Search

Those who work with wood should have a basic knowledge of wood anatomy and chemistry so they can understand how different anatomical and chemical features influence wood properties and, in turn, how these properties contribute to different treatments and final wood utilization. However, little attempt has been made to map global research trends in wood anatomy and chemistry. This paper presents a bibliometric review of research trends in wood anatomy and chemistry to determine research trends and gaps in these research areas. A total of 183 publications on wood anatomy and chemistry from 1974 to 2023 were reviewed. The analysis was done with the VOSviewer software (version 1.6.13). The analysis focused on the bibliographic coupling of countries, co-authorship of authors, citation of documents, and co-occurrence of keywords, which were presented as network visualization maps. The findings revealed that the wood anatomy and chemistry publication trends, although not completely gradient, have been upwards since 2000. Countries including Germany, the United States, Switzerland, the United Kingdom, Brazil, the Netherlands, China, Italy, Mexico, Spain, the Czech Republic, Canada, Australia, Chile, Finland, France, Sweden, and Japan had a great impact on this research area. It also became evident that African countries lag in this area of research. Only one data source - Scopus - was used. It has a wide coverage of publications from diverse areas and provides researchers with information on the most important academic literature in any specific scientific domain. Therefore, the representation of publications presented in this study is limited to only the Scopus data source. [ABSTRACT FROM AUTHOR]

This study outlines a method of utilizing the finite element method and a simple mathematical model to predict the behavior of laminated veneer lumber (LVL) beams strengthened with composite sheets. The numerical models were created using the Abaqus 2017 software. The LVL was considered as a linearly elastic or elastic–plastic material, factoring in Hill’s yield criterion. The composites were simulated as linearly elastic–ideally plastic materials. The mathematical models were predicated on the methodology of transformed cross-section. The theoretical and numerical outcomes were juxtaposed with previous empirical investigations. The comparison encompassed load-bearing capacity, stiffness, and deformation under peak force. Furthermore, presentations of normal stress maps in the LVL and composite have been illustrated. The derived maps were juxtaposed with the delineations of failure modes. An adequate correlation was identified between the theoretical, numerical, and empirical values in the case of beams reinforced with aramid, glass, and carbon sheets. The relative deviation varied from several to multiple percentages. This technique is not applicable for evaluating load-bearing capacity and deformation when only dealing with sheets with low elongation of rupture. This is a consequence of their premature failure. The proposed models may be utilized by researchers and engineers in the design of reinforcements for timber structures.

As towering wooden edifices (≥8 stories) become a rapidly expanding and promising field, they provide substantial environmental and economic advantages throughout their entire lifespans, leading to their increasing popularity, especially in the European context. Similar to various other construction forms, spatial efficiency is a vital design criterion in timber buildings to guarantee the viability of a project. Currently, there is no thorough study on spatial efficiency in these towers in Europe, which is home to the majority of the world’s timber towers. This paper examined data from 56 cases to improve comprehension of the planning factors affecting space efficiency in these buildings. The main findings showed that the average space efficiency across the analyzed examples was documented at 82%, with deviations spanning from 70% to 90%, the average core area to gross floor area (GFA) ratio was determined to be 11%, ranging from 4% to 21%, and no substantial difference was noted in the impact of core arrangements on space efficiency, and parallel findings were observed for forms and construction materials. This article aspires to provide architectural designers with essential perspectives, assisting and directing them in the conception and realization of upcoming ventures both across Europe and internationally in this domain.

Within the search for alternative sustainable materials for future transport applications, wood veneer laminates are promising, cost-effective candidates. Finite element simulations of progressive damage are needed to ensure the safe and reliable use of wood veneers while exploring their full potential. In this study, highly efficient finite element models simulate the mechanical response of quasi-isotropic [90/45/0/−45]s beech veneer laminates subjected to compact tension and a range of open-hole tension tests. Genetic algorithms (GA) were coupled with these simulations to calibrate the optimal input parameters and to account for the inherent uncertainties in the mechanical properties of wooden materials. The results show that the continuum damage mechanistic simulations can efficiently estimate progressive damage both qualitatively and quantitatively with errors of less than 4%. Variability can be assessedthrough the relatively limited number of 400 finite element simulations as compared to more data-intensive algorithms utilised for uncertainty quantification.

