Search

In recent years, I‐III‐VI semiconductor quantum dots (QDs) have shown significant improvements that have unlocked new capabilities and end markets. Some typical examples of I‐III‐VI QDs are CuAlS2 (blue), AgInS2 (green), CuInSe2 (red) CuInSe2 (near‐IR), but other compositions and alloys are possible. These materials exhibit tunable photoluminescence (PL) emissions, and can achieve near unity PL quantum yield. They can have efficient broad emission, but also can have narrow emission, large Stokes shifts, and high optical extinction coefficients. These materials are often more stable, safer, and lower cost than alternatives such as CdSe, InP, and PbS or PbSe QDs. In this work, we discuss industrialization and scale‐up of I‐III‐VI QDs, starting with critical end uses related to spectrum optimization for greenhouses and solar energy. We also update on recent progress narrowing the emission linewidth (full‐width at half maximum) of I‐III‐VI QDs to the point that they are becoming competitive with legacy QDs used in displays and lighting. [ABSTRACT FROM AUTHOR]

New arrangements of power are emerging in response to the turbulence generated by the quest to improve life and render it productive. This paper specifies such arrangements by developing the concept of metabolic politics: an apparatus that shifts from discipline to power regulating material, bodily, and environmental transformations. The dominant function of metabolic politics is to render the transformative capacities of living bodies and the circulatory dynamics of materials into object‐targets of governance. Through a comparative analysis of regulating pollution from industrial poultry units in Britain and India, the paper identifies logics of a metabolic politics and distinguishes these from the biopolitics of populations. Metabolic politics entails interventions targeting a milieu rather than deviant populations; its actions are directed at transformative capacities of bodies in addition to improving their productivity; its modes of governance operates via regulation and not just discipline; and its techniques of operation proceed through modulation instead of enclosure. Metabolic politics is a transversal form of power. It is situated and historically contingent, rather than uniform and universal. As a response to crises generated by the industrialisation and cheapening of life, metabolic politics furnishes vital insights into the administration and governance of the contemporary living and material world. [ABSTRACT FROM AUTHOR]

Symbiosis is a higher requirement for the sustainable development of industrial development and ecological environment, which is different from coordination or coupling. However, in the current research on the application of symbiosis theory, there are problems of conceptual confusion and unsystematic evaluation indicators, especially in the area of sustainable development. Therefore, the paper attempts to systematically identify and evaluate the symbiosis relationship between industrial development and ecological environment. The study creatively builds the theoretical framework of complex symbiotic system, including the social‐economic‐natural macrosystem and industrial‐ecological environmental microsystem. Based on DPSIR and Lotka‐Volterra model, a set of symbiotic coordination evaluation systems is proposed, and a symbiotic security pre‐warning mechanism is established. Then taking the Three Gorges Ecological Economic Corridor of the Yangtze River in China as an example, the paper demonstrates the feasibility of this method. Finally, suggestions are given to optimize the symbiosis development between industrial development and ecological environment, which also confirm the practicability of the Dimensionality Enhancement Plan we proposed to achieve sustainable development. [ABSTRACT FROM AUTHOR]

Compared with the conventional emulsification method, droplets generated within microfluidic devices exhibit distinct advantages such as precise control of fluids, exceptional monodispersity, uniform morphology, flexible manipulation, and narrow size distribution. These inherent benefits, including intrinsic safety, excellent heat and mass transfer capabilities, and large surface‐to‐volume ratio, have led to the widespread applications of droplet‐based microfluidics across diverse fields, encompassing chemical engineering, particle synthesis, biological detection, diagnostics, emulsion preparation, and pharmaceuticals. However, despite its promising potential for versatile applications, the practical utilization of this technology in commercial and industrial is extremely limited to the inherently low production rates achievable within a single microchannel. Over the past two decades, droplet‐based microfluidics has evolved significantly, considerably transitioning from a proof‐of‐concept stage to industrialization. And now there is a growing trend towards translating academic research into commercial and industrial applications, primarily driven by the burgeoning demands of various fields. This paper comprehensively reviews recent advancements in droplet‐based microfluidics, covering the fundamental working principles and the critical aspect of scale‐up integration from working principles to scale‐up integration. Based on the existing scale‐up strategies, the paper also outlines the future research directions, identifies the potential opportunities, and addresses the typical unsolved challenges. [ABSTRACT FROM AUTHOR]

In recent years there has been a growing interest in the scale‐up and commercialization of lignocellulosic biorefinery. Process simulation is a crucial preliminary study, conducted at the system level, to evaluate the feasibility of industrializing biorefinery operations. Numerous research studies have been conducted on the application of process simulation in lignocellulosic biorefinery, making it essential to provide a detailed introduction to this topic. This paper summarizes two aspects of the application of process simulation in lignocellulosic biorefinery: the production of bioenergy and the production of biochemicals. The bioenergy section describes the application of process simulation to hydrochar, syngas, and bioethanol. The biochemicals section relates to the production processes for cellulose, lignin, and hemicellulose. Additionally, the research status of process simulation in biorefinery are detailed from the following aspects: physical property parameters, kinetic study, the variety of raw materials and validation. Finally, this paper discusses some advances in biorefinery process simulation. It is hoped that this paper will assist the industrialization of lignocellulosic biorefinery. [ABSTRACT FROM AUTHOR]

Low‐carbon sustainable development is considered an essential strategy for achieving economic growth and environmental protection, requiring a fundamental transformation of the industrial structure, including developing clean technologies, promoting energy efficiency, and adopting sustainable production and consumption patterns. Simultaneously, the evolving digital economy is acknowledged as an essential driver in optimizing the industrial structure. Therefore, can digital economy development reshape the industrial structure and lead to low‐carbon sustainable development? The main purpose of this paper is to examine the mediating role of industrial structure upgrading in the relationship between the digital economy and low‐carbon development. Its ultimate purpose is to explore more possible paths to achieve low‐carbon development. This paper builds a regression model based on the data of cities. We found that digital economic development can directly promote low‐carbon sustainable development, a conclusion that still holds after endogeneity discussion and robustness testing. Additionally, digital economy development can promote industrial structure upgrading and thus promote low‐carbon sustainable development, meaning that industrial structure upgrading is an effective mechanism for digital economy development to promote low‐carbon sustainable development. This paper provides empirical evidence for the positive environmental externalities of digital economic development and establishes a basic research framework of "digital economic development → industrial structure upgrading → low‐carbon sustainable development." [ABSTRACT FROM AUTHOR]

