Search

[Display omitted] The exploration of emerging photocatalysts like covalent organic frameworks (COFs) is an essential but challenging endeavor to find sustainable solutions for selective organic transformations. Anthraquinones are envisaged to construct COFs for visible light photocatalysis because their derivatives are employed industrially as oxidation catalysts or organic dyes. Herein, an anthraquinone COF, TpAQ-COF, is successfully constructed with 1,3,5-triformylphloroglucinol (Tp) and 2,6-diaminoanthraquinone (AQ). Then, the selective oxidation of amines over TpAQ-COF is implemented. Amines can be effectively converted into corresponding imines over TpAQ-COF powered with green light and oxygen, during which superoxide radical anion is discerned as the pivotal reactive oxygen species. This work suggests that COFs could inherit the advantages of molecular building blocks for selective reactions powered with broad visible light. [ABSTRACT FROM AUTHOR]

Ag-ZnO/MWCNT composites were obtained by microwave-assisted, varying-charge synthesis of multiwalled carbon nanotubes (MWCNT). The structural, morphological and optical properties were characterized by: XRD, SEM, TEM, Physisorption of N2 and UVVis. The incorporation of Ag ions and MWNTC caused changes in the structure tension and in the average crystallite size of ZnO. The micrographs revealed that ZnO agglomerates were distributed on the MWNTC and that Ag particles were deposited on the surface of the heterostructure, thus the energy gap decreased. The percentages of degradation of methylene blue were 98 and 75% under ultraviolet and visible radiation, respectively, in the Ag-ZnO/CNT composites. [ABSTRACT FROM AUTHOR]

To simulate natural photosynthesis, scientists have developed an artificial Z-scheme system that splits water into hydrogen and oxygen using two different semiconductors. Researchers are striving to improve the performance of Z-scheme systems by improving light absorption, developing redox couples with high stability, and finding new cocatalysts. Here, we report the synthesis and utilization of LaFeO3/g-C3N4 as a Z-scheme system for water reduction to produce hydrogen and organic dye degradation under visible light irradiation. The as-fabricated photocatalyst revealed exceptional activity for H2 production (i.e., 351 µmol h−1g−1), which is 14.6 times higher compared to that of the single-component g-C3N4 (i.e., 24 µmol h−1g−1). In addition, the composite photocatalyst degraded 87% of Methylene Blue (MB) and 94% of Rhodamine B (RhB) in 2 h. Various experimental analyses confirmed that the exceptional performance of the LaFeO3/g-C3N4 Z-scheme catalyst is due to remarkably enhanced charge carrier separation and improved light absorption. The development of this highly effective Z-scheme heterostructure photocatalyst will pave the way for the sustainable development of newly designed Z-scheme scheme systems that will tackle energy and environmental crises. [ABSTRACT FROM AUTHOR]

In this work, α-MnO 2 /BiVO 4 nanocomposites with varying MnO 2 contents (0–7 wt%) were successfully prepared via the simple chemical method. The structure, morphology, and optical properties of prepared nanocomposites were studied by various analytical techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible absorption spectroscopy, and photoluminescence (PL) spectroscopy. The photocatalytic efficiency of α-MnO 2 /BiVO 4 nanocomposites was studied via decomposition of rhodamine B (RhB) and tetracycline (TC) under exposure to visible light (λ ≥ 420 nm). Due to good structure and composite advantages, 5%MnO 2 /BiVO 4 (MnBV-5) photocatalyst exhibited superior RhB and TC degradation efficiency to all other samples. In addition, the MnBV-5 photocatalyst showed good stability, and no apparent reduction in photocatalysis efficiency was noted after five testing cycles. Therefore, the MnO 2 /BiVO 4 nanocomposite demonstrated a good potential for photocatalytic decomposition of new water contaminants. [ABSTRACT FROM AUTHOR]

