Search

Permanent magnet synchronous machines (PMSMs) have garnered increasing interest because of their advantages such as high efficiency, high power density, wide speed range, and fast dynamics. They have been employed recently in several industrial applications including robotics and electric vehicles (EVs). However, PMSMs have highly nonlinear magnetic characteristics, especially interior PMSMs, due to the existence of reluctance torque. Nonlinearity complicates not only machine modeling but also control algorithms. An accurate machine model is the key aspect for the prediction of machine performance as well as the development of a high-performance control algorithm. Hence, this paper presents an accurate modelling method for PMSMs. The proposed model method is applicable for all PMSMs, even multiphase machines. This paper considers a fractional slot concentrated winding 12/10 interior PMSM (IPMSM) for this study to demonstrate the effect of magnetic saturation and special harmonics. The developed model considers accurately the magnetic saturation, mutual coupling, spatial harmonics, and iron loss effects. It utilizes finite element analysis (FEA) to estimate the precise magnetic characteristics of IPMSM. The finite element model is calibrated precisely using experimental measurements. The iron losses are estimated within the simulation model as d- and q-axes current components. The model accuracy is validated experimentally based on a 12/10 IPMSM prototype. [ABSTRACT FROM AUTHOR]

In this paper, superposition methods including the superposition of a single stator tooth and the superposition of a single rotor tooth, are proposed to predict the open-circuit performances of flux-reversal permanent magnet (FRPM) machines. By the proposed superposition methods, the electromagnetic performances, such as air-gap flux density, electromotive force, cogging torque, and unbalanced magnetic pull (UMP) are investigated and verified by 2D finite element analysis (FEA). Further, according to the superposition methods, cogging torque reduction techniques can be acquired from both stator side and rotor side. In addition, the influence of stator-slot/rotor-pole-pairs (slot/pole) combination on UMP is also studied, and consequently, a reasonable slot/pole combination rule is suggested to avoid UMP. Then, an improved configuration for UMP reduction is also investigated and verified by FEA. Finally, the prototype machines are manufactured and tested to further verify the theoretical analysis and FEA predictions. [ABSTRACT FROM AUTHOR]

Oriented steel has higher permeability and lower losses in the direction of orientation (the rolling direction) than non-oriented steel. However, in the transverse direction, oriented steel typically has lower permeability and higher losses. The strategic use of oriented steel in a modular Permanent Magnet Synchronous Machine (PMSM) stator can improve machine performance, particularly when compared to a machine designed with non-oriented steel, by increasing both torque and efficiency. Typically, steel manufacturers provide magnetic properties only in the rolling and transverse directions. Furthermore, in modern Finite Element Analysis (FEA) software, the magnetic properties between the rolling and transverse directions are interpolated using an intrinsic mathematical model. However, this interpolation method has proven to be inaccurate; to resolve this issue, an improved model was proposed in the literature. This model requires the magnetic properties of the oriented steel in between the rolling and transverse directions. Therefore, a procedure for extracting the magnetic properties of oriented steel is required. The objective of this work is to propose a method of determining the magnetic properties of oriented steel beyond just the oriented and transverse directions. In this method, flux-injecting probes, also known as sensors, are used to inject and control the flux density in an oriented steel segmented stator in order to extract the properties of the oriented steel. These extracted properties are then used to model an oriented steel modular stator PMSM. The machine's average torque and core losses are compared with conventional, non-modular, non-oriented steel stator PMSM, and modular, non-oriented steel stator PMSM. It is shown that both the average torque and the core loss of the oriented steel modular stator PMSM have better performance at the selected number of segments than either of the two non-oriented steel stators. [ABSTRACT FROM AUTHOR]