Search

Timed data release refers to protecting sensitive data that can be accessed only after a pre-determined amount of time has passed. While blockchain-based solutions for timed data release provide a promising approach for decentralizing the process, designing an attack-resilient timed-release service that is resilient to malicious adversaries in a blockchain network is inherently challenging. A timed-release service on a blockchain network is inevitably exposed to the risk of post-facto attacks where adversaries may launch attacks after the data is released in the blockchain network. Existing incentive-based solutions for timed data release in Ethereum blockchains guarantee protection under the assumption of a fully rational adversarial environment in which every peer acts rationally. However, these schemes fail invariably when even a single participating peer node in the protocol starts acting maliciously and deviates from the rational behavior. In this paper, we propose a systematic solution for attack-resilient and practical blockchain-based timed data release in a mixed adversarial environment, where both malicious adversaries and rational adversaries exist. We first propose an effective uncertainty-aware reputation measure to capture the behaviors of the peer involved in timed data release activities in the network. In light of such a measure, we present the design of a basic protocol that consists of two critical ingredients, namely reputation-aware peer recruitment and verifiable enforcement protocols. The former, prior to the start of the enforcement protocols, performs peer recruitment based on the reputation measure to make the design probabilistically attack-resilient to the post-facto attacks. The latter is responsible for contractually guarding the recruited peers at runtime by transparently reporting observed adversarial behaviors. However, the basic recruitment design is only aware of the reputation of the peers and it does not consider the working time schedule of the participating peers and as a result, it results in lower attack-resilience. To enhance the attack resilience further without impacting the verifiable enforcement protocols, we propose a temporal graph-based reputation-aware peer recruitment algorithm that carefully determines the peer recruitment plan to make the service more attack-resilient. In our proposed approach, we formally capture the timed data release service as a temporal graph and we develop a novel maximal attack-resilient path-finding algorithm on the temporal graph for the participating peers. We implement a prototype of the proposed approach using Smart Contracts and deploy it on the Ethereum official test network, Rinkeby. For extensively evaluating the proposed techniques, we perform simulation experiments to validate the effectiveness of the reputation-aware timed data release protocols as well as our proposed temporal-graph-based improvements. The results demonstrate the effectiveness and strong attack resilience of the proposed mechanisms and our approach incurs only a modest gas cost. [ABSTRACT FROM AUTHOR]

With the advancement in computational approaches and experimental, simulation, and modeling tools in recent decades, a trial-and-validation method is attracting more attention in the materials community. The development of powder metallurgy Ni-based superalloys is a vivid example that relies on simulation and experiments to produce desired microstructure and properties in a tightly controlled manner. In this research, we show an integrated approach to predicting the grain size of industrial forgings starting from lab-scale cylindrical compression by employing modeling and experimental validation. (a) Cylindrical compression tests to obtain accurate flow stress data and the hot working processing window; (b) double-cone tests of laboratory scale validation; (c) sub-scale forgings for further validation under production conditions; and (d) application and validation on full-scale industrial forgings. The procedure uses modeling and simulation to predict metal flow, strain, strain rate, temperature, and the resulting grain size as a function of thermo-mechanical processing conditions. The models are calibrated with experimental data until the accuracy of the modeling predictions is at an acceptable level, which is defined as the accuracy at which the results can be used to design and evaluate industrial forgings. [ABSTRACT FROM AUTHOR]

More specifically, remote sensing of watersheds encompasses a wide range of applications that involve acquiring and utilizing hydrological, ecological, and environmental information in watersheds [[15], [17]], including watershed mapping [[18]], monitoring of underlying surface elements in the watershed [[19]], inversion of water cycle parameters [[20]], water resource assessment [[21]], acquisition of watershed ecological environment parameters [[22]], monitoring natural disasters [[23]], analyzing upstream and downstream [[24]], supporting water governance priorities [[25]], water resource development [[26]], and irrigation water management [[27]]. Data Barriers and Data Sharing Addressing data barriers and promoting data sharing is a critical perspective in remote sensing for watershed management. The advent of remote sensing has revolutionized watershed research, providing unprecedented insights into watershed dynamics and spatiotemporal patterns [[10]]. Similarly, merging remote sensing data with in situ measurements, socio-economic data, and other geospatial information can enhance the accuracy and reliability of watershed analyses. [Extracted from the article]

The rapid and accurate extraction of water information from satellite imagery has been a crucial topic in remote sensing applications and has important value in water resources management, water environment monitoring, and disaster emergency management. Although the OLI-2 sensor onboard Landsat-9 is similar to the well-known OLI onboard Landsat-8, there were significant differences in the average absolute percentage change in the bands for water detection. Additionally, the performance of Landsat-9 in water body extraction is yet to be fully understood. Therefore, it is crucial to conduct comparative studies to evaluate the water extraction performance of Landsat-9 with Landsat-8. In this study, we analyze the performance of simultaneous Landsat-8 and Landsat-9 data for water body extraction based on eight common water indices (Normalized Difference Water Index (NDWI) and Modified Normalized Difference Water Index (MNDWI), Augmented Normalized Difference Water Index (ANDWI), Water Index 2015 (WI2015), tasseled cap wetness index (TCW), Automated Water Extraction Index for scenes with shadows (AWEIsh) and without shadows (AWEInsh) and Multi-Band Water Index (MBWI)) to extract water bodies in seven study sites worldwide. The Otsu algorithm is utilized to automatically determine the optimal segmentation threshold for water body extraction. The results showed that (1) Landsat-9 satellite data can be used for water body extraction effectively, with results consistent with those from Landsat-8. The eight selected water indices in this study are applicable to both Landsat-8 and Landsat-9 satellites. (2) The NDWI index shows a larger variability in accuracy compared to other indices when used on Landsat-8 and Landsat-9 imagery. Therefore, additional caution should be exercised when using the NDWI for water body analysis with both Landsat-8 and Landsat-9 satellites simultaneously. (3) For Landsat-8 and Landsat-9 imagery, ratio-based water indices tend to have more omission errors, while difference-based indices are more prone to commission errors. Overall, ratio-based indices exhibit greater variability in overall accuracy, whereas difference-based indices demonstrate lower sensitivity to variations in the study area, showing smaller overall accuracy fluctuations and higher robustness. This study can provide necessary references for the selection of water indices based on the newest Landsat-9 data. The results are crucial for guiding the combined use of Landsat-8 and Landsat-9 for global surface water mapping and understanding its long-term changes. [ABSTRACT FROM AUTHOR]