A novel photocatalyst composed of bismuth molybdate (Bi 2 MoO 6 , BMO) coupled with rhodium (Rh) nanoparticles was synthesized and evaluated for its efficiency in degrading dye contaminant under visible light irradiation. The BMO/Rh composite demonstrated a significant enhancement in photocatalytic performance, achieving a 40 % higher degradation rate of Rhodamine B (RhB) compared to bare BMO. Enhanced charge separation and reduced electron-hole recombination were primarily attributed to the synergistic effects introduced by the Rh nanoparticles. Extensive characterization techniques provided insights into the structural and mechanistic aspects of the photocatalyst. Stability tests confirmed that BMO/Rh maintained over 95 % of its initial activity after five consecutive reaction cycles, highlighting its durability. Scavenger experiments identified superoxide radicals (•O 2 -) and hydroxyl radicals (•OH) as the primary active species, contributing to the high efficiency of dye degradation. This study underscores the potential of BMO/Rh hybrids as sustainable and effective photocatalysts for environmental remediation. • Enhanced a BMO/Rh photocatalyst that improves dye degradation by 40 % under visible light. • Achieved improved charge separation with Rh nanoparticles, reducing electron-hole recombination. • Maintained over 95 % photocatalytic activity after five cycles, demonstrating high stability. • Quantified active radicals' roles in improving dye degradation efficiency. [ABSTRACT FROM AUTHOR]

In spite of the efficient redox properties of CeO2 originating from the easy inter-conversion of the Ce4+/Ce3+ couple, its large band gap (~ 3 eV) limits its photocatalytic application. Herein, we report a novel one-pot method to synthesize phase-pure Mn-doped CeO2 nanoparticles (average size ~ 7 nm) well dispersed in a network of carbon nanotubes (CNT) and also attached onto the CNT surface, as confirmed by transmission electron micrographs. The Mn and CNT content in ceria were optimised based on ability for synergistic sorptive-photocatalytic removal of a model cationic dye under UV–visible light. Diffuse reflectance spectra revealed narrowed optical band gap (only ~ 1.8 eV) in the optimised visible light active Mn-CeO2/CNT nanohybrid resulting from increased defect states due to multivalent Mn dopants (confirmed by X-ray photoelectron spectroscopy). N2 adsorption–desorption data confirmed large increase in the specific surface area compared to ceria nanoparticles leading to improved dye adsorption. The arrest of recombination of photogenerated carriers (suggested by photoluminescence quenching) due to conductive CNT support further contribute to enhancing photocatalytic activity. Thus, the findings presented in this article are relevant to materials research for environmental remediation from a surface and band gap engineering point of view. [ABSTRACT FROM AUTHOR]

In this work, we have synthesized MoS2 nanosheets (NSs) through hydrothermal as well as liquid-phase sonication methods and studied their ability to degrade organic dyes, methyl red (MR) and methylene blue (MB) under visible light irradiation. The as-synthesized photocatalysts have been characterized by powder X-ray diffraction, Raman Spectroscopy and transmission electron microscopy to confirm their structure and surface morphology. XRD patterns show that crystalline nature of MoS2 NSs prepared by hydrothermal method appears at 160°C for 15 h. In contrast, sharp and intense diffraction peaks appear for liquid exfoliation method even at room temperature, exhibiting better crystallinity of the as-prepared NSs. The difference (∆) of ~25 cm−1 between E12g and A1g modes of Raman spectra indicates formation of 5–6 layers of MoS2 from both the synthesis routes. UV–Vis spectroscopy has been utilized to study the degradation of dyes by MoS2 NSs as catalyst. Hydrothermally assisted synthesis of MoS2 NSs exhibit lesser degradation efficiency with 58.92% for MR and 49.28% for MB, while exfoliation-assisted MoS2 NSs act as better photocatalyst with 63.40 and 62.40% degradation of MR and MB, respectively. Faster degradation rate for MR compared to MB has been attributed to the presence of lesser chromophoric sites in MR. [ABSTRACT FROM AUTHOR]

