Search

Reducing mechanical losses and suppressing self‐heating are critical characteristics for high‐power piezoelectric applications. For environmentally friendly Pb‐free piezoelectric ceramics, traditional acceptor doping or annealing treatments have successfully improved the mechanical quality factor (Qm) based on a ceramic matrix with a poor piezoelectric coefficient (d33<100 pC/N). Nevertheless, a ceramic with high Qm and d33 values has not been reported owing to the inverse relationship between Qm and d33. Herein, a novel hardening method called grain boundary diffusion is used to develop Pb‐free potassium sodium niobate ceramics, where Qm increased by more than two‐fold (from 51 to 132) and a high d33 value (d33 = 360 pC/N) is maintained. Significantly, d33 retained 98% of its initial value after 180 days, exhibiting improved aging stability. The established properties are associated with the formation of the core‐shell microstructure and the full gradient composition distribution using structural characterizations and phase‐field simulations, where the core maintains a high d33 and the shell provides a hardening effect. The novel hardening effect in piezoelectric materials, known as grain boundary diffusion hardening, highlights the enhancement of the mechanical quality factor with high piezoelectricity, providing a new paradigm for the design of functional materials. [ABSTRACT FROM AUTHOR]

The piezoelectric actuator is a kind of actuation device that acts through the inverse piezoelectric effect. Due to advantages of high precision, low power consumption, compact size, and flexible structure design, they have a wide range of applications in optics, robotics, microelectromechanical systems, and so on. Piezoelectric materials are the core materials for piezoelectric actuators. In this review, recent developments in high-performance piezoelectric materials (HPMs) are introduced, including relaxor ferroelectric crystals, textured ceramics, piezoelectric metamaterials, and so on. The advances of piezoelectric actuators are introduced in this review based on the developments of those piezoelectric materials, where the relationship between the figure of merits of materials and the performance of actuators is also discussed. Finally, we present outlooks and challenges for piezoelectric materials and actuators. [ABSTRACT FROM AUTHOR]

Traditional piezoelectric adaptive lenses (ALENS) are fabricated by piezoceramics with transparent liquids as the filling media. However, it is challenging to achieve high focal sensitivity and long-time robustness because of the low piezoelectricity of ceramics as well as the evaporation and leakage of the liquids. To overcome the above-mentioned issues, we design a piezoelectric lens based on a radial extension-arching mode by using polydimethylsiloxane films and Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 (PIMNT) relaxor ferroelectric single crystals to replace the transparent liquids and Pb(Zr, Ti)O3 (PZT) ceramics, respectively. Due to the ultrahigh piezoelectric properties (d33 ∼ 1500 pC N−1 and d31 ∼ 730 pC N−1) of the PIMNT crystals and the optimized radial extension-arching structure, an ultrahigh focal sensitivity (8.5 cm V−1 and a fast response time (∼102μs) is achieved, outperforming conventional ALENS based on piezoceramic actuators (∼103 μs and ∼10−1 cm V−1) and dielectric elastomer actuators (∼105 μs and ∼10−2 cm V−1). The largest output displacement of our designed ALENS is up to 53.6 μm at 4.2 kHz under 80 Vpp, and its focus is in the range of 57.44 cm to ∞. Furthermore, its performance remains unchanged after 4 × 107 vibration cycles, indicating its long-time robustness. This work sheds light on the design of advanced adaptive optical systems, where an ultrahigh focal sensitivity and a fast response are required. [ABSTRACT FROM AUTHOR]

Textured piezoelectric ceramics, such as textured Pb(Mg1/3Nb2/3)O3‐PbTiO3 (PMN‐PT) ceramics, have attracted considerable attention from both academia and industry, as they possess crystal‐like piezoelectric properties, high composition homogeneity, and low manufacturing cost. However, the main difficulty with the textured piezoelectric ceramics is the presence of BaTiO3 (BT) templates, which greatly reduces their piezoelectricity and phase transition temperature. Thus, it is highly recommended to fabricate textured piezoelectric ceramics using as few templates as possible. Here, we successfully fabricated high‐quality <001>‐textured PMN‐28PT ceramics (texturing degree of 99%) by using an extremely small amount of BT templates (1 vol.%) with the help of CuO/B2O3 sintering aids. The textured PMN‐28PT ceramic exhibits 80% piezoelectric coefficient (d33 ∼ 1200 pC/N), 96% electromechanical coefficient (k33 ∼ 88%) and the same temperature stability (Trt ∼ 100, Tc ∼ 150°C) when compared to its single crystal counterpart. In addition, by using an alternating current electric field poling (AC‐poling), the piezoelectric coefficient d33 and dielectric permittivity ε33 of the textured PMN‐28PT ceramics were further enhanced around 5–8%. It is believed that the advantages of high electromechanical properties, low cost, and easy mass production of textured PMN‐28PT ceramic will make it a promising candidate for advanced electromechanical devices. [ABSTRACT FROM AUTHOR]

