Search

Medieval paper, a handmade product, is made with a mould which leaves an indelible imprint on the sheet of paper. This imprint includes chain lines, laid lines and watermarks which are often visible on the sheet. Extracting these features allows the identification of the paper stock and gives information about the chronology, localisation and movement of manuscripts and people. Most computational work for feature extraction of paper analysis has so far focused on radiography or transmitted light images. While these imaging methods provide clear visualisation of the features of interest, they are expensive and time consuming in their acquisition and not feasible for smaller institutions. However, reflected light images of medieval paper manuscripts are abundant and possibly cheaper in their acquisition. In this paper, we propose algorithms to detect and extract the laid and chain lines from reflected light images. We tackle the main drawback of reflected light images, that is, the low contrast attenuation of chain and laid lines and intensity jumps due to noise and degradation, by employing the spectral total variation decomposition and develop methods for subsequent chain and laid line extraction. Our results clearly demonstrate the feasibility of using reflected light images in paper analysis. This work enables feature extraction for paper manuscripts that have otherwise not been analysed due to a lack of appropriate images. We also open the door for paper stock identification at scale. [ABSTRACT FROM AUTHOR]

In 3D building models, a large number of texture maps with different sizes increase the number of model data loading and drawing batches, which greatly reduces the drawing efficiency of the model. Therefore, this paper proposes a texture set mapping method based on vertex importance. Firstly, based on the 2D space boxing algorithm, the texture maps are merged and a series of Mipmap texture maps are generated, and then the vertex curvature, texture variability and location information of each vertex are calculated, normalized, and weighted to get the importance of each vertex, and then finally, different Mipmap-level textures are remapped according to the importance of the vertices. The experiment proves that the algorithm in this paper can reduce the amount of texture data on the one hand, and avoid the rendering pressure brought by the still large amount of data after merging on the other hand, so as to improve the rendering efficiency of the model. [ABSTRACT FROM AUTHOR]

In view of the low identification accuracy of the crack-detection technology of asphalt pavement under the current conditions of complex pavement (subject to strong light, water on the road, debris, and so on), an asphalt pavement crack-detection algorithm based on improved YOLOv5s was proposed by building the data set for asphalt pavement cracks. The first step was to make the following improvements to the original YOLOv5s model according to the characteristics of the asphalt pavement crack data set: The k -means++ algorithm was used to recluster the anchor points of the crack data set, and the initial anchor frame matching the crack characteristics of the asphalt pavement was obtained to replace the default initial anchor frame in the YOLOv5 original model. In the prediction part of the original model, the Convolutional Block Attention Module (CBAM) was added in the order of first channel and then space to improve the detection ability of the model to small cracks. The CIoU_Loss function was used as the regression loss function of the model to replace the GIoU_Loss function in the original model to improve the positioning accuracy of the anchor frame. The second step was to perform an ablation experiment on the improved YOLOv5s model. This would prove that each improvement scheme could increase detection ability without conflict. The final step was to compare the improved YOLOv5s model with various classic target detection models in the data set of this paper: the Crack Forest Data set (CFD), the Crack500 data set, and the Crack200 data set. The results showed that the detection of the improved YOLOv5s model on each data set was better than other target detection models. The mAP@0.5 and mAP@[0.5:0.95] of this model on the data set of this paper were 90.58% and 56.08%, respectively, which were much higher than other target detection models. These findings indicate that the improved YOLOv5s model had better detection under complex pavement conditions and could provide a theoretical basis for the automatic detection of asphalt pavement cracks. [ABSTRACT FROM AUTHOR]

