Search

Wood bark is a structurally complex by-product of the pulp and paper industry, which focuses primarily on the valorization of structurally more regular wood xylem components. The aim of this study was the elucidation of the less valorised willow wood counterparts (whole bark, inner bark, sclerenchyma bundles, and parenchymatous tissues) by NMR spectroscopic techniques. This allowed a better understanding of the structural features of macromolecular components of bark (i.e. pectin, hemicellulose, and lignin), thus providing a base for a more rational design of the customized biochemical processes prior to chemical processing of bark. This crucial knowledge contributed to the creation of a protocol/decision tool to select tailored enzymes (discarding the slightest substrate binding) for the biological pre-treatment of bark to a state suitable for chemical pulping. Such a protocol/decision-making tool would significantly improve the efficiency of enzyme selection by 60–70% due to the specific catalytic activity of the enzymes involved. [ABSTRACT FROM AUTHOR]

This paper details the preparation of an aluminum-based organic metal complex doped with fluorine and nitrogen (2-Ml/Al–F–N). The synthesis method combines hydrothermal synthesis and calcination for modification. The catalyst was thoroughly characterized for its composition, structure, and morphology using various techniques, including XRD, FT-IR, XPS, SEM, TEM, and others. The electrochemical performance of the material was assessed using an electrochemical workstation, and gas chromatography was employed to analyze the results. DFT calculations were used to compute the material's properties and energy barrier diagram. The findings demonstrate that the catalyst exhibits a carbon nanoline morphology and showcases high catalytic activity in the CO2RR to CO. Notably, the catalyst exhibits excellent performance with a maximum current density of 14.08 mA cm−2 and a peak faradaic efficiency of 90.1% at −1.1 V vs. RHE. The active sites are predominantly located within the nanoline structure. The DFT calculations reveal that the introduction of ammonium fluoride during the synthesis process leads to the formation of a highly efficient fluorinated aluminum metal catalytic center derived from nonahydrate aluminum nitrate. This specific structure demonstrates excellent hydrogen suppression properties and effectively lowers desorption energy barriers, which enhances the CO2RR activity and promotes the electrocatalytic reduction of CO2 to CO. [ABSTRACT FROM AUTHOR]

In this paper, a novel Pt/CoP/C photo-electro synergistic catalyst was successfully synthesized by a hydrothermal method combined with phosphorus doping treatment. The addition of Vulcan XC-72R is in favor of effectively preventing agglomeration of active catalytic sites, resulting in more uniform and smaller Pt and CoP nanoparticles. The as-obtained Pt/CoP/C shows excellent photo-electro catalytic performance for the HER with simulated solar light irradiation. The optimal hydrogen production is 5384.18 mmol h−1 g−1, which is obviously higher than that of the commercial catalyst (20 wt% Pt/C: 4608.52 mmol h−1 g−1). The research results show that introducing cobalt phosphide into the Pt catalyst can improve the electrocatalytic activity and stability for the HER; in particular, the existence of Co3O4 in Pt/CoP/C leads to an efficient photo-electro catalysis under irradiation, which significantly improves the catalytic activity of Pt. The results above provide a novel strategy for the rational design of cost-effective Pt-based composites towards a fast HER. [ABSTRACT FROM AUTHOR]

The urea oxidation reaction (UOR), which possesses a low theoretical potential and superior kinetics, is an attractive substitute for the anodic oxygen evolution reaction (OER) in overall water splitting; however, the implementation of hydrogen production in overall urea splitting is impeded by the deficiency of highly efficient, durable and cost-effective catalysts. Herein, we fabricated an Ni2P–MoP2 heterostructure with a hierarchical structure grown on carbon paper (Ni–Mo–P/CP), which exhibited robust activity and outstanding durability for the electrocatalytic oxidation of urea. The Ni–Mo–P/CP catalyst possessed an ultralow potential of 1.39 V to obtain the current density of 100 mA cm−2, small Tafel slope (27 mV dec−1) and long-term durability with almost no decay within 15 h. The experimental characterization revealed that the optimized electronic structure and the synergistic effect of abundant exposed active sites in the Ni–Mo–P/CP catalyst contribute to the efficient UOR catalytic activity. This work enriches the candidate catalysts for the UOR and promotes the industrial development of hydrogen production. [ABSTRACT FROM AUTHOR]

One of the environmentally friendly methods is the intelligent utilization of natural one-dimensional nanomaterials as carriers to improve the CO2 catalytic performance of MOF materials. This paper reports an efficient composite catalyst preparation using a cheap and readily available magnesium–aluminosilicate nanometer, attapulgite (ATP), as a carrier for MOF materials. Due to its Lewis acidic site and unique alkaline pore structure, ATP exhibits excellent catalytic activity in the coupling reaction of CO2 with epoxy compounds, and its regular one-dimensional nanorod shape has tremendous potential as a carrier compared to other natural minerals. Given the diversity of MOF material types and structures, the design of this UIO-66/ATP nanocomposite catalyst provides both a new pathway for CO2 capture and conversion and a developmental space for the synthesis of such nanocomposites. [ABSTRACT FROM AUTHOR]