Due to a large number of harmful chemicals flowing into the water source in production and life, the water quality deteriorates, and the use value of water is reduced or lost. Biochar has a strong physical adsorption effect, but it can only separate pollutants from water and cannot eliminate pollutants fundamentally. Photocatalytic degradation technology using photocatalysts uses chemical methods to degrade or mineralize organic pollutants, but it is difficult to recover and reuse. Woody biomass has the advantages of huge reserves, convenient access and a low price. Processing woody biomass into biochar and then combining it with photocatalysts has played a complementary role. In this paper, the shortcomings of a photocatalyst and biochar in water treatment are introduced, respectively, and the advantages of a woody biochar-based photocatalyst made by combining them are summarized. The preparation and assembly methods of the woody biochar-based photocatalyst starting from the preparation of biochar are listed, and the water treatment efficiency of the woody biochar-based photocatalyst using different photocatalysts is listed. Finally, the future development of the woody biochar-based photocatalyst is summarized and prospected.

The thermo-mechanical behavior of polyurethane adhesive joints in wood structures is a crucial aspect that needs to be understood to ensure the durability and safety of timber structures, especially in seismic regions. As mass timber, particularly cross-laminated timber, continues to gain popularity as a building material, it is important to pay special attention to the behavior of connections between the timber elements. The use of flexible polyurethane adhesives presents a promising alternative to conventional mechanical connections in seismic-resistant timber structures. This research highlights the potential of polyurethane-based joints at elevated service temperature, offers a promising alternative to traditional wood joints, and suggests viability for post-fire restoration of wood structures. The response at the interface between wood and polyurethane under flexural stresses is also evaluated, underscoring the broader application possibilities of flexible adhesives in wood construction for mechanical and physical improvements.

Wood is a material whose properties vary depending on different conditions, being particularly vulnerable to changes induced by high temperatures. When exposed to a fire situation, the wood properties suffer degradation, causing a char layer formation. Despite ensuring the protection of the inner core of the wood, the char layer reduces its resistant section. The evaluation of wood behavior under fire conditions is possible through experimental tests, simplified analytical models, and numerical models. To overcome difficulties in the development of experimental tests and in the approximations made to analytical methods, numerical models allow the evaluation of the fire resistance in a parametric way. First, this study will present a numerical model validated with an experimental test, using the finite element method. The validation of the results is based on the evolution of the temperature field, the char layer formation on the wooden elements, and its residual section, as well as the application of the thermal insulation criterion. The second part of the study evaluates the influence of geometric parameters, associated with different wooden constructive models with gypsum board exposed to fire. Different numerical tests are presented to evaluate the thermal and transient analysis of different wooden constructive elements with gypsum board. This type of constructive element presents cavities, making the numerical analysis in the study complex when approaching real models. The methodology applied allowed us to conclude that, at the same time, a smaller distance between wooden centers, a greater dimension of the wooden beam in height and width, as well as a greater thickness of gypsum board guarantee a better performance of the constructive wooden model.

Stabilising the natural colour of wood species exposed to light in indoor conditions is a challenge that could be better addressed based on a deeper understanding of the occurring phenomena and influencing factors. This paper investigates comparatively the light-induced colour changes for three hardwood species, namely, European maple (Acer pseudoplatanus L.), European ash (Fraxinus excelsior L.) and European walnut (Juglans regia L.), as well as the influence of finishing with three types of clear, colourless waterborne lacquers: acrylic-polyurethane (F1), acrylic (F2) and polyurethane (F3) on their colour stability. Colour measurements in the CIELab system in conjunction with an artificial accelerated ageing test under the action of UV-VIS radiation, simulating natural light passing through window glass, and two types of test samples were employed to highlight the influence and contributions of the wood substrate and of the coating films to the global colour modifications. Coating films applied on 1 mm clear glass slides were employed as a sort of “detachable” finish for this purpose. Direct exposure to UV-VIS light caused visible colour changes for both uncoated and coated wood surfaces, the values of the calculated colour differences (ΔE) after a 72 h exposure being dependant on both the wood species and the coating material. Excepting two situations for walnut, statistically significantly higher colour differences were obtained for the uncoated samples: maple (9.36 units), ash (8.39 units), walnut (6.20 units), compared to the coated ones: maple (4.92–5.71 units), ash (2.25–3.94 units), walnut (4.74–7.70 units). The wood substrates underlying the coating films were found to bring the maximum contribution to the overall colour changes in the clear coated surfaces, while the coating films employed in this research demonstrated a fairly good colour stability to UV-VIS light exposure, with maximum colour changes (∆E) up to only 1.30 units. Overall, the wood species and the type of coating were found as influencing factors in interaction with the light-induced colour changes in wood surfaces in indoor conditions.