Ti 3 C 2 MXenes were constructed via different strategies using HF-forming etchants or HF as etchants and were subsequently modified through alkalization to replace –F with O-containing terminal functional groups. Various analytical techniques were used to fully characterize all fabricated materials for confirming the formation of species with the desired morphologies and properties. ML-Ti 3 C 2 , etched with HF, presented a multilayered structure that made it resemble an accordion, while DL-Ti 3 C 2 , prepared using HF-forming etchants, was not completely etched, with some amounts of the parent compound's Al remaining in unformed vague laminated structures. ML-Ti 3 C 2 alkalization yielded ML-Ti 3 C 2 (OH) 2 , which was characterized by large amounts of O-containing functional groups and greatly enhanced porosity compared with that of ML-Ti 3 C 2. Methylene blue (MB) adsorption and photocatalytic degradation tests were then conducted to evaluate the functionalities of ML-Ti 3 C 2 (OH) 2 by putting it into direct application instead of being used as catalyst promoters. ML-Ti 3 C 2 (OH) 2 achieved adsorption–desorption equilibrium using MB in the dark within 30 min and 81.2% of MB was then selectively degraded over 120 min under simulated visible light irradiation. A possible degradation mechanism was proposed on the basis of the results of radical quenching experiments. This study offers a unique mechanism for directly applying MXene to the adsorption–photocatalytic degradation of organics in wastewater. For Preparation and regulation of two-dimensional Ti 3 C 2 T x MXene for enhanced adsorption-photocatalytic degradation of organic dyes in wastewater. [Display omitted] [ABSTRACT FROM AUTHOR]

Designing of an effectual heterostructure photocatalyst for catalytic organic pollutant exclusion has been the subject of rigorous research intended to resolve the related environmental aggravation. Fabricating p-n junctions is an effective strategy to promote electron-hole separation of semiconductor photocatalysts as well as enhance the organic toxin degradation performance. In this study, a series of n-type NiAlFe-layered triple hydroxide (LTH) loaded with various ratios of p-type MoS 2 was synthesized for forming a heterostructure LTH/MoS 2 (LMs) by an in situ hydrothermal strategy. The photocatalysts were characterized by XRD, SEM&EDX, TEM, FT-IR, XPS, as well as UV–vis DRS. The photoactivity of photocatalysts was tested by the degradation of Indigo Carmine (IC) dye. The optimized catalyst (LM1) degrades 100% of indigo dye in high alkaline pH under UV light for 100 min. Besides, the degradation rate of LM1 is 15 times higher than that of pristine NiAlFe-LTH. The enhanced photoactivity is attributed to the synergistic effect between NiAlFe-LTH and MoS 2 as well as the p-n junction formation. [Display omitted] • A facile method for synthesizing heterostructure-LMs photocatalyst is suggested. • The best photocatalytic performance was found in LM1 samples for dye degradation. • Superior adsorptive-photocatalytic activity of LM1 was revealed under visible light. • Photocatalytic performance of LMs was effectively exhibited even at high pH over 11. • The recyclability and mechanism of photocatalysis of LMs was identified. [ABSTRACT FROM AUTHOR]

Graphitic carbon nitride (g-C3N4) is a metal-free photocatalyst with visible light response. However, the disadvantages limit its application in a wider range, such as its small specific surface areas, fewer active sites, narrow visible light absorption range and high photogenic carrier recombination. In this paper, NaOH was used as an activator for alkaline activation of g-C3N4. The phase composition, micromorphology, surface chemical state and optical properties of g-C3N4 after activation were tested. The photocatalytic performance of g-C3N4 over organic dyes was also tested. The results showed that Na+ entered the interlayers of g-C3N4, expanding the spaces between layers. The specific surface area and pore volume of powder were increased. The active sites were increased. The band gap was decreased, and the photogenic carrier recombination was reduced. Alkaline activated g-C3N4 had better adsorption and degradation performance over rhodamine B and methyl orange than inactivated g-C3N4. Therefore, the alkaline activated g-C3N4 promotes its further application in the field of wastewater treatment. This work sheds light on the material modification through a simple method with the aim to efficiently use solar energy. [ABSTRACT FROM AUTHOR]

