Search

Shear strength of damage zone, representing the stress threshold for rupture initiation, is a critical parameter in faulting mechanics. Despite its significance, the damage‐zone's shear strength has not been estimated in natural earthquake ruptures. Here we employed coseismic deformation and strain, kinematic slip model, and finite element modeling to determine the elastic properties and peak shear stress of coseismic damage zones along the 2021 Mw 7.4 Maduo earthquake. Through the analysis of the lowest shear stress resulting in surface ruptures and the highest stress without surface rupture, we constrained the strength within a range of 7–17 MPa. Our result is consistent with strength (5–16 MPa) of sandstone samples from laboratory tests, demonstrating the validity of this estimation. Although factors such as fault maturity and confining pressure influence strength variation, the strength can directly reflect the stress threshold required for macroscopic surface rupture formation in fault damage zones dominated by sandstone. Plain Language Summary: Shear strength of a fault damage zone inform us its ability to withstand shear stress before surface rupture occurs. This information often provides insights into the earthquakes rupture hazards near the Earth's surface. Natural earthquakes provide a perfect opportunity for us to address the question of "what is the shear strength of a fault damage zone." To this end, we require a set of comparative references: the utmost shear stress that a damage zone can withstand without surface rupture and the minimal one necessary for the zone to generate surface rupture. In this investigation, we studied the 2021 Maduo earthquake because it had multiple distinct surface rupture segments in some places but not in others. By comparing shear stress in these segments, we could figure out how strong the damage zones were. We used real observations and numerical simulations to estimate how much stress these damage zones can withstand. Our results indicate that, for damage zones embedded in intact sandstone with a Young's modulus of 15 GPa, its strength ranges from 7 to 17 MPa. Significantly, our study is the first to reveal the shear strength of damage zone from a nutural earthquake using geodetic data. Key Points: Shear modulus and shear stress for coseismic damage zone were determined using coseismic deformation and finite element modelEstimated shear strength from overlap range of coseismic stress between surface rupture and non‐rupture parts ranges from 7 to 17 MPaShear strength exhibits positive and negative correlations with confining pressure and fault maturity, respectively [ABSTRACT FROM AUTHOR]

The Türkiye-Syria earthquake doublet of 6 February 2023 (Mw 7.8 at 01:17 UTC and Mw 7.6 at 10:24 UTC) resulted in extensive damage and tens of thousands of casualties. We present the surface displacements of the two earthquakes from synthetic aperture radar (SAR) offset tracking measurements. We extracted the geometric parameters of the rupture faults from the surface displacements and early aftershock distribution, based on which we inverted the coseismic slip distributions. We then calculated Coulomb stress to investigate the triggering relationship between the earthquakes and stress transfer to neighbouring faults and regions. The coseismic ruptures of the earthquake doublet were predominantly left-lateral strike-slip motions distributed between 0 and 15 km depth. The maximum fault slip reached > 8 m (Mw 7.8) and almost 10 m (Mw 7.6). The coseismic deformation and fault slip motion are consistent with the overall westward extrusion of the Anatolian Plate relative to the Eurasian and Arabian plates. The Mw 7.8 earthquake increased Coulomb failure stress at the hypocenter of the Mw 7.6 earthquake, implying that the Mw 7.8 event had a strong positive causative effect. Moreover, coseismic stress perturbations revealed a positive Coulomb stress effect on the middle Puturge Fault, northern Dead Sea Fault Zone (DSFZ), Yesemek Fault, Antakya Fault, and Turkoglu Fault, indicating an increasing seismic hazard in these regions. [ABSTRACT FROM AUTHOR]

The 2021 Mw7.3 Maduo (Qinghai, China) earthquake ruptured ∼160 km along a poorly known secondary fault inside the Bayanhar block on the northern Tibetan plateau, which is generally parallel to the Kunlun fault. Here we integrate the interseismic (2015–2020) and coseismic geodetic observations to quantify the interseismic strain rate, fault geometry and coseismic slip distribution. Our results reveal that the seismogenic fault is featured by the low (<20 nanostrain/yr) and nearly undetectable interseismic strain rate. Three‐dimensional displacement fields and coseismic strain maps demonstrate the spatial variations of rupture kinematics due to the change of fault geometry. Our study reveals the steeply north‐dipping fault geometry of the seismogenic fault. The majority of coseismic slip occurred between 0 and 15 km with slight shallow slip deficit, which not penetrates through the inferred elastic upper crust (∼20–25 km). Our study highlights the tectonic and geometric control on fault kinematics of the Maduo earthquake. Plain Language Summary: The Bayanhar block on the north‐central Tibetan plateau experienced several major earthquakes with Mw > 6.5 on the boundary faults since the 1997 Mw7.6 Manyi earthquake, which is consistent with fast long‐term slip rates and large locking depth. However, the potential of generating large earthquakes on the faults inside the Bayanhar block is typically considered to be insignificant due to the estimated low fault slip rate (<5 mm/yr) and limited fault length. The 2021 Mw7.3 Maduo earthquake occurred on a poorly known subsidiary fault inside the Bayanhar block. Here, we use InSAR measurements prior to (2015–2020) and during the earthquake to investigate interseismic strain accumulation, to map coseismic deformation and to constrain the fault geometry as well as coseismic slip distribution of the Maduo earthquake. The three‐dimensional displacement fields and the relocated aftershocks support a slightly off vertical, dipping to the north, fault geometry. Our inversion results show that the coseismic slip is mainly distributed at a depth of 0–15 km. The kinematic analysis of the Maduo earthquake demonstrates that long‐term quantification of earthquake hazard of the subsidiary strike‐slip fault inside the Bayanhar block is challenging, because the interseismic strain rate is remarkably low and is largely undetectable by the geodetic observations. Key Points: Interseismic strain rate, coseismic three‐dimensional displacement field, finite strain and short‐term postseismic deformation of the Maduo earthquakeThe 2021 Maduo earthquake occurred on a subsidiary fault with a low (<20 nanostrain/yr) interseismic shear strain rateLong (∼160 km) rupture of the Maduo earthquake features shallow slip deficit with multi‐segment slip not penetrating through the upper crust [ABSTRACT FROM AUTHOR]