Most Penman-Monteith-Leuning (PML) evapotranspiration (ET) modeling studies are dominated by consideration of meteorological, energy, and land use information, etc., but the dynamic coupling of soil moisture content (SM), especially in terms of improving accuracy through assimilation, lacks sufficient attention. This paper proposes a research framework for the dynamic coupling simulation of PML model and SM based on data assimilation, i.e., the remote sensing monitored SM is combined with soil evaporation of PML to obtain high-precision time-continuous SM data through data assimilation; simultaneously, dynamical soil evaporation coefficients are generated based on the assimilated SM to improve the simulation accuracy of the PML model. The new scheme was validated at a typical irrigation zone in north China and showed obvious improvements in both SM and ET simulations. Moreover, the effect of the assimilation of SM on the simulation accuracy of ET for different crop growth periods is further analyzed. This research provides a new idea for the coupling simulation of the SM and PML models. [ABSTRACT FROM AUTHOR]

In this Perspective paper we explore the potential of integrating radiological imaging with other data types, a critical yet underdeveloped area in comparison to the fusion of other multi-omic data. Radiological images provide a comprehensive, three-dimensional view of cancer, capturing features that would be missed by biopsies or other data modalities. This paper explores the complexities and challenges of incorporating medical imaging into data integration models, in the context of precision oncology. We present the different categories of imaging-omics integration and discuss recent progress, highlighting the opportunities that arise from bringing together spatial data on different scales. [ABSTRACT FROM AUTHOR]

Simple Summary: This paper argues the importance of considering domain knowledge when dealing with missing data in healthcare. We identify fundamental missingness scenarios in healthcare facilities and show how they impact the missing data analysis methods. Despite the extensive literature on missing data theory and cautionary articles emphasizing the importance of realistic analysis for healthcare data, a critical gap persists in incorporating domain knowledge into the missing data methods. In this paper, we argue that the remedy is to identify the key scenarios that lead to data missingness and investigate their theoretical implications. Based on this proposal, we first introduce an analysis framework where we investigate how different observation agents, such as physicians, influence the data availability and then scrutinize each scenario with respect to the steps in the missing data analysis. We apply this framework to the case study of observational data in healthcare facilities. We identify ten fundamental missingness scenarios and show how they influence the identification step for missing data graphical models, inverse probability weighting estimation, and exponential tilting sensitivity analysis. To emphasize how domain-informed analysis can improve method reliability, we conduct simulation studies under the influence of various missingness scenarios. We compare the results of three common methods in medical data analysis: complete-case analysis, Missforest imputation, and inverse probability weighting estimation. The experiments are conducted for two objectives: variable mean estimation and classification accuracy. We advocate for our analysis approach as a reference for the observational health data analysis. Beyond that, we also posit that the proposed analysis framework is applicable to other medical domains. [ABSTRACT FROM AUTHOR]

The study attempts to analyze research publications of Central University of Gujarat (CUG) during the period of 2010 - 2020. The bibliographic data for this study was extracted from the Scopus database. This paper analyses 771 research papers published by Central University of Gujarat during the period under the study. The study examine the year-wise research publications, authorship pattern, degree of collaboration, types of document, preferred journals for publication, prolific author, h-index, most collaborating institutions and countries etc. Additionally, in this research paper different software used e.g. 'MS-Excel', 'bibliometrix' & 'biblioshiny' of R-Package, VOSviwer applied for the analysis and data visualizations. The research findings indicate that the growth of literature pattern is linear, and journals articles (561) are the most preferred form of publications by the researchers to communicate their research. Degree of Collaboration (DC) 0.728 indicates that the most research work jointly carried out by research scholars of Central University of Gujarat (CUG). Singh M. is found to be the most prolific author and the Journal of Molecular Liquids is the most preferred Journal. The top 10 most cited publications were used from that only one paper was two-authored and received highest 439 citations found and other 9 research papers were shown multiple-authored. In Jawaharlal Nehru University (60) and Banasthali Vidyapith (39) were the leading collaborating Institutions. The USA, Australia, South Africa, UK, and Canada were the top five most collaborative countries. The subject Chemistry was most prominent research area during the study period. The CUG has to make more effort to promote research and develop quality culture, attention of developing better policies to enhance and enrich the research performance. [ABSTRACT FROM AUTHOR]