Sensitive detection of glucose is important for public health, but non-enzymatic glucose biosensors still face significant challenges. In this paper, a novel and sensitive non-enzymatic glucose sensor was developed by in situ preparation of CuO nanorod-supported NiCo LDH nanosheet arrays on copper foam (CuO@NiCo LDH NSAs/CF). Because the hierarchical core–shell nanostructure provides more active sites and increases the exposed surface area of the catalyst, the catalytic activity of the electrode was significantly increased. As a working electrode, the CuO@NiCo LDH NSAs/CF catalyst showed good glucose sensing performance in a linear range of 0.6 μM–3 mM and a detection limit of 0.16 μM (S/N = 3). The sensor also showed repeatable responses over a month with negligible interference, and satisfactory recoveries with real human serum samples. [ABSTRACT FROM AUTHOR]

In this paper, ultrathin layers of carbon nitride were obtained by dissolving urea in different amounts of water and used as a carrier to prepare catalysts for formic acid dehydrogenation. The catalytic activity of the carbon nitride supported Pd catalyst in formic acid dehydrogenation was investigated. The ratio of urea to water played a key role in the type and content of nitrogen-containing functional groups, and then enhanced the catalytic performance by regulating the electronic properties of Pd. The Pd/CN-U1W5 catalyst exhibited excellent catalytic activity for the production of hydrogen from formic acid with an initial TOF of 1058 h−1 at 348 K. It was found that the high catalytic performance of the catalyst could be attributed to the strong interaction between Pd nanoparticles and pyridinic N, small Pd nanoparticle size and highly dispersed Pd nanoparticles. [ABSTRACT FROM AUTHOR]

The development of productive and sustainable bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) plays an important role in the commercial evolution of metal–air batteries. In this paper, a low-temperature molten salt template method was adopted to synthesize the composite of CoS2 and nitrogen-doped carbon (CoS2/NC) without the protection of inert gas. The structural characterization studies show that the specific surface area (SSA) and crystal growth kinetics are increased and effectively improved, respectively, by the composite of CoS2 and NC. The as-synthesized CoS2/NC composite demonstrates outstanding bifunctional catalytic activity in alkaline electrolytes and exhibits a half-wave potential (E1/2) of 0.854 V (vs. RHE) and an overpotential of only 220 mV for the OER at a current density of 10 mA cm−2 (η10). Simultaneously, CoS2/NC also exhibits excellent electrochemical stability. Additionally, density functional theory (DFT) calculations have manifested that the synergistic effect of CoS2 and NC results in a remarkable enhancement in the bifunctional catalytic performance of the composite materials. This study offers a new pathway and theoretical guidance for the fabrication of efficient bifunctional electrocatalysts. [ABSTRACT FROM AUTHOR]

The development of a bifunctional ruthenium-based electrocatalyst that can efficiently and economically drive both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) remains challenging because ruthenium species can undergo severe agglomeration during preparation which can significantly reduce the catalytic activity. Constructing supported metal catalysts can not only improve the stability of Ru but also improve the catalytic performance by adjusting the electronic structure, which is an effective way to solve the current challenges. In this paper, Ru-loaded MoO2/MoO3 heterostructures (Ru–MoOx) with oxygen vacancies were successfully synthesized by controlling the annealing temperature. This special structure can effectively tune the electronic structure, enhance the electrical conductivity and increase the active sites, thus improving the catalytic activity of the catalyst. Performance studies have shown that Ru–MoOx exhibits excellent HER and OER performance in alkaline media. And it is not surprising that the overall water decomposition performance of Ru–MoOx is also excellent, requiring only a cell voltage of 1.54 V to reach 10 mA cm−2. [ABSTRACT FROM AUTHOR]

In this paper, a 3D porous polycalix functionalized with a dual Brønsted–Lewis acidic double-charged DABCO-based ionic liquid group (PC4RA@[SiPrDABCO@BuSO3H](FeCl4)) was synthesized using multiple steps, characterized, and then evaluated by spiro formation for catalytic activity. Initially, the polymeric support was modified using the silylation of its hydroxy groups with (3-chloropropyl)-trimethoxysilane as an organo-silane linker to develop PC4RA-SiPrCl. Then, it was post-functionalized using bi-functional acidic IL groups bearing double-charged diazoniabi-cyclo[2.2.2]octane tetrachloro-ferrate(III) with moving active sites of SO3H groups to deliver PC4RA@[SiPrDABCO@BuSO3H](FeCl4). In the next step, the characterization of the designed catalyst was directed by applying FT-IR, EDX, elemental mapping, WPXRD, LPXRD, FE-SEM, STA, and TEM techniques. The catalytic performance of the porous polymeric system was confirmed using the formation of spiro-fused[4H-pyran] as a highly recyclable and stable di-cationic polymer-supported acidic IL under mild conditions. [ABSTRACT FROM AUTHOR]

