Search

In this study, an investigation of winding structures is performed for 3-phase unbalanced and asymmetric winding permanent magnet (PM) machines including different slot-pole combinations. There are two different cases for unbalanced winding (UBW) structure: 1) Stator slot number of the machine is divisible by three, 2) Stator slot number of the machine is not divisible by three. Only the first case is examined in this paper. The unbalanced winding layouts are created for minimum unbalance and maximum winding factor. Total magneto motive force (MMF) distributions for nine different slot-pole combinations and their harmonic contents are presented. Variation of the amount of unbalance for different slot-pole combinations is also provided in the paper. Key issues arising from the asymmetric and unbalanced windings such as degree of asymmetric and unbalanced magnetic pull are explored. A prototype motor with 39-slots and 12-poles has been manufactured for experimental verification. A comparison between the finite element analysis (FEA) results and experimental results is presented for the prototype motor for both no-load and on-load conditions. It is shown that the asymmetric and unbalanced winding PM motors have significant potential for applications requiring smooth torque operation. [ABSTRACT FROM AUTHOR]

Consequent-pole (CP) permanent magnet (PM) configuration suffers asymmetric electromagnetic characteristics although it saves PM usage. The CP-based stator-PM synchronous machines are investigated in this paper, with particular reference to symmetrical issues. The electromagnetic performances of the CP-based stator-PM synchronous machines are firstly evaluated. Afterwards, the rule of even order harmonics cancellation is presented for different slot/pole number combinations and winding layouts, based on which symmetrical phase flux-linkages can be obtained although the unbalanced magnetic flux naturally occurs. Moreover, based on the three-dimensional finite element analysis, the unipolar end leakage-flux caused by the asymmetric magnetic field is identified, and the risk of the shaft magnetization is revealed. Finally, a pair of prototype machines are fabricated and measured to validate the analyses. [ABSTRACT FROM AUTHOR]

This paper formulates the difference in base frequency and maximum torque between distributed and concentrated windings taking into account the air-gap modulation of concentrated-winding permanent magnet (PM) motors. The design superiority is typically confirmed for each winding type during a development period by using time-consuming finite element analysis (FEA). We propose a quantification that enables motor designers to easily judge, at the initial design stage, a superior winding type and to shorten a design period. Throughout our formulation, we found that the distributed-winding PM motors, in principle, have larger q-axis inductance and smaller d-axis inductance than the concentrated-winding motors, which leads to a decrease in the base frequency. On the other hand, the distributed winding inherently has higher winding factor and needs shorter stack length of core than the concentrated winding for identical torque output, which results in an increase in the base frequency. And also, we theoretically quantified the difference in reluctance-torque contribution between the two winding types and found that it was too small to have much impact on practical design. We applied the proposed formulae to a 0.2-kW concentrated-winding Nd-Fe-B magnet motor and were able to quantify the base frequency, the maximum torque, and the minimum stack length of core for a distributed-winding motor with high accuracy without having to rely on FEA. The FEA and measurement results demonstrated the validity of the proposed approach for the fabricated distributed-winding PM motor. [ABSTRACT FROM AUTHOR]

Axial-flux permanent magnet (AFPM) machines are gaining popularity in low-speed and high torque applications due to their high torque density, high efficiency, and compact structure. In this article, a dual-rotor slotless AFPM (DRSAFPM) machine equipped with equidirectional toroidal winding (EDTW) is proposed and compared with that equipped with conventional single-layer and double-layer concentrated windings (CWs). First, the differences between the DRSAFPM machine with EDTW and that with conventional CWs in coil layout, electromotive force (EMF), and winding magnetomotive force are revealed. Considering the special coil layout of the EDTW, the coil factor and size equations of the DRSAFPM machines with EDTW and conventional CWs are presented. Second, the electromagnetic performance including air-gap field, back-EMF, torque, and efficiency of the DRSAFPM machines with EDTW and conventional CWs are analyzed based on the three-dimensional finite-element method. The simulation results validate the correctness of the coil factor and size equations and indicate the EDTW–DRSAFPM machine has superiority in back-EMF amplitude and torque density. Finally, a prototype of the EDTW–DRSAFPM machine is manufactured and tested, which validates the feasibility of the EDTW–DRSAFPM machine and the correctness of the analysis. [ABSTRACT FROM AUTHOR]

This article proposes a consequent-pole unequal Halbach vernier wheel motor (CPUHVWM), which effectively reduces the self-flux leakage between permanent magnets, and an optimization method is proposed to improve the motor optimization efficiency and shorten the optimization time. The key variables are selected by the sensitivity analysis, and a polynomial function suitable for the optimization algorithm is constructed based on the response surface method. Based on the particle swarm optimization algorithm, the weights of different particle search areas are assigned to improve the overall optimization efficiency of the algorithm. Furthermore, to verify the superiority of the performance of the proposed structure and the applicability of the algorithm, the other two similar motor structures are compared, and the algorithm is adopted for the optimization. The optimized electromagnetic characteristics are compared by the finite element method. Finally, the prototype with the optimal parameters is built, and the effectiveness and advantages of the optimization algorithm are verified by experiments. [ABSTRACT FROM AUTHOR]

This article presents a new type of surface-mounted three-phase permanent magnet synchronous motor with the same number of poles and slots which has obvious advantages in cogging torque. Since the same-pole and same-slot three-phase permanent magnet motor has three or more slot types and the slots are not evenly distributed on the circumference, this article adopts an accurate subdomain model that considers the position and slot width of each slot separately to perform an analytical calculation of the magnetic field. The motor is divided into three subdomains and modeled by Maxwell’s equations, and the magnetic scalar vector equation satisfied by each subdomain is solved by the method of separation of variables. A 24-pole 24-slot three-phase permanent magnet motor consisting of 13-pole 12-slot and 11-pole 12-slot is used to verify the correctness of the proposed analytical computational model. Compared with the finite element analysis, the proposed analytical model shows high accuracy in the calculations of the magnetic flux density of the three subdomains. [ABSTRACT FROM AUTHOR]

In this article, two double flux modulation permanent-magnet machines (DFMPMs) with PMs on both stator and rotor are introduced. The two DFMPMs share a similar operation principle. However, due to the different stator-PM arrangements, the two DFMPMs show different performances. In order to analyze their performance characteristics, their analytical models are built and verified by finite element analysis (FEA). Moreover, to quantitatively compare their electromagnetic performances more accurately, the two DFMPM topologies are optimized, respectively, and compared in terms of back-EMF, cogging torque,rated torque, torque ripple, power factor, and efficiency. Finally, the DFMPM topology with relatively better performances is built and tested. The experimental results match well with the FEA simulations. [ABSTRACT FROM AUTHOR]