Sodium-ion batteries (SIBs) are utilized as a promising alternative to commercial lithium-ion batteries (LIBs) where hard carbons (HCs) are anticipated to be the first commercially available anode material for SIBs. Among various hard carbon precursors, the wood accounts for more than 30% of the global land cover, making it one of the most abundant sources of biomass materials on the planet. In addition to superior renewability, sustainability and biodegradability, wood and its derivatives still possess some unique advantages such as anisotropic graded porous structure, good mechanical stability and biocompatibility. The purpose of this review is to present a comprehensive overview of the development of research on wood and wood-derived HCs anodes. The basic structural and chemical properties of wood and wood-derived materials are indeed reviewed, as is the performance of wood-derived HCs in SIBs to provide an in-depth comprehension and guidance for the preparation of high-performance wood-based SIBs.

Solar-driven interfacial evaporation and purification is a promising solar energy conversion technology to produce clean water or solve water scarcity. Although wood-based photothermal materials have attracted particular interest in solar water purification and desalination due to their rapid water supply and great heat localization, challenges exist given their complicated processing methods and relatively poor stability. Herein, we propose a facile approach for fabricating a bilayered wood-poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (wood-PEDOT:PSS) hydrogel interfacial evaporator by direct drop-casting and dry-annealing. Benefiting from the unique combined merits of the wood-PEDOT:PSS hydrogel evaporator, i.e., excellent light absorption (~99.9%) and efficient photothermal conversion of nanofibrous PEDOT:PSS and the strong hydrophilicity and fast water transport from wood, the as-fabricated bilayered wood-PEDOT:PSS hydrogel evaporator demonstrates a remarkably high evaporation rate (~1.47 kg m−2 h−1) and high energy efficiency (~75.76%) at 1 kW m−2. We further demonstrate the practical applications of such an evaporator for sewage purification and desalination, showing outstanding performance stability and partial salt barrier capability against a continuous 10-day test in simulated seawater and an ultrahigh ion removal rate of 99.9% for metal ion-containing sewage. The design and fabrication of such novel, efficient wood-based interfacial evaporators pave the way for large-scale applications in solar water purification.

The present work analyses the absorption coefficient of sound waves and the speed of sound propagation in thermally modified wood. The high resistance to weathering, fungi, and better dimensional stability, and therefore the broad physical properties of this material, are well known. However, the literature lacks numerous analyses of its acoustic characteristics. During the study, high-density species, such as oak, red oak, and beech were used, in contrast to pine. Pine wood during this test was characterised by a most rapid increase in the sound absorption coefficient value, in the range of 1000–6300 Hz, and reached the highest value from all wood species. Among all species, the highest value of the examined parameter was obtained for beech wood and pine wood, which were 0.213 (at frequency 3 kHz) and 0.183 (at 6.3 kHz), respectively. The sound velocity decreased for all species only in the tangential direction.

To further enhance the performance of wood products, improved tools are needed to study in situ cellular scale phenomena like mechanical deformations and moisture swelling. Micro-X-ray computed tomography (μXCT) using brilliant synchrotron light sources now has the spatial and temporal resolution for real-time visualization of phenomena in three-dimensional cellular structures. However, the tradeoff for speed includes the loss of intensity contrast between different types of materials within the imaged structure, such as cell wall and air in wood. This loss of contrast prevents traditional histogram-based segmentation methods from being used effectively. A new convolutional neural network (CNN) approach was therefore developed to segment fast μXCT images of wood into cell wall and air volumes. The fast μXCT and segmentation were demonstrated in the study of moisture swelling in loblolly pine (Pinus taeda) earlywood and latewood cellular structures conditioned at 0%, 33%, 75%, and 95% relative humidity (RH). The CNN segmentation results had a mean intersection over union (IoU) metric accuracy of 96%. Initial analysis of the swelling in the latewood revealed cell walls swelled about 25% when conditioned from 0% to 95% RH. Additionally, the widths of ray cell lumina in the transverse plane of latewood could be observed to increase at higher RH. The segmentation method presented here will facilitate future quantitative analyses in in situ μXCT studies of wood and other similar cellular materials.