Manufacturing has the potential to drive economic growth, job creation and poverty reduction, but African manufacturers face challenges in competing with global markets. Agricultural machinery manufacturing may be one niche where African manufacturers can succeed. This paper examines the challenges and opportunities facing local agricultural manufacturers in Africa based on a survey of 386 manufacturers in four countries and qualitative methods. Results show that small, dedicated entrepreneurs have created vibrant local machinery markets. These manufacturers have several comparative advantages, in particular, the ability to develop machinery adapted to local agroecological conditions but face challenges related to financing, human resources, utilities, raw materials, production equipment and the regulatory environment. The paper offers recommendations on how to support local manufacturers to make "Made in Africa" the first choice for African farmers and agro‐food processors. [ABSTRACT FROM AUTHOR]

The idea and related practices of slowness have received global attention, as these have been viewed as reactions to and critiques of this "go‐faster" world. Celebration of slowness has been especially prominent in South Korea, which experienced an accelerated transition to a post‐industrial society. In line with recent power‐sensitive studies of slowness, this paper develops a governmentality approach that examines how slowness shapes particular bodily behaviours. Drawing on recent work on rhythmanalysis and governmentalities, this study examines how slowness is enrolled and enacts the rhythmic governing of "Olle" walking – the South Korean countryside walking experience. It specifically relates the analysis to the site‐specific experience of accelerated modernisation, where the legacy of state‐led industrial development persists in the prevailing neoliberal capitalism. First, it examines the ways in which slow rhythm is involved in walking practice, deploying and reproducing a specific rhythm, body, and the mode of biopower. It then looks at several ways through which the emerging slow rhythm of Olle walking and the fast rhythm of everyday life are negotiated. This paper argues that slow walking can serve as an affirmative mode of rhythmic governing that fosters care of the self and the environment. [ABSTRACT FROM AUTHOR]

Since the "double carbon" target was proposed in 2020, emissions reduction has become the focus of the Chinese government's work. Industrial development is a crucial factor contributing to the increase in carbon emissions. Therefore, implementing carbon reduction in the industrial sector is an important part of China's goal of "double carbon." In this context, this paper uses a three‐stage data envelopment analysis model to calculate the green total factor productivity (GTFP) of 18 industry sectors in Shanxi Province. The results show that: (1) the external environment has influence on the GTFP of energy revolution reform pilot area industrial sectors, and the efficiency value of two industries is overestimated before excluding environmental factors; (2) the industry difference of GTFP is significant, among which pharmaceutical manufacturing industry has the greatest promoting effect on GTFP, and ferrous metal mining and dressing industry has the greatest inhibiting effect on GTFP; (3) there is a serious redundancy in R&D investment of energy revolution reform pilot area in China, and only six industries belong to zero redundancy. (4) To reflect the GTFP of various industrial sectors more clearly, this paper divides four industries: "Double‐high" industry, "High‐low" industry, "Low‐high" industry, and "Double‐low" industry. [ABSTRACT FROM AUTHOR]

This paper examines research in the area of leadership and the fourth industrial revolution (4IR) by scoping literature through a systematic approach. The purpose of this study is to identify trends and gaps relating to issues addressed, theoretical and conceptual approaches, methodologies, geographical representation of research, and future research directions in the area. In all, 45 articles were sampled through a predetermined selection criteria and analysed using descriptive statistics. The results indicate that four major issues investigated in multiple sectors dominate the area. Besides, a number of theories were found to have been used in understanding the topic, while in terms of methodology, there appears to be a fair distribution of papers using qualitative and quantitative approaches but an imbalance between cross‐sectional and longitudinal designs. Again, most of the studies were conducted at the meso and micro levels and were produced in Asia, Europe, Africa, North America, Australia, and South America in that ranking order. Overall, it was realised that because of the emerging nature of the 4IR phenomenon, research work in the area is now rising, requiring further research output to address the gaps identified through this study. [ABSTRACT FROM AUTHOR]

This paper offers an alternative explanation of the performance of the steel industry in Trinidad and Tobago (T&T). The steel industry emerged due to social mobilizations demanding changes to the colonial economy by investing natural resources in state‐led industrialization and welfare improvement. This investigation contends that the "resource curse" account that describes so‐called intrinsic social pathologies whereby postcolonial actors interfere with market freedom is misguided. A "resource curse" fundamentally offers a racialized conception of state corruption and incompetence within peripheralized economies. This study challenges this explanation showing how postcolonial arrangements reflect persistent colonial entanglements and contradictions, as resource dependence emerges from a long history of colonial exploitation and racialized subjugation within a global market predicated on a "global color line". The T&T government's industrial effort was circumvented by both domestic and international economic and political pressures revealing a racial hierarchy and power asymmetries. Anti‐competitive sanctions from the (colonial) global economic powers United States and Europe, structural adjustment that maintained this system and improper dealing by foreign players were among these discriminatory practices. Similarly, elite behavior and political decisions reflecting (neo)‐colonial tendencies also undercut the sector's long‐term development. Together, these configurations reveal continuities, changes and contradictions within the island's postcolonial economic structure. [ABSTRACT FROM AUTHOR]

This paper aims to analyze the research themes that are addressed in studies on industrial symbiosis (IS), from the perspective of theories. The paper method is a longitudinal analysis of retrospective nature from 1998 to 2021. This approach allowed to detects the main drivers and associated themes that structured researches on IS in the period. In general, Industrial Ecology Theory, Network Theory, Systems Theory and Organizational Theory were present in a considerable part of research themes on IS. It was observed that the IS research themes moved over the period analyzed to nine areas of study: (1) Waste as a resource, (2) development industrial symbiosis network, (3) circular economy and industrial symbiosis, (4) industrial co‐localization, (5) energy innovations, (6) closed loop chains, (7) IS's social aspects, (8) regional‐level metabolism, and (9) waste knowledge. In summary, the contributions of this paper are the thematic proposition of IS from the perspective of theories, pointing out the key‐aspects; and presentation of a research themes' diagram towards the IS buildup. [ABSTRACT FROM AUTHOR]

This paper aims to unfold how peripheral reindustrialisation in Central and Eastern Europe (CEE) produced multiple marginalities in local spaces. Relying on a cultural political economic (CPE) approach, we analyse how the imaginary of reindustrialisation encompassed the discourses on development and the strategies and practices of powerful agents of economic restructuring in an old mining town of Hungary, which entailed new dimensions and depths of poverty. By discussing the changing labour, housing, and environmental conditions of the local poor, we relate structural changes to the changing conditions of social reproduction and local history, and highlight how the new economic trajectory produced marginalised spaces within a dynamic region. In this way, we also extend CPE‐guided research more to the realms of social reproduction and ethnic social relations to get a more fine‐grained understanding of inequalities rooted in peripheral industrialisation and scrutinise prevailing narratives of economic development in CEE. [ABSTRACT FROM AUTHOR]

