Search

The escalating environmental crisis posed by single-use plastics underscores the urgent need for sustainable alternatives. This study provides an approach to introduce biodegradable polymer blends by blending synthetic polyvinyl alcohol (PVA) with natural polymers—corn starch (CS) and hydroxypropyl methylcellulose (HPMC)—to address this challenge. Through a comprehensive analysis, including of the structure, mechanical strength, water solubility, biodegradability, and thermal properties, we investigated the enhanced performance of PVA-CS and PVA-HPMC blends over conventional polymers. Scanning electron microscopy (SEM) findings of pure PVA and its blends were studied, and we found a complete homogeneity between the PVA and both types of natural polymers in the case of a high concentration of PVA, whereas at lower concentration of PVA, some granules of CS and HMPC appear in the SEM. Blending corn starch (CS) with PVA significantly boosts its biodegradability in soil environments, since adding starch of 50 w/w duplicates the rate of PVA biodegradation. Incorporating hydroxypropyl methylcellulose (HPMC) with PVA not only improves water solubility but also enhances biodegradation rates, as the addition of HPMC increases the biodegradation of pure PVA from 10 to 100% and raises the water solubility from 80 to 100%, highlighting the significant acceleration of the biodegradation process and water solubility caused by HPMC addition, making these blends suitable for a wide range of applications, from packaging and agricultural films to biomedical engineering. The thermal properties of pure PVA and its blends with natural were studied using diffraction scanning calorimetry (DSC). It is found that the glass transition temperature (Tg) increases after adding natural polymers to PVA, referring to an improvement in the molecular weight and intermolecular interactions between blend molecules. Moreover, the amorphous structure of natural polymers makes the melting temperature ™ lessen after adding natural polymer, so the blends require lower temperature to remelt and be recycled again. For the mechanical properties, both types of natural polymer decrease the tensile strength and elongation at break, which overall weakens the mechanical properties of PVA. Our findings offer a promising pathway for the development of environmentally friendly polymers that do not compromise on performance, marking a significant step forward in polymer science's contribution to sustainability. This work presents detailed experimental and theoretical insights into novel polymerization methods and the utilization of biological strategies for advanced material design. [ABSTRACT FROM AUTHOR]

The current research is devoted to the investigation of the plasticization of polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate (PHBV) with triethyl citrate (TEC). Three different PHB or PHBV-based systems with 10, 20, and 30 wt.% of TEC were prepared by two-roll milling. The effect of TEC on the rheological, thermal, mechanical, and calorimetric properties of the developed compression-molded PHB and PHBV-based systems was determined. It was revealed that the addition of TEC significantly influenced the melting behavior of both polyhydroxyalkanoates (PHA), reducing their melting temperatures and decreasing viscosities. It was also revealed that all the investigated systems demonstrated less than 2% weight loss until 200 °C and rapid degradation did not occur until 240–260 °C in an oxidative environment. Apart from this, a remarkable increase (ca 2.5 times) in ultimate tensile deformation εB was observed by increasing the amount of TEC in either PHB or PHBV. A concomitant, considerable drop in ultimate strength σB and modulus of elasticity E was observed. Comparatively, the plasticization efficiency of TEC was greater in the case of PHBV. [ABSTRACT FROM AUTHOR]

The current research is devoted to the investigation of the plasticization of polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate (PHBV) with triethyl citrate (TEC). Three different PHB or PHBV-based systems with 10, 20, and 30 wt.% of TEC were prepared by two-roll milling. The effect of TEC on the rheological, thermal, mechanical, and calorimetric properties of the developed compression-molded PHB and PHBV-based systems was determined. It was revealed that the addition of TEC significantly influenced the melting behavior of both polyhydroxyalkanoates (PHA), reducing their melting temperatures and decreasing viscosities. It was also revealed that all the investigated systems demonstrated less than 2% weight loss until 200 °C and rapid degradation did not occur until 240–260 °C in an oxidative environment. Apart from this, a remarkable increase (ca 2.5 times) in ultimate tensile deformation εB was observed by increasing the amount of TEC in either PHB or PHBV. A concomitant, considerable drop in ultimate strength σB and modulus of elasticity E was observed. Comparatively, the plasticization efficiency of TEC was greater in the case of PHBV.

Reinforcement with natural fibre has become a common place in a range of industries in the modern day. A polymer matrix can, however, boost the strength of the reinforcing element. When it comes to natural fibres and polymers, they simply do not mix because of their different hydrophobic and hydrophilic properties. However, because the polymer matrix is designed to be hydrophobic, the natural fibres are hydrophilic. This issue can now be rectified with alkalization and a silane binding agent. This technique of modifying natural fibres may result in both rise in surface roughness and a reduction in water attraction and moisture content. In this research, the effects of alkaline and silane treatment were demonstrated using mechanical testing and Fourier transform infrared spectroscopy (FTIR). DSC and TGA tests were used to assess the materials' chemical compositions and thermal properties. In comparison to other composites, those with a 2 percent silane treatment showed improved strength performance. Hemp fibre composites are expected to achieve great performance in industrial applications by enduring chemical treatment. [ABSTRACT FROM AUTHOR]

In the past few years, a new passion for the growth of biodegradable polymers based on elements derived from natural sources has been getting much attention. Natural fiber-based polymer matrix composites offer weight loss, reduction in cost and carbon dioxide emission, and recyclability. In addition, natural fiber composites have a minimal impact on the environment in regards to global warming, health, and pollution. Polylactic acid (PLA) is one of the best natural resource polymers available among biodegradable polymers. Natural fiber–reinforced PLA polymer composites have been extensively researched by polymer researchers to compete with conventional polymers. The type of fiber used plays a massive part in fiber and matrix bonds and, thereby, influences the composite's mechanical properties and thermal properties. Among the various natural fibers, low density, high strength bamboo fibers (BF) have attracted attention. PLA and bamboo fiber composites play a vital character in an extensive range of structural and non-structural applications. This review briefly discussed on currently developed PLA-based natural bamboo fiber–reinforced polymer composites concentrating on the property affiliation of fibers. PLA polymer–reinforced natural bamboo fiber used to establish composite materials, various composite fabrication methods, various pretreatment methods on fibers, their effect on mechanical properties, as well as thermal properties and applications on different fields of such composites are discussed in this study. This review also presents a summary of the issues in the fabrication of natural fiber composites. [ABSTRACT FROM AUTHOR]