• A theoretical framework for determining the stability of negative stiffness metamaterials in a uniform field is established. • The concepts of directional stability and semi-directional stability are proposed. • Metamaterials with different physical feature distributions are designed and prepared to achieve directional stability. Negative stiffness metamaterials have been widely studied due to their unusual properties and potential applications in shape reconfiguration, shock isolation, and reusable energy absorption, but their stability in fields has been less studied. In this work, a theoretical framework for determining the stability of negative stiffness metamaterials in a uniform field is established. More importantly, the concepts of directional stability and semi-directional stability are proposed for the metamaterials that have different stability in different field directions; metamaterials with different physical feature distributions are designed and prepared to achieve such ability, and the finite element simulation is used for theory verification and parameter study. The proposed metamaterial has the potential to be applied as field direction detectors and field-sensitive electrical relays. [ABSTRACT FROM AUTHOR]

Mechanical metamaterials composed of curvilinear elements (MM-CEs) offer better programmability and functionality than their rectilinear counterparts. They thus hold promising potential for diverse applications, such as flexible electronics, impact protection, and deformation control. However, existing research on MM-CEs has primarily focused on specific curve shapes, neglecting the vast potential of the wider curve design space. Based on data-driven methods, this work builds a dataset with a hierarchical data structure, which transforms the infinite and difficult-to-conceptualize curve data into a finite number of potentially researchable curve sub-types. Moreover, methods are developed based on data mining to better understand the broad design space, excavate hidden connections of different curve sub-types and discover new rules for designing MM-CEs. The outcomes of this study offer novel strategies to investigate other structures and metamaterials with complex geometries as well. [ABSTRACT FROM AUTHOR]

• Spectral features related to Fe and OC held potentials in estimating sediment heavy metals. • XGBoost model provided good accuracy in estimating sediment heavy metals. • The integration of CWT and RFE method was recommended for heavy metal estimation. • The samples with high Fe concentration were suitable to estimate sediment heavy metals. • A model transferability index was developed to quantitatively compare the model transferability. Soil or sediment spectral reflectance do not directly reflect information of spectrally featureless heavy metals. With mangrove sediment samples collected in five regions and four habitat types, this study aimed to explore the spectral features related to spectrally active constituents (Fe and organic carbon (OC)) in estimating low and moderate concentrations of four heavy metals (Cr, Ni, Cu and Pb). A total of 27 modeling strategies using XGBoost (extreme gradient boosting) model were compared for estimating each heavy metal: three types of spectral features (Fe, OC and heavy metal) * three spectral transformation methods (Log(1/R), first derivative (FD) and continuous wavelet transform (CWT)) * three variable selection methods (genetic algorithm (GA), successive projection algorithm (SPA) and recursive feature elimination (RFE)). The results showed that the combination of CWT and RFE was recommended for heavy metal estimation, and the ranking of model accuracy was Cu > Pb > Ni > Cr. The optimal XGBoost model was found using spectral features related to Fe for Cr (R Val 2 (determination coefficient of independent validation) = 0.42, RMSE (root mean square error) = 0.32 and RPIQ (the ratio of performance to interquartile range) = 1.53) and Cu estimation (R Val 2 = 0.87, RMSE = 0.19 and RPIQ = 2.20), spectral features related to OC for Ni estimation (R Val 2 = 0.63, RMSE = 0.26 and RPIQ = 2.38) and spectral features related to Pb itself for Pb estimation (R Val 2 = 0.82, RMSE = 0.23 and RPIQ = 2.59). Moreover, the XGBoost model transferability across different habitat types outperformed that across different regions and data ranges of Fe and OC. We conclude that the modeling strategy using spectral features related to spectrally active constituents has great potentials in quantifying low and moderate concentration of sediment heavy metals, and the samples with high Fe concentration (31.62–37.29 g kg−1) are recommended to improve estimation accuracy of low and moderate concentrations of heavy metals, which could provide sampling strategy development and early warning of heavy metal pollution in mangrove ecosystem. [ABSTRACT FROM AUTHOR]

Background: Chikungunya virus (CHIKV) and Dengue virus (DENV) have similar clinical symptoms, which often induce misdiagnoses. Therefore, an antigen detection diagnostic system that can clearly identify these two viruses is desirable. Methods: In this study, we developed a novel peptide with high affinity and specificity to CHIKV, and further constructed peptide aptamer-based TRFIA assay to efficiently detect CHIKV. Peptide aptamer B2 (ITPQSSTTEAEL) and B3 (DTQGSNWI) were obtained through computer-aided design and selected as CHIKV-specific peptide aptamers based on their high binding affinity, strong hydrogen bonding, and RMSD of molecular docking. Then, a sandwich-Time-Resolved Fluoroimmunoassay (TRFIA) was successfully constructed for the detection of the interaction between peptide aptamers and viruses. Results: When using B2 as the detection element, highly specific detection of CHIKV E2 was achieved with detection limits of 8.5 ng/ml in PBS solution. Variation coefficient between inter-assay showed the disturbances received from the detection of clinical fluid specimens (including serum and urine), were also within acceptable limits. The detection limits for 10-fold dilution serum and urine were 57.8 ng/mL and 147.3 ng/mL, respectively. The fluorescent signal intensity exhibited a good linear correlation with E2 protein concentration in the range of 0-1000 ng/mL, indicating the potential for quantitative detection of E2 protein. Conclusions: These results demonstrate that the construction of peptide aptamers with high affinity and specificity provides an excellent method for rapid diagnostic element screening, and the developed peptide aptamer B2 contributed to better detection of CHIKV viral particles compared to traditional antibodies. [ABSTRACT FROM AUTHOR]

