Search

[Display omitted] • ZnCl 2 -activated biochar from sludge successfully adsorbed total NAs in raw OSPW. • Pore filling, hydrogen bonding, and π − π interactions were the adsorption mechanisms. • Biochar had selectivity for NAs with hydrophobic and higher cyclicity characteristics. • Microtox® assay indicated 66% reduction in acute toxicity after biochar treatment. • 91% reduction of bioavailability of organics was observed in OSPW treated with sludge biochar. Large volumes of oil sands process water (OSPW) containing naphthenic acids (NAs) and other contaminants are generated by oil sands operations. For the first time, pristine and zinc chloride-activated biochars from sludge from a municipal wastewater treatment plant are studied in the adsorption of NAs in real OSPW. By using activated biochar instead of pristine biochar, the adsorption capacity (q t) for total NAs (classical and oxidized NAs) increased from 2.3 to 26.6 mg/g. The increase in q t for activated biochar was related to the improvement of surface area from 7.9 to 513 m2/g, the abundance of mesopores (89% of pore volume), and the oxygen-containing surface groups. Equilibrium was reached at 2 h of contact time. Considering the thousands of structures of NAs in the OSPW, the activated biochar presented higher affinity for NAs with higher carbon and double bond equivalency numbers, therefore, NAs with more hydrophobic and higher cyclicity characteristics. Pore-filling, hydrogen bonding, and π-π interactions are the adsorption mechanisms. Thermal regeneration of spent activated biochar was studied, and in the fifth cycle of regeneration, the regenerated biochar had q t of 7.1 mg/g, which was 5 times higher than the adsorption capacity of fresh pristine biochar. Adsorption treatment of OSPW using activated biochar decreased the following parameters: metals Mg (7%), Ca (21%), Sr (27%), and Ba (60%), organic matter by means of DOC (63%) and COD (66%), acute toxicity towards V. fischeri (66%) and bioavailability of organics (91%). These findings promote circular economy as it presents an efficient adsorbent for NAs in OSPW developed from sludge, reducing the environmental impact associated with sludge disposal and allowing the efficient reclamation and reuse of OSPW. [ABSTRACT FROM AUTHOR]

Large amounts of process water with considerable concentrations of recalcitrant organic contaminants, such as polycyclic aromatic hydrocarbon (PAHs), phenolic compounds (PCs), and benzene, toluene, ethylbenzene, and xylene (BTEX), are generated by several segments of oil and gas industries. These segments include refineries, hydraulic fracturing (HF), and produced waters from the extraction of shale gas (SGPW), coalbed methane (CBMPW) and oil sands (OSPW). In fact, the concentration of PCs and PAHs in process water from refinery can reach 855 and 742 mg L−1, respectively. SGPW can contain BTEX at concentrations as high as 778 mg L−1. Adsorption can effectively target those organic compounds for the remediation of the process water by applying carbon-based adsorbents generated from organic feedstocks. Such organic feedstocks usually come from organic waste materials that would otherwise be conventionally disposed of. The objective of this review paper is to cover the scientific progress in the studies of carbon-based adsorbents from organic feedstocks that were successfully applied for the removal of organic contaminants PAHs, PCs, and BTEX. The contributions of this review paper include the important aspects of (i) production and characterization of carbon-based adsorbents to enhance the efficiency of organic contaminant adsorption, (ii) adsorption properties and mechanisms associated with the engineered adsorbent and expected for certain pollutants, and (iii) research gaps in the field, which could be a guidance for future studies. In terms of production and characterization of materials, standalone pyrolysis or hybrid procedures (pyrolysis associated with chemical activation methods) are the most applied techniques, yielding high surface area and other surface properties that are crucial to the adsorption of organic contaminants. The adsorption of organic compounds on carbonaceous materials performed well at wide range of pH and temperatures and this is desirable considering the pH of process waters. The mechanisms are frequently pore filling, hydrogen bonding, π−π, hydrophobic and electrostatic interactions, and same precursor material can present more than one adsorption mechanism, which can be beneficial to target more than one organic contaminant. Research gaps include the evaluation of engineered adsorbents in terms of competitive adsorption, application of adsorbents in oil and gas industry process water, adsorbent regeneration and reuse studies, and pilot or full-scale applications. [Display omitted] • Organic contaminants are a concern in process water (PW) from oil and gas operations. • Scientific progress in carbon-based adsorbents for organic contaminants is covered. • Adsorption efficiency is enhanced with production conditions of carbon-based material. • Future study must focus on real PW to assess adsorption efficiency and competitivity • Research gaps include regeneration/reuse and environmental impacts of spent adsorbent. [ABSTRACT FROM AUTHOR]

[Display omitted] • BC/ZnO composites were successfully synthesized from wood wastes. • The BC/30 %ZnO composite showed enhanced photocatalytic performance than pure ZnO. • The composite presented good reusability and stability after 4 cycles of use. • First study applied BC/ZnO composite for NAs mixture photocatalytic degradation. • Over 95 % of NAs in mixture were degraded by BC/30 %ZnO after 6 h solar irradiation. Naphthenic acids (NAs) present in oil sands process water (OSPW) have brought increasing environmental concerns due to their potential risk to aquatic and mammalian species. In this study, sustainable biochar zinc oxide (BC/ZnO) composites were synthesized using wood waste with different ZnO content and applied under simulated solar light for the photocatalytic degradation of different NAs for the first time. The best experimental conditions were determined as 0.5 g/L BC/30%ZnO and 4 h of simulated solar irradiation time, achieving 93.7 % degradation of cyclohexanecarboxylic acid (CHA) following the pseudo-first order kinetics. BC, with a porous structure and roughened surface, acted as an excellent platform for ZnO particles and an electron reservoir to inhibit the recombination of photogenerated electron-hole pairs. Hydroxyl radicals (•OH) were identified to play the dominant role in CHA degradation, and the enhanced photocatalytic performance of the BC/30%ZnO composite was proved by more •OH species detected compared to synthesized ZnO. The composite showed good reusability and stability after 4 successive cycles of use, still achieving 92.9 % degradation of CHA. Moreover, this is the first study applying BC/30%ZnO composite for the simultaneous degradation of a complex mixture of eight NAs with significantly different chemical structures. The competition kinetics were observed among different NAs in the mixture, resulted in over 95 % degradation of total NAs after 6 h treatment. By applying wood waste-based BC/ZnO composite with excellent photocatalytic performance in combination with solar light as green energy source, this research highlights a promising sustainable approach for real OSPW remediation. [ABSTRACT FROM AUTHOR]