3), ammonia (ppm) and fungal aerosols were measured at stationary fixed locations in indoor enclosures of group-housed rhesus (Macaca mulatta) and cynomolgus macaques (Macaca fascicularis). In addition, the personal exposure of caretakers to inhalable dust and endotoxins was measured and evaluated. Furthermore, the air circulation was assessed with non-toxic smoke, and the number of times the macaques sneezed was recorded. The indoor temperature and relative humidity for both species were within comfortable ranges. The geometric mean (GM) ammonia, dust and endotoxin concentrations were 1.84 and 0.58 ppm, 0.07 and 0.07 mg/m3, and 24.8 and 6.44 EU/m3 in the rhesus and cynomolgus macaque units, respectively. The GM dust concentrations were significantly higher during the daytime than during the nighttime. Airborne fungi ranged between 425 and 1877 CFU/m3. Personal measurements on the caretakers showed GM dust and endotoxin concentrations of 4.2 mg/m3 and 439.0 EU/m3, respectively. The number of sneezes and the IAQ parameters were not correlated. The smoke test revealed a suboptimal air flow pattern. Although the dust, endotoxins and ammonia were revealed to be within accepted human threshold limit values (TLV), caretakers were exposed to dust and endotoxin levels exceeding existing occupational reference values. [ABSTRACT FROM AUTHOR]

Taiwan is located in a subtropical region with high temperatures and humidity. Office spaces are located in air-enclosed rooms in buildings, where doors and windows remain closed and only a central air-conditioning system provides temperature adjustment and ventilation. Most offices in this area have office seating areas, document storage areas on both sides of the office, and multi-function devices, which can cause sick office syndrome in the employees. This study applied environmental monitoring technology to analyze the architectural form and indoor and outdoor air quality to propose improvement strategies addressing indoor temperature, relative humidity and air quality. Quality indices were used created to evaluate the improvement efficiency. The analysis results showed that the indoor temperature and relative humidity in staff seating areas can be effectively improved. The statistical analysis results of improved efficiency for PM2.5, PM10 concentrations and total suspended particulates showed that the average indicator values have been raised from 0.05 to 1.5, 2.45 to 4.02 and 0.91 to 3.54, respectively, for staff seating area and −0.01 to 2.82, 0.15 to 3.91 and 1.25 to 7.25, respectively, for photocopier areas. The ambient air quality of this office space has been significantly improved. This study can serve as an example of air quality improvement in traditional common office spaces. [ABSTRACT FROM AUTHOR]

Since people spend most of their time in indoor environments, the objective of this work was to study indoor air quality and its effects on users’ thermal comfort. Based on previous data from a building with a central air-conditioning system and two mixed-mode buildings located in the humid subtropical climate of Florianópolis, southern Brazil, statistical analyses were performed. Each user’s subjective answer obtained through a questionnaire was combined with the corresponding environmental conditions measured by instruments. Results showed that improvement in air quality was associated with the reduction of air temperature and humidity ratio. Also, there was a significant influence of thermal and humidity sensation on air quality satisfaction. Users felt more satisfied or neutral with air quality for being in thermal comfort, and not because of the CO2 concentration—which means that air quality perception is influenced by factors other than CO2. This study recommends implementing an air exchange device in split air-conditioners with air recirculation commonly used in mixed-mode buildings in Brazil. It is important to provide suitable indoor ventilation to reduce pollutant concentration, ensure good air quality and prevent respiratory diseases. [ABSTRACT FROM AUTHOR]

Pig manure contains a wide variety of corrosion-inducing chemicals such as ammonia. Ammonia production and its release are influenced by temperature and moisture in the barn environment. Increased concentrations of ammonia can negatively affect pig health and growth, as well as pose a risk to human health. Additionally, even at decreased concentrations, ammonia reacts with humidity and causes premature corrosion of barn equipment and is a threat to the structural integrity of livestock buildings. In this study, ammonia concentrations were monitored and compared between two 880 head wean-finish swine facilities with different types of waste management systems. Both facilities had shallow manure pits, one containing a flush system and one containing a pull plug system to remove manure from the barns into the lagoon. Ammonia, dry-bulb air temperature, and relative humidity levels were measured every0 min for an entire wean-finish cycle (approximately 20 weeks). Data will be compared between the facilities to evaluate the impact of the waste management systems on indoor air quality conditions. Potential implications for pig health and growth and facility maintenance will be explored. Results will provide information on best management strategies for swine facilities. [ABSTRACT FROM AUTHOR]

Data from a nationwide survey on the status of the Swedish residential building stock and indoor air quality was placed in the public domain by the National Board of Housing, Building and Planning of Sweden. The current research investigates the indoor humidity conditions in Swedish residential buildings, single-family houses and apartments, assessing the measurements from the extensive BETSI-survey against adjusted relative humidity levels based on existing norms and Standards. The aim of this study is to investigate associations and correlations between relative humidity levels and multiple building and system characteristics, occupancy patterns and behaviors and health symptoms-complaints. The analysis uses 13 categorical and 9 continuous variables-parameters of the examined dwellings. Analysis shows that low indoor relative humidity is a realistic issue in Swedish dwellings during the heating season. The issue is more prevalent in apartments than single-family houses. In addition, low indoor relative humidity seems to be more extensive in dwellings with higher indoor temperature, smaller volume, higher ventilation rate and frequent airing practices, lower number of occupants, constructed mainly after 1985, in city suburbs and in the northern parts of the country. The developed multinomial logistic regression model may predict very accurately the relative humidity level of the Swedish dwellings, during heating season. This analysis offers additional evidence to the scientific literature for possible correlation of low relative humidity with specific health symptoms, complaints and disturbances. • Low relative humidity is a realistic issue in Swedish dwellings, mainly apartments. • The issue is more extensive in dwellings with higher indoor temperatures. • Moisture supply values are suggested for this climate and dwellings. • Possible correlation of low relative humidity with specific health symptoms. • Method may be used widely also in epidemiological and health related campaigns. [ABSTRACT FROM AUTHOR]