Summary: The latest developments in the industrial Internet of things (IIoT) have opened up a collection of possibilities for many industries. To solve the massive IIoT data security and efficiency problems, a potential approach is considered to satisfy the main needs of IIoT, such as high throughput, high security, and high efficiency, which is named blockchain. The blockchain mechanism is considered a significant approach to boosting data protection and performance. In the quest to amplify the capabilities of blockchain‐based IIoT, a pivotal role is accorded to the Glowworm Swarm Optimization (GSO) algorithm. Inspired by the collaborative brilliance of glowworms in nature, the GSO algorithm offers a unique approach to harmonizing these conflicting aims. This paper proposes a new approach to improve the performance optimization of blockchain‐based IIoT using the GSO algorithm due to the blockchain's contradictory objectives. The proposed blockchain‐based IIoT system using the GSO algorithm addresses scalability challenges typically associated with blockchain technology by efficiently managing interactions among nodes and dynamically adapting to network demands. The GSO algorithm optimizes the allocation of resources and decision‐making, reducing inefficiencies and bottlenecks. The method demonstrates considerable performance improvements through extensive simulations compared to traditional algorithms, offering a more scalable and efficient solution for industrial applications in the context of the IIoT. The extensive simulation and computational study have shown that the proposed method using GSO considerably improves the objective function and blockchain‐based IIoT systems' performance compared to traditional algorithms. It provides more efficient and secure systems for industries and corporations. [ABSTRACT FROM AUTHOR]

Ghana's petroleum industry is located several nautical miles offshore in the Western Region of the country. Yet, the mechanisms and processes of production and transportation of crude petroleum are accompanied by the dispossessing of the adjoining coastal communities of their means of (re)production both on the ocean and on land. Although the insights of agrarian political economy have been deployed fruitfully to analyse land grabs in Africa, similar efforts are rare when it comes to ocean grabs. With reference to the new development thinking on the ocean economy—or 'blue economy'—as the new frontier of resource‐based industrialization in Africa, we re‐frame the agrarian question and apply it to the offshore petroleum industry, expanding agrarian political‐economic theory of industrialization beyond its traditional confines of land and agriculture. Our paper makes two main theoretical contributions. First, it contributes to efforts in agrarian political economy to incorporate the ocean and fisheries. Second, we contribute a fresh theoretical framework for analysing offshore petroleum industries and their potential to contribute to industrialization in Africa. [ABSTRACT FROM AUTHOR]

In global pattern reconstruction, ecological civilization construction and integrated urban–rural development in the new era as well as outlining a new framework for rural development and promoting efficient operation of the coordination mechanism for rural development are urgently required. This paper considers three northeastern provinces of China as an example, attempts to analyze the relationship between the subsystems of rural development, and examines the coupling coordination mechanism of population, land, and industry money in the four‐dimensional system. It explores the evolution path and defects of rural development in Northeast China under the background of transformation from a systematic perspective. We found that the coupling degree of "population‐land‐industry‐money" in rural Northeast China is high, while the coordination degree is low. The degree of spatial and temporal differentiation of the coupling coordination degree gradually increases, and the rural development of each province is highly unbalanced. The results also indicate that the main reasons for the low level of the coupling coordination degree are improved land development levels, a relative shortage of labor force, backward industrial development, and increasingly weak rural investment levels. Finally, this paper illustrates that the main solutions to rural revitalization are stimulating rural investment through policies and promoting the revival of agriculture, with financial support as the starting point, before establishing the linkage and mutual feed development of "population‐land‐industry‐money" in rural areas. The results will help countries, especially developing countries, to further consider methods toward achieving rural development. [ABSTRACT FROM AUTHOR]

The way to Construction 4.0 in the production and construction of infrastructure projects The construction industry is facing profound changes. Among other things, the requirement of implementing a more sustainable building culture, the increasing shortage of skilled workers and the rising demand for infrastructure construction projects, are challenges of today. Indeed, the industry will not succeed in solving these challenges with the procedures and processes that have been practised for decades. Therefore, it is important to prepare the construction industry for the implementation of Construction 4.0. This paper explains what is behind the term Construction 4.0 and what difficulties currently exist in its implementation. Based on this, recommendations, measures and initial approaches for implementing are presented. Thereby, the paper focus on the production and construction phase of infrastructure projects, which is important for construction companies. [ABSTRACT FROM AUTHOR]

BACKGROUND: As a result of the ban on whaling, there has been a shortage of spermaceti, a natural product with applications in cosmetics and pharmaceuticals. A green and sustainable process for the biocatalytic synthesis of a wax ester mixture analogue to natural spermaceti is presented in this paper. RESULTS: Immobilization of Candida antarctica lipase B by covalent binding to Purolite® Lifetech™ ECR8285 allowed for an immobilized derivative with 124.5 mg protein/g support (69.3% protein immobilization yield) that maintains 100% of its enzymatic activity after 12 months of cold storage and presents negligible loses of activity after 9 consecutive reaction cycles. The optimization of the synthesis process in a batch reactor resulted in conditions that, at 70 °C, 350 rpm, and 1.25% w/w of biocatalyst, achieved a conversion of 97% after 1 h of reaction. The simulation of a spermaceti production plant was carried out using the process simulation software aspenONE suite v10. The plant was designed for a continuous operation during 9 h per day, with a reactor of 20.25 L of working volume and a residence time of 1 h. The production of this plant would be 173.25 kg spermaceti/day, with a product purity of 99.55%. CONCLUSION: The main novelty of this work is the design of a spermaceti production plant, using the most sustainable methodologies and resulting in a product with exceptional characteristics and minimal waste generation. Moreover, a new lipase immobilized derivative is also described. The good values of sustainability indicators point to the viability of its industrial implementation. © 2023 The Authors. Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI). [ABSTRACT FROM AUTHOR]

It has been speculated that by the year 2050, technology will have progressed to the point of complete autonomy. This paper scrolls through patent pathways and intellectual developments throughout the industrial revolutions listing significant products and services that landmarked each revolution up to Industry 4.0. The patent trails and the recent IPR inputs are expected to assist readers in fast‐tracking up to speed on the bleeding edge of the current research pools while having an eagle's eye perspective on the previous developments so far. The research pools of Industry 4.0 are classified and explored. A lack of Human‐machine workforce synergy in Industry 4.0 and the nascent "customized manufacturing" concept is addressed in subsequent sections. The paper classifies two expected phases of Industry 5.0, highlighting the subdomains touted to be its focal areas. Lastly, Industry 5.0's niche research areas are checked and a suitable pathway to achieve the goals set for the sixth revolution is proposed. [ABSTRACT FROM AUTHOR]