Polymer biocompositions of poly(3-hydroxybutyrate) (P3HB) and linear polyurethanes (PU) with aromatic rings were produced by melt-blending at different P3HB/PU weight ratios (100/0, 95/5, 90/10, and 85/15). Polyurethanes have been prepared with 4,4′-diphenylmethane diisocyanate and polyethylene glycols with molar masses of 400 g/mol (PU400), 1000g/mol (PU1000), and 1500 g/mol (PU1500). The compatibility and morphology of the obtained polymer blends were determined by infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). The effect of the polyurethane content in the biocompositions on their thermal stability and mechanical properties was investigated and compared with those of the native P3HB. It was shown that increasing the PU content in P3HB-PU compositions to 10 wt.% leads to an improvement in the mentioned properties. The obtained results demonstrated that the thermal stability and mechanical properties of P3HB were improved, particularly in terms of increasing the degradation temperature, reducing hardness, and increasing impact strength. The best thermal and mechanical properties were shown by the P3HB-PU polymer compositions containing 10 wt.% of polyurethane modifiers, especially PU1000, which was also confirmed by the morphology analysis of these biocompositions. The presence of polyurethanes in the resulting polymer biocomposites decreases their glass transition temperatures, i.e., makes the materials more flexible. The resulting polymer biocompositions have suitable mechanical properties and thermal properties within the processing conditions for the predicted application as biodegradable, short-lived products for agriculture. [ABSTRACT FROM AUTHOR]

This study aimed to determine the effects of the ozone treatment of film-forming solutions (FFSs) containing whey protein concentrate (WPC) and gelatine on biopolymer films' physical, mechanical, and thermal properties. Film samples were produced from a FFS that was ozone-treated at 0 (control), 5, 10, and 30 min. Ozone treatment caused an increase in the pH values of the FFS, whereas the zeta potential remained negative. The films became lighter in colour, slightly greenish, and more opaque with longer ozonation times. The control sample showed the highest thermogravimetric weight loss (92.15%). The weight loss of the samples decreased with increasing ozone treatment time. The application of ozone treatment on the FFS enhanced the films' mechanical properties. Increased ozone treatment time improved the film samples' tensile strength, elongation at break, and toughness values. In conclusion, the results of this study demonstrate that the ozone treatment of FFS containing whey protein concentrate and gelatine can significantly enhance the physical, mechanical, and thermal properties of biopolymer films. These results highlight the potential of ozone treatment as a viable method for improving the performance and quality of biopolymer films used in food packaging, offering promising advantages for sustainable and environmentally friendly packaging solutions. [ABSTRACT FROM AUTHOR]

This research aimed to investigate the effects of using wood leachate (WL) powder as a cost-effective filler added to novel poly (lactic acid) biocomposites and evaluate their mechanical, thermal, morphological, and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), tensile test, Charpy impact test, Shore hardness, scanning electron microscope (SEM), differential scanning calorimetry (DSC), contact angle, and bacterial growth inhibition tests were employed to characterize the developed biocomposites. The SEM results indicated a proper filler dispersion in the polymer matrix. WL powder improved the hydrophobic nature in the adjusted sample’s contact angle experiment. Markedly, the results showed that the addition of WL filler improved the mechanical properties of the fabricated biocomposites. The thermal analysis determined the development in crystallization behavior and a decline in glass transition temperature (Tg) from 60.1 to 49.3 °C in 7% PLA-WL biocomposites. The PLA-WL biocomposites exhibited an antibacterial activity according to the inhibition zone for Escherichia coli bacteria. The developed novel PLA-WL composites can be effectively utilized in various value-added industrial applications as a sustainable and functional biopolymer material.

Due to the growing interest in biopolymers, biosynthesizable and biodegradable polymers currently occupy a special place. Unfortunately, the properties of native biopolymers make them not good enough for use as substitutes for conventional polymers. Therefore, attempts are being made to modify their properties. In this work, in order to improve the properties of the poly(3-hydroxybutyrate) (P3HB) biopolymer, linear aliphatic polyurethane (PU) based on 1,4-butanediol (BD) and hexamethylene 1,6-diisocyanate (HDI) was used. The conducted studies on the effect of the amount of PU used (5, 10, 15 and 20 m/m%) showed an improvement in the thermal properties of the prepared polymer blends. As part of the tested mechanical properties of the new polymer blends, we noted the desired increase in the tensile strength, and the impact strength showed a decrease in hardness, in particular at the presence of 5 m/m% PU. Therefore, for further improvement, hybrid nanobiocomposites with 5 m/m% PU and organically modified montmorillonite (MMT) (Cloisite 30®B) were produced. The nanoadditive was used in a typical amount of 1–3 m/m%. It was found that the obtained nanobiocomposites containing the smallest amount of nanofillers, i.e., 1 m/m% Cloisite®30B, exhibited the best mechanical and thermal properties. [ABSTRACT FROM AUTHOR]

The use of biodegradable polymers in the plastics industry has been increasing in recent years. The study of the chemical, physical, thermal, and mechanical properties of films based on biodegradable components is of interest to technologists because these properties determine their applicability for food packaging. In this work, films based on natural polymers such as linseed mucilage (LM) and chitosan (CH), as well as poly(acrylic acid) (PAA) were obtained through the casting method and using V‐50 as the initiator. The films were characterized through Fourier Transform Infrared spectroscopy, and thermogravimetric analysis, and their water absorption and swelling capacity, and thermal and mechanical properties were determined. Homogenous flexible, translucid, amber‐colored films, with low absorption and solubility in water were obtained. It was demonstrated through Fourier Transform Infrared analysis the chemical interaction between C–H, CO, and C–O chemical groups of LM, CH, and PAA. In addition, films showed high resistance to thermal decomposition between 125 and 425°C. The mechanical tests of tension allowed the composition of LM in the film, the behavior variates between a plastic and/or elastic material and with tensile strength (Rm) values between 10.8 and 16.4 MPa and elastic modulus (E) values between 56.2 and 169.2 GPa, we observed that at higher quantities of LM and thickness, both E and Rm tend to increase, while %EL decreases. This led us to conclude that the material transitioned from ductile and malleable to rigid and brittle. The films obtained with different ratios of LM/CH/PAA may exhibit a semi‐interpenetrating polymeric networking type morphology. Highlights: Thermal and mechanical properties are of interest in food packaging materials.Water absorption can impact the packaged food.Films can be processed on existing machines for conventional plastics.Some conventional plastics could be replaced by these biodegradable films.Biodegradable films are of great interest to the industry of food packaging. [ABSTRACT FROM AUTHOR]