Light oil/water/heavy oil triphase mixtures are common in industrial wastewater, while nearly all separation materials with superwettability can only separate biphase mixtures of light oil/water or/and heavy oil/water. Here, a balsa wood slice with superhydrophilic/superoleophilic property in air was fabricated by a blade-cutting and ethanol-treating process. Therefore, the slice could be dually prewetted with both water and oil and thus showed underwater superoleophobic and underoil superhydrophobic properties without any further chemical modification. Such a slice showed underoil superhydrophobicity in nonbasic environment while transition into underoil superhydrophilicity under basic condition. Combining with the porous structure possessed by wood designed to transport liquids, this superwettability of the treated wood slice could be leveraged in the continuous separation of light oil/water/heavy oil triphase mixtures only driven by gravity with a high permeation flux and separation efficiency. After each separation, the slice was easily recovered by washing with acidic solution, and it could be recycled up to 15 times without any loss of pH responsibility. During repeated cycling separation, the slice exhibited excellent separation stability.

The use of energy-saving materials is an effective strategy for decreasing energy consumption and carbon emission. Wood is a type of biomass material with a natural hierarchical structure, which results in its high thermal insulation. It has been widely used in construction. However, developing wood-based materials without flammability and dimensional instability is still a challenge. Herein, we developed a wood/polyimide composite aerogel with a well-preserved hierarchical pore structure and dense hydrogen bonds inside, resulting in its excellent chemical compatibility and strong interfacial interactions between its two components. This novel wood-based composite was fabricated by removing most hemicellulose and lignin from natural wood, followed by the fast impregnation using an ‘in situ gel’ process. The introduction of polyimide into delignified wood substantially improved its mechanical properties, with the compression resistance being improved by over five times. Notably, the thermal conductivity coefficient of the developed composite was approximately half that of natural wood. Furthermore, the composite exhibited excellent fire-retardancy, hydrophobicity, thermal insulation, and mechanical properties. This study provides a novel method for wood modification, which not only aids interfacial compatibility between wood and polyimide but also retains the properties of the two components. The developed composite can effectively reduce energy consumption, making it promising for practical and complex thermal insulation applications.

In the world of cultural heritage, a wide range of artefacts and buildings are made of wood and, therefore, are subjected to moisture-induced stress and strain cycles, owing to environmental fluctuations. Simultaneous action of moisture and mechanical loads lead to a mechanosorptive effect on wood. Therefore, an increase in time-dependent creep, due to mechanical loads, is observed. The assessment of these complex phenomena entails the use of advance and interdisciplinary approaches. Consequently, this article reviews experimental and mathematical methods to study these degradation mechanisms in wooden artefacts and timber elements in heritage buildings. The paper presents the results of a six-step descriptive literature review, providing an overall picture of the ongoing research. Experimental techniques need to be improved so that they are in line with the conservation principles. The combination of experiments and simulations is a reliable predictive approach for better assessing the potential risk damages due to temperature, humidity cycles, and mechanical loads in complex structures. Thus, advanced numerical simulations and mathematical modelling include climate data and experimental measurements. This work also provides an overview of research performed on different categories of cultural heritage characterised by multi-layer structures. The mechanical response to wood–moisture relation is affected by the level of complexity of these structures. Finally, the use of realistic models is limited by knowledge about the material properties and the behaviour of complex structures over time. In addition, research gaps, limitations, and possible future research directions are also provided. This review may represent a starting point for future research on the thermo-hygro-mechanical behaviour of wood heritage.

As the focus of architecture, furniture, and other fields, wood has attracted extensive attention for its many advantages, such as environmental friendliness and excellent mechanical properties. Inspired by the wetting model of natural lotus leaves, researchers prepared superhydrophobic coatings with strong mechanical properties and good durability on the modified wood surface. The prepared superhydrophobic coating has achieved functions such as oil-water separation and self-cleaning. At present, some methods such as the sol-gel method, the etching method, graft copolymerization, and the layer-by-layer self-assembly method can be used to prepare superhydrophobic surfaces, which are widely used in biology, the textile industry, national defense, the military industry, and many other fields. However, most methods for preparing superhydrophobic coatings on wood surfaces are limited by reaction conditions and process control, with low coating preparation efficiency and insufficiently fine nanostructures. The sol-gel process is suitable for large-scale industrial production due to its simple preparation method, easy process control, and low cost. In this paper, the research progress on wood superhydrophobic coatings is summarized. Taking the sol-gel method with silicide as an example, the preparation methods of superhydrophobic coatings on wood surfaces under different acid-base catalysis processes are discussed in detail. The latest progress in the preparation of superhydrophobic coatings by the sol-gel method at home and abroad is reviewed, and the future development of superhydrophobic surfaces is prospected.