α–β Bi2O3 modified with Cu2+ ions in various compositions have been synthesized by hydrothermal process. The crystallinity, surface structure, elemental compositions and optical characteristics were uncovered by relevant techniques including XRD, SEM, EDX, XPS, PL, and UVDRS. Total organic carbon (TOC) analysis was performed to determine the dye degradation efficiency of photocatalyst. Highly crystalline Bi2O3 nanoparticles consisting of α–β phase heterojunctions were observed possessing crystallite sizes in the range of 30–40 nm. The photocatalytic activity of Cu2+-modified Bi2O3 composites was studied using RhB dye under the illumination of visible light. The results reveal that addition of Cu2+ ions into Bi2O3 lattice significantly improved the degradation rate over the pure sample. The highest activity was obtained for sample containing 2 mol % Cu in Bi2O3 lattice where complete degradation of the pollutant was attained in 120 min. The increased activity is largely ascribed to the effective separation of charge carriers due to Cu2+ doping and formation of α–β phase heterojunctions in Bi2O3.The effect of pH conditions and role of active species on degradation kinetics were also examined. [ABSTRACT FROM AUTHOR]

In pursuit of the appropriate method for complete removal of organic effluents from surface water, Ag modified g-C 3 N 4 materials as a photocatalyst gained considerable attention. In this paper, Ag doped g-C 3 N 4 materials were prepared by a facile one-pot pyrolysis method. The synthesized photocatalysts were studied using different analytical techniques like XRD, HR-TEM, XPS, UV, FTIR, PL spectroscopy, etc. The prepared photocatalyst materials were used for the visible light photodegradation of IC dye as an organic pollutant and for self-cleaning applications. The obtained results indicate that the optimized Ag doped g-C 3 N 4 (CNA-1) sample exhibits 79.97 % degradation efficiency in 30 min with efficient self-cleaning performance. The enhanced photocatalytic activity of CNA-1 can be attributed to the incorporation of Ag, which plays a pivotal role in absorbing visible light. Furthermore, cycling tests were employed to evaluate the stability and reusability of material. The possible photocatalytic mechanism was proposed from trapping experiments. [Display omitted] [ABSTRACT FROM AUTHOR]

• A 2D covalent organic framework Por-PD-COF as selective adsorbent and photocatalyst was designed and synthesized. • Por-PD-COF could selectively and competitively adsorb MB from the mixed organic dyes aqueous solution. • Por-PD-COF could photodegrade MB effectively under visible light. • Por-PD-COF can be recycled and reused after absorption or photocatalysis. In this work, amide bonds linked 2D porphyrin-based covalent organic framework (Por-PD-COF) was designed and synthesized through condensation reaction between meso -tetrakis (p -carboxyphenyl) porphyrin (TCPP) and para -phenylenediamine (PD). Large surface area, abundant active sites and good stability of Por-PD-COF made it can quickly and efficiently absorb methylene blue (MB) selectively and remove it from aqueous solution. More importantly, in different mixture of organic dyes including RhB and MB, MB and MO, Por-PD-COF can selectively adsorb MB with a large adsorption capacity (328.57 mg·g−1), while a little MO and hardly RhB because of the unique charge selectivity and specific pore size. Especially in the mixture solution of MO and MB, compatitive adsorption appeared, MB can substitute the adsorbed MO on the active sites in the channel of Por-PD-COF. Furthermore, with the band gap narrow to 1.02 eV, Por-PD-COF could be used as efficient photocatalyst to degrade MB (99%, 180 min) directly under visible light irradiation, and can be reused for four times with almost no absorptive and photocatalytic capacity losing. The possible adsorption and photocatalytic mechanisms of Por-PD-COF were also proposed. As a result, with the uncomplicated preparation, effective and selective adsorption and reusability, Por-PD-COF was a promising specific adsorbent and photocatalyst for further application in specific organic molecules separation and organic waste removal from aqueous solution. [ABSTRACT FROM AUTHOR]

