Search

Traffic congestion is a major concern in urban centers, as it can affect society, the environment, and the economy. There are many studies on the use of computational intelligence (CI) to improve mobility in urban centers. Some of these researches focus on developing strategies for traffic light programming, since traffic coordination is complex due to its many parameters, variables, and dynamic behavior, and also an inefficient traffic control plan can lead to increased delays and contribute to traffic congestion. Although there are many works in the literature on strategies for traffic control, there are still some contributions and gaps to be filled, especially because some studies do not consider the automatic optimization of traffic signals in real time, that is, according to the demand of vehicles on the roads, considering multiple objectives and the use of a network of intersections in their experiments. In addition, some of the proposed models are not independent of simulation to evaluate the solutions of CI algorithms, resulting in a more complex deployment in real situations. In this context, this paper presents a new method to optimize traffic light plan in a network of intersections and in real time, called Active Control of Traffic Signals (ACTS) associated with the Non-Dominated Sorting Genetic Algorithm, considering multiple objectives in the optimization process (minimizing the average delay time and the number of vehicles stops per cycle). To test the applicability of the model, a real dataset of vehicle demand collected by the Company of Transport and Traffic of Belo Horizonte (BHTrans) is loaded into the AIMSUN simulator, then the method is applied and compared with the current traffic control plan used by BHTrans. The results show that the ACTS method reduces the average vehicle delay by almost half compared to the results obtained with the current solution used by BHTrans. In real life, this means less time spent in traffic, which promotes faster traffic flow, reducing traffic congestions. [ABSTRACT FROM AUTHOR]

Intelligent traffic light control (ITLC) algorithms are very efficient for relieving traffic congestion. Recently, many decentralized multi-agent traffic light control algorithms are proposed. These researches mainly focus on improving reinforcement learning method and coordination method. But, as all the agents need to communicate while coordinating with each other, the communication details should be improved as well. To guarantee communication effectiveness, two aspect should be considered. Firstly, a traffic condition description method need to be designed. By using this method, traffic condition can be described simply and clearly. Secondly, synchronization should be considered. As different intersections have different cycle lengths and message sending event happens at the end of each traffic signal cycle, every agent will receive messages of other agents at different time. So it is hard for an agent to decide which message is the latest one and the most valuable. Apart from communication details, reinforcement learning algorithm used for traffic signal timing should also be improved. In the traditional reinforcement learning based ITLC algorithms, either queue length of congested cars or waiting time of these cars is considered while calculating reward value. But, both of them are very important. So a new reward calculation method is needed. To solve all these problems, in this paper, a new ITLC algorithm is proposed. To improve communication efficiency, this algorithm adopts a new message sending and processing method. Besides, to measure traffic congestion in a more reasonable way, a new reward calculation method is proposed and used. This method takes both waiting time and queue length into consideration. [ABSTRACT FROM AUTHOR]

Traffic congestion is becoming a serious problem with the large number of vehicle on the roads. In the traditional traffic control system, the timing of the green light is adjusted regardless of the average traffic rate at the junction. Many strategies have been introduced to solve and improve vehicle management. However, in order to handle road traffic issues, an intelligent traffic management solution is required. This article represents a self adaptive real-time traffic light control algorithm based on the traffic flow. We present a machine learning approach coupled with image processing to manage the traffic clearance at the signal junction. The proposed system utilizes single image processing via neural network and You Only Look Once (YOLOv3) framework to establish traffic clearance at the signal. We employed YOLO architectures because it is accurate in terms of mean average precision (mAP), interaction over union (IOU) values and fast in object detection tasks as well. It runs significantly faster than other detection methods with comparable performance. The average processing time of single image was estimated to be 1.3 s. Further based on the input from YOLO we estimated the 'on' time period green light for effective traffic clearance. Several real time parameters like number of vehicles (two wheelers, four wheelers), road width and junction crossing time are considered to estimate the 'on'time of green light. Moreover, we used the real traffic images to test the performance and trained the system with different dataset. Our experiments investigation reveals that the predicted vehicle counts were well matched with the actual vehicle count and proposed method apprehended an average accuracy of 81.1%. The reported strategy is self adaptive, highly accurate, fast and has the potential to be implemented in the traffic clearance at the junctions. [ABSTRACT FROM AUTHOR]

Traffic lights are an important controlling factor in traffic flows, and good policies will facilitate traffic congestion. A car's waiting time is highly related to the period in which the traffic lights are green or red; thus, a proper controlling policy reduces the waiting time and speeds up the car movement. Emergency vehicles always have a higher priority than other cars and need to reach their destination faster. In the last decade, a lot of research has been done to solve the traffic light scheduling issue using artificial intelligence techniques. Reinforcement learning with simulating human learning has the outstanding performance to solve complex problems, such as traffic lights control. In this study, a deep reinforcement learning traffic light control was implemented at a crossroad using real-time traffic information with an emphasis on emergency vehicles. The agent learns to adjust its policies to prioritize the emergency cars over the other cars. The results show less waiting time and speed up the cars' movement. It also indicates the emergency vehicles will cross the intersection with the least delay. With 200 to 600 cars and one emergency vehicle, the average delay decreases 2–16% in total using reinforcement learning. Considering more emergency vehicles, there is a 27–40% decrease in average delay for emergency vehicles. [ABSTRACT FROM AUTHOR]

Because of the population increasing so high, and traffic density remaining the same, traffic prediction has become a great challenge today. Creating a higher degree of communication in automobiles results in the time wastage, fuel wastage, environmental damage, and even death caused by citizens being trapped in the middle of traffic. Only a few researchers work in traffic congestion prediction and control systems, but it may provide less accuracy. So, this paper proposed an efficient IoT-based traffic prediction using OWENN algorithm and traffic signal control system using Intel 80,286 microprocessor for a smart city. The proposed system consists of '5' phases, namely IoT data collection, feature extraction, classification, optimized traffic IoT values, and traffic signal control system. Initially, the IoT traffic data are collected from the dataset. After that, traffic, weather, and direction information are extracted, and these extracted features are given as input to the OWENN classifier, which classifies which place has more traffic. Suppose one direction of the place has more traffic, it optimizes the IoT values by using IBSO, and finally, the traffic is controlled by using Intel 80,286 microprocessor. An efficient OWENN algorithm for traffic prediction and traffic signal control using a Intel 80,286 microprocessor for a smart city. After extracting the features, the classification is performed in this step. Hereabout, the classification is done by using the optimized weight Elman neural network (OWENN) algorithm that classifies which places have more traffic. OWENN attains 98.23% accuracy than existing model also its achieved 96.69% F-score than existing model. The experimental results show that the proposed system outperforms state-of-the-art methods. [ABSTRACT FROM AUTHOR]