Listeria monocytogenes is a significant concern in cheese production. It has been assumed by some that wood surfaces pose a greater risk for pathogen contamination during cheese production. The goal of this study was to evaluate the effect of the microbiota obtained from wooden boards used in cheese ripening on the growth of Listeria monocytogenes. Bacterial communities from the surface of wooden boards obtained from cheese-ripening facilities were inoculated into tryptic soy broth (TSB) and incubated at 11 °C for 48 h. These communities (108 CFU/mL stationary phase cells) were co-incubated with 104–105 CFU/mL L. monocytogenes 2203 at 11 °C for up to eight days. At various times, samples were removed, diluted in sterile saline and plated on modified Oxford agar. Bacterial communities from each of the five boards from three different facilities significantly inhibited growth of L. monocytogenes in vitro, compared to growth of L. monocytogenes 2203 alone. Using 16S rRNA analysis, we identified sequences belonging to the genera Carnobacterium, Leuconostoc and Staphylococcus as the most abundant in the communities grown in TSB. Leuconostoc mesenteroides and Staphylococcus equorum isolated from the most inhibitory community significantly inhibited growth of L. monocytogenes in TSB at 11 °C, compared to growth of L. monocytogenes 2203 alone. These findings suggest that some members of the complex microbial communities on wooden boards in cheese aging facilities might inhibit the growth of L. monocytogenes.

To date, the share of research, teaching materials, and practices related to the use of timber in bridge projects in Finland are quite limited compared to other materials, such as concrete. This article, which also includes a structural design example for dimensioning a girder bridge, focuses on the status, applications and prospects of wood use in bridge construction, reflecting the Finnish professionals’ point of view. Key findings highlighted that: (1) the ideal use of wood would be in private road bridges and light traffic bridges; (2) while the use of wood in the bridge was assessed to be advantageous in terms of ecology, aesthetics, and environmental friendliness, it was reported to be disadvantageous in terms of long-term durability and connection details; (3) concrete and steel, whose prices fluctuate, could gradually be replaced by wood, a renewable material; (4) timber-concrete composite bridges were expected to become widespread in the future; (5) cross-laminated timber (CLT) could open up an opportunity for bridge decks; and (6) service limit state is often decisive for the dimensioning of wooden bridges. It is recommended to implement large-scale public projects for the wooden bridges by creating sustainable business models that will be supported both legitimately and economically by the local government. In this sense, close cooperation between authorities and other key market stakeholders is crucial.

Fasciclin-like arabinogalactan proteins (FLAs) play an important role in plant development and adaptation to the environment. However, the roles of FLAs in wood formation remain poorly understood. Here, we identified a total of 50 PtrFLA genes in poplar. They were classified into four groups: A to D, among which group A was the largest group with 28 members clustered into four branches. Most PtrFLAs of group A were dominantly expressed in developing xylem based on microarray and RT-qPCR data. The roles of PtrFLA40 and PtrFLA45 in group A were investigated via the Cas9/gRNA-induced mutation lines. Loss of PtrFLA40 and PtrFLA45 increased stem length and diameter in ptrfla40ptrfla45 double mutants, but not in ptrfla40 or ptrfla45 single mutants. Further, our findings indicated that the ptrfla40ptrfla45 mutants enlarged the cell size of xylem fibers and vessels, suggesting a negative modulation in stem xylem cell size. In addition, wood lignin content in the ptrfla40fla45 mutants was increased by nearly 9%, and the lignin biosynthesis-related genes were significantly up-regulated in the ptrfla40fla45 mutants, in agreement with the increase in wood lignin content. Overall, Cas9/gRNA-mediated mutations in PtrFLA40 and PtrFLA45 reveal redundant roles in modulating wood cell size and secondary cell wall (SCW) synthesis in poplar.