• Proximal soil sensing is still attractive in Cr estimation. • Fractional order derivative and three-band index are useful for feature extraction. • The correlation and mechanism analysis between auxiliary attributes and chromium. • Concatenation of Proximal soil sensing and auxiliary attributes is promising. • Kriging and optimal semi-variogram function are essential in soil science. The rapid and accurate determination of soil chromium (Cr) is crucial for preventing toxic element pollution in soils and ensuring ecological security. Proximal sensing technology uses visible and near-infrared (Vis-NIR) diffuse reflectance spectroscopy, which has been demonstrated to be a viable approach for monitoring soil Cr concentrations. However, at trace levels, soil Cr is not especially spectrally active, thus limiting the practical application of using corresponding spectral data for quantifying soil Cr concentrations. In this study, we hypothesized that fused proximal sensing and soil auxiliary attributes (including organic matter (OM) and pH) could improve estimation of Cr concentrations in the soil. Additionally, the introduction of best-fit variogram models was theoretically possible to improve spatial visualization. To address these hypotheses, we collected 168 soil samples from the open coal mine area in the Eastern Junggar Basin, China. Fractional-order derivative (FOD) pretreatment and optimal band combination methods were implemented for spectral data mining and the derivation of spectral parameters, respectively. Soil Cr estimation models were calibrated with a partial least squares (PLS) approach through four designed strategies with different predictors: (I) full Vis-NIR variables, (II) effective three-band spectral indices (TBIs), (III) the effective TBIs and OM, and (IV) the effective TBIs, OM, and the pH. The results suggest that FOD could identify abundant spectral variability. Compared with full Vis-NIR variables, the effective TBIs can effectively magnify the subtle spectral signals concerning soil Cr. The optimal estimation model was determined as Strategy IV, indicating that the introduction of soil auxiliary attributes (pH and OM) can improve the estimation performance of the model; notably, the coefficient of determination (R 2) and ratio of performance to interquartile distance (RPIQ) were 0.87 and 2.68, respectively. Based on the optimal semivariance model, we used kriging interpolation to map regional soil Cr. In the study area, the soil Cr distribution features strong spatial dependence and strong associations. Our study might inspire further research on soil contamination mapping based on proximal Vis-NIR sensors. [ABSTRACT FROM AUTHOR]

Background: Masquelet membrane induction technology is one of the treatment strategies for large bone defect (LBD). However, the angiogenesis ability of induced membrane decreases with time and autologous bone grafting is associated with donor site morbidity. This study investigates if the PRP-FG-nHA/PA66 scaffold can be used as a spacer instead of PMMA to improve the angiogenesis ability of induced membrane and reduce the amount of autologous bone graft. Methods: Platelet rich plasma (PRP) was prepared and PRP-FG-nHA/PA66 scaffold was synthesized and observed. The sustained release of VEGFA and porosity of the scaffold were analyzed. We established a femur LBD model in male SD rats. 55 rats were randomly divided into four groups depending on the spacer filled in the defect area. "Defect only" group (n = 10), "PMMA" group (n = 15), "PRP-nHA/PA66" group (n = 15) and "PRP-FG-nHA/PA66" group (n = 15). At 6 weeks, the spacers were removed and the defects were grafted. The induced membrane and bone were collected and stained. The bone formation was detected by micro-CT and the callus union was scored on a three point system. Results: The PRP-FG-nHA/PA66 scaffold was porosity and could maintain a high concentration of VEGFA after 30 days of preparation. The induced membrane in PRP-FG-nHA/PA66 group was thinner than PMMA, but the vessel density was higher.The weight of autogenous bone grafted in PRP-FG-nHA/PA66 group was significantly smaller than that of PMMA group. In PRP-FG-nHA/PA66 group, the bone defect was morphologically repaired. Conclusion: The study showed that PRP-FG-nHA/PA66 scaffold can significantly reduce the amount of autologous bone graft, and can achieve similar bone defect repair effect as PMMA. Our findings provide some reference and theoretical support for the treatment of large segmental bone defects in humans. [ABSTRACT FROM AUTHOR]

[Display omitted] • The growth of exotic mangrove was significantly faster than that of native species. • The morphological patterns can be used to indicate the hotspots of mangroves. • Sonneratia species was found in the forest gap and forest edge of native mangroves. • The spread of Sonneratia species is fast in bare tidal flat and tidal creek zones. • Invasive potentials of Sonneratia mangrove in Shenzhen Bay should not be ignored. Mangroves are essential forest communities in tropical and subtropical coastal zones, providing unique ecological functions and significant social and economic value. Accurate and efficient monitoring of mangroves is crucial for their protection and management. The impact of exotic species on native species is still debated, especially for mangroves, the spatiotemporal dynamics of introduced species and native mangrove species need to be closely monitored. This study aimed to investigate how exotic mangrove species affects the spatial dynamics of mangroves in Shenzhen Bay, China. Yearly Landsat images from 2000 to 2011 and Chinese high spatial resolution images during 2012–2022 were obtained and the pixel-based and multiscale object-based methods were used to obtain mangrove distribution. The results showed that: (1) Overall, mangroves in the study area increased from 281.51 ha to 526.43 ha from 2000 to 2022, with different spatiotemporal patterns in Shenzhen (+5.14%) and Hong Kong (+2.38%); (2) rapid spread of Sonneratia species was one of the main contributions to the growth of mangrove hotspots, and growth hotspots were mainly concentrated in the estuary delta; and (3) Sonneratia mangrove species was dominant in interspecific competition, not only invading the habitat of local mangroves, but also preventing the expansion of native mangrove growth. The results provide a reference for fine-scale and accurate mangrove mapping with high spatial and temporal resolutions, and highlight the need to pay more attentions to the spread and invasive potential of exotic mangrove species in the study area, as well as cooperation in adjacent reserves. [ABSTRACT FROM AUTHOR]