This paper proposes a profit maximization model for a data consumer when it buys personal data from data providers (by obtaining consent) through data brokers and provides their new services to data providers (i.e., service consumers). To observe the behavioral models of data providers, the data consumer, and service consumers, this paper proposes the willingness-to-sell model of personal data of data providers (which is affected by data providers' behavior related to explicit consent), the service quality model obtained by the collected personal data from the data consumer's perspective, and the willingness-to-pay model of service consumers regarding provided new services from the data consumer. Particularly, this paper jointly considers the behavior of data providers and service users under a limited budget. With parameters inspired by real-world surveys on data providers, this paper shows various numerical results to check the feasibility of the proposed models. [ABSTRACT FROM AUTHOR]

Traditional machine learning-based entity extraction methods rely heavily on feature engineering by experts, and the generalization ability of the model is poor. Prototype networks, on the other hand, can effectively use a small amount of labeled data to train models while using category prototypes to enhance the generalization ability of the models. Therefore, this paper proposes a prototype network-based named entity recognition (NER) method, namely the FSPN-NER model, to solve the problem of difficult recognition of sensitive data in data-sparse text. The model utilizes the positional coding model (PCM) to pre-train the data and perform feature extraction, then computes the prototype vectors to achieve entity matching, and finally introduces a boundary detection module to enhance the performance of the prototype network in the named entity recognition task. The model in this paper is compared with LSTM, BiLSTM, CRF, Transformer and their combination models, and the experimental results on the test dataset show that the model outperforms the comparative models with an accuracy of 84.8%, a recall of 85.8% and an F1 value of 0.853. [ABSTRACT FROM AUTHOR]

Introduction: Behaviourally informed soft policies, such as nudges, have become popular in areas like health, environment, and energy use as cost-effective instruments to change behaviour and decision-making. However, the effectiveness of soft policies in the transport sector is modest at best. One reason for this relative ineffectiveness might be their one-size-fits-all nature, and personalizing soft interventions has been suggested to increase their effectiveness. The Trans-theoretical Model (TTM) suggests that people progress through five stages of behavioural change, from pre-contemplating a behaviour to maintaining the behaviour, and behavioural interventions could be designed for specific stages. However, it is not always feasible to conduct surveys to place people at different stages of the TTM. Methods: This paper explores whether it is possible to use multimodality data taken from a travel diary to place people at different stages of the TTM. The analysis uses an existing dataset from 826 respondents that includes self-reported TTM stages regarding cycling and data on multimodality. In the analysis, the multimodality data are used to allocate respondents to categories and assign them to TTM stages. The performances of the stage assignment approaches are evaluated using the self-reported TTM data and confusion matrices. Findings: The accuracy of the allocation of participants to TTM stages using multimodality data is approximately 75%. The accuracy is higher for early stages (pre-contemplation) and later stages (maintenance) of the TTM. A data-driven approach to dealing with multimodality data performs slightly better than an approach that relies on pre-defined categorization. Conclusion: The paper suggests that it will be possible in the future to personalise behavioural interventions according to the stages of the TTM even in the absence of self-reported survey data that classifies people to TTM stages if objective multimodality data are available. [ABSTRACT FROM AUTHOR]

This paper employs the instrumental variable method and the intermediary model to explore the influence of monocentric and polycentric spatial structures of innovation agglomeration on energy efficiency. This paper uses data from 2010 to 2021 in China, and also panel data regression models were used. The findings indicate that the monocentric spatial structure of provincial system innovation agglomeration is primarily concentrated in northeastern and western regions of China, whereas the polycentric spatial structure is mainly distributed in eastern coastal areas. A monocentric spatial structure inhibits the enhancement of energy efficiency, but there is an environmental paradox of excessive resource agglomeration. In contrast, a polycentric spatial structure and its strengthening tendency facilitate the improvement of energy efficiency. A monocentric spatial structure has an inhibitory impact on the improvement of energy efficiency in the three sectors of agriculture, industry, and construction, while a polycentric spatial structure aids it. A monocentric spatial structure further hinders the improvement of energy efficiency by impeding the upgrading of the industrial structure, while the upgrading of the industrial structure driven by the polycentric spatial structure plays a role in enhancing energy efficiency. The policy recommendations of this paper are intended to help coordinate the pace of innovation development between cities, adjust the spatial structure of innovation agglomeration between regions, and promote the upgrading of the comprehensive industrial structure, thereby improving overall energy efficiency. [ABSTRACT FROM AUTHOR]

