Search

The rapid spread of SARS-CoV-2 caused the COVID-19 pandemic and accelerated vaccine development to prevent the spread of the virus and control the disease. Given the sustained high infectivity and evolution of SARS-CoV-2, there is an ongoing interest in developing COVID-19 serology tests to monitor population-level immunity. To address this critical need, we designed a paper-based multiplexed vertical flow assay (xVFA) using five structural proteins of SARS-CoV-2, detecting IgG and IgM antibodies to monitor changes in COVID-19 immunity levels. Our platform not only tracked longitudinal immunity levels but also categorized COVID-19 immunity into three groups: protected, unprotected, and infected, based on the levels of IgG and IgM antibodies. We operated two xVFAs in parallel to detect IgG and IgM antibodies using a total of 40 μL of human serum sample in

The highly contagious nature and 100% fatality rate contribute to the ongoing and expanding impact of the African swine fever virus (ASFV), causing significant economic losses worldwide. Herein, we developed a cascaded colorimetric detection using the combination of a CRISPR/Cas14a system, G-quadruplex DNAzyme, and microfluidic paper-based analytical device. This CRISPR/Cas14a-G4 biosensor could detect ASFV as low as 5 copies/μL and differentiate the wild-type and mutated ASFV DNA with 2-nt difference. Moreover, this approach was employed to detect ASFV in porcine plasma. A broad linear detection range was observed, and the limit of detection in spiked porcine plasma was calculated to be as low as 42-85 copies/μL. Our results indicate that the developed paper platform exhibits the advantages of high sensitivity, excellent specificity, and low cost, making it promising for clinical applications in the field of DNA disease detection and suitable for popularization in low-resourced areas.

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The potential of paper and paperboard as fiber-based materials capable of replacing conventional polymer-based materials has been widely investigated and evaluated. Due to paper's limited extensibility and inherent heterogeneity, local structural variations lead to unpredictable local mechanical behavior and instability during processing, such as mechanical forming. To gain a deeper understanding of the impact of mechanical behavior and heterogeneity on the paper forming process, the Finite Element Method (FEM) coupled with continuum modeling is being explored as a potential approach to enhance comprehension. To achieve this goal, utilizing experimentally derived material parameters alongside stochastic finite element methods allows for more precise modeling of material behavior, considering the local material properties. This work first introduces the approach of modeling heterogeneity or local material structure within continuum models, such as the Stochastic Finite Element Method (SFEM). A fundamental challenge lies in accurately measuring these local material properties. Experimental investigations are being conducted to numerically simulate mechanical behavior. An overview is provided of experimental methods for material characterization, as found in literature, with a specific focus on measuring local mechanical material structure. By doing so, it enables the characterization of the global material structure and mechanical behavior of paper and paperboard. [ABSTRACT FROM AUTHOR]

This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK). Multi-ply papers were obtained from layers of appropriate grammage formed separately and bonded in a wet state. Paper layers were formed from primary pulps (UBSK and BHK) or their mixtures (threeply UBSK-BHK paper and three-ply UBSK-BHK-UBSK paper), from which various variants of laboratory paper samples were made. This work focused on three-layer papers. The obtained laboratory sheets were analysed for changes in tear resistance, tensile strength, bursting strength, short span compression strength (SCT), and corrugating medium test (CMT). In most cases, three-layer structures were characterised by higher strength parameters than single-layer papers. The tear strength and SCT of papers consisting of three layers formed from both mixed pulps were slightly lower than those of solid papers. The results demonstrate the feasibility of producing three-ply paper with significantly reduced variability in parameters such as elongation and bursting strength, which are inherently subject to high variability. [ABSTRACT FROM AUTHOR]

The primary aim of this research was to explore the feasibility of producing environmentally friendly composite materials by employing diverse hybrid matrices consisting of dammar natural resin, supplemented with small proportions of two synthetic resins: one epoxy and the other acrylic. A blend of paper and chicken feathers served as the reinforcing elements. The fabrication of these composite materials utilized a hand layup technique. Targeted for applications in the furniture industry or interior design, their mechanical properties were assessed through various tests. Specimens were obtained from the manufactured samples and subjected to evaluations for tensile strength, compression, flexure, vibrations, Shore hardness, and water absorption. Results indicated that irrespective of the testing method employed, the mechanical strength properties exhibited a decline with an increase in the percentage of dammar in the hybrid resins, whereas the elasticity properties demonstrated an increase with this percentage. [ABSTRACT FROM AUTHOR]

Thin coating layers of cross-linked polydimethylsiloxane (PDMS) and inorganic particles including glass spheres (GS), colloidal and fumed silica (aero and N20), montmorillonite (MMT), and kaolin (K) were attached onto Grade 1 Whatman filter paper (WFP) substrates using the spraycoating procedure to achieve superhydrophobic hybrid paper sheets. Coating formulations were varied in terms of their PDMS molecular masses and inorganic particles to prepare different samples. The effect of PDMS molecular weight and change in inorganic particle composition on the optical properties, surface roughness, barrier properties, surface chemistry, and topography was investigated. Hybrid paper sheets with ΔE00 values lower than 1 could be achieved, the surface roughness of which could be decreased by increasing the PDMS molecular weight in the coating formulation. Scanning electron microscopy studies revealed a homogeneous coating distribution, resulting in significant improvements in both the air and water barrier properties of the hybrid paper sheets. Spectroscopic investigations revealed the presence of interactions between the coating layer and the underlying paper substrate. Moreover, the distribution behavior of the inorganic particles on the spraycoated surfaces using the proposed method was also investigated using model compounds. [ABSTRACT FROM AUTHOR]