This research aimed to investigate the effects of using wood leachate (WL) powder as a cost-effective filler added to novel poly (lactic acid) biocomposites and evaluate their mechanical, thermal, morphological, and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), tensile test, Charpy impact test, Shore hardness, scanning electron microscope (SEM), differential scanning calorimetry (DSC), contact angle, and bacterial growth inhibition tests were employed to characterize the developed biocomposites. The SEM results indicated a proper filler dispersion in the polymer matrix. WL powder improved the hydrophobic nature in the adjusted sample's contact angle experiment. Markedly, the results showed that the addition of WL filler improved the mechanical properties of the fabricated biocomposites. The thermal analysis determined the development in crystallization behavior and a decline in glass transition temperature (Tg) from 60.1 to 49.3 °C in 7% PLA-WL biocomposites. The PLA-WL biocomposites exhibited an antibacterial activity according to the inhibition zone for Escherichia coli bacteria. The developed novel PLA-WL composites can be effectively utilized in various value-added industrial applications as a sustainable and functional biopolymer material. [ABSTRACT FROM AUTHOR]

Nanocellulose fibers are widely acknowledged as a more sustainable alternative to polyimide and polyethylene terephthalate-based plastic films derived from petrochemicals. Cellulose is also utilised in packaging, tissue engineering, electronic, optical, and sensor applications, pharmaceutical applications, cosmetic applications, insulation, water filtration, and hygiene applications, as well as vascular grafts. In the present study to improve the tensile and thermal properties of cellulose nanofibers, polyethylene glycol (PEG 600) with varying concentrations was produced by solvent casting and chemically crosslinked with glutaraldehyde (GA). The effects of various PEG 600 concentrations on nanofibers and the morphology of the resulting nanofibers were investigated. The effects of GA on PEG-nanocellulose morphology, average diameter, tensile strength, elongation, and thermal characteristics were investigated. Strong (GA)-based acetal linkages are used to substitute secondary hydrogen bonds in nanocellulose films. The 1% PEG 600 plasticized nanocellulose scaffolds cross-linked with GA showed a higher tensile modulus (93 MPa) than its GA untreated nanocellulose scaffolds (69 MPa). The Young's modulus of the scaffold is increased up to 83.62 MPa. The crystallinity index values of GA-treated scaffolds were increased, and the mechanical characteristics were greatly improved, according to Fourier transform infrared (FTIR) and XRD analysis on the films. The thermogravimetric analysis (TG/DTG/DSC) of the GA treated plasticized nanocellulose scaffold showed maximum decomposition temperature (T max) at 360.01 °C. [Display omitted] • Nanocellulose fibers are extracted from the plant roots of Ixora coccinea L. • Fabricated with solvent casting process, plasticized with PEG 600, and glutaraldehyde crosslinked. • Tensile modulus of 1% PEG 600 plasticized nanocellulose scaffolds cross-linked with GA was greater (93 MPa). • The thermogravimetric analysis of the scaffold showed T max at 360.01 °C. [ABSTRACT FROM AUTHOR]

Chitosan is one of the most commonly employed natural polymers for biomedical applications. However, in order to obtain stable chitosan biomaterials with appropriate strength properties, it is necessary to subject it to crosslinking or stabilization. Composites based on chitosan and bioglass were prepared using the lyophilization method. In the experimental design, six different methods were used to obtain stable, porous chitosan/bioglass biocomposite materials. This study compared the crosslinking/stabilization of chitosan/bioglass composites with ethanol, thermal dehydration, sodium tripolyphosphate, vanillin, genipin, and sodium β-glycerophosphate. The physicochemical, mechanical, and biological properties of the obtained materials were compared. The results showed that all the selected crosslinking methods allow the production of stable, non-cytotoxic porous composites of chitosan/bioglass. The composite with genipin stood out with the best of the compared properties, taking into account biological and mechanical characteristics. The composite stabilized with ethanol is distinct in terms of its thermal properties and swelling stability, and it also promotes cell proliferation. Regarding the specific surface area, the highest value exposes the composite stabilized by the thermal dehydration method. [ABSTRACT FROM AUTHOR]

Recent years have observed a significant increase in the use of degradable materials in medicine due to their minimal impact on the patient and broad range of applicability. The biodegradable polymer Polydioxanone (PDO) provides a good example of the use of such one polymer that can represent the aforementioned medical materials in the field of medicine, due to its high level of biocompatibility and interesting mechanical properties. PDO is used to produce absorbable medical devices such as sutures and stents, and is also suitable for the fabrication of certain orthopedic implants. Polydioxanone can be processed using the injection molding method due to its thermoplastic nature; this method allows for the precise and easily-controllable production of medical materials without the need for toxic additives. A number of small commercial polymer implants have recently been introduced onto the market based on this processing method. It is important to note that, to date, no relevant information on the molding of PDO is available either for the scientific or the general public, and no study has been published that describes the potential of the injection molding of PDO. Hence, we present our research on the basic technological and material parameters that allow for the processing of PDO using the laboratory microinjection molding method. In addition to determining the basic parameters of the process, the research also focused on the study of the structural and mechanical properties of samples based on the thermal conditions during processing. A technological frame work was successfully determined for the processing of PDO via the microinjection molding approach that allows for the production of samples with the required homogeneity, shape stability and surface quality in a laboratory scale. The research revealed that PDO is a polymer with a major share of crystalline phases, and that it is sensitive to the annealing temperature profile in the mold, which has the potential to impact the final crystalline structure, the fracture morphology and the mechanical properties. [ABSTRACT FROM AUTHOR]

Medicated jellies are widely used by a large part of patients, especially by people with swallowing difficulties. Preformulation studies play an essential role in the development of new pharmaceutical formulations. The present study aimed to formulate and evaluate medicated jellies containing perphenazine, an antipsychotic drug from the group of phenothiazine compounds used to treat schizophrenia and other mental disorders. Typical gelling agents such as sodium alginate (Alg), gelatine (Gel), and pectin (Pec) were used to develop the medicated jellies. In addition to the biopolymers, components such as benzoic acid (BenzAc), citric acid (CitAc), sodium citrate (NaCit), sorbitol (Sorb) and xylitol (Xyl) were also used. Before preparing the jellies, the moist binary mixture between each component of the jelly and the active substance was analysed to investigate the compatibility of the substances. The active substance, moist binary mixture, and medicated jellies were analysed by FTIR_UATR spectroscopy, UV–Vis spectroscopy and thermogravimetry.