Understanding electrical load profiles and detecting anomaly behaviors are important to the smart grid system. However, current load identification and anomaly analysis are based on static analysis, and less consideration is given to anomaly findings under load change conditions. This paper proposes a deep variational autoencoder network (DVAE) for load profiles, along with anomaly analysis services, and introduces auto-time series data updating strategies based on sliding window adjustment. DVAE can help reconstruct the load curve and measure the difference between the original and the newer curve, whose measurement indicators include reconstruction probability and Pearson similarity. Meanwhile, the design of the sliding window strategy updates the data and DVAE model in a time-series manner. Experiments were carried out based on datasets from the U.S. Department of Energy and from Southeast China. The results showed that the proposed services could result in a 5% improvement in the AUC value, which helps to identify the anomaly behavior. [ABSTRACT FROM AUTHOR]

This paper presents a methodology for fault detection and isolation (FDI) in transient conditions using a multiway principal component analysis (MPCA) approach where practical data have been augmented with simulated data to conduct FDI when there are insufficient practical data. The motivation for using a heated two-tank system is due to the fact that it resembles a basic process in terms of controllable variables, noise, disturbances, and changes in operating points. Normal and faulty condition data of the practical heated two-tank system as well as a Simulink® model of the heated two-tank system were used. The MPCA technique has enhanced ability to detect and isolate faults in transient conditions compared to classic principal component analysis (PCA). MPCA, however, requires a vast amount of normal process transient conditions data to train the model to then enable meaningful fault detection and isolation. In this study, the practical normal transient conditions data are augmented with simulated normal transient conditions data to meet the requirement of a large amount of data. Utilising different datasets for the training of the MPCA model, the fault detection and isolation performance was evaluated with various metrics. This paper presents positive results towards the implementation of MPCA for fault detection in transient conditions. [ABSTRACT FROM AUTHOR]

One of the major challenges that existing spatial data is facing is the fragmentation of its representation of indoor and outdoor space. As studies in the use of omnidirectional images in representing space and providing Location-based Services (LBS) has been increasing, the representation of the different scales of space, both in indoors and outdoors, has yet to be addressed. This study aims to develop a data model for generating a multi-scale image-based representation of space using omnidirectional images based spatial relationships. This paper identifies the different scales of space that are represented in spatial data and extends previous approaches of using omnidirectional images in providing indoor LBS towards representing the other scales of space, particularly in outdoor space. Using a sample data, we present an experimental implementation to demonstrate the potential of the proposed data model. Results show that apart from the realistic visualization that image data provides, basic spatial functions can be performed on the image data constructed based on the proposed data model. [ABSTRACT FROM AUTHOR]

The meta-learning method proposed in this paper addresses the issue of small-sample regression in the application of engineering data analysis, which is a highly promising direction for research. By integrating traditional regression models with optimization-based data augmentation from meta-learning, the proposed deep neural network demonstrates excellent performance in optimizing glass fiber reinforced plastic (GFRP) for wrapping concrete short columns. When compared with traditional regression models, such as Support Vector Regression (SVR), Gaussian Process Regression (GPR), and Radial Basis Function Neural Networks (RBFNN), the meta-learning method proposed here performs better in modeling small data samples. The success of this approach illustrates the potential of deep learning in dealing with limited amounts of data, offering new opportunities in the field of material data analysis. [ABSTRACT FROM AUTHOR]