This paper adopts a novel Social Reproduction feminist approach to re‐evaluate the Soviet experience of industrialization within the context of global research on primitive accumulation. I analyse the first Five‐Year Plan as a unique process of 'primitive Soviet accumulation,' focusing on the Zhenotdel collectivization campaign and the often‐overlooked role of Zhenotdel peasant women delegates [krestyanki delegatki]. The study explores their involvement in peasant women's revolts against collectivization, emphasizing the significance of these events for the Zhenotdel's emancipatory programme in the village. Considering class as a social relation to the conditions of life's reproduction, I demonstrate: (1) how primitive Soviet accumulation reshaped the gendered metabolic relationship between land and labour during the first Five‐Year Plan and (2) yet, the allocation of surplus into the expanded Soviet state apparatus laid the foundation for the distinctive Soviet mother–worker gender contract and social citizenship model. [ABSTRACT FROM AUTHOR]

Due to complexity increases in modern systems and the digitalization paradigm shift, industrial development requires the integration of new technologies and methods to keep product quality high while reducing time to market. One emerging paradigm in the Systems Engineering (SE) discipline is ModelBased methods and technologies, and correspondingly Model‐Based Systems Engineering (MBSE) is seeing increased adoption. With mature MBSE application, several benefits can be expected from the availability of models, even from the very early stages of development, enabling increased communication clarity, cross‐domain collaboration, traceability, and analysis. Notably, MBSE enables (Co‐)simulation even at the early stage of architecture/design by leveraging model‐based capabilities. Co‐simulation specifically enables a smooth and seamless integration of different models defined across layers of abstraction, for example, system logical architecture and system physical architecture. However, while MBSE is assisting with many aspects of development it is still a predominantly isolated set of activities throughout the development, especially on the left‐hand side of the traditional V‐model. In this work we discuss the status of Co‐simulation in industrial MBSE and list several existing challenges, then we propose a novel framework for implementing Co‐simulation and exemplify using a real scenario how we might address the observed challenges. The framework hinges on the newly proposed SSP standard and extends the currently industrially adopted FMI (version 3) standard through embedding the FMI file format using various scripts, demonstrated in the Python language for this paper. Finally, we propose a set of recommendations for future investigations to strengthen Co‐simulation in industrial MBSE. [ABSTRACT FROM AUTHOR]

Digital technologies and digitalisation are emerging as new drivers of structural transformation in developing countries. At the firm level, adopting advanced digital technologies offers prospects for improved productivity and competitiveness and, hence, digital industrialisation. However, the determinants of adopting digital technologies in manufacturing firms in developing countries remain anecdotal. This paper uses unique survey data on 516 manufacturing firms in South Africa and a multivariate probit model to examine the determinants of digital technology adoption in South African manufacturing firms. Our results show heterogeneity in the factors explaining digital technology adoption across business functions. Overall, the empirical results reveal that innovation, foreign ownership, exposure to export markets, and higher skilled human capital propel the adoption of digital technologies. In contrast, the lack of capital inhibits the adoption of digital technologies in sampled manufacturing firms in South Africa. We discuss the possible policy implications of these findings and how they fit into the South African Digital Skills policy discourse. [ABSTRACT FROM AUTHOR]

Summary: Internet of Things (IoT) specifies a transparent and coherent integration of assorted and composite nodes. Unification of these nodes with large resources and servers has brought advancement in technology for industrial and government services. The industrial IoT (IIoT), with smart nodes, enhance the development and manufacturing of industrial process, which is on demand now. However, the security concern is substantial, and it is required to control to perform prosperous assimilation of IIoT. Authentication of these smart nodes and establishing mutual trust among them is essential to keep vulnerabilities and potential risks out. Hence, this paper presents an efficient lightweight secure authentication protocol from the perspective of human‐centered IIoT. This proposed scheme assumes a registration center which simply generates public and secret information for a node when it initially joins the network. Once registration is done, the registration center is not needed anymore, and advanced processes like mutual authentication, secure key exchange, and communications are independently done by nodes involved. Furthermore, we show that this scheme can reduce exponential computations and computational overhead and resolves various possible attacks. [ABSTRACT FROM AUTHOR]

System reconfiguration is essential in complex systems management, as it is an enabler of system flexibility and adaptability. It ensures system operation and increases reliability, availability, maintainability, testability, safety, and reuse of system entities and technologies. For the reconfiguration of a system in use, it is necessary to assess, in continuity, the system's state with regard to its context. Identifying data supporting system reconfiguration represents a major industrial challenge and is linked directly to the development of industrial reconfiguration tools. Reconfiguration tools are based on a data model, also called ontology, which represents key concepts of system reconfiguration and their relationships. A particular difficulty of developing the data model is the multi‐domain nature of reconfiguration. Furthermore, it needs to address a considerable diversity of system types. Few publications propose an ontology supporting data identification and tool development for the entire process. Hence, in this paper we propose to formalize the system reconfiguration process and propose an overarching ontology, which we call OSysRec. This ontology considers data at the management, dynamics, and structure level. The proposed ontology has been developed based upon expert knowledge and several industrial uses cases. The OSysRec ontology allowed a better understanding of the reconfiguration process, and hence it can be deployed for developing efficient and effective reconfiguration tools at the industrial scale. The ontology has been tested on an industrial case study to validate the proposed approach. [ABSTRACT FROM AUTHOR]

The transportation sector has a strong negative impact on the environment and therefore requires new sustainable development measures. This paper proposes a new indicator of sustainability in transport obtained through a multi‐criteria analysis based on Eurostat data and a panel of 10 academics. The results show a positive performance of Sweden in the period 2015–2019 and a small number of countries above the European average. Furthermore, a quantitative analysis based on these experts identifies the critical success factors associated with purchasing electric vehicles. The greatest importance is assigned to purchase cost, followed by battery autonomy. Our analysis proposes that electric vehicles are unable to achieve a sustainable transition unless three conditions are met: (i) use of renewable sources, (ii) local industrial development of the sector, and (iii) battery recycling. Therefore, Europe urgently needs to realize new industrial activities and avoid social unsustainability. The long‐term objective of a policy plan is to promote independence from external sources of energy, materials, and other resources. [ABSTRACT FROM AUTHOR]