There is more demand for natural fiber-reinforced composites in the energy sector, and their impact on the environment is almost zero. Natural fiber has plenty of advantages, such as easy recycling and degrading property, low density, and low price. Natural fiber's thermal properties and flexural properties are less than conventional fiber. This work deals with the changes in the thermal properties and mechanical properties of S-glass reinforced with a sodium hydroxide-treated pineapple leaf (PALF) and banana stem fibers. Banana stem and pineapple leaf fibers (PALF) were used at various volume fractions, i.e., 30%, 40%, and 50%, and various fiber lengths of 20 cm, 30 cm, and 40 cm with S-glass, and their effects on the thermal and mechanical properties were studied, and their optimum values were found. It was evidenced that increasing the fiber volume and fiber length enhanced the flexural and thermal properties up to 40% of the fiber volume, and started to decrease at 50% of the fiber volume. The fiber length provides an affirmative effect on the flexural properties and a pessimistic effect on the thermal properties. The PALF S-glass combination of 40% fiber load and 40 cm fiber length provides maximum flexural strength, flexural modulus, storage modulus, and lowest loss modulus based on hybrid Taguchi grey relational optimization techniques. PALF S-glass hybrid composite has been found to have 7.80%, 3.44%, 1.17% higher flexural strength, flexural modulus, and loss modulus, respectively, and 15.74% lower storage modulus compared to banana S-glass hybrid composite. [ABSTRACT FROM AUTHOR]

Despite the fact that amino cellulose (AC) is biodegradable, biocompatible, and has excellent film-forming properties, AC films have poor mechanical properties and are not thermally stable. An AC-based composite film prepared from AC and curcumin-stearylamine based benzoxazine (C-st) is reported in order to improve its performance and promote its application. As starting materials, C-st and AC were used to produce a C-st/AC composite film possessing a synergistic property through chemical cross-linking and hydrogen bonds. Two salient features with respect to the curing behavior were obtained. Firstly, the onset of curing was reduced to 163 °C when the benzoxazine monomer was synthesized from fully bio-based precursors (such as curcumin and stearylamine). Secondly, a synergistic effect in curing behavior was obtained by mixing C-st with AC. As a result of tensile tests and thermal analysis, the poly(C-st) benefited the composite films with pronounced mechanical and thermal properties, even at elevated temperatures. There was a 2.5-fold increase in tensile strength compared to the AC film, indicating that the composite films have the potential to be used for functional purposes. These poly(C-st)/AC films with improved mechanical and thermal properties have the ability to replace naturally occurring polymer films in film-related applications. [ABSTRACT FROM AUTHOR]

In this work, the development of nanocomposite systems based on reduced graphite oxide (rGO) was combined with the development of crosslinked materials characterized by dynamic covalent bonds, i.e., a covalent associative network, starting from ad-hoc synthesized hydroxyl terminated polycaprolactone (PCL-OH). The crosslinking reaction was carried out using methylenediphenyl diisocyanate (MDI) to create systems capable of bond exchanges via transesterification and transcarbamoylation reactions, in the presence of stannous octoate as a catalyst. The above materials were prepared at two different temperatures (120 and 200 °C) and two PCL-OH:MDI ratios. FT-IR measurements proved the formation of urethane bonds in all the prepared samples. Crosslinking was demonstrated by contacting the samples with a solvent capable of dissolving the star-shaped PCL. These tests showed a significant increase in the crosslinked fraction with increasing the temperature and the PCL-OH:MDI ratio. In order to evidence the effect of crosslinking on rGO dispersion and the final properties of the material, a nanocomposite sample was also prepared using a linear commercial PCL, with the nanofiller mixed under the same conditions used to develop the crosslinked systems. The dispersion of rGO, which was investigated using FE-SEM measurements, was similar in the different systems prepared, indicating that the crosslinking process had a minor effect on the dispersibility of the nanofiller. As far as the thermal properties are concerned, the DSC measurements of the prepared samples showed that the crosslinking leads to a decrease in the crystallinity of the polymer, a phenomenon which was particularly evident in the sample prepared at 200 °C with a PCL-OH: MDI ratio of 1:1.33 and was related to the decrease in the polymer chain mobility. Moreover, rGO was found to act as a nucleating agent and increase the crystallization temperature of the nanocomposite sample based on linear commercial PCL, while the contribution of rGO in the crosslinked nanocomposite samples was minor. Rheological measurements confirmed the crosslinking of the PCL-OH system which generates a solid-like behavior depending on the PCL-OH:MDI ratio used. The presence of rGO during crosslinking generated a further huge increase in the viscosity of the melt with a remarkable solid-like behavior, confirming a strong interaction between rGO and crosslinked PCL. Finally, the prepared nanocomposites exhibited self-healing and recyclability properties, thus meeting the requirements for sustainable materials. [ABSTRACT FROM AUTHOR]

Various environmental concerns motivate scientists and researchers to look out for unique new materials in science and technology. In order to address the demand for polymeric materials with partial biodegradability, the usage of lignocellulosic fibre in the polymer matrix has risen. Lignocellulosic fibres are a cheap, easily renewable resource that is readily available in all regions. Cellulosic plant fibres also have a plethora of possibilities for use in polymer reinforcement because of their properties. Many researchers put their effort into developing a natural polymer with better mechanical properties and thermal stability using nanotechnology and the use of natural polymers to make its composites with lignocellulosic fibres. This study provides a review of the biodegradable composite market, processing methods, matrix-reinforcement phases, morphology, and characteristic improvements. In addition, it provides a concise summary of the findings of significant research on natural fibre polymer composites (NFRCs) that have been published. Indeed, a noticeably brief discussion is provided on the significant issues faced during composite extraction as well as the challenges encountered during the machining. Recent developments in the study of lignocellulosic fibre composites or NFRCs have demonstrated their enormous potential as structural elements in vehicles, aerospace structures, buildings, ballistics, soundproofing, and other structures. [ABSTRACT FROM AUTHOR]

Depletion of fossil fuels and the detrimental environmental impacts of synthetic plastics have prompted a global interest in bio-based polymers. Lignin is an abundant, unused, and low-value byproduct of pulping and biochemical operations that has the potential to decrease the need for plastics derived from petroleum. Melt blending is one of the easiest strategies for expanding the commercial applications of lignin. Concerns remain, however, regarding the negative effects of lignin on the final composite material's performance, and the increase in manufacturing costs. This study investigates the effects of blending lignin extracted from tobacco using a novel one-step processing technique on injection molding parameters, and the mechanical, physical, and thermal properties of high-density polyethylene (HDPE). By extruding HDPE pellets and lignin powder, varying blend concentrations (0, 5, 10, 15, and 30% wt.) were produced. Scanning electron microscopy (SEM) and optical microscopy were used to investigate the compatibility of the blend morphology. Results indicated that interfacial interactions were achieved as particles of tobacco lignin were well dispersed and uniformly distributed throughout HDPE. Intermolecular interactions between HDPE and lignin were also discovered through Fourier-transform infrared (FTIR) spectral analyses. The tensile test results showed that increase in lignin content up to 15% wt. had little effect on tensile strength, but at 30% wt., a 19% reduction was observed. With the addition of 5, 10, 15, and 30% wt. of lignin, the tensile modulus increased by 4%, 29%, 25%, and 8%, respectively. TGA results demonstrated that at 15% and 30% wt., tobacco lignin acted as a thermal stabilizer. The processability study revealed that tobacco lignin could be processed easily using injection molding without requiring significant changes to the process parameters. Overall, tobacco lignin showed great promise as a biodegradable HDPE filler. [ABSTRACT FROM AUTHOR]

