Search

CuO/CeO2 catalysts were widely studied as an alternative to precious metal catalysts, and the Cu–Ce synergy was essential to improve the catalytic performance. In this paper, the effects of CuO loading on Cu–Ce synergy in CuO/CeO2 nanorod catalysts and their performance in toluene combustion were systematically investigated. It was found that non-equilibrium plasma facilitated the dispersion of CuO active species on the CeO2 surface. With the increase of the CuO loading from 1 wt% to 4 wt%, the Cu–Ce synergistic effect was gradually improved, which generated Cu+/Cu2+ and Ce3+/Ce4+ redox electron pairs. The highest oxygen vacancy concentration and Cu+ content of CuCe-4 (4 wt%) resulting from strong Cu–Ce synergy accelerated the activation of chemisorbed oxygen and consequently improved the efficiency of toluene catalytic combustion. [ABSTRACT FROM AUTHOR]

Plasma catalysis is recognized as a promising technology for the elimination of diluted volatile organic compounds (VOCs). In this study, a hybrid process was carried out using dielectric barrier discharge (DBD) and MCeZr/TiO2 (M = Cu, Mn, Ni, and Co) catalysts for the degradation of VOCs. The plasma-catalytic system demonstrated a substantial improvement in toluene conversion and CO2 selectivity compared to the plasma-only system owing to the synergistic effects of plasma and thermal catalysis on toluene degradation. The performance of toluene removal follows the sequence of CuCeZr/T > NiCeZr/T > CoCeZr/T > MnCeZr/T in plasma catalysis. The CuCeZr/T catalyst demonstrated the highest toluene conversion of 99.0% and a CO2 selectivity of 91.0% at a discharge power of 30 W. Energetic electrons and reactive species generated by plasma actively participate in toluene activation in the gas phase and facilitate adsorption on the catalyst surface. The redox properties between Ce4+/Ce3+ and Cu+/Cu2+ species dictated the reducibility of the CuCeZr/T catalyst, promoting oxygen cycling during toluene oxidation and leading to enhanced catalytic performance. The pathways of toluene destruction in the plasma-catalysis system are discussed based on the analysis results of GC–MS, optical emission spectroscopy and calculations of the electron-impact reactions. [ABSTRACT FROM AUTHOR]

The CuMn/ZSM-5 (CM/Z), CuMn/Beta (CM/B), and CuMn/SSZ-13 (CM/S) catalyst samples were prepared via an excess impregnation method to investigate the metal-support effect. The results show that the activity at 550 °C for NO direct decomposition follows the order of CM/Z (53.4%) > CM/B (49.2%) > CM/S (7.9%). The good activity and stability of CM/Z are attributed to a strong support effect including forming more active copper sites of the (Cu2+-O2--Cu2+)2+ and (Cu+-□-Cu+)2+ dimers, which have higher redox activity, capacity of oxygen mobility, and NO sorption capability. The competitive adsorption between NO and O 2 on the oxygen vacancy of dimers over CM/Z results in the activity decrease from 53.4% to 40.3% at 550 °C after adding 1 vol% O 2. The reaction mechanism over CM/Z was discussed based on the in situ DRIFT and isotopic (18O 2) experiments. Two NO adsorbs firstly on (Cu+-□-Cu+)2+ to form N 2 O, and N 2 O is activated to produce N 2 , followed by the NO adsorption on (Cu2+-O2--Cu2+)2+ to form nitrite and nitrate species and decomposition to NO and O 2. [Display omitted] ● The support effect of ZSM-5, Beta, and SSZ-13 supported CuMn is examined. ● CuMn/ZSM-5 exhibits a high NO to N 2 conversion of 53.4% at 550 °C. ● The intermediate species and competitive adsorption of NO and O 2 are discussed. ● The reaction pathways for NO direct decomposition are proposed. [ABSTRACT FROM AUTHOR]

• Ea of intermediate species is calculated during toluene oxidation. • Relationship between the activation energy of the overall and primitive reaction. • Transient response experiments of isotopically labeled oxygen. • M−K mechanism dominates in the oxidation of toluene. Catalytic properties of multiple metals deposited on TiO 2 nanoparticles were investigated in the oxidation of toluene. Isovolume impregnation method prepared the catalysts containing Cu, Mn, Ni, Co, and Fe deposited on TiO 2 , including CeO 2 and ZrO 2. The effects of loaded metal oxides on the structure and activity of initial catalysts were investigated using various characterization techniques. Toluene's removal efficiency and CO 2 selectivity in the catalyst system were classified as follows: CuCeZr/T > MnCeZr/T > NiCeZr/T > CoCeZr/T > FeCeZr/T. Presence of water vapor exhibits an inhibitory effect on the conversion of toluene, which diminishes at higher temperatures. One contribution of this paper is to obtain the oxidation pathway of toluene and the relationship between the activation energy of all-inclusive and elementary reactions based on the variation of infrared spectrum using Freeman-Carroll method. Another contribution is to clarify the share of Langmuir-Hinshelwood and Mars-van Krevelen mechanisms during the oxidation of toluene over CuCeZr/T catalyst by transient response experiments of isotopically labeled oxygen. These findings provide a feasible method for the design and synthesis of transition metal oxide catalysts for industrial applications. [ABSTRACT FROM AUTHOR]