Search

Phase change materials (PCMs) could be used in envelopes to moderate indoor temperature while hygroscopic materials could be used in envelopes to moderate indoor humidity. However, it remains unsolved whether these two materials are mixed to generate a better effect than single materials. Therefore, a transient model for coupled heat and moisture transfer through hygroscopic PCMs (HPCMs) was presented. The numerical cases of periodic boundary conditions and realistic weather conditions were conducted to investigate the heat and moisture transfer characteristics of three gypsum-based HPCMs containing different mass ratios of microencapsulated PCMs. Quantitative analyses were conducted to capture the effects of hygrothermal properties on heat and moisture transfer characteristics of HPCMs. The numerical results show that the mixing of PCMs and hygroscopic materials could generate a better temperature-humidity controlling effect than pure hygroscopic material, and the condensation risks inside the envelopes could also be reduced. Both the studied cases indicate that the HPCMs could be applied in building envelopes to passively moderate the indoor temperature and humidity simultaneously, reducing the building energy consumption and condensation risks inside the envelopes. The effects of hygroscopic and moisture transfer properties on temperature-control performance of HPCMs are relatively small, while the thermal properties play an important role in the improvement of temperature-humidity controlling performance of HPCMs with the increase of PCM concentration. [ABSTRACT FROM AUTHOR]

The purpose of this study is to investigate a novel exploitation approach for a mass livestock byproduct, namely sheep wool fibres. In order to fulfil this aim, wool fibre toughened epoxy composites with an amount of 2.4, 4.1 and 5.7 phr were prepared via the hot press method. Initially, mechanical assessment of the composites was executed, in order to evaluate their mechanical integrity. The flexural and shear strength tests showed that the wool fibre-epoxy composites maintain their mechanical properties for up to 4.1 phr and no degradation is detected. Subsequently, the thermal properties were tested. Thermogravimetric analysis proved that adding wool fibres as toughening agent in epoxy matrix can prolong the endurance of the material while reaching high temperatures. The coefficient of thermal conductivity decreased by 30% compared to neat epoxy, something that is also confirmed through simulation, proving that wool fibre-epoxy composites can be considered as a promising insulating material, while exploiting a natural waste. [ABSTRACT FROM AUTHOR]