In this work, new furan-based poly(ester amide)s of various compositions were synthesised by the melt polycondensation method. The chemical structure and composition were determined by nuclear magnetic resonance spectroscopy (1H NMR) and Fourier transform infrared (FTIR) analyses. The optical properties were studied by UV-Vis spectroscopy. The thermal properties were investigated by means of differential scanning calorimetry (DSC). The thermo-oxidative stability of PEAs was also tested. Additionally, the free volume by positron annihilation lifetime spectroscopy (PALS) technique and mechanical properties were examined. It was found that the incorporation of poly(propylene furanamide) (PPAF) units significantly affects the thermal and mechanical properties of co-polymers based on poly(hexylene 2,5-furandicarboxylate) (PHF). Depending on the composition, both semi-crystalline and amorphous co-polymers were obtained. Moreover, the values of the free volume radius (R) and the free volume fractions (fv) were strongly affected by the mole fraction of PPAF units.

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

In ongoing decades, material researchers and scientists are giving more consideration towards the improvement of biobased polymer composites as various employments of items arranged by natural fibres and petrochemical polymers prompt natural awkwardness. The goal of this review paper is to provide an intensive review and applications of the foremost appropriate commonly used biodegradable polymer composites. It is imperative to build up the completely/incompletely biodegradable polymer composites without bargaining the mechanical, physical, and thermal properties which are required for the end-use applications. This reality roused to create biocomposite with better execution alongside the least natural effect. The utilization of natural fibre-reinforced polymer composites is concerned with the mechanical properties that are highly dependent on the morphology, hydrophilic tendency, aspect ratio, and dimensional stability of the natural fibre. With this in-depth consideration of eco-friendly biocomposites, structural application materials in the infrastructure, automotive industry, and consumer applications of the following decade are attainable within the near future. [ABSTRACT FROM AUTHOR]

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This study gives an overview of the most relevant processing and performance properties of a wide selection of biobased and biodegradable plastic materials that are currently commercially available. It provides the most extensive and up-to-date scientific overview of critical properties of biobased and biodegradable plastics. Materials that are tested include fully biobased polymers (polylactic acid, polyethylene, polyamide 10,10 and a range of polyhydroxy alkanoates), partially biobased polymers (polybutylene succinate, polybutylene succinate adipate, cellulose acetate, cellulose acetate propionate, polyethylene terephthalate, polytrimethylene terephthalate, an isosorbide based polycarbonate, a thermoplastic urethane and a starch based blend) and a number of fossil-based materials (polycaprolactone, polybutylene adipate terephthalate, polyglycolic acid and polypropylene). The mechanical (tensile, flexural, impact resistance and hardness), thermal (glass transition temperature, melting temperature, melt-flow index and haul-off force) and barrier (oxygen transmission rate, water vapour transmission rate) properties of all these materials were measured and are presented in a comprehensive overview. This overview shows that the majority of functionalities that are currently being offered by fossil based polymers can be met by biobased alternatives and by biodegradable materials if this is considered to be favourable at end-of-life.

Fungal biomass (FB), a by-product of the fermentation processes produced in large volumes, is a promising biomaterial that can be incorporated into poly(lactic acid) (PLA) to develop enhanced biocomposites that fully comply with the biobased circular economy concept. The PLA/FB composites, with the addition of triethyl citrate (TEC) as a biobased plasticizer, were fabricated by a microcompounder at 150 °C followed by injection molding. The effects of FB (10 and 20 wt %) and TEC (5, 10, and 15 wt %) contents on the mechanical, thermal and surface properties of the biocomposites were analyzed by several techniques. The PLA/FB/TEC composites showed a rough surface in their fracture section. A progressive decrease in tensile strength and Young's modulus was observed with increasing FB and TEC, while elongation at break and impact strength started to increase. The neat PLA and biocomposite containing 10% FB and 15% TEC exhibited the lowest (3.84%) and highest (224%) elongation at break, respectively. For all blends containing FB, the glass transition, crystallization and melting temperatures were shifted toward lower values compared to the neat PLA. The incorporation of FB to PLA thus offers the possibility to overcome one of the main drawbacks of PLA, which is brittleness. [ABSTRACT FROM AUTHOR]

In 2021, global petroleum-based plastic production reached over 400 million metric tons (Mt), and the accumulation of these non-biodegradable plastics in the environment is a worldwide concern. Polyhydroxybutyrate (PHB) offers many advantages over traditional petroleum-based plastics, being biobased, completely biodegradable, and non-toxic. However, its production and use are still challenging due to its low deformation capacity and narrow processing window. In this work, two linear-chain polyester oligomers were used as plasticizers to improve the processability and properties of PHB. Thermal analyses, XRD, and polarized optical microscopy were performed to evaluate the plasticizing effect on the PHB and the reflection on the mechanical behavior. Both oligomers acted as PHB plasticizers, with a reduction in Tg and Tm as a function of the plasticizer concentration, which can make it easier to handle the material in thermal processing and reduce the probability of thermal degradation. Plasticizer 2 proved to be the most promising between the two with an optimized condition of 20%, in which there was a decrease in elastic modulus of up to 72% and an increase in the maximum elongation of 467%.

Poly(3−hydroxybutyrate−co−3−hydroxyhexanoate) (PHBH) films were prepared using a cast film technique. Dioxane was chosen over other polymer solvents as it resulted in homogenous films with better morphology. Several plasticizers with different molecular weights and concentrations were added to the biopolymer solution prior to casting. Thermal, crystalline, and permeability properties were analyzed by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X−ray diffraction (XRD), and both water vapor and oxygen transmission rate analysis. In general, the addition of plasticizers decreased the glass transition temperature (Tg), cold crystallization temperatures (Tcc), melting temperatures, as well as crystallinity degrees and increased the crystallite sizes and water vapor and oxygen transmission rates. The use of isosorbide and low-molecular-weight poly(ethylene glycol) (PEG) lowered the Tg around 30 °C at the highest used concentration, also being the most effective in increasing the crystallite size. When considering isosorbide and low-molecular-weight poly(ethylene glycol) (PEG) as very good plasticizers for PHBH, the question of which plasticizer to use strongly relies on the desired PHBH application.