Photodegradation of organic pollutants using metal oxides has shown extraordinary promise owing to the catalytic efficacy, low cost, less noxiousness, and good chemical constancy. In this research, pure and transition metal ions (Cu)-doped V 2 O 5 nanosheets were synthesized and investigated for their photocatalytic efficiency using methyl blue (MB) and rhodamine B (RhB) organic dye pollutants under visible light irradiation. The orthorhombic crystal phase was confirmed by XRD analysis, which exhibited a stable phase upon incorporating Cu dopant ions. Optical properties were examined using optical absorption spectroscopy, while a reduced band gap was observed in the doped V 2 O 5 nanosheets over the undoped sample. EIS analysis confirmed lower charge resistance in doped V 2 O 5 nanosheets. The Cu dopant incorporation into the host matrix considerably enhanced photodegradation efficiency for MB and RhB impurities under light illumination. The improvement in catalytic efficacy is attributed to dopant ions that can separate photoinduced charge carriers and the quick movement of the charge. Moreover, comparatively lesser crystalline size, improved specific surface area, and hydroxyl group onto the catalyst surface are quite advantageous to offer better photocatalytic activity of Cu-doped V 2 O 5 nanosheets. [Display omitted] • Pure and Cu-doped V 2 O 5 nanosheets were synthesized using hydrothermal method. • XRD analysis confirmed orthorhombic crystal phase of synthesized materials. • Photodegradation of MB and RhB pollutants were examined under visible light. • Doped V 2 O 5 catalyst shows 95.4% and 91.2% degradation of MB and RhB. • · O 2 −, OH · species played a major contribution in the removal toxic pollutants. [ABSTRACT FROM AUTHOR]

The present work demonstrates a facile hydrothermal synthesis of Plasmonic Au–TiO 2 nanocatalyst followed by its successful application for complete photocatalytic dye degradation (oxidation) in batch and continuous flow process under natural sunlight as well as visible and UV light. The Au-TiO 2 nanocatalyst was synthesized by a hydrothermal method at basic pH conditions. It was meticulously analyzed by a variety of spectroscopic (UV-Vis, Raman, FTIR, PL, Powder XRD, ED-XRF, XPS), microscopic (FE-SEM with elemental mapping, TEM), and thermal (DSC) techniques. The characterization results showed that monodisperse Plasmonic Au(0) nanoparticles with a mean diameter of 12 ± 1 nm are homogeneously deposited on Anatase TiO 2 crystals. The nanocatalyst showed complete photocatalytic degradation of various dye compounds (Eosin Yellowish, Indigo Carmine, Methyl Orange, Methylene Blue, and Rhodamine B) under visible light or sunlight as confirmed through UV-Vis spectra, mass spectral study, and TOC analysis of dye solutions. A continuous flow process using a specially designed photoreactor was accomplished with a long catalyst lifespan, easy processibility, and low cost. Easy synthesis of the catalyst, its very detailed characterization, and its efficient catalytic studies to completely degrade various dye molecules under visible light source in the absence of any added oxidizer (O 2 , H 2 O 2 , KMnO 4 , Organic peroxides) and the demonstration of continuous flow process are significant highlights of the present work. A plausible mechanistic pathway is also presented in line with the previous literature reports and presently observed phenomenon. [Display omitted] [ABSTRACT FROM AUTHOR]