The development of pesticides has significantly advanced global agricultural production, but the ensuing problem of pesticide residues poses a severe threat to human health. So, there is an urgent need to establish a rapid, accurate, sensitive, cost-effective and on-site method for large-scale detection of pesticide residues. Electrochemical paper-based analytical devices (ePADs) represents a highly sensitive and portable microanalysis system, which uses paper as a substrate and relies on a capillary force to drive the fluid for the separation and detection of samples. The diversity of pesticides and agricultural products and the complexity of matrices impose high requirements on the sample preparation procedure. This article summarizes the preparation process of ePADs from the aspects of paper selection, the establishment of hydrophilic and hydrophobic channels, the integration of separation zones, and electrode printing. Subsequently, this paper establishes the relationship between pesticide detection and chip preparation based on the mechanism of electrochemical detection of pesticides. Finally, it discusses the advantages, challenges and future prospects of ePADs with a view to providing theoretical reference for enhanced application of ePADs in the field of pesticide residue detection.

This research investigated the influence of the layered structure of paper on its selected strength properties. Two types of cellulose pulp were used: unbleached kraft pine pulp (UBSK) and unrefined bleached birch kraft pulp (BHK). Multi-ply papers were obtained from layers of appropriate grammage formed separately and bonded in a wet state. Paper layers were formed from primary pulps (UBSK and BHK) or their mixtures (three-ply UBSK-BHK paper and three-ply UBSK-BHK-UBSK paper), from which various variants of laboratory paper samples were made. This work focused on three-layer papers. The obtained laboratory sheets were analysed for changes in tear resistance, tensile strength, bursting strength, short span compression strength (SCT), and corrugating medium test (CMT). In most cases, three-layer structures were characterised by higher strength parameters than single-layer papers. The tear strength and SCT of papers consisting of three layers formed from both mixed pulps were slightly lower than those of solid papers. The results demonstrate the feasibility of producing three-ply paper with significantly reduced variability in parameters such as elongation and bursting strength, which are inherently subject to high variability.

The potential of paper and paperboard as fiber-based materials capable of replacing conventional polymer-based materials has been widely investigated and evaluated. Due to paper’s limited extensibility and inherent heterogeneity, local structural variations lead to unpredictable local mechanical behavior and instability during processing, such as mechanical forming. To gain a deeper understanding of the impact of mechanical behavior and heterogeneity on the paper forming process, the Finite Element Method (FEM) coupled with continuum modeling is being explored as a potential approach to enhance comprehension. To achieve this goal, utilizing experimentally derived material parameters alongside stochastic finite element methods allows for more precise modeling of material behavior, considering the local material properties. This work first introduces the approach of modeling heterogeneity or local material structure within continuum models, such as the Stochastic Finite Element Method (SFEM). A fundamental challenge lies in accurately measuring these local material properties. Experimental investigations are being conducted to numerically simulate mechanical behavior. An overview is provided of experimental methods for material characterization, as found in literature, with a specific focus on measuring local mechanical material structure. By doing so, it enables the characterization of the global material structure and mechanical behavior of paper and paperboard.

The primary aim of this research was to explore the feasibility of producing environmentally friendly composite materials by employing diverse hybrid matrices consisting of dammar natural resin, supplemented with small proportions of two synthetic resins: one epoxy and the other acrylic. A blend of paper and chicken feathers served as the reinforcing elements. The fabrication of these composite materials utilized a hand layup technique. Targeted for applications in the furniture industry or interior design, their mechanical properties were assessed through various tests. Specimens were obtained from the manufactured samples and subjected to evaluations for tensile strength, compression, flexure, vibrations, Shore hardness, and water absorption. Results indicated that irrespective of the testing method employed, the mechanical strength properties exhibited a decline with an increase in the percentage of dammar in the hybrid resins, whereas the elasticity properties demonstrated an increase with this percentage.

Recycling leather waste, which accumulates in large quantities in tanneries, and producing packaging paper with improved properties reduces the environmental burden and is at the same time economically efficient. A modified fibrous mass of waste from tanned and untanned leather scraps, waste paper, and acrylic emulsion was obtained and packaging paper based on them was produced. Alkaline modification of tanned leather waste - chrome shavings - leads to an increase in the electrokinetic potential and, accordingly, the stability of the fibrous suspension, partial hydrolysis of skin collagen occurs with the formation of new polar groups, and at the same time, the degree of cross-linking of the skin increases. In the paper composition, new intermolecular bonds are formed between cellulose and skin collagen. The microstructure, elemental composition, morphology, thermal and physical-mechanical properties of modified chrome shavings and composite paper were determined. A significant improvement has been achieved in the main parameters of paper: surface density (decrease by 16-25%), breaking load and breaking length (increase by 15-23%), number of double bends (increase by 2-6 times) in comparison with paper obtained from pure waste paper, and also to a greater extent compared to paper obtained from unmodified leather waste.