There is a great demand to develop ferroelectric ceramics with both high piezoelectric coefficient and broad temperature usage range for emerging electromechanical applications. Herein, a series of Sm3+‐doped 0.25Pb(Mg1/3Nb2/3)O3‐(0.75−x)PbZrO3‐xPbTiO3 ceramics were fabricated by solid‐state reaction method. The phase structure, dielectric and piezoelectric properties were investigated, where the optimum piezoelectric coefficient d33 = 745 pC/N and electromechanical coupling factor k33 = 0.79 were obtained at the morphotropic phase boundary composition x = 0.39, with good Curie temperature TC of 242°C. Of particular importance is that high‐temperature stability of the piezoelectric and field‐induced strain was obtained over the temperature range up to 230°C for the tetragonal compositions of x = 0.40. The underlying mechanism responsible for the high piezoelectricity and temperature stability is the synergistic contribution of the MPB and local structural heterogeneity, providing a good paradigm for the design of high‐performance piezoelectric materials to meet the challenge of piezoelectric applications at elevated temperature. [ABSTRACT FROM AUTHOR]

The development of ferroelectric ceramics with both large piezoelectric responses and broad service temperature range is still a key challenge for practical applications due to the so-called d 33 - T C trade-off. Here we report the strategy to utilize the synergistic contribution of morphotropic phase boundary and enhanced local structural heterogeneity, in which an excellent piezoelectric coefficient d 33 of 680 pC/N and a high Curie temperature of 330 ℃ are simultaneously achieved in Sm modified 0.25PIN-0.325PZ-0.425PT ceramics. The underlying mechanism responsible for the high dielectric and piezoelectric properties is studied based on cryogenic dielectric measurement and Rayleigh analysis. Of particular interest is that, a high field-induced strain of 0.19% is achieved in 0.25PIN-0.32PZ-0.43PT at electric field of 20 kV/cm, corresponding to a piezoelectric d 33 * of 945 pm/V, showing an excellent temperature stability with minimal variation of 7% up to 310 °C. This work demonstrates the introduction of high temperature end members and rare earth doping are conducive to ferroelectric solid solutions with desired broad usage temperature range and superior piezoelectric properties, which will greatly benefit high temperature actuator applications. [ABSTRACT FROM AUTHOR]

Phase boundary engineering (PBE) has remarkably enhanced the piezoelectric properties of potassium sodium niobate {(K, Na)NbO 3 , KNN} piezoceramics, yet the physical mechanisms need to be further understood. Here we outline a new physical phenomenon to describe piezoelectricity enhancement in KNN-based ceramics with PBE. We propose that the enhancement is due to the multi-phase coexistence featured with strong relaxation behavior. The strong relaxation behavior was unambiguously revealed by cryogenic experiments and originated from the polar nanoregions (PNRs) exhibiting a scale of 2.1 nm and a weak tetragonality (c/a = 1.0040). in situ temperature-dependent experiments uncovered the thermal evolution of the ferroelectric matrix and PNRs in both unpoled and poled samples, the first report in KNN-based ceramics. Our experiments combined with phenomenological theory revealed that ultra-fine nanodomains, PNRs, and easy polarization rotation together promote macro dielectric and piezoelectric properties in the relaxation-featured multi-phase coexistence. This work reveals the physical mechanism from different levels (e.g., local-mesoscopic-macroscopic), thus providing a new systematic understanding of the observed enhancement of piezoelectricity. Proposing a new physical mechanism, relaxor-featured multi-phase coexistence, to explain piezoelectricity enhancement in potassium sodium niobate-based ceramics. [Display omitted] [ABSTRACT FROM AUTHOR]