Aerosols are complex compounds that greatly affect the global radiation balance and climate system and even human health; in addition, aerosols are currently a large source of uncertainty in the numerical simulation process. The arid and semi-arid areas have fragile ecosystems with abundant dust but lack related high-accuracy aerosol data. To solve these problems, we use the bagging trees ensemble model, based on 1 km aerosol optical depth (AOD) data and multiple environmental covariates, to produce a monthly advanced-performance, full-coverage, and high-resolution (250 m) AOD product (named FEC AOD, fusing environmental covariates AOD) covering the arid and semi-arid areas. Then, based on the FEC AOD products, we analyzed the spatiotemporal AOD pattern and further discussed the interpretation of environmental covariates to AOD. The results show that the bagging trees ensemble model has a good performance, with its verification R2 values always remaining at 0.90 and the R2 being 0.79 for FEC AOD compared with AERONET AOD product. The high-AOD areas are located in the Taklimakan Desert and on the Loess Plateau, and the low-AOD areas are concentrated in southern Qinghai province. The higher the AOD, the stronger the interannual variability. Interestingly, the AOD reflected a dramatic decrease on the Loess Plateau and an evident increase in the south-eastern Taklimakan Desert, while the southern Qinghai province AODs showed almost no significant change between 2000 and 2019. The annual variation characteristics show that the AOD was largest in spring (0.267±0.200) and smallest in autumn (0.147±0.089); the annual AOD variation pattern showed different features, with two peaks in March and August over Gansu province but only one peak in April in other provinces/autonomous regions. Farmlands and construction lands have high AOD levels compared to other land cover types. Meteorological factors demonstrate the maximum interpretation ability of the AODs on all set temporal scales, followed by the terrain factors, while surface properties have the smallest explanatory abilities; the corresponding average contributions are 77.1 %, 59.1 %, and 50.4 %, respectively. The capability of the environmental covariates to explain the AOD varies seasonally in the following sequence: winter (86.6 %) > autumn (80.8 %) > spring (79.9 %) > summer (72.5 %). In this research, we provide a pathbreaking high spatial resolution (250 m) and long time series (2000–2019) FEC AOD dataset covering arid and semi-arid regions to support atmospheric and related studies in northwest China; the full dataset is available at 10.5281/zenodo.5727119 (Chen et al., 2021b). [ABSTRACT FROM AUTHOR]

Evaluation of the spatial distribution of urban emergency shelters can effectively identify defects in the current distribution of urban emergency shelters and weaknesses in the overall evacuation service capacity of the city and provide reference for improving the level of urban emergency shelters and evacuation and disaster relief capacity. At present, evaluation of the spatial distribution of urban emergency shelters is mainly carried out on three aspects: effectiveness, accessibility, and safety. However, there are problems, such as individual evaluation scales and incomplete indicator systems, unreasonable allocation of indicator weights, and ignoring the influence of fuzzy incompatibility between different indicator attributes on the evaluation results. In this paper, we start from two scales, the individual emergency shelter and the regional groups of emergency shelters. Based on the five criteria of effectiveness, accessibility, safety, suitability, and fairness, the evaluation indicator system of the spatial distribution of urban emergency shelters was constructed. It was combined with AHP, CRITIC, the optimal weight coefficient solution method based on the maximum deviation sum of squares theory, and fuzzy optimization theory to construct a multi-indicator evaluation model. Further, the spatial distribution condition of the existing emergency shelter in Shanghai was evaluated. The results show that: among the existing ninety-one emergency shelters in Shanghai, there are nine places with unreasonable spatial distribution; nineteen places are comparatively unreasonable. From the scale of regional groups, there is one district (Pudong New District) with unreasonable spatial distribution: its relative superiority value is far lower than other districts, and there are three districts that are comparatively unreasonable. Further, the evaluation scores of the spatial distribution reasonableness of emergency shelters in each region of Shanghai show a high–low–middle distribution from the downtown area of Shanghai outward. The evaluation indicator system and evaluation method used in this paper can effectively reflect the deficiencies in the spatial distribution of urban emergency shelters, thus providing a reference for the relevant departments to improve and plan emergency shelters. [ABSTRACT FROM AUTHOR]

[Display omitted] • For population modelling, remote sensing nighttime light data and nighttime LBS data were utilized. • Population maps of the Tibetan Plateau at the city level were modelled by geographically weighted regression. • The crowd exposure frequency characterized by nighttime LBS data contributed significantly to population modelling. • The model predicted more accurate population maps than three mainstream international population datasets. • The operational mechanism of the new demographic model was revealed. Population mapping is one of the fundamental materials for regional sustainability studies. Most scholars applied remote sensing data with excessive indicators to fit the population distribution. Nevertheless, over-complex models were lack of accuracy. This paper proposed a population model in the Qinghai-Tibet Plateau as a study area; the model has consisted of Human Activity Extent and Crowd Exposure Frequency. Performed remote sensing land cover data, nighttime light data, and LBS geographic big data as candidate indicators for exploratory regression experiments eventually developed an optimal population model assembled by nighttime LBS data and nighttime light data. The model fits significantly better at the city level (R2values of 0.9922) and reduces the error compared with other studies and publicly available datasets (%RMSE values of 6.83%). For the first time, the model proposes that Crowd Exposure Frequency based on nighttime LBS data can provide effective population simulation in the global, nighttime light data gain compensation for it. Nighttime light data plays a dominant role in densely populated areas; at the same time, nighttime LBS revised its overestimation. They modified each other to make the model accuracy significantly elevated. The modelling framework allows dynamic and low-cost population estimates of ecologically vulnerable areas and thus serves sustainable regional development. [ABSTRACT FROM AUTHOR]