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m−2 per 24 h for OTR and 110.24 g m−2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m−2 per 24 h and 992.86 cc m−2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging. [ABSTRACT FROM AUTHOR]

Environmental toxic pollutants and pathogens that enter the ecosystem are major global issues. Detection of these toxic chemicals/pollutants and the diagnosis of a disease is a first step in efficiently controlling their contamination and spread, respectively. Various analytical techniques are available to detect and determine toxic chemicals/pathogens, including liquid chromatography, HPLC, mass spectroscopy, and enzyme-linked immunosorbent assays. However, these sensing strategies have some drawbacks such as tedious sample pretreatment and preparation, the requirement for skilled technicians, and dependence on large laboratory-based instruments. Alternatively, biosensors, especially paper-based sensors, could be used extensively and are a cost-effective alternative to conventional laboratory testing. They can improve accessibility to testing to identify chemicals and pollutants, especially in developing countries. Due to its low cost, abundance, easy disposal (by incineration, for example) and biocompatible nature, paper is considered a versatile material for the development of environmentally friendly electrochemical/optical (bio) sensor devices. This review presents an overview of sensing platforms constructed from paper, pointing out the main merits and demerits of paper-based sensing systems, their fabrication techniques, and the different optical/electrochemical detection techniques that they exploit.

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist’s studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology.

Hemp hurd fiber, a low-value waste stream from the hemp industry, has potential downstream applications as an alternative to non-renewable plastics for single-use food service ware and packaging applications. Packaging paper substrates made from chemically pulped hemp hurd, mixed in varying ratios with bleached thermomechanical radiata pine pulp were developed and tested. Handsheets were characterized using several mechanical property tests including tensile strength, tearing resistance, burst strength, short-span compression, ring crush, together with Gurley air resistance, contact angle, and Cobb60 tests. Generally, addition of hemp hurd fibers significantly improved handsheet mechanical properties. Hot-pressing of the handsheets so as to approximate molded fiber thermoforming further enhanced their performance, with pure hemp hurd handsheets having the highest mechanical properties and barrier performance. A prototype was successfully thermoformed from hemp fiber, demonstrating overall feasibility of this fibre source for molded fibre objects.

At the beginning of the 20th century, the eclectic artist Mariano Fortuny y Madrazo patented two innovative methods for polychrome printing on fabrics and textiles, giving life to Fortuny fabric production in Venice. The first patent was related to colour application, while the second to a special machine that allows continuous printing using cylindrical rollers. Despite the descriptions, the methodology and materials used remain a secret. In collaboration with the Fortuny Museum in Venice, this research aimed at studying and identifying the different steps of Fortuny printing methodologies. Printing matrices, fabrics and raw materials found in the artist's studio were analysed in a multi-analytical campaign through digital microscopy, X-ray fluorescence (XRF), Fourier-transform infrared spectroscopy in attenuated total reflectance (FTIR-ATR), μ-Raman spectroscopy and gas chromatography–mass spectrometry (GC–MS). Three main pigments were identified in paper samples: ivory black, a copper-based pigment, and a carbon black pigment with ultramarine for blues. The pigments were bound with linseed oil and colophony in varying proportions. Polychrome silk fabrics were dyed with a base colour, and then the coloured patterns were superimposed by continuous printing. Prussian blue was identified as one of the textile inks. Results provided a better understanding of printing methodology. [ABSTRACT FROM AUTHOR]

Enhancing paper hydrophobicity is of key importance for many paper-based applications. Fatty acids or vegetable oils and their derivatives replace environmentally harmful conventional coating materials but still require challenging chemical reactions for covalent attachment onto paper. Here, we show that simple storage of olive oil-coated cotton linter paper at 70 °C and subsequent Soxhlet extraction is able to endow paper with hydrophobic properties, reaching water contact angles above 130°. In-depth chemical and morphological analytics show the relevance of temperature and air accessibility during the aging process compared with aging at ambient temperature and under the exclusion of oxygen, underlining the importance of assessing a coating's long-term performance and stability under diverse storage conditions. Simple storage of vegetable oil-coated paper at elevated temperatures followed by extraction proves to be an easy way to produce stable covalently attached hydrophobic paper coatings with exceptionally low coating amounts. [ABSTRACT FROM AUTHOR]

The forest products industries play a vital role in the economic, social, and environmental well-being of the Lake States in the United States. While various economic contribution analyses of forest products industries have been conducted to highlight the importance of such industries to regional economies, little effort has yet been made to parse out the contribution of activities in the value chain. The value chain is a series of steps involved in producing goods or services. This study used a matrix decomposition approach to estimate the economic contribution along the value chain through multiple pathways of four forest resource-based industries using wood as inputs: biomass power generation, sawmills, paper mills, and the construction of new single-family residential structures in the Lake States. The direct and indirect economic output values in 2017 resulting from the construction of new single-family residential structures were $19.1 billion, sawmills were $2.5 billion, paper mills were $17.6 billion, and the biomass power generation industry was $759 million. Of the direct and indirect economic output contributed by each industry, the highest percentage of output attributable to the logging industry was observed from the sawmills industry (12%), followed by biomass power generation (9%), paper mills (1.4%), and the construction of new single-family residential structures (<1%), respectively. The percentage of total economic output attributable to the stumpage industry in the region followed a similar trend as commercial logging for all value-chain industries. The relative economic contribution of the value-chain industries to the total economic contribution of the final industry varied based on whether the industry was a primary or secondary forest products industry and the pathways used for sourcing wood inputs. [ABSTRACT FROM AUTHOR]