Applying a parametric approach, in this paper we studied a new class of multidimensional extremization models with data uncertainty. Concretely, first, we derived the robust conditions of necessary optimality. Thereafter, we established robust sufficient optimality conditions by employing the various forms of convexity of the considered functionals. In addition, we formulated an illustrative example to validate the theoretical results. [ABSTRACT FROM AUTHOR]

In this paper, a fractional active disturbance rejection control (FADRC) scheme is proposed for remotely operated vehicles (ROVs) to enhance high-precision positioning and docking control in the presence of ocean current disturbances and model uncertainties. The scheme comprises a double closed-loop fractional-order PI λ D μ controller (DFOPID) and a model-assisted finite-time sliding-mode extended state observer (MFSESO). Among them, DFOPID effectively compensates for non-matching disturbances, while its fractional-order term enhances the dynamic performance and steady-state accuracy of the system. MFSESO contributes to enhancing the estimation accuracy through the integration of sliding-mode technology and model information, ensuring the finite-time convergence of observation errors. Numerical simulations and pool experiments have shown that the proposed control scheme can effectively resist disturbances and successfully complete high-precision tasks in the absence of an accurate model. This underscores the independence of this control scheme on accurate model data of an operational ROV. Meanwhile, it also has the advantages of a simple structure and easy parameter tuning. The FADRC scheme presented in this paper holds practical significance and can serve as a valuable reference for applications involving ROVs. [ABSTRACT FROM AUTHOR]

The International Hydrographic Organization (IHO) has established a new hydrographic information standard, the S-100 standard. This standard applies the ISO 19100 series to the legacy hydrographic exchange standard in order to overcome the limitations of existing hydrographic information expression. The first version of the S-100 standard was released in 2010, and the latest version, 5.0.0, was released in 2022. The International Maritime Organization (IMO) officially adopted the IHO-s S-100 for hydrographic information exchange. The S-100 standard is the base standard, and each hydrographic information is developed as a document called the product specification. The product specification is being developed and led by various standardization organizations. The product specifications developed by each standardization organization are based on S-100, but they are defined in various ways according to the characteristics of information and expression methods. In this paper, the different product specifications of IHO's S-12x series and IALA's S-2xx series are analyzed in terms of features and classes from the data model point of view. The analysis of the feature, attribute, and feature relationship of each product specification was conducted by reviewing both the Data Classification and Encoding Guide (DCEG) and the entire document of the product specification. This study has identified areas of overlap in S-100 product specifications and has explored potential solutions to address these issues. [ABSTRACT FROM AUTHOR]

Model-based systems engineering (MBSE) is a modeling approach used in industry to support the formalization, analysis, design, checking and verification of systems. In MBSE modeling, domain knowledge is the basis of the modeling. However, modeling does not happen overnight; it requires systematic training and a significant investment of resources. Unfortunately, many domain experts lack the expertise required for modeling, even though they know the domain well. The question arises about how to provide system modelers with domain knowledge at the right time to support the efficient completion of modeling. Since MBSE research that integrates AI is just beginning to take off, no public dataset is available. In this paper, aerospace SysML models are constructed based on spacecraft-related domain knowledge to form SysML model data. The validation rules are studied to validate the SysML model data, and combined with the concept of the recommended system, a recommendation method for the MBSE modeling process based on the knowledge and SysML model is proposed. A GLOVE language model is pre-trained by using domain knowledge and general knowledge; the model data are also used to fine-tune the GLOVE language model combined with the pre-training to recommend some domain development processes. The recommendation list is manually quality-verified and fed into the pre-training phase, while new requirement texts are continuously added in the fine-tuning phase, resulting in a more relevant and accurate recommendation list. Experiments show that the incremental recommender system can not only effectively recommend SysML models, but also improve the quality and efficiency of MBSE development. [ABSTRACT FROM AUTHOR]