[Display omitted] • Hyperspectral data were used to detect Chromium(Cr) pollution. • A data enhancement method combined with a deep learning method showed the optimal accuracy. • Our method is expected to provide large-scale accurate, real-time monitoring and guidance in soil pollution. In China, over 10% of cultivated land is polluted by heavy metals, which can affect crop growth, food safety and human health. Therefore, how to effectively and quickly detect soil heavy metal pollution has become a critical issue. This study provides a novel data preprocessing method that can extract vital information from soil hyperspectra and uses different classification algorithms to detect levels of heavy metal contamination in soil. In this experiment, 160 soil samples from the Eastern Junggar Coalfield in Xinjiang were employed for verification, including 143 noncontaminated samples and 17 contaminated soil samples. Because the concentration of chromium in the soil exists in trace amounts, combined with the fact that spectral characteristics are easily influenced by other types of impurity in the soil, the evaluation of chromium concentrations in the soil through hyperspectral analysis is not satisfactory. To avoid this phenomenon, the pretreatment method of this experiment includes a combination of second derivative and data enhancement (DA) approaches. Then, support vector machine (SVM), k-nearest neighbour (KNN) and deep neural network (DNN) algorithms are used to create the discriminant models. The accuracies of the DA-SVM, DA-KNN and DA-DNN models were 95.61%, 95.62% and 96.25%, respectively. The results of this experiment demonstrate that soil hyperspectral technology combined with deep learning can be used to instantly monitor soil chromium pollution levels on a large scale. This research can be used for the management of polluted areas and agricultural insurance applications. [ABSTRACT FROM AUTHOR]

• A spatio-temporal prediction framework was developed to map SOC. • The inter-decadal maps of China SOC were updated to the 2010s. • Effects of climatic factors for SOC variability are location- and scale- specific. • The soils in China function as carbon sinks at national scale from 1980s to 2010s. Spatiotemporal variability in soil organic carbon (SOC) plays key roles in ecosystem stability and terrestrial carbon cycling. However, the inter-decadal characteristics of SOC variability and its climate drivers in China from the 1980s to 2010s remain unclear. In this study, a modeling framework for combining spatiotemporal prediction models was proposed. Within this model, soil samples from each of the two periods were combined and calibrated to obtain three models, and their prediction outputs were selectively combined to obtain SOC maps for the different inter-decadal periods. A total of 8473 soil samples from three periods (1980s, 2000s and 2010s) were used for model validation. The results suggested that the SOC prediction accuracy in the top 0–20 cm of soil (SOC 020) was better than that of the first meter of soil (SOC 0100), and the predicted spatial patterns shared characteristics with findings from previous studies. Predictions for the 1990s exhibited relatively high uncertainty, especially in the Tibetan Plateau, Tien Shan, and Northeast China. Both individual and coupled climatic factors exerted scale- and location-specific effects on the SOC. Coupled climatic factors accounted for more than 65% of the SOC variability in both soil layers. The regional SOC in North and Northeast China exhibited inter-decadal decline. Soil in China functioned as carbon sinks from the 1980s to 2010s at a national scale, with SOC 020 increasing from 30.40 Pg to 33.97 Pg and SOC 0100 from 79.29 Pg to 82.26 Pg. Overall, our results provide reliable baseline data for optimizing carbon cycle models of terrestrial ecosystems, and to guide future carbon sequestration policies. [ABSTRACT FROM AUTHOR]

• The SOC in two depths were mapped at a resolution of 1 km and five-year interval during 1980–2100. • Three climate scenarios of SSP 1–1.9, SSP2-4.5 and SSP5-8.5 in CMIP6 were considered. • The top 20 cm and 100 cm SOC of China both acted as carbon sinks during 1980–2020. • The SOC will fluctuate significantly in the future under different climate scenarios. • Under the SSP2-4.5 scenario, SOC presented a larger likelihood of being a carbon source in most region. Revealing historical changes in soil organic carbon (SOC) and exploring its future status are important for safeguarding soil health and food security, giving full play to the service function of soil ecosystems, and coping with climate change. However, there is still a gap in our understanding of the SOC stocks in China and their spatial patterns in response to future climate change. Therefore, we attempted to fill this knowledge gap using a large amount of soil observation data, digital soil mapping technology, and global circulation models from Coupled Model Inter-comparison Project phase 6 (CMIP6). In this study, a random forest model was selected to construct the spatial relationship between SOC in the top 0–20 cm (SOC020) and 0–100 cm (SOC0100) of the soil and 21 environmental factors. Spatiotemporal changes in SOC from 1980 to 2100 were revealed at a resolution of 1 km and five-year interval for three climate scenarios in CMIP6. The cross-validation results indicated acceptable predictions for both depths of SOC; however, relatively large prediction uncertainties were observed for SOC0100 in the Tibetan Plateau and northeastern China. The mean values of SOC020 and SOC0100 over the last four decades were 35.77 and 84.62 Tg, respectively, and showed carbon sinks at the national scale, with accumulation rates of 0.05 Pg yr-1 and 0.036 Pg y-1 for the two depths. Compared with historical values (1980–2020), SOC will fluctuate significantly in the future under different climate scenarios. Among them, SOC showed a slow increasing trend at both depths under the SSP1-1.9 low emission scenario, while SOC presented a decreasing trend under the SSP2-4.5 and SSP5-8.5 medium–high emission scenarios. In particular, in most of China under the SSP2-4.5 scenario, SOC0100 presented a larger likelihood of being a carbon source. This study provides a reference for exploring the response of soil carbon pools to climate change and evaluating the effectiveness of land management and ecological protection. [ABSTRACT FROM AUTHOR]