The possible influence of anatomical sections of wood on mold growth was investigated by means of a laboratory experiment. The selected fungi, Aspergillus sp., Penicillium sp., and Alternaria sp. were inoculated by spraying on the surface of wood specimens prepared from pine (Pinus sylvestris) and spruce (Picea abies). The incubation was carried out under stable environmental conditions (temperature of 22 °C, relative humidity of 75, 87, and 95%) over three months. Mold growth was evaluated based on regular microscopic and macroscopic observations. The recorded mold coverage fractions and the qualitative indicators of mold development were later expressed by a dimensionless mold index. The differences in mold growth in the anatomical sections of wood were found to be relatively insignificant. In contrast, comparison of measured data with other experimental studies showed large differences, especially in the initial growth phase. The discrepancy is probably related to differences among the experimental protocols. It is concluded that laboratory mold growth studies would be improved if a common standardized methodology was developed and followed.

This research bridges the gap between the quasi-static and high-strain-rate loading regimes in cross-laminated timber (CLT) by investigating two areas that have remained unstudied or elusive, i.e., rolling shear failure of CLT under impulsive, blast-like loading and intermediate strain rates in CLT. To study the conditions that would promote shear modes of failure, a novel, highly adaptable center-point testing system and methodology were developed that permitted the application of impulsive loading to undamaged CLT panels in a highly controlled and repeatable manner. The loading condition and low span-to-depth ratio (6.40 ≤ L:h ≤ 6.55) CLT were selected to encourage the development of shear modes of failure. Changes to the rotational rigidity at the boundary conditions allowed for the empirical simulation of realistic boundary conditions. Digital Image Correlation (DIC) and load cell data were used to identify failure modes following loss in resistance in the specimens. Overall, the experiment was successful in consistently eliciting shear modes of failure and providing damage characterization in impulsively loaded CLT. Shear modes of failure resulted in the dramatic loss of resistance in all specimens tested. Strain-rate enhancement in the dynamic apparent flexural stiffness of CLT of 1.3 to 7.2 times was observed. Lower levels of damage were observed in specimens with higher levels of boundary-condition rotational rigidity.

The substrate of solar cells with high haze, transparent, flexible, green and low coatings will be needed in the future. This paper reports a method for ultraviolet-assisted delignification of wood in an alkaline solution environment to improve the transmittance of “transparent wood”. Scanning electron microscope (SEM), X-ray diffraction image (XRD), Fourier transform infrared (FTIR) spectroscopy and transmittance-haze and chemical composition analysis were used to explore the mechanisms underlying the effect of ultraviolet-assisted lignin modification on the optical properties of “transparent wood”. The results show that UV-assisted delignification accelerates the rate of removal of lignin and chromogenic groups, which in turn improves the optical properties of the “transparent wood”, with UV-assisted lignin modification for 2 h increasing the light transmission of the “transparent wood” by 20%. UV-assisted delignification for 4 h and impregnation resulted in “transparent wood” with a transparency of 71% and a haze of 90%. This report provides a rapid and easy method to prepare high-quality “transparent wood”. The “transparent wood” with high transmittance and high haze is a potential candidate for transparent solar substrates. Meanwhile, this method is enlightening for high quality, fast and green preparation of other derived functional materials based on lignin wood.

The paper investigates the effects of roller pressing on the hardness, roughness, and elastic modulus of wooden workpieces. For research purposes, a roller pressing device based on purely mechanical processing was designed and developed. Four different levels of pressing force have been applied to eight different types of wood: cherry, fir, alder, linden, beech, walnut, oak, and ash. The obtained results indicate that the proposed processing method can significantly improve the hardness, elastic modulus, and surface quality of wooden workpieces. The ash sample exhibited the largest relative increase in hardness (175.9%), while the most significant relative increase in the elastic modulus (66.73%) was measured on the linden sample. The largest relative decrease in surface roughness (54.75%) was achieved on the alder sample. For all types of wood except for fir, in which case an increase in pressing force did not produce the desired reduction of roughness, correlation coefficients indicate a strong relationship between the pressing force as an input variable and the elastic modulus, hardness, and roughness as output variables.