A series of poly(ester amide)s based on dimethyl furan 2,5-dicarboxylate (DMFDC), 1,3-propanediol (PDO), 1,6-hexylene glycol (HDO), and 1,3-diaminopropane (DAP) were synthesized via two-step melt polycondensation. The phase transition temperatures and structure of the polymers were studied by differential scanning calorimetry (DSC). The positron annihilation lifetime spectroscopy (PALS) measurement was carried out to investigate the free volume. In addition, the mechanical properties of two series of poly(ester amide)s were analyzed. The increase in the number of methylene groups in the polymer backbone resulted in a decrease in the values of the transition temperatures. Depending on the number of methylene groups and the content of the poly(propylene furanamide) (PPAF), both semi-crystalline and amorphous copolymers were obtained. The free volume value increased with a greater number of methylene groups in the polymer backbone. Moreover, with a lower number of methylene groups, the value of the Young modulus and stress at break increased.

Biodegradable biopolymers such as polylactic acid and polybutylene succinate are sustainable alternatives to traditional petroleum-based plastics. However, the factors affecting their degradation must be characterized in detail to enable successful utilization. Here we compared the extruder dwell time at three different melt-spinning scales and its influence on the degradation of both polymers. The melt temperature was the same for all three processes, but the shear stress and dwell time were key differences, with the latter being the easiest to measure. Accelerated degradation tests, including quick weathering and disintegration, were used to evaluate the influence of dwell time on the structural, mechanical, and thermal properties of the resulting fibers. We found that longer dwell times accelerated degradation. Quick weathering by UV pre-exposure before the disintegration trial, however, had a more significant effect than dwell time, indicating that degradation studies with virgin material in a laboratory-scale setting only show the theoretical behavior of a product in the laboratory. A weathered fiber from an industrial-scale spinning line more accurately predicts the behavior of a product placed on the market before ending up in the environment. This highlights the importance of optimizing process parameters such as the dwell time to adapt the degradability of biopolymers for specific applications and environmental requirements. By gaining a deeper insight into the relationship between manufacturing processes and fiber degradability, products can be adapted to meet suitable performance criteria for different applications. [ABSTRACT FROM AUTHOR]

The electrospinnability of FucoPol, a bacterial exopolysaccharide, is presented for the first time, evaluated alone and in combination with other polymers, such as polyethylene oxide (PEO) and pullulan. The obtained fibers were characterized in terms of their morphological, structural and thermal properties. Pure FucoPol fibers could not be obtained due to FucoPol's low water solubility and a lack of molecular entanglements. Nanofibers were obtained via blending with PEO and pullulan. FucoPol:PEO (1:3 w/w) showed fibers with well-defined cylindrical structure, since the higher molecular weight of PEO helps the continuity of the erupted jet towards the collector, forming stable fibers. WAXS, DSC and TGA showed that FucoPol is an amorphous biopolymer, stable until 220 °C, whereas FucoPol-PEO fibers were stable until 140 °C, and FucoPol:pullulan fibers were stable until 130 °C. Interestingly, blended components influenced one another in intermolecular order, since new peaks associated to intermolecular hierarchical assemblies were seen by WAXS. These results make FucoPol-based systems viable candidates for production of nanofibers for packaging, agriculture, biomedicine, pharmacy and cosmetic applications. [ABSTRACT FROM AUTHOR]

An eco-friendly strategy for the modification of polylactic acid (PLA) surface properties, using a solvent-free process, is reported. Reactive extrusion (REX) allowed the formation of new covalent bonds between functional molecules and the PLA polymeric matrix, enhancing its mechanical properties and modifying surface hydrophobicity. To this end, the PLA backbone was modified using two alkoxysilanes, phenyltriethoxysilane and N-octyltriethoxysilane. The reactive extrusion process was carried out under mild conditions, using melting temperatures between 150 and 180 °C, 300 rpm as screw speed, and a feeding rate of 3 kg·h−1. To complete the study, flat tapes of neat and functionalized PLA were obtained through monofilament melt extrusion to quantify the enhancement of mechanical properties and hydrophobicity. The results verified that PLA modified with 3 wt% of N-octyltriethoxysilane improves mechanical and thermal properties, reaching Young's modulus values of 4.8 GPa, and PLA hydrophobic behavior, with values of water contact angle shifting from 68.6° to 82.2°. [ABSTRACT FROM AUTHOR]

Grape seeds (GS), wine lees (WL), and grape pomace (GP) are common winery by-products, used as bio-fillers in this research with two distinct biopolymer matrices—poly(butylene adipate-co-terephthalate) (PBAT) and polybutylene succinate (PBS)—to create fully bio-based composite materials. Each composite included at least 30 v% bio-filler, with a sample reaching 40 v%, as we sought to determine a composition that could be economically and environmentally effective as a substitute for a pure biopolymer matrix. The compounding process employed a twin-screw extruder followed by an injection molding procedure to fabricate the specimens. An acetylation treatment assessed the specimen's efficacy in enhancing matrix–bio-filler affinity, particularly for WL and GS. The fabricated bio-composites underwent an accurate characterization, revealing no alteration in thermal properties after compounding with bio-fillers. Moreover, hygroscopic measurements indicated increased water-affinity in bio-composites compared to neat biopolymer, most significantly with GP, which exhibited a 7-fold increase. Both tensile and dynamic mechanical tests demonstrated that bio-fillers not only preserved, but significantly enhanced, the stiffness of the neat biopolymer across all samples. In this regard, the most promising results were achieved with the PBAT and acetylated GS sample, showing a 162% relative increase in Young's modulus, and the PBS and WL sample, which exhibited the highest absolute values of Young's modulus and storage modulus, even at high temperatures. These findings underscore the scientific importance of exploring the interaction between bio-fillers derived from winery by-products and three different biopolymer matrices, showcasing their potential for sustainable material development, and advancing polymer science and bio-sourced material processing. From a practical standpoint, the study highlighted the tangible benefits of using by-product bio-fillers, including cost savings, waste reduction, and environmental advantages, thus paving the way for greener and more economically viable material production practices. [ABSTRACT FROM AUTHOR]