Benefitting from the development of industrial intelligence, data‐driven soft sensors have been widely applied in industrial processes in recent years. Driven by fluctuations in raw material quality, varying loads, and uncertain disturbances, industrial processes are often characterized by nonstationary properties. However, the nonstationary characteristics of the process are not considered in traditional data‐driven methods, leading to the poor prediction performance of soft sensors. Meanwhile, numerous nonstationary modelling methods have been proposed for process monitoring, with probabilistic stationary subspace analysis (PSSA) showing significant application potential. Unfortunately, PSSA has not yet been used to develop effective soft sensors for nonstationary processes. Therefore, the PSSA model is extended to the regression form (PSSR), and a corresponding soft sensing model is developed in this paper. Unlike previous approaches, the proposed PSSR can offer a suitable description of nonstationary processes and fully capture the mathematical correlation between input and output variables. Finally, the prediction performance of PSSR is verified through case studies on a numerical example and penicillin fermentation process. The experimental results indicate that PSSR can provide a superior solution for soft sensing modelling of nonstationary industrial processes. [ABSTRACT FROM AUTHOR]

The paper empirically examines the internationalization‐output nexus in 15 late‐industrialized countries from 1976 to 2018 using fixed and random effects techniques. The findings reveal that trade openness negatively impacts the industrial output, while the labor force shows a positive and statistically significant impact. Domestic investment and education show negligible and insignificant positive and negative impacts on output, respectively. Investment is supposedly incurring zero marginal productivity of capital as it is high in excess of labor. In a nutshell, it is capital bias. Furthermore, bias in terms of complex skill requirements in production prevents the entry of less‐skilled labor force. Given these outcomes, we conclude that the incremental capital‐output ratio (ICOR) needs to be tested to find out additional intricate issues involved in investment. Besides, the comparative advantage in less skilled labor is underutilized. To overcome this, the policymakers should ensure absorption of such semi‐skilled human capital. This requires removing skill bias and capital bias to a reasonable extent without damaging output generation. Hence, the study suggested that the late‐industrialized nations may use the potential labor force and capital to speed‐up long‐term industrial development by enhancing human capital through training, technical know‐how, etc., to attain sustainable industrial development. [ABSTRACT FROM AUTHOR]

This paper examines the long‐ and short‐run impacts of the railway zones associated with the China Eastern and South Manchuria Railways in Manchuria, which were administered by Russia and Japan, respectively, from the early 1900s to the 1920s. Despite the fact that 'railway imperialism' impaired China's sovereignty and territorial integrity and constituted a humiliating quasi‐colonial episode in Chinese history, railway zones nevertheless had a noticeable impact on Manchuria's local economies. Through a reconstruction of the historical dataset and cliometrics, we show that, among the railway zones in northeastern China, only those attached to the South Manchuria Railway exerted a significant and positive impact. Specifically, its railway zone had higher urbanisation and literacy rates and a higher percentage of professionals in its industrial and commercial sectors in the 1930s, and these effects persist to the present day as an unintended outcome. Apart from the agglomeration of direct manufacturing investment in these railway zones, an additional channel through which the impact took effect was the provision of public goods, such as schools and hospitals, which served as necessary conditions for long‐term development. This study sheds light on understanding the persistence of colonial history as a root of development. [ABSTRACT FROM AUTHOR]

Despite the considerable constraints of karst rocky desertification on the production and life of the locals and the regional economy, few studies have been conducted on areas with karst rocky desertification with the aim of exploring the balance between ecological governance and industrial development. In light of the promotion of featured advantageous industries to ecological governance and industrial development, this study aims to explore the mechanism of industrial revitalization in areas with karst rocky desertification to provide theoretical support for their industrial revitalization. Based on actor‐network theory, this paper presents a case study of Bashan village, a typical area in Guizhou province, China, with karst rocky desertification, to clarify the course of development of its Zanthoxylum bungeanum industry and propose a mechanism for its revitalization. The findings identify the main actors of the revitalization of the Z. bungeanum industry and reveal the driving forces behind it. Moreover, the study found that the industrial revitalization model is a bottom‐up process, which suggests strong endogenous dynamics. Through the revitalization of the featured industries, the results of the management of rocky desertification are transformed into economic output, which improved the livelihood of farmers and consolidated the effectiveness of management. [ABSTRACT FROM AUTHOR]

Virtually all theories of economic growth predict a positive relationship between population size and productivity. In this paper, I study a particular historical episode to provide direct evidence for the empirical relevance of such scale effects. In the aftermath of the Second World War, 8 million ethnic Germans were expelled from their domiciles in Eastern Europe and transferred to West Germany. This inflow increased the German population by almost 20%. Using variation across counties, I show that the settlement of refugees had large and persistent effects on the size of the local population, manufacturing employment, and income per capita. These findings are quantitatively consistent with an idea‐based model of spatial growth if population mobility is subject to frictions and productivity spillovers occur locally. The estimated model implies that the refugee settlement increased aggregate income per capita by about 12% after 25 years and triggered a process of industrialization in rural areas. [ABSTRACT FROM AUTHOR]

This paper analyzes environmental convergence and its determinants. We construct our analysis in a bilateral setting and hypothesize that, through foreign direct investment (FDI), one or more investor countries could impact the environmental performance of their hosts, leading thus to a possible environmental convergence between home and host economies. To do this, we construct an original database on bilateral FDI encompassing 128 countries for the period 2000-2012. Our results suggest that, in general, FDI does not directly impact environmental convergence, except for the case of FDI originating from major investor countries. Under specific conditions, FDI can be expected to influence environmental convergence along with other variables such as GDP per capita, industrial development, geographical proximity, or cultural and historical ties. Overall, these effects may vary depending on the type of partnership considered (North-North, North-South, South-North, and South-South). [ABSTRACT FROM AUTHOR]

This paper traces the institutional root of China's rural industrialization to a historical policy, which paired factories in urban areas with people's communes in the countryside during the Send‐Down Movement in the 1970s. The policy, initially intended to improve the lives of sent‐down youth (SDY), is believed to have provided some initial impetus for industrial development in rural areas before the marketization reform that began in the late 1970s. Based on a manually collected county‐level panel dataset of Zhejiang Province, we find that following the implementation of the pairing policy in 1974, counties that received a higher concentration of SDY, relative to their rural population, achieved faster growth in per capita industrial output of commune enterprises. Our results are consistent with various historical accounts. In addition, our tentative evidence shows that the pairing policy had a prolonged effect on rural economic development, lasting into the 1980s. Overall, our findings reveal the importance of some pre‐reform institutions in shaping China's unique paths towards industrialization. [ABSTRACT FROM AUTHOR]

