Search

A lignin-based PU coating was prepared for paper-based green packaging. Two representative diisocyanate were used to prepare the coatings. Due to the rigid aromatic, the physical properties of the TDI system reached the maximum below the lignin content of 40%. The HDI that contains flexible aliphatic chains alleviated the brittleness of coating, and it showed physical advantages when the lignin content was more than 50%. Owing to the high lignin content, the coating presented enhanced thermal stability. After coated with the lignin-based PU coatings, the dry tensile strength of coated paper was improved by 126%. Amazingly, the wet strength was increased from 0.31 to 12.6 MPa with an improvement nearly 40 times. Based on the coordination of lignin, Ag+ was introduced into the PU matrix, which imparted the coating with excellent antibacterial ability. The colony forming units of E. coli and S. aureus were both less than 1. However, no inhibition halo was observed, which indicated that the Ag was firmly anchored on the coating and the antibacterial ability is only available when the bacterial contact the coating surface. The lignin-based PU coating with favorable sustainability and properties shows great potential in paper-based green packaging fields. The prepared PU coating with high lignin content and firmly anchored Ag+ exhibits outstanding physical properties, thermal stability, and antibacterial property, which makes it an ideal candidate to be used in paper-based green packaging. [Display omitted] [ABSTRACT FROM AUTHOR]

Nowadays, the dependence on synthetic plastic-based materials for the preservation and transport of different types of products is very high, leading to major environmental and human health concerns, which highlights the importance of investigating sustainable options. Paper is a widely used bio-based material for packaging however, the development of newer and straightforward approaches to produce paper-based materials with increased functionalities and performance is still highly desired. In this work, we report the use of a bio-based photopolymerizable coating formulation, composed of tung oil, and using Darocur 1173 as photoinitiator, to develop functional papers with hydrophobic and improved water barrier properties, without compromising other properties. Coated paper samples were prepared, using different irradiation times (0, 15, 30, 60, and 300 s), to study the effect of this parameter on the properties of the coated papers. The ensuing coated papers presented pick-up values between 6 and 7 g/m2. Their hydrophobicity was significantly improved as evidenced by the increase in the contact angle values from about 71° to 127° and the significant decrease in the water absorption, measured by the Cobb test, from 108 down to 17 g/m2, upon a curing time of only 15 s. Furthermore, with this time of curing, the optical (viz. whiteness, brightness, and opacity) and mechanical properties (viz. tensile and burst strength) of paper were not affected. These results highlight the great potential of tung oil photopolymerizable coating formulations as a simple and promising alternative for the fabrication of more sustainable and functional paper packaging materials. [Display omitted] • Photopolymerizable bio-based coating for paper-based packaging materials • The obtained coatings confer high hydrophobicity to paper. • Papers with improved air barrier and mechanical properties were obtained. • Optimized curing time (15 s) compatible with manufacturing constraints [ABSTRACT FROM AUTHOR]