This study explores the efficacy of 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and 1-hexyl-3-methylimidazolium chloride as cleaning agents for aged cellulosic artifacts. A 10% v/v acetone solution of these ionic liquids (ILs) effectively removes the brownish-yellow color of aged paper in a 10 min immersion treatment. Colorimetric analysis shows a remarkable increase in lightness (L*) by up to 40% and a decrease in red/brownish tones (b*) after IL treatment. The cleaning process also deacidifies the paper, shifting the pH to neutral-slightly basic levels and enhancing its long-term stability. Optimal pH outcomes are achieved, with ionic liquid consumption values of 0.4–0.6 g/g of paper. The FTIR analysis revealed structural changes in cellulose induced by the washing step, which is mainly due to the reorganization effect imparted by the ionic liquids. Furthermore, ILs mobilized degraded compounds and acidic species, aiding in their extraction during the restoration process. Mechanical testing indicated an enhancement in the overall tensile strength and strain at break values for IL-treated papers by up to 33%. This study demonstrates the multiple benefits of alkylimidazolium ionic liquids for preserving and restoring cultural heritage artifacts made of cellulosic materials. [ABSTRACT FROM AUTHOR]

Flow and spontaneous imbibition phenomena in porous media are important for various industrial applications, including printing and medical lateral flow assays. Their quantitative characterization is important to better understand and select the appropriate raw materials. However, standard methods often require time-consuming tests, and/or expensive equipment. Different time scales must be considered, limiting the range of possible characterization tools. A novel experimental approach based on image analysis for characterizing spontaneous imbibition processes is presented. Hence, ultra-fast diffusion may be quantitatively characterized. Models are issued from the literature to consider physical phenomena at small (milliseconds) and medium range (seconds) of time scales. The obtained experimental data fit with theoretical results, providing valuable insights into the understanding of fluid flow behavior at different time scales. Furthermore, the identification of some physical properties for either the fluid, or the substrate, based on the theoretical models are possible, as the contact angle, which remains to be otherwise challenging. This study contributes to bridging the gap between spontaneous imbibition and capillary phenomena at different time scales, their modeling, and a characterization of material and/or fluid properties paving the way for enhanced understanding and control of fluid behavior in porous media. Different papers are considered to illustrate the method. [ABSTRACT FROM AUTHOR]

The main objective of the paper was to establish the effectiveness of paper waste added to a growth medium, avoiding waste management processes, which require time and energy, but providing an efficient solution for using paper waste as a nutrient substrate for plants cultivated in containers. It was specifically aimed to evaluate the percentage of peat that could be replaced by waste paper for the ornamental plant Ficus benjamina cv. 'Golden King' in an experiment with 4 variants in 3 repetitions (V1 - 100% peat, V2 - 80% peat+20 % paper waste, V3 - 70% peat+30% paper waste, V4 -50% peat+50% paper waste) in 2023. In conclusion, based on the research carried out, it can be stated that paper waste mixed with peat in a proportion of 30% can be used as an alternative substrate. [ABSTRACT FROM AUTHOR]

Copyright of Information Library Magazine 'INFOLIB' is the property of National Library of Uzbekistan named after Alisher Navoi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Information Library Magazine 'INFOLIB' is the property of National Library of Uzbekistan named after Alisher Navoi and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In recent years, due to environmental awareness regarding the harmfulness of polymeric materials, there has been a growing interest in using papers, especially those from alternative raw materials. The importance of using all available raw materials is imperative today. Raw materials that were once viewed as waste are now of great importance because they have the ability to replace raw materials that are used irrationally or are lacking. Cereal straw is a lignocellulosic material that could be used in the paper industry and in the production of increasingly prevalent paper packaging. The aim of this research was to analyze the relationships between the qualitative parameters of straw-based printed papers containing 30% agricultural residues (wheat, barley, or triticale). The influence of two qualitative parameters (ink penetration depth and optical ink density) on the print-through was observed using multiple regression analysis on straw-based papers produced at the laboratory level. Throughout the research, 100% recycled wood paper was used as a reference sample. The results of the regression analysis showed that none of the variables individually make a statistically significant contribution to the prediction of the dependent variable in a linear context, that is, they indicate a non-linear interaction between the variables and the specific conditions under which the dependent variable reaches local extremes and changes in the gradient. Considering the results of the regression analysis and the visualization of the relationship, the model was additionally tested with other independent variables (paper type). From the results obtained, it can be concluded that the alternative straw-based paper with 30% barley pulp has the best interaction between ink and paper, which is the most similar to the reference sample in terms of printability, while the alternative straw-based paper with 30% wheat generally differs significantly from the reference paper when all three prints are considered. [ABSTRACT FROM AUTHOR]

Though books are often considered “old media” in the digital age, their production in this period in fact has been continually reimagined and redefined through new technologies of printing, especially paper and ink manufacturing. This paper explores how three specific recent printed books demonstrate this point in both form and content: David Brower’s Let the Mountains Talk, Let the Rivers Run (1995), William McDonough and Michael Braungart’s Cradle to Cradle (2002), and the 2008 Harper-Collins Green Bible. Brower’s book was printed on paper made from kenaf, a sustainable alternative to wood-based paper. Cradle to Cradle was printed on a synthetic polymer that could be endlessly remade into other products. The Green Bible was printed on recycled paper and used soy-based ink, and all verses with environmental content were printed in green. In each case, in form these printed books were meant to model innovative industrial information production while also through their content to motivate enhanced environmental consciousness.

