Search

In the headcut erosion process, flow energy is transformed and consumed when runoff is used to transport sediment. Therefore, flow energy variations are critical in the study of headcut erosion. The aim of this study was to illustrate the effects of the upslope inflow discharge and slope gradient on flow energy and the response of the sediment yield of headcut erosion to flow energy variations in China's Loess Plateau. This study examined the headcut erosion using slope gradients ranging from 1° to 7° and designed and upslope inflow discharges of 3.6, 4.8, 6.0 and 7.2 m3·h−1. The rainfall intensity was set as invariable 0.8 mm·min−1. The results showed that the kinetic energy at the downstream gully bed was 0.03~0.16 J·s−1 lower than that in the upstream catchment area because of the concentrated flow drop at the gully head. The potential energy at the summit and bottom of the plot were both affected by upstream inflow discharge and slope gradient. The flow energy consumption values of the gully head increased by approximately 1.26 times as the inflow discharge increased by 1.2 m3·h−1. Greater energy consumption occurred at the gully head than in the upstream catchment area and downstream gully bed, and the gully head contribution to the flow energy consumption was 44.30~64.29%, which showed an increasing trend as the upslope inflow discharge increased and slope gradient decreased. The influence of the slope gradient on the sediment yield was stronger than that of the upslope inflow discharge, and a nonlinear regression equation was established to calculate the sediment yield. The flow energy consumption showed a significant correlation with the sediment yield (p < 0.01). Our results could enhance the understanding of the flow energy variations and headcut evolution process during headcut erosion and can also be helpful in the design of gully erosion prevention measures. [ABSTRACT FROM AUTHOR]

Downdrift shoreline recession associated with the construction of a shore-crossing hard structure represents one of coastal erosional hotspots that must be addressed for an integrated, sustainable coastal zone management. To prevent siltation within the navigation channel, two rubber-mounted jetties were installed at the Sheyang River mouth on the open mesotidal muddy coast in Jiangsu province, China, in October 2013. The north jetty is 7.9 km long, while the south jetty is 7.8 km long. The net longshore sediment transport is from the north to the south due to flood-tide dominance. As disclosed by high-resolution satellite images, a 36-km-long downdrift shoreline stretch had experienced remarkable retreats at alongshore varying rates by March 2019. The eroding shoreline planform does not resemble a classic "S" shape, a crescentic shape, or a parabolic shape but an irregularly indented curved shape. Transect topographic survey also reveals an almost immediate response of the downdrift coast from the original accretionary scenery to an erosional regime, with the erosion front translocating downcoast at a much faster speed than a normal speed of 1–1.5 km/yr. Using FVCOM and SWAN, 2DH process-based numerical simulations are performed to simulate the flow, the sediment transport, and the yearly-magnitude accretion/erosion distribution in the jetty-affected area by a representative tidal force and an annual-magnitude wave force. The results demonstrate that the reciprocal tidal flow is predominantly responsible for the muddy sediment accretions at downdrift intertidal and surf zones shallower than a 4.0-m isobath, whereas big wind waves play a decisive role in triggering and developing the downdrift erosional process. The predicted spatial extent of the downdrift erosional segment matches closely the actual eroding front. The loss of the net annual longshore sediment transport volume, i.e., 3.08 million m3 due to the blockage by the twin jetties is recovered from a much larger spatial extent than the 36-km-long retreating shoreline stretch. With regard to the Bruun model, the one-line model, the headland-bay model, and the 2DH numerical model, the potential maximum recession length and the planform shape of the downdrift erosional shoreline arc are further elaborated to gain new insights into the spatial and temporal impact of a hard structure on the adjacent shoreline and flat (beach). [ABSTRACT FROM AUTHOR]

Topographic relief and bedrock fractures caused by fault activity can accelerate surface erosion, suggesting that erosion rates increase with decreasing distance to the fault core. To test this hypothesis, we used 10Be cosmogenic nuclides to quantify catchment-wide erosion rates at various distances from a fault in the footwall of the Daqing Shan fault system, a 200-km-long active normal fault in Inner Mongolia, northern China. In addition, in order to examine the influence of topography and bedrock fractures on the surface erosion processes in the fault-weakened zone, their relationships with hillslope erosion, fluvial sediment grain size and transport efficiency, erosion rates, and erosion coefficients were studied. The resulting catchment-wide erosion rates ranged from 0.01 ± 0.00–0.13 ± 0.01 mm yr−1. These erosion rates and coefficients were unaffected by distance from the fault. The analysis of topography, bedrock fractures, and hillslope erosion yielded distinct hillslope erosion processes at different distances from the fault. Rapid mass wasting events, such as landslides, occurred at <15 km from the fault in steep, rocky hillslopes with abundant bedrock fractures. In contrast, at >15 km from the fault, hillslopes gradually become more gentle and soil-mantled. These spatial-slope configuration differences result in a decrease in sediment grain size delivered to river channels with increasing distance from the fault. Once sediments enter river channels, they impact fluvial transport capacity by influencing the initial motion threshold of sediment. Correlation analyses revealed that sediment transport efficiency in channels directly controls the catchment-averaged erosion rate and coefficient. This mechanism explains why the erosion rate remains insensitive to variations in topography and bedrock fractures in fault-weakened zones. • Study of patterns and controls on erosion rate across Daqing Shan fault zone. • Cosmogenic nuclide 10Be used to derive catchment-averaged erosion rate. • Erosion rates do not vary with distance from the fault. • Erosion rate remains insensitive to variations in topography and bedrock fractures. • Sediment transport efficiency in channels controls erosion rate. [ABSTRACT FROM AUTHOR]