Process industry suffers from production management in terms of efficiency promotion and waste reduction in large scale manufacturing due to poor organization of the intricate relational databases. In order to enhance the suitability of intelligent manufacturing systems in process industry, this study proposed an innovative top-down structure Knowledge Graph (KG) for process fault diagnosis, and papermaking was taken as a case study. The KG consists of a normalized seven-step-built ontology, which extracted instances of papermaking knowledge via Protégé software. The exported OWL file was imported into Neo4j software for visualization of the KG. The application in papermaking drying process for fault diagnosis shows that it can depict the material and energy flows throughout the process with a clearer relationship visualization than traditional measures. They also enable rationale search for faults and identification of their potential causes. The built KG efficiently manages the vast knowledge of the process, stores unstructured data, and promotes the intelligent development of process with high reusability and dynamicity that can rapidly import new production knowledge as well as flexibly self-updating. [ABSTRACT FROM AUTHOR]

The presented paper introduces a novel path planning algorithm designed for generating low-cost trajectories that fulfill mission requirements expressed in Linear Temporal Logic (LTL). The proposed algorithm is particularly effective in environments where cost functions encompass the entire configuration space. A core contribution of this paper is the presentation of a refined approach to sampling-based path planning algorithms that aligns with the specified mission objectives. This enhancement is achieved through a multi-layered framework approach, enabling a simplified discrete abstraction without relying on mesh decomposition. This abstraction is especially beneficial in complex or high-dimensional environments where mesh decomposition is challenging. The discrete abstraction effectively guides the sampling process, influencing the selection of vertices for extension and target points for steering in each iteration. To further improve efficiency, the algorithm incorporates a deep learning-based extension, utilizing training data to accurately model the optimal trajectory distribution between two points. The effectiveness of the proposed method is demonstrated through simulated tests, which highlight its ability to identify low-cost trajectories that meet specific mission criteria. Comparative analyses also confirm the superiority of the proposed method compared to existing methods. [ABSTRACT FROM AUTHOR]

The application of Artificial Intelligence (AI) and Machine Learning (ML) models is increasingly leveraged to automate and optimize Data Centre (DC) operations. However, the interpretability and transparency of these complex models pose critical challenges. Hence, this paper explores the Shapley Additive exPlanations (SHAP) values model explainability method for addressing and enhancing the critical interpretability and transparency challenges of predictive maintenance models. This method computes and assigns Shapley values for each feature, then quantifies and assesses their impact on the model's output. By quantifying the contribution of each feature, SHAP values can assist DC operators in understanding the underlying reasoning behind the model's output in order to make proactive decisions. As DC operations are dynamically changing, we additionally investigate how SHAP can capture the temporal behaviors of feature importance in the dynamic DC environment over time. We validate our approach with selected predictive models using an actual dataset from a High-Performance Computing (HPC) DC sourced from the Enea CRESCO6 cluster in Italy. The experimental analyses are formalized using summary, waterfall, force, and dependency explanations. We delve into temporal feature importance analysis to capture the features' impact on model output over time. The results demonstrate that model explainability can improve model transparency and facilitate collaboration between DC operators and AI systems, which can enhance the operational efficiency and reliability of DCs by providing a quantitative assessment of each feature's impact on the model's output. [ABSTRACT FROM AUTHOR]

Business Intelligence plays a vital role in helping organizations to extract meaningful insights from their data and make informed decisions. However, choosing the right data modeling approach can be challenging, as different methodologies have unique advantages and limitations. The focus of the current paper is to provide an insight into the Data Vault architecture, which is an emerging approach to data modeling, compared to the established methods of Kimball and Inmon. The paper conducted a comparative analysis of these methodologies, with a particular emphasis on the benefits of Data Vault. This study highlights the advantages of the Data Vault model in managing data from multiple sources and its compatibility with agile implementation practices. Overall, this paper sheds light on the relevance of Data Vault in contemporary data management practices. [ABSTRACT FROM AUTHOR]