Abstract This work presents the results of a transdisciplinary analysis performed on Harward’s Almanac (Dublin, 1666), an extremely rare volume currently housed in the National Library of Ireland. The uniqueness and historical value of the Almanac is related to the presence of nineteen handwritten poems, entered by an anonymous scribe. These record textually important English clandestine satire circulating anonymously in Dublin in the late seventeenth and early eighteenth century. Following a comprehensive historical assessment, it appeared evident that the current order of leaves was incorrect. To reconstruct the correct order of the leaves, and hence the likely sequence in which the manuscript poems were inscribed, this study employed a codicological/paleographic analysis complemented by analytical (X-ray fluorescence, XRF) and statistical (Self Organizing Map, SOM) investigation. Specifically, point XRF analysis was carried out for each handwritten page of the Almanac, allowing identification of ink elemental compositions (iron-based ink) and successfully supporting the validity of historical hypotheses on the poems’ order of inscription. The statistical organization of XRF data by SOMs allowed easy bi-dimensional visualization of the data set (54 points) and identification of ink similarities, once more validating the historical assessment.

Flow and spontaneous imbibition phenomena in porous media are important for various industrial applications, including printing and medical lateral flow assays. Their quantitative characterization is important to better understand and select the appropriate raw materials. However, standard methods often require time-consuming tests, and/or expensive equipment. Different time scales must be considered, limiting the range of possible characterization tools. A novel experimental approach based on image analysis for characterizing spontaneous imbibition processes is presented. Hence, ultra-fast diffusion may be quantitatively characterized. Models are issued from the literature to consider physical phenomena at small (milliseconds) and medium range (seconds) of time scales. The obtained experimental data fit with theoretical results, providing valuable insights into the understanding of fluid flow behavior at different time scales. Furthermore, the identification of some physical properties for either the fluid, or the substrate, based on the theoretical models are possible, as the contact angle, which remains to be otherwise challenging. This study contributes to bridging the gap between spontaneous imbibition and capillary phenomena at different time scales, their modeling, and a characterization of material and/or fluid properties paving the way for enhanced understanding and control of fluid behavior in porous media. Different papers are considered to illustrate the method.

Non-wood paper production, such as bamboo paper, is an alternative to meet the massive demand for paper consumption in the recent era. Bamboo paper, made from Bambusa vulgaris fibers and manufactured with the addition of activated nano-carbon, shows an improvement in paper quality. However, there is a potential worry with the incorporation of activated carbon since it may hinder the degradation process of paper. Concerning the substance's life cycle, degradation assisted by the fungal decomposer of this new product is crucial. This study investigated the effects of the white-rot fungi, viz. Phlebiopsis sp and Pycnoporus sp., on the degradation of bamboo paper with- or without- activated nano-carbon (BPAC and BPNAC). In vitro experiments that combined two variables (Fungal agents and Paper types) were carried out for 12 weeks. The results revealed that Pycnoporus sp. was more effective in decomposing both BPAC and BPNAC rather than Phlebiopsis sp. After being degraded by Phlebiopsis sp. and Pycnoporus sp. for 12 weeks, the remaining mass of BPAC was 64.14% and 48.96%, respectively, while the BPNAC was 69.89% and 38.25%, respectively. The ability of these fungal agents on composite-paper degradation was compared to other similar studies. Further investigation and possible applications were discussed.

Excessive copper (Cu2+) causes adverse effects on human health and the ecological environment. Traditional methods for detecting Cu2+ have drawbacks such as high detection costs, complex operating conditions, and being time consuming. Therefore, there is an urgent need to develop simple detection methods to better meet specific health and environment quality needs. In this work, a paper-based fluorescence sensor was prepared (herein referred to as the as-prepared method) by immersing filter paper in aqueous polyethyleneimine (PEI) solution, and its potential use in Cu2+ detection was investigated. The results showed that the as-prepared paper samples, with fluorescence properties obtained by aggregation-induced luminescence of PEI, have selective recognition of Cu2+ based on the internal filtration effect, and the lowest detection limit is 0.03 μM. In addition, the relative error of this method is in the range of 1.80~2.23%, which is relatively comparable to the national standard method (0.63~630 μM), demonstrating high accuracy. Therefore, paper-based sensors with a simple preparation method have potential applications in the detection of Cu2+ in water.