• A framework was developed and evaluated to estimate daily FAPAR from instantaneous FAPAR. • Daily FAPAR can be estimated from MODIS instantaneous FAPARs. • MODIS instantaneous FAPAR underestimates daily value. • Daily FAPAR is potential to improve GPP estimation. The daily Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) is crucial for vegetation dynamics monitoring and terrestrial carbon modeling. However, current FAPAR products only provide instantaneous values at the satellite transit times and a large data gap exists between instantaneous and daily FAPAR. To fill this gap, this study aimed to estimate daily FAPAR from instantaneous values retrieved from Moderate-resolution Imaging Spectroradiometer (MODIS) data. A framework combining method to estimate instantaneous FAPAR (instantaneous FAPAR method) and method to calculate daily FAPAR (instantaneous-to-daily FAPAR method) was proposed. Instantaneous FAPAR method for estimating intra-daily FAPAR from reduced observations was evaluated. Three instantaneous-to-daily FAPAR methods (ratio, simple average and solar zenith angle weighted average methods) were compared to estimate the daily FAPAR from continuous instantaneous values. The daily FAPAR was finally estimated from MODIS instantaneous values. The estimation and validation were performed at seven forest sites distributed in North America and Western Europe. The results show that the instantaneous FAPAR method can accurately simulate the intra-daily instantaneous FAPAR (RMSE ∼ 0.01, bias ∼ 0). The three instantaneous-to-daily FAPAR estimation methods showed similar performances (R2 ∼1, RMSE ∼ 0.01, and bias ∼ 0). The in situ instantaneous FAPAR values at the MODIS acquisition times underestimated the daily value during the non-peak growing season (FAPAR < 0.9) and the underestimation is also affected by the diffuse PAR radiation. MODIS instantaneous FAPAR underestimates in situ daily FAPAR over the year. The daily FAPAR estimates from in situ instantaneous values at MODIS acquisition times or the MODIS instantaneous FAPAR data reduce the gap between instantaneous and daily values. Validated by in situ data, the MODIS instantaneous FAPAR products should be further optimized to improve the accuracy of daily FAPAR estimation. This study lays the foundation for estimating the daily FAPAR from instantaneous values to improve GPP estimation. [ABSTRACT FROM AUTHOR]

• GMM can distinguish similar spectral features in vegetation. • After spectral feature partition, the difference modeling is superior to whole-sample modeling. • UAV hyperspectral can indirectly reveal salinization patterns by inversion of saline vegetation SPAD. The chlorophyll content of saline vegetation can indirectly reflect salinization. Rapid and non-destructive capture of chlorophyll content of saline vegetation at a regional scale is essential for saline soil improvement and sustainability of saline agriculture. However, traditional soil–plant analyzer development (SPAD) monitoring based on SPAD-502 is carried out at the leaf scale, which does not allow rapid access to SPAD information for the whole region. In this study, we proposed that post-hyperspectral classification based on spectral differences that could contribute to enhanced estimation of SPAD in saline vegetation. To test this proposal, we partitioned the hyperspectral images using a Gaussian mixture model. Then, estimation models based on spectral partition and full-sample SPAD were developed using in situ observation data and a random forest model, respectively. Finally, the unmanned aerial vehicles (UAV) hyperspectral images were used as the input data source to digitally map the SPAD of saline vegetation in the region, using the prediction model. The results indicated that there were significant intensity and shape differences in the spectral reflectance characteristics of saline vegetation under different clusters. The SPAD prediction model, based on spectral feature partition, performed significantly better than the full sample. The SPAD maps of saline vegetation before and after clustering displayed similar spatial distribution models, but the prediction uncertainty of the models, based on spectral feature partition, was relatively low. Our results confirm the effectiveness and stability of UAV hyperspectral and spectral partition-based modeling in developing SPAD spatial distribution estimation models for saline vegetation. [ABSTRACT FROM AUTHOR]

[Display omitted] • We updated information on soil salinity: soil salinization exacerbated overall. • Spectral information and environmental covariates were necessary but still needed to filter. • The model with environmental covariates improved on performance for soil salinity. • The GBRT model performance was the best among machine learning models. Soil salinization is the main source of global soil degradation. It has impeded progress towards sustainable development goals (SDGs) by threatening 20% of irrigated areas. However, in many data-poor regions, accurate soil salinization information is unavailable. Thus, an updated soil salinity map with high accuracy and resolution is urgently needed to help local governments conduct precise management. In this study, a bootstrap hybrid machine learning framework was developed combine Sentinel-2 data and environmental covariates. The Boruta algorithm was applied to input the spectral information and environmental variables to identify the primary factors influencing soil salinity. By averaging 100 model iterations within a bootstrap framework, the soil salinity mapping outcomes were compared from four machine learning methods (bagging, classification and regression tree, random forest, and gradient boosting regression tree (GBRT)). The results showed that the models driven by spectral information and environmental covariates (strategy II) explained 68∼88% of the variability in soil salinity. The model accuracy of strategy II was improved by 5%-8% over that of the models driven only by spectral information (strategy I). The GBRT yielded the most appropriate averaging performance of the four machine learning approaches within strategy II, with an R2 of 0.88, a root mean square error (RMSE) of 6.33 dS m−1, a ratio of performance to interquartile distance (RPIQ) of 4.66 and model stability (ROB) of 0.44. The bootstrap averaging method was relatively stable and had high accuracy potential. The distribution of soil salinity in the Ebinur Lake region was the result of a combination of natural and human activity influences. The proposed approach provides a soil salinity mapping strategy with a fine resolution (10 m) and high accuracy in data-poor places. It may also aid in the restoration of biodiversity, the decrease in land degradation, and the avoidance of future food output reductions in the future. [ABSTRACT FROM AUTHOR]

[Display omitted] • Single and composite heavy metal pollution indices of mangrove sediment were explored. • Four types of spectral transformation methods were compared. • XGBoost and physicochemical properties were integrated to estimate pollution indices. • Composite pollution index was more accurately estimated than the other indices. • Fe and organic carbon significantly affected estimation accuracy of pollution indices. Single and composite pollution indices (SPI and CPI) of heavy metals are calculated with background heavy metal concentrations. They are efficient evaluation indicators of sediment pollution levels and could be directly compared among different regions and habitat types, however, they are rarely investigated in mangrove sediment with visible and near-infrared spectroscopy (VNIRS). With mangrove sediment samples collected from five regions and four habitat types, this study aimed to develop estimation models of heavy metal (Cr, Ni, Cu, Zn and Pb) pollution indices using XGBoost (extreme gradient boosting) method, and further to explore the effect of physicochemical properties (Fe, organic carbon (OC), clay and salinity) on the estimation accuracy. Kruskal-Walls test showed that regions and habitat types were significant factors affecting the six pollution indices. Compared with first derivative, second derivative and continuum removal reflectance, standard normal variate (SNV) reflectance was more accurate for estimating SPIs and CPI using XGBoost model. The XGBoost models with sensitive wavelengths of SNV reflectance outperformed that with whole spectrum (410 bands) in estimating the six pollution indices, and the ranking of estimation accuracy was CPI > SPI Cu > SPI Zn > SPI Pb > SPI Ni > SPI Cr. Compared with the XGBoost model with sensitive wavelengths alone, the model with additional physicochemical properties could increase R 2 and RPD (the ratio of standard deviation to RMSE of validation in the test subset) values by 0.795–7.282% and 1.199–8.780%, and decrease RMSE values by 4.101–26.866% in estimating SPI Cr , SPI Ni and SPI Cu. Moreover, Fe and OC had greater effect on the estimation accuracy than clay and salinity. We conclude the integration of XGBoost and physicochemical properties holds potentials for accurately assessing heavy metal pollution indices in mangrove sediment with VNIRS, which can provide methodological basis for evaluating environment quality and ecological risk in mangrove ecosystem at the plot or landscape scale. [ABSTRACT FROM AUTHOR]