Industrialization constitutes one of the strategies of structural transformation in many sub‐Saharan African (SSA) countries. In this paper, we re‐examine the effect of financial development on the industrialization of 35 SSA countries over the period 1996–2018. Contrary to previous work, we formulate the hypothesis that there exists a threshold of financial development beyond which financial development positively influences industrialization. Using the dynamic panel threshold regression model, and system generalized methods of moment models, we find two main results. First, financial development has a negative and significant impact on the development of industrialization. Secondly, the findings show the existence of a nonlinear relationship between financial development and industrialization development. Thus, we find that financial development has a negative effect on industrialization below the threshold while the effect is significantly positive on industrialization in countries whose financial development is above the threshold. The results are stable to the different robustness tests used. These findings highlight the need for SSA countries to develop better financial institutions if they hope to boost the manufacturing sector. [ABSTRACT FROM AUTHOR]

Insects are the largest biological group on the earth, characterized by high biodiversity, easy rearing, and large populations. The utilization of insects in China has a long history and some insect species have contributed to the formation of characteristic industries. Insect products, such as silk and honey, are already familiar to the public; however, many beneficial insects and their products are not well known to most people, for example, lac insect and lac, gall aphid and Chinese gallnut, and insect wax. A new industry featuring the utilization and industrialization of insects has been rising in China. Chemically, insect products are used as raw materials; agriculturally, insects are utilized to pollinate crops for better yield; natural enemy insects have been reared to control pests; insect protein may be used for human food or animal feed; medicinally, chemical compounds may be extracted from insects as active ingredients for pharmaceutical usage; and ornamental butterfly has been applied in travel sightseeing. Insects' new purpose and function will be exploited as they gain recognition for their resources. This paper reviews insect industrialization in China and discusses the prospect of insect commerce in the future. [ABSTRACT FROM AUTHOR]

Human agency has become a core topic in economic geography complementing traditional, structural approaches to explain regional development. This paper contributes firstly with a discussion of the theoretical and conceptual relationships between the agency of individuals, organizations, and systems. Secondly, it proposes a novel analytical framework for studying how human agency, combined with external changes affects regional economic development, and how regional structural preconditions and external changes explain the activation of change agency. Thirdly, the relevance of the framework is examined through comparative studies of about 20 years of industrial development in three Norwegian regions. This illuminates the importance of human agency in regional transformation processes, how regional preconditions influence but not determine the activation of change agency, as well as why and how regional policy plays a role in the emergence of change agency. Yet, future research needs to investigate the context conditions, which promote or hinder the activation of change agency, to trace change in economic activities over time and link it to causal mechanisms, and to pay attention to the unintended consequences of change agency in the longer‐term. [ABSTRACT FROM AUTHOR]

Summary: The evolution of Internet of Things (IoT) has led to the development of Industrial Internet of Things (IIoT). IIoT is one the widely applied areas to facilitate people in the manufacturing world. The adoption of IIoT automates sensing, capturing, communicating, and processing in real time. To understand how rapidly IoT and IIoT are growing, this article examines the emergence of 5G‐enabled IIoT, current research trends in IIoT, key milestones achieved in IIoT, and IoT applications specific to 5G‐enabled IIoT. The paper presents the state‐of‐the‐art in networking layered framework of IIoT and comparing relationships of technologies of cloud computing as well as edge computing paradigms. We also explored the type of security attacks and their preventive measures in an IIoT‐driven 5G technology. We have also highlighted the revolution of IIoT‐driven 5G framework which satisfies the demands of IIoT applications. [ABSTRACT FROM AUTHOR]

Application of BIM in the context of Construction 4.0 in the Oberbürgermeister‐Karl‐Lehr bridge project The construction industry is facing new demands, such as the creation of a more sustainable building culture and the necessary increase in efficiency. These challenges can only be solved with the help of modern planning and construction methods such as Building Information Modelling, which opens the way to Building 4.0. Due to the increasing requirements for implementing the BIM method in infrastructure projects, it is important for companies to build up experience. For this reason, the Max Bögl Group decided to use the BIM method in the production and construction phase of the Oberbürgermeister‐Karl‐Lehr bridge project. In addition to an overview of the project, this paper provides a summary of the BIM methods used and the lessons learned. [ABSTRACT FROM AUTHOR]

Using a panel data covering more than 100 countries worldwide, we have estimated a dynamic panel model to investigate the relationship between financial development and manufacturing industries' growth. More specifically, we have estimated the effect that institutional quality might have in this relationship in sub‐Saharan Africa (SSA). The results show that lower quality institutions in SSA are a hindrance to the role financial development plays in the growth of the manufacturing industrial sector, as compared with developed countries. These findings are robust when a quantile regression model is used. Furthermore, the results confirm that the relationship between per capita GDP and industrialization is nonlinear. Finally, in SSA, the abundance of natural resources has an adverse effect on the manufacturing industrial value added, providing more evidence for the Dutch disease hypothesis. [ABSTRACT FROM AUTHOR]

This study explores the potential for South Africa to become an engine for intra‐regional trade and industrial development in Southern Africa. It focuses on new backward linkages that can be created from South African exports of final products to producers of intermediate inputs in other Southern African countries. We do so by identifying South Africa's lead products, where it has formed its own GVCs, and, in turn, earmarking intermediate inputs used in the production of these lead products. Using Revealed Comparative Advantage and Unit Cost analysis, we identify Southern African countries that could supply the identified imported intermediate inputs more competitively than South Africa's existing partners and kickstart regional integration. We explore issues around the nature of linkages, supplier capabilities and industrial policies in the region, with special reference to the identified product value chains. Focusing on the agricultural sector—a key regional priority with immense potential for industrial growth and large‐scale employment—we also identify existing agricultural lead products in South Africa, and the 'new markets' to which South Africa can export. [ABSTRACT FROM AUTHOR]

Industrial catalyst development is a complex issue that requires optimization of performance, synthesis, costs, and engineering aspects. During the development, structure‐property relations are often used to provide valuable insights into the catalyst. However, conventionally, this process is time‐consuming and costly. Advancements in the field of automation for experimentation, data collection, and simulations have allowed the use of machine learning (ML) strategies for this development. Herein we provide an industrial perspective on ML strategies for the development of solid catalysts. [ABSTRACT FROM AUTHOR]