This work presents the results of a transdisciplinary analysis performed on Harward's Almanac (Dublin, 1666), an extremely rare volume currently housed in the National Library of Ireland. The uniqueness and historical value of the Almanac is related to the presence of nineteen handwritten poems, entered by an anonymous scribe. These record textually important English clandestine satire circulating anonymously in Dublin in the late seventeenth and early eighteenth century. Following a comprehensive historical assessment, it appeared evident that the current order of leaves was incorrect. To reconstruct the correct order of the leaves, and hence the likely sequence in which the manuscript poems were inscribed, this study employed a codicological/paleographic analysis complemented by analytical (X-ray fluorescence, XRF) and statistical (Self Organizing Map, SOM) investigation. Specifically, point XRF analysis was carried out for each handwritten page of the Almanac, allowing identification of ink elemental compositions (iron-based ink) and successfully supporting the validity of historical hypotheses on the poems' order of inscription. The statistical organization of XRF data by SOMs allowed easy bi-dimensional visualization of the data set (54 points) and identification of ink similarities, once more validating the historical assessment. [ABSTRACT FROM AUTHOR]

A significant increase in the consumption of recycled fiber products has been observed worldwide, and the industry is forced to solve the challenges of recycled fiber quality and add strength agents and/or virgin fibers to reach sufficient properties. In order to investigate whether the mechanical and air permeability properties of waste fiber (WF) material can be significantly improved by adding wood kraft fibers (KF), hemp soda fibers (HF), and ammonium persulfate oxidated cellulose nanofibrils (CNF), different fiber blends were prepared and tested. Results revealed the excellence of hemp fibers over wood fibers regarding the improvement of WF products. The results of WF after the addition of 10% mixed fibers (KF + HF) were higher than the results of a 50% KF addition. The impact of CNF depended on fiber composition and properties. A formula for modeling the CNF impact on different fiber compositions was proposed. Obtained fiber material samples showed suitability for home composting, thus contributing to the goals of the European Green Deal regarding reducing landfill waste and the development of cleaner products. [ABSTRACT FROM AUTHOR]

The pulp and paper industry plays an important role in the global economy and is inextricably linked to human life. Due to its large scale, the production process generates a large amount of wastewater, which poses a major threat to the environment. The sustainable utilization and safe treatment of pulp and paper wastewater can effectively reduce environmental pollution, improve resource utilization efficiency, protect water resources, provide economic benefits for pulp and paper enterprises, and thus promote the green and sustainable development of the pulp and paper industry. Therefore, this study discusses the pollution components of pulp and paper wastewater and their impact on the environment and human health. In this review, we aim to explore the sustainable development of pulp and paper wastewater by summarizing the characteristics of current pulp and paper wastewater, the commonly used treatment methods for pulp and paper wastewater, the application of pulp and paper wastewater recycling, and the future development direction of pulp and paper wastewater. [ABSTRACT FROM AUTHOR]

The research presented in this paper introduces a novel environmental energy‐harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper‐based hydroelectric generators (p‐HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p‐HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation‐induced electrical output performance of four different p‐HEGs are compared. Among the variants tested, the p‐HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p‐HEG generates a short‐circuit current and open‐circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p‐HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications. [ABSTRACT FROM AUTHOR]

The pineapple leaves (PL) left over in the fields after pineapple harvest or burnt out, generate waste which contributes to the release of greenhouse gases. As pineapple is one of the most harvested crops in the world, the quantity of pineapple trash and its disposal methods are challenging. The composition of PL waste makes it unique to encounter the increasing demand for renewable energy and other useful products. This review is focused on the production of different biorefinery products and miscellaneous products from PL waste. The high cellulose content in PL makes it a potential feedstock for the production of different biorefinery products like bioethanol, oligosaccharides, nitrocellulose, and humic acid apart from this, waste is also useful for the production of different products like pineapple leaf fibres, fake eyelashes, organic leather, pulp and paper. Although the opportunities, future perspectives, and challenges concerning PL waste utilization to value-added goods were also addressed. It has been demonstrated that pineapple waste conversions lower waste creation, and the products produced by the conversion would promote the 'waste-to-wealth' notion. [ABSTRACT FROM AUTHOR]

Copyright of Indonesian Journal of Forestry Research is the property of Indonesian Journal of Forestry Research and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper analyzes the potential of coatings based on xylan derivatives and chitosan to provide barrier properties and antimicrobial protection for paper food packaging and also to substitute the synthetic materials currently used in the food packaging industry. Colloidal dispersions of xylan derivatives (hydrophobized xylan with alkyl ketene dimers—XyAKD—and acetylated xylan—XyAc) and a chitosan biopolymer (Ch) were applied as coatings in single and two successive layers on a paper substrate using a laboratory automatic film applicator. The assessment of the water and fatty compound barrier properties of coated paper samples showed differences in effectiveness among xylan derivatives and their combination with chitosan. Generally, xylan derivative coatings improved the barrier and antimicrobial features of coated papers compared with native xylan. However, important improvements were obtained by adding to the coating formula a chitosan biopolymer. Thus, the best barrier properties for water, water vapors, oils and greases were obtained for paper coated with the acetylated xylan and chitosan formula in a single layer, where values of 30 g/m2.day for the water vapor transmission rate (WVTR), a 92.8° contact angle (CA) and a KIT rating of 8 were achieved. All coated paper samples exhibited the total inhibition of Bacillus sp. both after 24 and 48 h. Based on the obtained results in this study, one can conclude that the area of application of xylan hemicelluloses could be extended. Their utilization in appropriate chemical structures and combinations as coatings for paper can be a sustainable alternative for the food packaging industry. [ABSTRACT FROM AUTHOR]

The dimensional stability of paper during printing is crucial for ensuring production quality and runnability. However, inkjet printing faces inherent challenges due to the hygroscopic nature of paper and the use of water-based inks. Despite freshly printed sheets are flat, a considerable development of paper curl is often observed during storage. In this study, we establish the link between the migration of ink co-solvents and the long-term curl development of printed paper. A4 paper sheets were sprayed with a water-glycerol model ink and changes in the sheet's curvature were monitored using a 2D-laser sensor. We also investigated glycerol migration by splitting the sheets into layers and determining the glycerol distribution using high-performance liquid chromatography. Our results demonstrate the development of curl during storage as well as glycerol migration in thickness direction of the sheet, both on a comparable timescale. We thus propose that long term curl in inkjet printing can be caused by z-directional migration of the co-solvent (glycerol) over time. This study enhances understanding of the physical mechanisms that drive the long-term curl phenomenon in inkjet-printed sheets. The results can be used to optimize printing processes, allowing for the production of higher quality printed products with greater dimensional stability.

