Search

Particles emitted during manufacturing processes such as polishing can represent a serious danger for the environment and for occupational safety. The formation mechanisms responsible for these dust emissions include chip formation, friction at the tool/workpiece and chip/tool interfaces, shearing and cutting. These mechanisms thus depend on workpiece and tool properties, as well as the polishing conditions. In the case of granite polishing, particle emissions during polishing can contain chemical compounds such as silica, which represent harmful health risks for the worker. It is therefore important to characterize the particles emitted and to search for possible interactions between the particles (size and composition) and the machining conditions in order to find ways of reducing emissions at the source. In this study, an investigation was undertaken to characterize the particles emitted during granite polishing as a function of polishing conditions, type of granite, and abrasive grit sizes used. Scanning electron microscopy (SEM) was employed for particle morphology characterization and particle grain size and chemical composition were evaluated using X-ray diffraction (XRD) and energy dispersive X-ray (EDX) techniques, respectively. Results show that the influence of polishing speed and feed rate on particle emission depends mainly on the granite type used, providing useful information for controlling the polishing procedure, and thereby dust emission. [ABSTRACT FROM AUTHOR]

Edge finishing is a shaping process that is extremely important in the granite and marble processing industries. It does not only shape the edge but also makes it shiny and durable. However, this process generates dust (fine and ultrafine particles) that can have a significant impact on air quality in the workshop and can put workers' health at risk. While environmental requirements and occupational health and safety regulations are becoming increasingly stringent, at the same time, industries must continue to produce quality parts at competitive prices. The purpose of this study was to examine the surface quality, the cutting forces, and the emission of fine (FP) and ultrafine (UFP) particles during wet and dry edge finishing of granite edges as a function of the machining parameters and abrasive grit sizes. Three machining operations were investigated: roughing, semi-finishing, and finishing, using diamond abrasives (with grit sizes 45, 150, 300, 600, 1500, and 3000). The experiments were carried out on two granites, one being black and the other white. The tested spindle speeds ranged from 1500 rpm to 3500 rpm and the feed rates from 500–1500 mm/min. It was found that roughing operations produce more fine particles while finishing operations produce more ultrafine particles. These particle emissions, as well as the part quality and the cutting forces are strongly dependent on cutting speed and on the grit size of the abrasive used. [ABSTRACT FROM AUTHOR]

This article presents the influence of machining conditions on typical process performance indicators, namely cutting force, specific cutting energy, cutting temperature, tool wear, and fine dust emission during dry milling of CFRPs. The main goal is to determine the machining process window for obtaining quality parts with acceptable tool performance and limited dust emission. For achieving this, the cutting temperature was examined using analytical and empirical models, and systematic cutting experiments were conducted to assess the reliability of the theoretical predictions. A full factorial design was used for the experimental design. The experiments were conducted on a CNC milling machine with cutting speeds of 10,000, 15,000, and 20,000 rpm and feed rates of 2, 4, and 6 µm/tooth. Based on the results, it was ascertained that spindle speed significantly affects the cutting temperature and fine particle emission while cutting force, specific cutting energy, and tool wear are influenced by the feed rate. The optimal conditions for cutting force and tool wear were observed at a cutting speed of 10,000 rpm. The cutting temperature did not exceed the glass transition temperature for the cutting speeds tested and feed rates used. The fine particles emitted ranged from 0.5 to 10 µm aerodynamic diameters with a maximum concentration of 2776.6 particles for those of 0.5 µm diameters. Finally, results of the experimental optimization are presented, and the model is validated. The results obtained may be used to better understand specific phenomena associated with the milling of CFRPs and provide the means to select effective milling parameters to improve the technology and economics of the process. [ABSTRACT FROM AUTHOR]