Search

In this paper, NiCo2S4 was coated on the surface of WS2 of a 1T/2H mixed phase by a two-step hydrothermal method to form an in situ core–shell structure. The unique S-scheme heterojunction of the NiCo2S4@WS2 core–shell composite photocatalyst improved the easy recombination of carriers caused by the narrow band gap of NiCo2S4 and WS2, and improved the photocatalytic hydrogen production performance. The loading ratio of NiCo2S4@WS2, the addition of Eosin Y, and the pH value of TEOA were optimized. Under the optimal conditions, the hydrogen production rate reached 5.814 mmol g−1 h−1, which is about 8.55 times and 3.35 times the hydrogen evolution rates of NiCo2S4 and WS2, respectively. The composite catalyst exhibits excellent charge separation efficiency in photoelectrochemistry, PL and BET tests, carrier transport rate and large specific surface area that can provide more active sites, which are the main factors for the improvement of the hydrogen evolution performance. This paper demonstrates new design strategies to drive efficient photocatalytic hydrogen production by building in situ core–shell structures and optimizing the carrier transport paths, which will yield new insights. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is a new type of renewable energy that can meet people's growing energy needs and is environmentally friendly. In order to improve the industrial application prospects and electrochemical performance of hydrogen evolution catalysts, extensive research on transition metal materials has been carried out. Among the many catalytic materials, cobalt is an element with potential for the hydrogen evolution reaction (HER) due to its abundant reserves, low cost, and small energy barrier for H adsorption. This review classifies the latest research on cobalt-based catalysts according to the types of compound, including cobalt-based sulfides, phosphides, carbides, borides, oxides, etc., and summarizes the latest research progress of cobalt-based compound catalysts in acidic and alkaline media. Strategies to tune the properties of cobalt-based compound catalysts for high catalytic activity for HER are focused on, including structural engineering, defect engineering, and doping, etc. The advantages and limitations of each modified approach are reviewed. Not only that, but also the catalytic activity and advantages of the catalyst are evaluated by using density functional theory (DFT) calculation-related descriptors, activity evaluation parameters, etc. Finally, limitations and challenges of cobalt-based materials for HER are presented, as well as prospects for future research. This paper aims to understand the chemical and physical factors that affect cobalt-based catalysts, and to find directions for future research on cobalt-based catalysts. [ABSTRACT FROM AUTHOR]

In this paper, we present a MoP/P–Mn0.5Cd0.5S photocatalytic material (PMOMCS-Px). A novel catalyst can efficiently split water into hydrogen without precious metals. In the sacrificial agent environment, the HER (hydrogen evolution rate) of PMOMCS-P5 was 4368.25 μmol g−1 h−1 which was 11.4 times greater than the HER of Mn0.5Cd0.5S (383.19 μmol g−1 h−1), and its hydrogen production performance was better than that of Pt/Mn0.5Cd0.5S (2.0 wt% Pt). Furthermore, the hydrogen evolution performance of PMOMCS-P5 under pure water conditions was also examined, and the HER of PMOMCS-P5 was 209.76 μmol g−1 h−1, which was 20.4 times that of Mn0.5Cd0.5S (10.29 μmol g−1 h−1). Its characterization proved that the introduction of the co-catalyst MoP and P doping inhibited the recombination of e− and h+, enhanced the reduction capacity, and reduced the hydrogen precipitation reaction overpotential of PMOMCS-Px, thus enhancing the hydrogen production performance of PMOMCS-Px. Therefore, an efficient and economical photocatalyst was prepared. [ABSTRACT FROM AUTHOR]

The development of high-efficiency and low-cost photocatalysts for hydrogen production reactions is very important to solve energy problems. In this paper we study the photocatalytic H2 evolution activity of a CeO2/CoS2 heterojunction catalyst under visible light. Characterization studies such as XRD and XPS proved the successful synthesis of a CeO2/CoS2 catalyst. The composite catalyst with a CeO2 and CoS2 mass ratio of 1 : 20 had the best activity, and the hydrogen evolution rate reached 5172.20 μmol g−1 h−1. BET and UV-Vis DRS characterization showed that the introduction of CeO2 not only increased the specific surface area of the composite catalyst, but also improved the response of the photocatalyst to visible light. In addition, PL and electrochemical experiments showed that the electrons and holes of the CeO2/CoS2 catalyst could be quickly separated and transferred, thereby accelerating the kinetics of the hydrogen evolution reaction. This work provided an experimental basis for designing a composite photocatalyst with high stability and hydrogen production activity. [ABSTRACT FROM AUTHOR]

Metal halide perovskites, such as iodine methylamine lead (MAPbI3), have received extensive attention in the field of photocatalytic decomposition of HI for hydrogen evolution, due to their excellent photoelectric properties. In this paper, a new MAPbI3-based composite, MoC/MAPbI3, was synthesized. The results show that 15 wt% MoC/MAPbI3 has the best hydrogen production performance (38.4 μmol h−1), which is approximately 24-times that of pure MAPbI3 (1.61 μmol h−1). With the extension of the catalytic time, the hydrogen production rate of MoC/MAPbI3 reached 165.3 μmol h−1 after 16 h due to the effective separation and transfer of charge carriers between MoC and MAPbI3, showing excellent hydrogen evolution rate performance under visible light. In addition, the cycling stability of MoC/MAPbI3 did not decrease in multiple 4 h cycle tests. This study used the non-precious metal promoter MoC to modify MAPbI3, and provides a new idea for the synthesis of efficient MAPbI3-based composite catalysts. [ABSTRACT FROM AUTHOR]