Wood-based paper fibers are inherently biodegradable. In contact with moist soil and in compost, papermaking fibers are readily broken down by soil microbes. Resistance to biodegradation is needed, as paper is used for special applications such as mulching in agriculture and forestry, the coating of construction materials, and for packing and wrapping under conditions where packaging materials may be exposed to contact with moist soil or other type microbial active contamination. A preceding study showed that paper chemical crosslinking with glyoxal, citric acid (CA), or methylated 1,3-dimethylol-4,5-dihydroxyethylene urea (mDMDHEU) results in substantially improved paper wet strength and lower paper water absorbency. The present study examined the efficiency of chemical crosslinking treatments with CA and with mDMDHEU to decrease the biodegradation rate of laboratory paper sheets and a sack paper, both made of kraft fibers. The biodegradation was examined using a 48-h enzymatic degradation test and a 2-month soil burial test. The results indicate that chemical crosslinking is an effective non-biocidal method for making sulphate kraft paper more resistant to biodegradation. In some end-uses, improved resistance to biodegradation, along with improved paper wet performance, can enhance paper performance comparable to plastic films.

Abstract Microorganisms, especially microscopic filamentous fungi, represent one of the most significant factors influencing the degradation of cultural heritage cellulosic objects. Early detection, identification and characterisation of microbial communities can help select a suitable conservation intervention and, in addition, allow possible control of its effectiveness. A combination of spectral methods and statistical data processing appears to be a suitable alternative to conventional methods for monitoring microbial contamination. The main goal of the presented research was the investigation of the spectral properties of vital and devitalised filamentous fungi Alternaria alternata, Aspergillus niger, Cladosporium herbarum, Penicillium chrysogenum, and Trichoderma atroviride, inoculated on a paper substrate Whatman in two phases—dormant (conidia) and active (mycelium). The combination of the UV-Vis-NIR and NIR Fibre Optics Reflection Spectroscopy (FORS) with the Principal Component Analysis (PCA) was set to determine whether the spectra of vital and devitalised forms of studied samples differ. The obtained results prove differences between the spectra of vital and devitalised forms of filamentous fungi, at least in one studied spectral region. Therefore, UV-Vis-NIR and NIR FORS combined with PCA seems to be a promising tool for monitoring paper-based objects' microbial contamination.

In this research work, a coated paper was prepared with poly (butylene adipate-co-terephthalate) (PBAT) film to explore its use in eco-friendly food packaging. The paper was coated with PBAT film for packaging using hot pressing, a production method currently employed in the packaging industry. The coated papers were evaluated for their structural, mechanical, thermal, and barrier properties. The structural morphology and chemical analysis of the coated paper confirmed the consistent formation of PBAT bi-layered on paper surfaces. Surface coating with PBAT film increased the water resistance of the paper samples, as demonstrated by tests of barrier characteristics, including the water vapor transmission rate (WVTR), oxygen transmission rate (OTR), and water contact angle (WCA) of water drops. The transmission rate of the clean paper was 2010.40 cc m−2 per 24 h for OTR and 110.24 g m−2 per 24 h for WVTR. If the PBAT-film was coated, the value decreased to 91.79 g m−2 per 24 h and 992.86 cc m−2 per 24 h. The hydrophobic nature of PBAT, confirmed by WCA measurements, contributed to the enhanced water resistance of PBAT-coated paper. This result presents an improved PBAT-coated paper material, eliminating the need for adhesives and allowing for the fabrication of bi-layered packaging.

The dominance of plastics in the packaging market is due to their low weight and thickness, which save transportation costs. However, their non-biodegradability poses a significant threat to the environment. Paper, on the other hand, is considered as a safer alternative due to its natural composition and biodegradability. The porous structure of paper limits its application in packaging, and its poor water resistance further restricts its use in humid environments. Therefore, lamination is a method useful tool to improve the barrier properties of paper. Additionally, the researchers are focusing on developing biodegradable and water-based coatings with anti-fat properties as a green alternative to plastic packaging. The impact of a new grease-resistant coating composed of starch, gelatin and sodium alginate on the mechanical properties of paper was investigated through tensile, tearing, and bursting strength tests. The results showed significant improvements in the mechanical properties of the coated paper sheets. Furthermore, the biodegradability test indicated that the paper samples coated with the new composition showed a 50% weight loss after one week of incubation in the soil, and after three weeks, they exhibited 100% weight loss, demonstrating their outstanding biodegradability.

Paper, which is in fact a very complex cellulose-based product derived from different lignocellulosic resources, is usually regarded as a simple omnipresent commodity in our lives. Wood fibers derived from trees are the most employed sources for papermaking purposes. From an environmental protection perspective, and for their essential role in our life (they give us the life itself through their foliar system supporting the photosynthesis process), trees should not be extensively cut down and they should be used less and less for papermaking. Thus, employment of non-woody alternative sources for papermaking could be exploited more as an attractive and feasible option.