The mold infection of wood reduces the quality of its surface and potentially endangers human health. One category of the most popular mold inhibitors on the market is water-soluble fungicides. However, easy leaching due to ionic forms is a problem, which reduces the effectiveness of their antimicrobial action, as well as causing environmental pollution. Interestingly, nanometer-sized sterilizing agents present strong permeability and highly fungicidal behavior, and they are not easily leached, due to the unique nanoscale effect, and they have become alternative candidates as marketable anti-mold agents for wood protection. In this study, we first designed and explored a nanoscale alloy (nano silver–copper alloy, nano-AgCu) to treat wood surfaces for mold growth resistance. The results showed that three molds, i.e., Aspergillus niger, Penicillium citrinum and Trichoderma viride, mainly grew on the surface of wood within a depth of 100 μm; and that the nano-AgCu alloy with a particle size of ~15 nm presented improved retention and anti-mold efficiency at a nanomaterial concentration on the wood surface. Its leaching rate increased non-linearly with the increase in nano-AgCu retention and then it showed a gradually decreasing trend. When the concentration reached 1000 mg/L, the nano-AgCu alloy uniformly distributed on the wood surface in a monodispersed state and exhibited a lower retention of 0.342 g/m2, with an anti-mold efficiency of more than 75% and a leaching rate of only 7.678%. Such results positioned 1000 mg/L as the toxic threshold concentration of nano-AgCu against the three molds. This study can provide a scientific basis for the analysis of the anti-mold mechanisms of nano-AgCu alloy on wood surfaces and guide the application of nano-metal alloy materials in the field of wood antimicrobials.

To counter a perceived increase in multi-piece fracturing of wood baseball bats, Major League Baseball implemented standards to regulate the quality of wood used in the making of professional-grade baseball bats. These specifications included a minimum density as a function of wood species and a standard related to slope of grain (SoG). Following the implementation of these specifications in 2008, there was a 65% reduction in the multi-piece failure rate. It is hypothesized that a further reduction in the breakage rate can be realized through the implementation of regulations on allowable bat profiles. In the current work, a parametric study was conducted to develop a quantitative understanding of the relationship between bat durability (i.e., resistance to breaking), SoG, and bat profile, thereby obtaining data to support or refute the hypothesis. Finite element models of the bat/ball impact of four different popular bat profiles were created using LS-DYNA software. Similarities and differences between bat profiles impacted at two relatively vulnerable axial locations are presented and discussed. Lastly, the respective bat durabilities for all of the profiles were compared using a probability analysis that considers the SoG, impact location, impact velocity, and it predicts an in-service bat durability.

This review describes methods and results of studying the mechanical properties of wood at all scales: from nano- to macro-scale. The connection between the mechanical properties of material and its structure at all these levels is explored. It is shown that the existing size effects in the mechanical properties of wood, in a range of the characteristic sizes of the structure of about six orders of magnitude, correspond to the empirical Hall-Petch relation. This “law” was revealed more than 60 years ago in metals and alloys and later in other materials. The nature, as well as the particular type of the size dependences in different classes of materials can vary, but the general trend, “the smaller the stronger”, remains true both for wood and for other cellulose-containing materials. The possible mechanisms of the size effects in wood are being discussed. The correlations between the mechanical and thermophysical properties of wood are described. Several examples are used to demonstrate the possibility to forecast the macromechanical properties of wood by means of contactless thermographic express methods based on measuring temperature diffusivity. The research technique for dendrochronological and dendroclimatological studies by means of the analysis of microhardness and Young’s modulus radial dependences in annual growth rings is described.

Effective prevention of mould growth indoors is still an important topic considering that mould growth is frequently observed in buildings, it causes serious health hazards and can irreversibly damage infected objects. Several studies have been conducted and mould growth models developed. Despite that, some potentially important aspects such as water damage and spore contamination have received only little attention. The objective of the present study was to investigate the effect of the initial moisture content of wood and spore contamination on mould development indoors. The mould tests were performed in constant temperature (10, 20 and 30 °C) and relative humidity (91% and 97%) conditions. The results show that wetting of wood specimens prior to the test significantly accelerates mould growth at a temperature of 10 °C. For the other temperatures, the effect was insignificant. Similar results were obtained for the test involving dry (conditioned at RH 50%) and conditioned specimens (RH 91% or RH 97%). The results regarding initial spore contamination show that significantly longer periods are required for mould to develop without spore contamination at 10 °C and 20 °C, while at 30 °C the effect is relatively small.

