Search

In this study, monodispersed NiSe@Ni particles were successfully anchored on graphene sheets by electroless nickel plating combined with a chemical-vapor-reaction process, in which the nickel particles were first deposited onto graphene sheets and subsequently transformed in situ into NiSe@Ni at an elevated temperature. The obtained product showed a unique multi-dimensional coupling structure, namely, monodispersed NiSe@Ni particles (0 D) anchored on graphene sheets (2 D), which enabled maximum synergy on the specific surface area, conductivity, and the electrochemical activity of NiSe, Ni, and graphene multi-phases. The NiSe@Ni/graphene composite showed a specific capacity of 302 mAh g−1 at a current density of 1 A g−1 in a potassium-hydroxide-electrolyte solution. Meanwhile, the hybrid supercapacitor of NiSe@Ni/graphene//AC exhibited a high energy density of 68.0 Wh kg−1 at 803.0 W kg−1 and maintained 72.53% of the initial capacity after 10,000 cycles at a current density of 10 A g−1. [ABSTRACT FROM AUTHOR]

The phase-transition engineering has shown great potential in designing high-performance energy storage and catalytic materials. Herein, we report the phase transition and selenium vacancy induced by the trace boron doping into CoSe 2 , realizing an enhancement of the performance of supercapacitor. The trace amounts of boron doping (∼ 0.07 wt%) induce the phase-transition from cubic to orthorhombic structures and trigger selenium vacancies in orthorhombic cobalt diselenide (o-CoSe 2). The doped defective cobalt diselenide (o-CoSe 2−x /B) exhibits a high specific capacity of 376.3 mA h g−1 at a current density of 1 A g−1, which is much larger than that of the undoped cubic cobalt diselenide (211.3 mA h g−1) and annealed cubic cobalt diselenide (208.3 mA h g−1). A hybrid supercapacitor assembled using o-CoSe 2−x /B and activated carbon delivers a high energy density of 102.5 W h kg−1 at a power density of 850.4 W kg−1 and maintains an energy density of 34.0 W h kg−1 at 16,767.1 W kg−1. In addition, the device possesses an excellent cycling stability that remains 83.5 % of the initial capacitance after 25,000 cycles at a current density of 10 A g−1. These results demonstrate that the boron is a new efficient dopant that can dramatically improve the supercapacitor performance of CoSe 2 through the structural phase transition and defect engineering. [Display omitted] • Trace amounts of boron induces phase-transition from c-CoSe 2 to o-CoSe 2. • Se vacancies defects arise with the help of boron doping engineering. • The o-CoSe 2−x /B shows the enhanced performance as electrode for supercapacitor. • Providing an efficient dopant for design of CoSe 2 based energy storage materials. [ABSTRACT FROM AUTHOR]

• Zn-substituted Co 3 O 4 microspheres with a rough surface are synthesized. • Zn substitution modifies the lithium storage mechanism of Co 3 O 4 anodes. • The optimized sample exhibits good performance within half and full cells. Substituting Co 3 O 4 submicron spheres with Zn ions modifies the lithium storage mechanism, leading to an enhanced electrochemical performance. [Display omitted] Carbonaceous materials are used as the anode for rechargeable lithium-ion batteries (LIBs), however, lithium dendrites are easily formed during cycling due to the low lithium insertion potential (~0.1 V versus Li+/Li). As alternative anodes, transition metal oxides based on conversion mechanism have attached much attention. But the high lithiation potential (>1.0 V vs. Li+/Li) usually leads to a low output voltage and energy density when used in a full cell configuration. Herein, Zn-substituted Co 3 O 4 submicron spheres are successfully synthesized by a facile solvothermal reaction and subsequent calcination method. When used as the anode for LIB, the optimized sample shows a specific capacity of 686 mAh g−1 at 0.8 A g−1 after 500 cycles, and a specific capacity of 692.9 mAh g−1 at a higher current density of 3.2 A g−1 in a half-cell. Thanks to the controlled Zn substitution, the discharge voltage plateau is 0.16 V lower than that of the pure Co 3 O 4 anode at a current density of 0.4 A g−1. Further investigation of the 0.5Zn-Co 3 O 4 //LiCoO 2 full cells also displays a high capacity (400.7 mAh g−1 after 200 cycles at 0.4 A g−1) and an excellent rate capability (658.1 mAh g−1 at 1.6 A g−1) compared with the Co 3 O 4 //LiCoO 2 full cells. This work confirms that substituting suitable metal elements into sub-micron conversion based anodes can reduce the voltage plateau, which is of great significance for the practical applications in high performance energy storage devices. [ABSTRACT FROM AUTHOR]

• Utilizing the well-designed Ni 2 CoS 4 @ZIF-67 precursor as self-sacrificing templates. • Constructing the porous α-Ni(Co)S@NiCoO 2 composites with core–shell like structure. • Novel combination of Ni-Co-S and Ni-Co-O shows outstanding capacitive performance. As inspired by the surging demand for high performance energy storage systems, researchers have been designing and exploring advanced electrode materials exhibiting higher energy and power densities. In this study, a novel combination of nickel-cobalt sulfide and oxide was reported for high performance supercapacitors. The porous α-Ni(Co)S@NiCoO 2 composites with core–shell structure were derived from the well-designed precursor with Ni 2 CoS 4 and ZIF-67 serving as the self-sacrificing templates through a two-step calcination process at elevated temperatures. Such a heterostructure exhibited an ultra-high specific capacity of 502.4 mA h g–1 at a current density of 1 A g–1, which was attributed to the unique porous core–shell structure and the ingenious combination of bimetallic sulfide and oxide. Furthermore, a hybrid supercapacitor based on the α-Ni(Co)S@NiCoO 2 composite and commercial activated carbon achieved a high energy density of 82.4 Wh kg–1 at a power density of 847.5 W kg–1. The prominent electrochemical performance exhibited by the α-Ni(Co)S@NiCoO 2 heterostructure in this study was demonstrated to be promising to practically serve as advanced electrode materials in supercapacitors. [ABSTRACT FROM AUTHOR]