Front and back cover caption, volume 40 issue 4 VIETNAMESE UNDERGROUND LOTTERY The front cover image captures the essence of Vietnam's underground lottery game, đề. Central to the scene are runners and bookies, the critical intermediaries in this illegal yet persistent practice. In a bustling urban setting, people gather to watch lottery draws, discuss numbers and place bets. Numbers dominate the visual landscape, appearing on scraps of paper, digital displays and floating ethereally in the background. These are not mere figures, but powerful symbols carrying deep personal and cultural meanings. A player might be seen contemplating everyday objects or recalling a dream, illustrating how đề participants creatively derive their bets from daily life and nocturnal visions. The image reflects Le Hoang Anh Thu's research on how đề permeates players' routines in Ho Chi Minh City. It depicts the intersection of tradition and modernity, with the game thriving amidst a rapidly changing urban environment. The dreamlike quality of floating numbers and faint lottery ticket patterns echoes the players' belief in supernatural messages. This visual narrative encapsulates how đề transcends gambling to become a way for players to interpret their world. It invites readers to consider the broader anthropological significance of numerical symbolism across cultures, highlighting how numbers shape life narratives and cultural performances. The cover image thus offers a glimpse into a practice that connects everyday Vietnamese experiences with deeper cultural meanings, illustrating the universal yet culturally specific ways numerical reasoning permeates human life. MACROBIOTICS IN VIETNAM This image captures the essence of Le Hoang Ngoc Yen's study on macrobiotics in Vietnam, showing the striking differences between city life and traditional macrobiotic practices. The left side depicts a bustling cityscape, symbolizing the challenges of contemporary living. High‐rise buildings, heavy traffic and visible pollution represent the environmental degradation that accompanies rapid industrialization and urbanization. This side embodies the health hazards of modern life, including exposure to pollutants and processed foods, which many Vietnamese associate with the rise in chronic diseases like cancer, diabetes and cardiovascular ailments. In contrast, the right side portrays a serene rural setting that embodies macrobiotic principles. Lush greenery, simple homes and clear water symbolize harmony with nature. Community members engage in health‐promoting activities such as gardening and cooking with fresh, organic ingredients. This side represents the perceived benefits of returning to natural, unprocessed foods and a lifestyle aligned with ancestral wisdom and environmental sustainability. Yen's research, based on extensive interviews and field visits, reveals growing concern among Vietnamese about the impact of modernization on health and the environment. Many attribute the increase in chronic diseases to chemical‐laden, processed foods and polluted environments. The macrobiotic diet, known in Vietnamese as gạo lứt muối mè ('brown rice and sesame salt'), emphasizes organic whole grains, vegetables and minimally processed foods. Followers view it as more than just a diet – it represents a return to a simpler, more natural way of life in harmony with nature. This perspective illuminates how traditional knowledge addresses modern challenges. The macrobiotic movement offers anthropologists insights into cultural constructions of health, resistance to globalized food systems, and identity negotiation in changing societies. It contributes to debates on tradition and modernity shaping health paradigms and environmental relationships. [ABSTRACT FROM AUTHOR]

Developing countries are balance‐of‐payments constrained. In this context, high‐value agricultural exports can make a greater contribution to structural change than development economists and developing country governments have typically acknowledged. This is thanks to dramatic recent changes in agricultural production, consumption and trade. These transformations are obscured by a simple classification system that has not adapted to changing patterns of global capitalist production. This article examines some recent efforts to rethink the basis of economic classification; it contributes to this emerging literature by proposing a way to think about the distinctions among economic activities that builds directly from the observation of production rather than a method of ex‐post mapping of trade data. A more accurate classification of economic activities would, the authors suggest, help policy officials design more coherent and growth‐enhancing industrial policies in support of accelerated structural change and productivity growth. The article draws on primary fieldwork in Ethiopia in particular, but also on fieldwork in South Africa and on secondary evidence. [ABSTRACT FROM AUTHOR]

The reservation of goods to be produced in the micro, small, and medium enterprises (MSME) sector, in the early years after India's independence, addressed the dual needs of development of the industrial sector and production of goods. However, these industrial policies created an incentive for firms to remain small so that they can continue to avail of the benefits provided by the Government. On the positive side, the MSMEs typically employ more labor intensive production processes and consequently contribute significantly to the provision of employment opportunities, generation of income, and poverty reduction. But, on the negative side, the policies have also partly facilitated the creation of a divide in terms of productivity between the MSMEs and large sized firms. In particular the policy raises important questions for a firm auctioning supply contracts among suppliers with a significant cost differential. In this paper we propose an idea to allocate supply contracts wherein a manufacturing firm partitions the stochastic demand into mutually exclusive portions and awards each portion to a different supplier. We characterize such an optimal procurement mechanism when there are two types of suppliers and an arbitrary number of demand portions. We show that the optimal procurement may require the manufacturer to intentionally withhold some demand portion, and this arises when one type of supplier is considerably inefficient in serving a demand portion. We extend our analysis to the cases with multiple types with two suppliers and two types with multiple suppliers. The optimal partition is composed of at most six contiguous demand portions, and it may include a detrimental demand portion that only generates a negative expected payoff to both supplier types. Our demand partitioning mechanism leads to a strictly higher manufacturer's expected payoff than the conventional winner‐take‐all case unless one supplier type completely dominates the other. We present numerical experiments that indicate when such a mechanism holds the greatest advantage for the buyer. [ABSTRACT FROM AUTHOR]

This paper presents an evolutionary model of coordination problems in economic development that examines technology adoption jointly with skill acquisition. The model allows for multiple channels of interdependence across firms and for employment creation to be determined by technological and institutional factors. We show that industrial policies are key to ensuring the effectiveness of educational policies, and that robust employment creation is key to ensuring the effectiveness of both industrial and educational policies. These results speak to recent concerns about insufficient employment creation in high‐productivity activities and suggest the need to include employment promotion as an objective of development policy. [ABSTRACT FROM AUTHOR]

The Chinese central government has greatly supported two strategic high‐tech industries: 5G and supercomputing. However, when both encountered similar U.S. sanctions, the 5G industry failed to make crucial upstream components while the supercomputing industry could. This article argues that the central government‐level industrial policies contributed to these divergent outcomes. Using natural language processing and qualitative content analysis of meticulously collected official documents and secondary sources, key policy differences were identified. Before the U.S. sanctions in May 2019, China's 5G industrial policies were significantly unbalanced, with inadequate attention given to research and development of vital upstream components, contributing to a lack of upstream investment. Although recent attempts to rebalance 5G industrial development since 2021, the policy focus remains largely on the mid and downstream segments. In contrast, before the U.S. sanctions in 2015, the supercomputing industrial policies emphasised the development of the entire industrial chain, including crucial upstream components, resulting in China's possession of entirely homegrown supercomputers. Leveraging a tri‐level analysis framework rooted in political economics, this study also offers possible explanations for the policy divergence and discusses implications. It contributes to the existing literature and ongoing debate on China and industrial policy amidst great power high‐tech competition. [ABSTRACT FROM AUTHOR]