The numerical simulation of fire propagation requires capturing the coupling between wood pyrolysis, which leads to the production of various gaseous species, and the combustion of these species in the flame, which produces the energy that sustains the pyrolysis process. Experimental and numerical works of the fire community are targeted towards improving the description of the pyrolysis process to better predict the rate of production and the chemical nature of the pyrolysis gases. We know that wood pyrolysis leads to the production of a large variety of chemical species: water, methane, propane, carbon monoxide and dioxide, phenol, cresol, hydrogen, etc. With the idea of being able to capitalize on such developments to study more accurately the physics of fire propagation, we have developed a numerical framework that couples a detailed three-dimensional pyrolysis model and fireFoam. In this article, we illustrate the capability of the simulation tool by treating the combustion of a wood log. Wood is considered to be composed of three phases (cellulose, hemicellulose and lignin), each undergoing parallel degradation processes leading to the production of methane and hydrogen. We chose to simplify the gas mixture for this first proof of concept of the coupling of a multi-species pyrolysis process and a flame. In the flame, we consider two separate finite-rate combustion reactions for methane and hydrogen. The flame evolves during the simulation according to the concentration of the two gaseous species produced from the material. It appears that introducing different pyrolysis species impacts the temperature and behavior of the flame.

The goal of this research was to synthesize activated nitrogen-doped nanocarbons with high specific surface area and adjustable pore size distribution using wood charcoal as a raw material. The resulting carbon materials were tested for possible application as oxygen reduction reaction catalysts in alkaline media. Activated carbons were obtained using a thermochemical activation method with NaOH. Nitrogen was introduced into activated carbons using dicyandiamide solution. It was demonstrated that the content of introduced nitrogen depends on oxygen content in the structure of the activated carbon. The oxygen reduction reaction activity of the activated and nitrogen-doped carbon material was comparable with a commercial 20% Pt/C catalyst. Electrocatalytic properties of the synthesized N-doped wood-derived carbon catalysts may be associated with the highly developed surface area, specific ratio of micro- and mesopores, as well as the high percentage of pyridinic nitrogen.

Three-dimensional (3D) printing, or additive manufacturing, is a group of innovative technologies that are increasingly employed for the production of 3D objects in different fields, including pharmaceutics, engineering, agri-food and medicines. The most processed materials by 3D printing techniques (e.g., fused deposition modelling, FDM; selective laser sintering, SLS; stereolithography, SLA) are polymeric materials since they offer chemical resistance, are low cost and have easy processability. However, one main drawback of using these materials alone (e.g., polylactic acid, PLA) in the manufacturing process is related to the poor mechanical and tensile properties of the final product. To overcome these limitations, fillers can be added to the polymeric matrix during the manufacturing to act as reinforcing agents. These include inorganic or organic materials such as glass, carbon fibers, silicon, ceramic or metals. One emerging approach is the employment of natural polymers (polysaccharides and proteins) as reinforcing agents, which are extracted from plants or obtained from biomasses or agricultural/industrial wastes. The advantages of using these natural materials as fillers for 3D printing are related to their availability together with the possibility of producing printed specimens with a smaller environmental impact and higher biodegradability. Therefore, they represent a “green option” for 3D printing processing, and many studies have been published in the last year to evaluate their ability to improve the mechanical properties of 3D printed objects. The present review provides an overview of the recent literature regarding natural polymers as reinforcing agents for 3D printing.

The dry rot fungus Serpula lacrymans is the most destructive fungal agent of wood building materials in Europe, Russia, North America, and Japan. The identification of this wood-deteriorating agent and the discrimination of different fungal isolates is very important for the control of buildings in general and for the preservation of cultural heritage in particular. The objective of the study was to develop a Fourier transform infrared (FTIR) method coupled with a partial least square discriminant analysis (PLS-DA) for the sample preparation and identification of S. lacrymans. Five distinct S. lacrymans strains were analysed and compared to two strains of unrelated fungal species. Different methods of mycelial growth, sample preparation, and FTIR spectral data normalisation were compared. FTIR analysis of a harvested mycelium grown on the surface of a polyether sulfone microfiltration membrane deposited on a malt extract agar medium, followed by vector normalization and PLS-DA statistical analysis, resulted in 100% correct attribution at phylum, species, and strain level, regardless of the type of standardization used. This study confirms the applicability of FTIR spectroscopy for the identification of S. lacrymans and the discrimination of different strains belonging to this species.