Environmental pollution caused by petroleum-derived plastics continues to increase annually. Consequently, current research is interested in the search for eco-friendly bacterial polymers. The importance of Bacillus bacteria as producers of polyhydroxyalkanoates (PHAs) has been recognized because of their physiological and genetic qualities. In this study, twenty strains of Bacillus genus PHA producers were isolated. Production was initially evaluated qualitatively to screen the strains, and subsequently, the strain B12 or Bacillus sp. 12GS, with the highest production, was selected through liquid fermentation. Biochemical and molecular identification revealed it as a novel isolate of Bacillus cereus. Production optimization was carried out using the Taguchi methodology, determining the optimal parameters as 30 °C, pH 8, 150 rpm, and 4% inoculum, resulting in 87% and 1.91 g/L of polyhydroxybutyrate (PHB). Kinetic studies demonstrated a higher production within 48 h. The produced biopolymer was analyzed using Fourier-transform infrared spectroscopy (FTIR), confirming the production of short-chain-length (scl) polyhydroxyalkanoate, named PHB, and differential scanning calorimetry (DSC) analysis revealed thermal properties, making it a promising material for various applications. The novel B. cereus isolate exhibited a high %PHB, emphasizing the importance of bioprospecting, study, and characterization for strains with biotechnological potential. [ABSTRACT FROM AUTHOR]

Due to the extensive application of petroleum-based plastics as packaging materials and problems related to their degradation/recycling, developing new solutions in the field of novel biopolymer-based materials has become imperative. Natural substitutes for synthetic polymers (starch, cellulose, chitosan) require modifications that enable their processing and provide them with additional properties (i.e., mechanical strength, controlled biodeterioration, antimicrobial and antioxidative activity). The antioxidant activity of natural packaging materials still requires further investigation. In this research paper, novel materials used for packaging perishable food susceptible to oxidizing agents were designed from potato starch (NS) reinforced with antioxidants such as dialdehyde starch (DS) and caffeic acid (CA)/quinic acid (QA). The use of spectroscopic techniques (ATR-FTIR, Raman) and X-ray diffraction allowed the examination of the chemical structure and arrangement of the blend and confirmed the component interactions. The film surface was examined by AFM. DS, functioning as a cross-linker, enhanced the film barrier as well as the mechanical and thermal properties, and it promoted starch amorphization when blended with other antioxidants. The antioxidant activity of caffeic acid was greater than that of quinic acid. Dialdehyde starch improves elasticity, whereas acids (particularly caffeic acid) influence film stiffness. A high susceptibility to biodegradation is valuable for potential eco-friendly packaging applications. [ABSTRACT FROM AUTHOR]

Fly ash (FA), a by‐product of the power generation industry, can potentially be used as a filler in polymer products. Particularly, FA has been investigated as an alternative filler to partially or fully replace commercial fillers in polymer composites. This mini‐review discusses the fundamental properties of FA, environmental pollution from commercial fillers, and the performance of FA in polymers. The properties of FA‐loaded polymer composites are discussed, including the morphological, rheological, mechanical, and thermal properties. This review highlights the potential methods and challenges for substituting, or replacing, commercial fillers in various polymers such as natural rubber (NR), epoxidized NR, epoxy, styrene‐butadiene rubber (SBR), NR/SBR blends, polyethylene, polypropylene, and polyester. [ABSTRACT FROM AUTHOR]

Industry-sponsored research has intensified to find suitable substitutes for synthetic polymers. For this purpose, biopolymers are promising materials that are extracted from renewable resources. However, there are areas of concern (biopolymers are mostly brittle in the dry state) that require further research before they are used in advanced applications. To overcome this, plasticizers are often added to biopolymers to enhance their physicochemical properties. In this study, chitosan (CH)-glycerol (GL)-based polymeric films were prepared by a simple drop-casting technique, and the influence of a plasticizer (GL) on the properties of chitosan films was analyzed. Additionally, the as-prepared samples were irradiated with γ-rays (60Co γ rays with a dose of 102 kGy) to study the effect of γ-irradiation on the properties of polymeric composites. To achieve this, different samples were prepared by varying the amount of GL. FT-IR analysis revealed the interruption of hydrogen bonding in chitosan by the incorporation of GL. This led to the chain-spreading of CH, which ultimately increased the flexibility of the composite films (CH-GL). The DSC of the CH film showed two peaks: one endothermic peak below 100 °C (due to water vapor) and a second exothermic peak that appeared between 130 and 360 °C (degradation of the amino group). Plasticization of CH films with GL was confirmed by DSC, where the exothermic degradation was converted into an endothermic peak. Depending upon the amount of GL, γ-irradiation considerably affected the chemical structure of CH by breaking the carbohydrate and pyranose rings; this led to a decrease in the crystallinity of the composite films. The changes studied in the DSC and TGA analysis complemented each other. γ-irradiation also affected the morphology of the films, which changed from smooth and homogeneous to roasted structures, with random swelling on the surface of the films. This swelling reflected the degradation of the surfaces into thin layers. Considering the changes that occurred in the films post-γ-irradiation, it can be inferred that the irradiation dose of 102 kGy is sufficient to degrade as-prepared biopolymer composites. [ABSTRACT FROM AUTHOR]

Biodegradable polymer nanocomposites (BPNCs) are advanced materials that have gained significant attention over the past 20 years due to their advantages over conventional polymers. BPNCs are eco-friendly, cost-effective, contamination-resistant, and tailorable for specific applications. Nevertheless, their usage is limited due to their unsatisfactory physical and mechanical properties. To improve these properties, nanofillers are incorporated into natural polymer matrices, to enhance mechanical durability, biodegradability, electrical conductivity, dielectric, and thermal properties. Despite the significant advances in the development of BPNCs over the last decades, our understanding of their dielectric, thermal, and electrical conductivity is still far from complete. This review paper aims to provide comprehensive insights into the fundamental principles behind these properties, the main synthesis, and characterization methods, and their functionality and performance. Moreover, the role of nanofillers in strength, permeability, thermal stability, biodegradability, heat transport, and electrical conductivity is discussed. Additionally, the paper explores the applications, challenges, and opportunities of BPNCs for electronic devices, thermal management, and food packaging. Finally, this paper highlights the benefits of BPNCs as biodegradable and biodecomposable functional materials to replace traditional plastics. Finally, the contemporary industrial advances based on an overview of the main stakeholders and recently commercialized products are addressed. [ABSTRACT FROM AUTHOR]