Adopting a facile one-step solvothermal method, CN/MgAl 0.80 Ce 0.20 -LDH, a lamellate composite of graphitic carbon nitride (g-C 3 N 4 , CN) and Ce-doped MgAl-layered double hydroxide (LDH), was synthesized. Profiting from the combined effect of Ce-doping and CN-LDH composition, CN/MgAl 0.80 Ce 0.20 -LDH possesses large specific surface area (52.71 m2 g−1) and high separation efficiency of photogenerated charge. When used to remove organic dye Congo red (CR), the composite exhibits enhanced efficiency which can be attributed to the synergetic performance of adsorption and photocatalysis. As a result, ~49% CR (50 mg L−1) can be adsorbed by CN/MgAl 0.80 Ce 0.20 -LDH and the CR degradation efficiency exceeds 90% within 180 min under light-emitting diode (LED) visible light irradiation, which is much higher than that of pristine CN (48.77%). The augmented surface area and proliferated active sites benefit the increase of adsorption capacity. The enhanced photocatalytic performance can be attributed to the efficient transmission of photogenerated electrons and holes between CN and MgAl 0.80 Ce 0.20 -LDH. Electrochemical impedance spectroscopy (EIS) analysis and photoluminescence (PL) analyses confirmed the effective separation of photogenerated electron-hole pairs in CN/MgAl 0.80 Ce 0.20 -LDH, while electron spin resonance (ESR) results verified the derivation of superoxide radicals (·O 2 -) species amid CR photocatalytic degradation. [Display omitted] [ABSTRACT FROM AUTHOR]

This study presents core/shell Ag/SnO2 nanowires (Ag/SnO2NWs) as a new photocatalyst for the rapid degradation of organic compounds by the light from the visible range. AgNWs after coating with a SnO2 shell change optical properties and, due to red shift of the absorbance maxima of the longitudinal and transverse surface plasmon resonance (SPR), modes can be excited by the light from the visible light region. Rhodamine B and malachite green were respectively selected as a model organic dye and toxic one that are present in the environment to study the photodegradation process with a novel one-dimensional metal/semiconductor Ag/SnO2NWs photocatalyst. The degradation was investigated by studying time-dependent UV/Vis absorption of the dye solution, which showed a fast degradation process due to the presence of Ag/SnO2NWs photocatalyst. The rhodamine B and malachite green degraded after 90 and 40 min, respectively, under irradiation at the wavelength of 450 nm. The efficient photocatalytic process is attributed to two phenomenon surface plasmon resonance effects of AgNWs, which allowed light absorption from the visible range, and charge separations on the Ag core and SnO2 shell interface of the nanowires which prevents recombination of photogenerated electron-hole pairs. The presented properties of Ag/SnO2NWs can be used for designing efficient and fast photodegradation systems to remove organic pollutants under solar light without applying any external sources of irradiation. [ABSTRACT FROM AUTHOR]

• MnS/Ag 2 WO 4 NCs was prepared by chemical co-precipitation method. • The NCs showed efficient visible light photocatalytic activity than individual particles. • MnS/Ag 2 WO 4 showed potent anti-microbial activity against gram positive and gram negative microorganisms. • Experimental results demonstrated that OH• and •O2- are the major reactive species involved in dye degradation. • MnS/Ag 2 WO 4 NCs showed MB dye degradation potency of 92.3%. In this study, the novel MnS/Ag 2 WO 4 photocatalyst was synthesized via chemical co-precipitation method and investigated its physical and structural characteristics using HR-TEM, N 2 adsorption and desorption studies, FT-IR, EDAX, PL, UV–vis DRS, ESR, XPS and XRD. The estimation of photocatalytic activity of synthesized photocatalysts was done using methylene blue (organic dye) in aqueous solution. The photocatalyst efficiency was superior for MnS/Ag 2 WO 4 with degradation of 92.3% when compared with bare MnS (67.23%) and Ag 2 WO 4 (58.93%). The kinetic study reveals that higher reaction kinetic rate achieved by the MnS/Ag 2 WO 4 compared with MnS and Ag 2 WO 4. The scavenging test reveals that •OH and O2-• took the important part in the degradation process. The six cycles test reveals that the photocatalyst is highly reusable by showing similar degradation efficiency throughout the six cycles. MnS/Ag 2 WO 4 was also possessed potential broad spectrum anti-microbial activity against B. subtilis and E. coli. Hence, MnS/Ag 2 WO 4 heterostructure can be used as an excellent photocatalyst as well as an effective anti-microbial agent. MnS/Ag 2 WO 4 would be a cost-effective, highly efficient photocatalyst and a good antimicrobial agent. [ABSTRACT FROM AUTHOR]