Since hyperspectral satellite images (HSIs) usually hold low spatial resolution, improving the spatial resolution of hyperspectral imaging (HSI) is an effective solution to explore its potential for remote sensing applications, such as land cover mapping over urban and coastal areas. The fusion of HSIs with high spatial resolution multispectral images (MSIs) and panchromatic (PAN) images could be a solution. To address the challenging work of fusing HSIs, MSIs and PAN images, a novel easy-to-implement stepwise fusion approach was proposed in this study. The fusion of HSIs and MSIs was decomposed into a set of simple image fusion tasks through spectral grouping strategy. HSI, MSI and PAN images were fused step by step using existing image fusion algorithms. According to different fusion order, two strategies ((HSI+MSI)+PAN and HSI+(MSI+PAN)) were proposed. Using simulated and real Gaofen-5 (GF-5) HSI, MSI and PAN images from the Gaofen-1 (GF-1) PMS sensor as experimental data, we compared the proposed stepwise fusion strategies with the traditional fusion strategy (HSI+PAN), and compared the performances of six fusion algorithms under three fusion strategies. We comprehensively evaluated the fused results through three aspects: spectral fidelity, spatial fidelity and computation efficiency evaluation. The results showed that (1) the spectral fidelity of the fused images obtained by stepwise fusion strategies was better than that of the traditional strategy; (2) the proposed stepwise strategies performed better or comparable spatial fidelity than traditional strategy; (3) the stepwise strategy did not significantly increase the time complexity compared to the traditional strategy; and (4) we also provide suggestions for selecting image fusion algorithms using the proposed strategy. The study provided us with a reference for the selection of fusion strategies and algorithms in different application scenarios, and also provided an easy-to-implement solution and useful references for fusing HSI, MSI and PAN images. [ABSTRACT FROM AUTHOR]

Controlling and managing surface source pollution depends on the rapid monitoring of total nitrogen in water. However, the complex factors affecting water quality (plant shading and suspended matter in water) make direct estimation extremely challenging. Considering the spectral response mechanisms of emergent plants, we coupled discrete wavelet transform (DWT) and fractional order discretization (FOD) techniques with three machine learning models (random forest (RF), bagging algorithm (bagging), and eXtreme Gradient Boosting (XGBoost)) to mine this potential spectral information. A total of 567 models were developed, and airborne hyperspectral data processed with various DWT scales and FOD techniques were compared. The effective information in the hyperspectral reflectance data were better emphasized after DWT processing. After DWT processing the original spectrum (OR), its sensitivity to TN in water was maximally improved by 0.22, and the correlation between FOD and TN in water was optimally increased by 0.57. The transformed spectral information enhanced the TN model accuracy, especially for FOD after DWT. For RF, 82% of the model R2 values improved by 0.02~0.72 compared to the model using FOD spectra; 78.8% of the bagging values improved by 0.01~0.53 and 65.0% of the XGBoost values improved by 0.01~0.64. The XGBoost model with DWT coupled with grey relation analysis (GRA) yielded the best estimation accuracy, with the highest precision of R2 = 0.91 for L6. In conclusion, appropriately scaled DWT analysis can substantially improve the accuracy of extracting TN from UAV hyperspectral images. These outcomes may facilitate the further development of accurate water quality monitoring in sophisticated global waters from drone or satellite hyperspectral data. [ABSTRACT FROM AUTHOR]

Aquaculture has grown rapidly in the field of food industry in recent years; however, it brought many environmental problems, such as water pollution and reclamations of lakes and coastal wetland areas. Thus, the evaluation and management of aquaculture industry are needed, in which accurate aquaculture mapping is an essential prerequisite. Due to the difference between inland and marine aquaculture areas and the difficulty in processing large amounts of remote sensing images, the accurate mapping of different aquaculture types is still challenging. In this study, a novel approach based on multi-source spectral and texture features was proposed to map simultaneously inland and marine aquaculture areas. Time series optical Sentinel-2 images were first employed to derive spectral indices for obtaining texture features. The backscattering and texture features derived from the synthetic aperture radar (SAR) images of Sentinel-1A were then used to distinguish aquaculture areas from other geographical entities. Finally, a supervised Random Forest classifier was applied for large scale aquaculture area mapping. To address the low efficiency in processing large amounts of remote sensing images, the proposed approach was implemented on the Google Earth Engine (GEE) platform. A case study in the Pearl River Basin (Guangdong Province) of China showed that the proposed approach obtained aquaculture map with an overall accuracy of 89.5%, and the implementation of proposed approach on GEE platform greatly improved the efficiency for large scale aquaculture area mapping. The derived aquaculture map may support decision-making services for the sustainable development of aquaculture areas and ecological protection in the study area, and the proposed approach holds great potential for mapping aquacultures on both national and global scales. [ABSTRACT FROM AUTHOR]