Bacterial cellulose (BC) is a highly pure polysaccharide biopolymer that can be produced by various bacterial genera. Even though BC lacks functional properties, its porosity, three-dimensional network, and high specific surface area make it a suitable carrier for functional composite materials. In the present study, BC-producing bacteria were isolated from kombucha beverage and identified using a molecular method. Two sets of the BC hydrogels were produced in static conditions after four and seven days. Afterwards, two different synthesis pathways were applied for BC functionalization. The first method implied the incorporation of previously synthesized HAp/TiO2 nanocomposite using an immersion technique, while the second method included the functionalization of BC during the synthesis of HAp/TiO2 nanocomposite in the reaction mixture. The primary goal was to find the best method to obtain the functionalized material. Physicochemical and microstructural properties were analyzed by SEM, EDS, FTIR, and XRD methods. Further properties were examined by tensile test and thermogravimetric analysis, and antimicrobial activity was assessed by a total plate count assay. The results showed that HAp/TiO2 was successfully incorporated into the produced BC hydrogels using both methods. The applied methods of incorporation influenced the differences in morphology, phase distribution, mechanical and thermal properties, and antimicrobial activity against Staphylococcus aureus (ATCC 25923), Escherichia coli (ATCC 25922), Proteus mirabilis (ATCC 12453), and Candida albicans (ATCC 10231). Composite material can be recommended for further development and application in environments that are suitable for diseases spreading. [ABSTRACT FROM AUTHOR]

New advances in materials science and medicine have enabled the development of new and increasingly sophisticated biomaterials. One of the most widely used biopolymers is polycaprolactone (PCL) because it has properties suitable for biomedical applications, tissue engineering scaffolds, or drug delivery systems. However, PCL scaffolds do not have adequate bioactivity, and therefore, alternatives have been studied, such as mixing PCL with bioactive polymers such as gelatin, to promote cell growth. Thus, this work will deal with the fabrication of nanofiber membranes by means of the electrospinning technique using PCL-based solutions (12 wt.% and 20 wt.%) and PCL with gelatin (12 wt.% and 8 wt.%, respectively). Formic acid and acetic acid, as well as mixtures of both in different proportions, have been used to prepare the preliminary solutions, thus supporting the electrospinning process by controlling the viscosity of the solutions and, therefore, the size and uniformity of the fibers. The physical properties of the solutions and the morphological, mechanical, and thermal properties of the membranes were evaluated. Results demonstrate that it is possible to achieve the determined properties of the samples with an appropriate selection of polymer concentrations as well as solvents. [ABSTRACT FROM AUTHOR]

The development of new sustainable material solutions in the processing of thermoplastic polymers concerns both the application of biopolymers and the use of valorized plant derivatives as fillers and modifiers of petrochemical polymers. Herein, the possibility of using unprocessed raw parts of two commonly used in the food industry leaves, i.e., lemon (LL) and stevia (ST), as active and functional fillers for high-density polyethylene (HDPE) has been verified. The series of composites containing 1, 2, and 5 wt% of ground leaves produced in the melt-mixing process were analyzed for thermal properties (DSC and TGA), and the antioxidant potential of the fillers was evaluated. Verifying the active effect of the ground leaves on the resistance to oxidation in the molten state was carried out by oxygen induction time (OIT by DSC) analysis and oscillatory rheology under steady-state shear conditions combined with spectroscopic (FTIR) carbonyl index (CI) analysis. Studies have shown that the introduction of 5 wt% of both types of leaves allows for a significant increase in the melt oxidation resistance (above 2 times longer OIT concerning HDPE, ~ 35 min) of composites without substantial changes in their crystalline structure and thermal stability. Determined after the long-term rheological measurements in an oxidative atmosphere CI showed 70 and 82% lower values for 5 wt% LL and ST composites compared to unmodified polyethylene. [ABSTRACT FROM AUTHOR]

This work aimed to evaluate the impact of adding two essential oils (EO) from lemongrass (LEO) and Tahiti lime (TLEO) on the physical, mechanical, and thermal properties of chitosan-based biodegradable films. Six film formulations were prepared: two controls with chitosan concentrations of 1% and 1.5% v/w, two formulations combining the two chitosan concentrations with 1% LEO v/v, and two formulations combining the two chitosan concentrations with 1% TLEO v/v. The films' morphological, water affinity, barrier, mechanical, and thermal properties were evaluated. The films' surface showed a heterogeneous morphology without cracks, whereas the cross-section showed a porous-like structure. Adding EO to the films promoted a 35–50% decrease in crystallinity, which was associated with an increase in the elasticity (16–35%) and a decrease in the tensile strength (9.3–29.2 MPa) and Young's modulus (190–1555 MPa) on the films. Regarding the optical properties, the opacity of the films with TLEO increased up to 500% and 439% for chitosan concentrations of 1% and 1.5%, respectively. While the increase in opacity for the films prepared with LEO was 357% and 187%, the reduction in crystallinity also reduced the resistance of the films to thermal processes, which could be explained by the reduction in the enthalpy of fusion. The thermal degradation of the films using TLEO was higher than those where LEO was used. These results were indicative of the great potential of using TLEO and LEO in biodegradable films. Likewise, this work showed an alternative for adding value to the cultivation of Tahiti lime due to the use of its residues, which is in accordance with the circular economy model. However, it was necessary to deepen the study and the use of these essential oils in the preparation of biodegradable films. [ABSTRACT FROM AUTHOR]

Biocomposites comprising a combination of natural fibres and bio-based polymers are good alternatives to those produced from synthetic components in terms of sustainability and environmental issues. However, it is well known that water or aqueous chemical solutions affect natural polymers/fibres more than the respective synthetic components. In this study the effects of water, salt water, acidic and alkali solutions ageing on water uptake, mechanical properties and flammability of natural fibre-reinforced polypropylene (PP) and poly(lactic acid) (PLA) composites were compared. Jute, sisal and wool fibre- reinforced PP and PLA composites were prepared using a novel, patented nonwoven technology followed by the hot press method. The prepared composites were aged in water and chemical solutions for up to 3 week periods. Water absorption, flexural properties and the thermal and flammability performances of the composites were investigated before and after ageing each process. The effect of post-ageing drying on the retention of mechanical and flammability properties has also been studied. A linear relationship between irreversible flexural modulus reduction and water adsorption/desorption was observed. The aqueous chemical solutions caused further but minor effects in terms of moisture sorption and flexural modulus changes. PLA composites were affected more than the respective PP composites, because of their hydrolytic sensitivity. From thermal analytical results, these changes in PP composites could be attributed to ageing effects on fibres, whereas in PLA composite changes related to both those of fibres present and of the polymer. Ageing however, had no adverse effect on the flammability of the composites. [ABSTRACT FROM AUTHOR]