The power conversion efficiency (PCE) of perovskite solar cells (PSCs) has been renewed annually, now recorded to 25.7%, which is the highest efficiency for thin‐film solar cells, raising expectations for commercialization. However, the PSCs have a massive technical lack in entering the photovoltaic industry because of the low PCE of perovskite solar modules (PSMs), poor stability, high levelized cost of energy (LCOE), and environmental issues. Herein, cutting‐edge studies for overcoming the challenges faced by commercialization of PSCs are discussed. First, the reduction of the efficiency gap between small‐area PSCs and the large‐area PSMs via the solution process is reviewed. Second, the strategies for stable PSMs are discussed to reduce the LCOE. In addition, the environmental issues for manufacturing and sustainable use of PSMs are dealt with and it is demonstrated that the recycling/reuse of PSMs is the most promising way to reduce the manufacturing costs. Finally, it is suggested that the life cycle assessment system from manufacturing to recycling/reuse for PSMs is the key technology to resolve the commercialization issues of PSCs. [ABSTRACT FROM AUTHOR]

The research on Society 5.0 (s5.0) and Industry 5.0 (i5.0) is a relatively new and emerging domain where researchers are still striving to explore the influence within distinct contexts, worldwide. The study investigates the impact of two major models of industrialization, that is, s5.0 and i5.0 to understand the insights into how it triggers the firms' sustainable development by showing empirical examinations from the Chinese industrial sector drawing on normative stakeholder theory perspective. The results asserted that the i5.0 model positively affects sustainable performance (SSP). The empirical analysis confirmed a positive association of s5.0 model toward SSP. In addition, it found that s5.0 and i5.0 models have a positive correlation with the economic perspective of SSP. Second, the findings asserted the positive linkage between i5.0 and s5.0 from a social perspective. Finally, the study found a significant correlation between i5.0 and s5.0 on the environmental factors, respectively. This study equipped both frameworks to empirically conduct the contextual examination showing insights into the embodiment of such capabilities that may support achieving SSP. This study shows insights into certain policy implications. For instance, i5.0 and s5.0 both models support shaping innovative ecosystems, encouraging ethical and sustainable practices, encouraging effective infrastructure, empowering citizen participation, and supporting work for the betterment of society. Finally, the study enlists certain managerial and theoretical recommendations for the industries together with possibilities of future research for scholars of the world. [ABSTRACT FROM AUTHOR]

Industrialization—including urbanization, participation in the global food chain and consumption of heavily processed foods—is thought to drive substantial shifts in the human microbiome. While diet strongly influences stool microbiome composition, the influence of diet on the oral microbiome is largely speculative. Multiple ecologically distinct surfaces in the mouth, each harbouring a unique microbial community, pose a challenge to assessing changes in the oral microbiome in the context of industrialization, as the results depend on the oral site under study. Here, we investigated whether microbial communities of dental plaque, the dense biofilm on non‐shedding tooth surfaces, are distinctly different across populations with dissimilar subsistence strategies and degree of industrialized market integration. Using a metagenomic approach, we compared the dental plaque microbiomes of Baka foragers and Nzime subsistence agriculturalists in Cameroon (n = 46) with the dental plaque and calculus microbiomes of highly industrialized populations in North America and Europe (n = 38). We found that differences in microbial taxonomic composition between populations were minimal, with high conservation of abundant microbial taxa and no significant differences in microbial diversity related to dietary practices. Instead, we find that the major source of variation in dental plaque microbial species composition is related to tooth location and oxygen availability, which may be influenced by toothbrushing or other dental hygiene measures. Our results support that dental plaque, in contrast to the stool microbiome, maintains an inherent stability against ecological perturbations in the oral environment. [ABSTRACT FROM AUTHOR]

Two‐dimensional (2D) transition metal carbides, and/or nitrides, so‐called MXenes, have triggered intensive research interests in applications ranging from electrochemical energy storage to electronics devices. Producing these functional devices by printing necessitates to match the rheological properties of MXene dispersions to the requirements of various solution processing techniques. In particular, for additive manufacturing such as extrusion‐printing, MXene inks with high solid fraction are typically required, which is commonly achieved by tediously removing excessive free water (top‐down route). Here, the study reports on a bottom‐up route to reach a highly concentrated binary MXene‐water blend, so‐called MXene dough, by controlling the water admixture to freeze‐dried MXene flakes by exposure to water mist. The existence of a critical threshold of MXene solid content (≈60%), beyond which no dough is formed, or formed with compromised ductility is revealed. Such metallic MXene dough possesses high electrical conductivity, excellent oxidation stability, and can withstand a couple of months without apparent decay, providing that the MXene dough is properly stored at low‐temperature with suppressed dehydration environment. Solution processing of the MXene dough into a micro‐supercapacitor with gravimetric capacitance of 161.7 F g−1 is demonstrated. The impressive chemical and physical stability/redispersibility of MXene dough indicate its great promise in future commercialization. [ABSTRACT FROM AUTHOR]

Summary: Motivation: While economic growth is usually necessary to reduce poverty, it is often not sufficient. Industrialization, especially manufacturing, tends to create jobs that are more productive than in other sectors, and which pay more, thereby reducing poverty. Structure of production therefore matters as well as growth of production. Purpose: How much does industrialization mediate the relation of economic growth to poverty reduction? Methods and approach: We deploy Causal Mediation Analysis, with industrialization as the mediator. The mechanism decomposes the impact of economic growth into direct effects on poverty, and those that apply indirectly through the mediator of industry. Data comes from the Groningen Growth and Development Centre and UNU‐WIDER Economic Transformation Database (ETD) which covers 51 countries in the global South from 1990 to 2018. Findings: Economic growth directly reduces poverty, but the full impact arises from the mediating role of industrialization. Almost 50% of the impact on poverty occurs through employment in manufacturing. Policy implications: Social policies to reduce poverty will be incomplete if the production structure of economy is disregarded. Economic policy must consider the importance of industrial economic activities to amplify the impact of economic progress. On the contrary, policies promoting economic growth without creating industrial jobs will fail to offer accurate solutions to the poverty problem. [ABSTRACT FROM AUTHOR]