Abstract Background There are a variety of costs associated with publication of scientific findings. The purpose of this work was to estimate the cost of peer review in scientific publishing per reviewer, per year and for the entire scientific community. Methods Internet-based self-report, cross-sectional survey, live between June 28, 2021 and August 2, 2021 was used. Participants were recruited via snowball sampling. No restrictions were placed on geographic location or field of study. Respondents who were asked to act as a peer-reviewer for at least one manuscript submitted to a scientific journal in 2020 were eligible. The primary outcome measure was the cost of peer review per person, per year (calculated as wage-cost x number of initial reviews and number of re-reviews per year). The secondary outcome was the cost of peer review globally (calculated as the number of peer-reviewed papers in Scopus x median wage-cost of initial review and re-review). Results A total of 354 participants completed at least one question of the survey, and information necessary to calculate the cost of peer-review was available for 308 participants from 33 countries (44% from Canada). The cost of peer review was estimated at $US1,272 per person, per year ($US1,015 for initial review and $US256 for re-review), or US$1.1–1.7 billion for the scientific community per year. The global cost of peer-review was estimated at US$6 billion in 2020 when relying on the Dimensions database and taking into account reviewed-but-rejected manuscripts. Conclusions Peer review represents an important financial piece of scientific publishing. Our results may not represent all countries or fields of study, but are consistent with previous estimates and provide additional context from peer reviewers themselves. Researchers and scientists have long provided peer review as a contribution to the scientific community. Recognizing the importance of peer-review, institutions should acknowledge these costs in job descriptions, performance measurement, promotion packages, and funding applications. Journals should develop methods to compensate reviewers for their time and improve transparency while maintaining the integrity of the peer-review process.

Abstract The research presented in this paper introduces a novel environmental energy‐harvesting technology that harnesses electricity from the evaporation of water using porous structural materials. Specifically, a strategy employing paper‐based hydroelectric generators (p‐HEGs) is proposed to capture the energy produced during water evaporation and convert it into usable electricity. The p‐HEGs offer several advantages, including simplicity in fabrication, low cost, and reusability. To evaluate their effectiveness, the water evaporation‐induced electrical output performance of four different p‐HEGs are compared. Among the variants tested, the p‐HEG combining wood pulp and polyester fiber exhibits the best output performance. At room temperature, this particular p‐HEG generates a short‐circuit current and open‐circuit voltage of ≈0.4 µA and 0.3 V, respectively, thereby demonstrating excellent electrical stability. Furthermore, the electrical current and voltage generated by the p‐HEG through water evaporation are able to power an LED light, both individually and in series and parallel connections. This study delves into the potential of electricity harvesting from water evaporation and establishes it as a viable method for renewable energy applications.

Paper with simultaneous fire-resistance and hydrophobicity have greatly potential applications in the fields of packing, storage and delivering information, which attracts increasing attention recently. Different from the traditional cellulose-based paper which is extremely easily damaged by water and fire, a new type of highly flexible, fire-resistant and hydrophobic paper based on Si 3 N 4 nanowires and polydimethylsiloxane (PDMS) is reported. Specially, the Si 3 N 4 @PDMS core-shell nanowires with 3D interlocking structure are designed, in which the Si 3 N 4 nanowires act as the inorganic fire-resistant frameworks and the PDMS shell with low surface energy provides the hydrophobic surface. The Si 3 N 4 @PDMS core-shell nanowires are intertwined and interlaced to form a highly flexible Si 3 N 4 @PDMS paper. The tensile strength of Si 3 N 4 @PDMS paper is 6.19 MPa, indicating the good mechanical property. The obtained Si 3 N 4 @PDMS paper has the characteristics of writability, fire-resistance and hydrophobicity. The high thermal stability of Si 3 N 4 nanowires makes Si 3 N 4 @PDMS paper exhibit excellent fire resistance. No obvious change is observed for the commercial paper with Si 3 N 4 @PDMS paper as the fire-shielding layer after heating for 30 min. In addition, the contact angles of water droplets are all greater than 110° over the surfaces of Si 3 N 4 @PDMS paper after mechanical damages, chemical corrosions and thermal treatments. Si 3 N 4 @PDMS paper can be used in oil/water separation and oil collection. More importantly, Si 3 N 4 @PDMS paper can be used for writing without being damaged by fire or water. The present work may inspire the development and application of functional paper and is expected to become a breakthrough in the traditional paper industry. [ABSTRACT FROM AUTHOR]

The coefficient of friction for different contacting materials against skin is mainly influenced by the nature of the materials (synthetic and natural fabrics), mechanical contact parameters (interfacial pressure and sliding velocities), and physiological skin conditions (ambient humidity and skin moisture content). In the present research work, seven different types of papers used in everyday life were analyzed. The physical properties of these materials were determined through tensile tests and friction tests. By comparing mechanical properties with coefficient of friction, it was possible to conclude that the coefficient of friction is strongly correlated with the mechanical properties. [ABSTRACT FROM AUTHOR]

Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6–0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (<100 g m−2 d−1), but also to grease (Kit rating: 5) and airflow (>1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates. [ABSTRACT FROM AUTHOR]