• BEMD was applied to high-resolution SOM map in northwestern China. • Scale- and region-specific variations in SOM were unraveled. • The variance of SOM was partitioned by climate, topography and land surface. • Main factors that influencing SOM were different in different scales. Soil organic matter (SOM) significantly affects soil quality, food security, and the global carbon cycle. Variations in the SOM content are controlled by many environmental factors and differ depending on the scale and region. The Mountain–Oasis–Desert System (MODS) in arid areas is limited by climate conditions and water and soil resources. Therefore, the effects of environmental factors on the SOM content may differ. This study aimed to characterize spatial patterns of the SOM content in a MODS in northwestern China and reveal the SOM variations at different scales and regions. First, we employed the random forest model to predict the SOM content and the uncertainty at the nodes of a 90 m grid. We then extracted scale- and region-dependent variations in the SOM content using bivariate empirical mode decomposition (BEMD). Data analysis, geostatistics, and a two-dimensional fast Fourier transform were applied to analyze the SOM pattern and its correlations with environmental covariates at different scales. The results suggest that the variations in the SOM content were mainly concentrated at the large scale. The correlations between environmental factors and the SOM were scale- and region-specific, indicating complex interrelationships among topography, land use, salinization, soil erosion, and fertilization. At the intermediate-large spatial scale, topography characteristics and surface features were the major factors controlling the SOM content, whereas the climate had a larger effect on SOM than other factors at the large scale. Based on our results, BEMD has great potential to reveal SOM variations in the scale–region domain. BEMD can be used in environmental modeling in the future to gain insights into the variations in soil properties depending on environmental factors and anthropogenic activities. [ABSTRACT FROM AUTHOR]

• Successful application of the ESTARFM to study the dynamics of playas surface. • NDVI and SI are sensitive to precipitation events. • Precipitation events affect the spatiotemporal distribution of surface salinity. • Salinity spectral indices decrease after precipitation events. Playas are desert landscapes unique to arid regions that respond quickly to climate change. Changes in surface salinity in Praia are directly linked to water security and regional ecological and economic health. This study aimed to explore the sensitivity of remotely sensed spectral indices to precipitation events. An ESTARFM was utilized to fuse daily (less than 10% cloudiness) MODIS and Landsat 8 imagery from April to September 2019 in the Ebinur Lake Wetland Reserve. Salinity was tested in the laboratory after soil collections in May (spring) and August (summer). The significantly correlated normalized difference vegetation and salinity indices were compared to the precipitation data and found to fluctuate in response to precipitation. The normalized difference vegetation and salinity indices decreased following precipitation events and increased during precipitation intervals, and the precipitation amount and evaporation intensities may have influenced the magnitudes of the decrease and increase. Following precipitation, the playa surface produces new puddles and a new spatial distribution pattern of soil salinity. This study determined that the spatiotemporal fusion technique is an effective method for observing the dynamics of playa surfaces, and precipitation and evaporation affect the spatial distribution of salt on the playa surface; however, the monitoring period should be short when utilizing remote sensing to monitor playa salinity. [ABSTRACT FROM AUTHOR]

The existing research on watershed ecological compensation pays less attention to the special basin (without significant relationship between upstream and downstream or the compensation subject and object are distributed on the left and right banks of the basin), which makes the previous research methods difficult to be effectively used. Therefore, it is necessary to explore a new method to solve the problem of ecological compensation in special basin. Taking Taihu Lake Basin (Jiangsu section) as an example, this paper first calculates the ecosystem service value (ESV) of the region from 2005 to 2018, and makes a spatial-temporal analysis; through the construction of land use intensity index system and coupling coordination degree model, the relationship between ESV and land use intensity is explored, and the reasons for its change are explored; finally, this paper constructs a compensation standard accounting model based on GDP, basin area and population, and applies it to the accounting of compensation standard and the identification of compensation subject and object. The results show that: from 2005 to 2018, the land use of this area changed greatly, mainly reflected in farmland and urban land; ESV decreased by 21.41%, which was mainly affected by the change of land use, the downturn of grain market, and farmers' going out to work; the coupling coordination degree of land use intensity and ESV in this area entered the stage of coordinated development from 2010, but the situation of each city was quite different; population, area and GDP have a great influence on compensation subject and object, and compensation standard. This study can not only provide a complete methodology for governments to implement ecological compensation in special basins, and improve the existing ecological compensation theory. [ABSTRACT FROM AUTHOR]

• Maternal exposure to temperature extremes and variability can increase the risk of GDM. • The susceptible time window for the effect of non-optimal temperature on GDM appeared in the second trimester. • No interaction between ambient temperature and air pollution on GDM were observed. Previous observational studies have shown that exposure to ambient temperature and air pollution were associated with the incidence of gestational diabetes mellitus (GDM). However, the susceptible time window of non-optimal temperature on GDM is still unknown, and the interaction with air pollution has not been examined. We conducted a prospective cohort study in Guangzhou, China to investigate the windows of susceptibility of temperature extremes and variability on the risk of GDM and to explore any interaction effect with air pollution. Daily maximum (T max), minimum temperature (T min) and diurnal temperature range (DTR) were obtained from Guangdong Meteorological Service. Distributed lag non-linear models with a logistic regression were applied to assess the effect of temperature extremes and DTR in different weeks of gestation on GDM. To examine the interaction effect, relative excess risk due to interaction index, attributable proportion and synergy index were calculated. There were 5,165 pregnant women enrolled, of which 604 were diagnosed with GDM (11.7%). Compared with a reference temperature (50th percentile of T max), we found that extreme high temperature (99th percentile of T max) exposure during 21st and 22nd gestational weeks was associated with an increased risk of GDM. Extreme low temperature (1st percentile of T max) exposure during 14th to 17th weeks increased the risk of GDM. We observed that per 1 °C increment of DTR during 21st to 24th weeks was associated with an elevated GDM risk. No interaction effect of temperature extremes or variability with air pollution on GDM were observed. Our results suggested that non-optimal temperature is an independent risk factor of GDM. The time window of susceptibility for extreme temperatures and DTR exposure on the risk of GDM generally occurred in second trimester of pregnancy. In the context of climate change, our study has important implications for reproductive health and justifies more research in different climate zones. [ABSTRACT FROM AUTHOR]