Search

Control inputs of fully constrained cable-driven parallel robots (CDPRs) are constrained by the positiveness of the cables tension, as cables merely apply tensile forces. The positive tension distribution (PTD) in CDPRs is usually guaranteed with iterative optimization techniques, utilizing the redundant actuation of the CDPR. The iterative nature of the conventional PTD limits their real-time application since the worst-case computation time of the iterative methods is not predictable. In addition, optimization methods are prone to model uncertainties. This article addresses the PTD problem in the fully constrained CDPRs with a control viewpoint. In the proposed approach, the PTD algorithm is an integral part of the controller, which explicitly generates positive values for the cables tension. To this aim, a saturation-type function is coupled with the controller, and its effect is compensated using a nonlinear disturbance observer. The stability of the proposed control scheme is also investigated in detail through Lyapunov’s second method, considering a nonsingular terminal sliding mode controller. Furthermore, the performance of the proposed methodology is compared with the conventional method for a six-degrees-of-freedom CDPR, in the presence of uncertainties. Finally, the effectiveness of the proposed control scheme is investigated through experiments. [ABSTRACT FROM AUTHOR]

This article presents a systematic robust current control design approach for three-phase voltage-source converters. Robustness is guaranteed by combining intrinsic passive properties of the impedance uncertainty at the point of common coupling together with stability results from a passivity-based control theory. This approach ensures stability against typical uncertainty sources at mid and high frequencies, such as cable resonances or other converters interaction, with significant less conservative performances than the obtained with the traditional robust control theory. The approach uses multiobjective controller synthesis formulation that allows us to logically combine robustness requirements with performance objectives avoiding heuristic iteration over the control structure and parameters. The controller synthesis is performed by means of a nonsmooth $\mathcal {H}_{\infty }$ optimization technique that tunes all free parameters of a vector-based controller function, which constraints its structure. This results in a synthesized controller with lower order than those obtained with convex optimization definitions of the $\mathcal {H}_{\infty }$ control problem. The design methodology is validated in time and frequency domain by means of theoretical analysis and experimental results with three usual grid filters: L, LCL, and LLCL. [ABSTRACT FROM AUTHOR]