In this paper, a cyclic (CuIpz)3·CH3CN (1) precursor and a mixed-valence pentanuclear complex Cu I3 Cu II2 (OH)pz6·CH3CN (2) have been synthesized and structurally characterized by single-crystal X-ray diffraction, where pzH = 4-chloro-3,5-diphenylpyrazole. The excellent catalytic activity of 2 has been demonstrated in the chemical fixation of CO2 into value-added cyclic carbonates, which can be carried out at ambient pressure and room temperature along with ultra-high yield and perfect steric hindrance tolerance. Based on density functional theory (DFT) calculations and comparison with the catalytic performance of 1, it is proposed that the coordinatively unsaturated CuII atoms of 2 are probably the active sites for this catalytic reaction. [ABSTRACT FROM AUTHOR]

The development of noble-metal-free electrocatalysts with high catalytic efficiency, low cost, and high durability in pH-universal media is encountering a bottleneck in practical applications. In this paper, Ni@MoN-700 coral hybrids were prepared using hydrogen evolution reaction (HER) catalysts, which were synthesized by a high-temperature reduction of NiMoO4 nanorods with urea. It was found that the annealing temperature seriously affects the surface morphology and chemical composition of the catalysts. Besides, structural reorganization occurred during the HER, which involved the joining of pyrrolic N, metal nitrogen, Mo3+, and Mo6+, governing the HER performance. Also, during the HER, Ni and Mo could synergistically improve the overall catalytic activity of the catalysts, via electronic interactions. These advantages endow Ni@MoN-700 with exceptional endurance and great HER activity, with a low overpotential of 30 mV and 76 mV at 10 mA cm−2 in alkaline and acidic media. These characteristics are similar to those of Pt under alkaline conditions. NiMoN catalysts show unusual activity and long-term stability, indicating a wide range of potential applications. [ABSTRACT FROM AUTHOR]

The development of efficient and stable non-precious-metal-based electrocatalysts is essential for practical water splitting applications. The electrolysis of water for hydrogen production is a green and efficient method, while urea electrolysis can improve energy conversion efficiency. In this paper, W–Ni3S2/NiS catalysts with heterogeneous structures were synthesized via a one-step hydrothermal method using a W-doping-induced phase transition strategy. The doping of W modulates the morphology of the catalyst, which can form uniform nanorod arrays and improve the activity of the electrocatalyst. In an alkaline solution of 1 M KOH and 0.5 M urea, W–Ni3S2/NiS requires a potential of only 1.309 V to achieve a current density of 10 mA cm−2. An electrolyzer containing urea with W–Ni3S2/NiS as both the cathode and anode can drive a current density of 10 mA cm−2 with a potential of only 1.569 V and has relatively good stability after testing for 20 h. Experimental results show that the improvement in the catalytic activity is due to the rapid charge transfer, exposure of more active sites and better conductivity. Density functional theory calculations show that the W–Ni3S2 material exhibits higher urea adsorption energy, indicating that urea is preferentially adsorbed on its surface. The NiS material shows more state density near the Fermi level, indicating that the introduction of this material enhances the conductivity of the W–Ni3S2/NiS material. The synergistic catalysis of the two materials promoted the improvement of the catalytic activity. This work provides new ideas for the development of highly efficient and stable catalysts by means of doping and interface construction. [ABSTRACT FROM AUTHOR]

Designing counter electrodes (CEs) with high efficiency and understanding the mechanism of dye-sensitized solar cells (DSSCs) are still challenges. In this paper, we synthesized K-doped molybdenum disulfide (K-MoS2) with few layers and it has a great enhancement effect on the electrocatalytic activity compared to pure MoS2 CE and reference Pt CE. A dual electron-path model is proposed to explain the mechanism, which is supported by first-principles calculations. When an electron in MoS2 is transferred to the triiodide, the K atoms can act as an electron reservoir to provide another electron in a short time to improve the catalytic activity. So the proposed dual-electron effect in this paper is helpful to understand the charge transfer mechanism on the interfaces of these CEs and may be crucial for obtaining high photoelectric efficiencies in DSSCs. [ABSTRACT FROM AUTHOR]

Fe, N co-doped carbon electrocatalyst is one of the most attractive alternatives to Pt/C catalysts due to its high catalytic activity, excellent stability and low cost. However, obtaining stable and efficient Fe, N co-doped carbon oxygen reduction reaction (ORR) catalysts based on simple processes is still a challenge. Herein, Fe, N co-doped porous carbon (Fe–N–C) with an open macroporous frame structure is prepared by using inorganic molten salts (FeCl3·6H2O and ZnCl2) and ethylenediaminetetraacetic acid as the template and nitrogen-containing carbon precursor, respectively. The open pore structure of the Fe–N–C material precisely tailored with the inorganic molten salt template exhibits high specific surface area (676.5 m2 g−1) and appropriate pore size, which can promote oxygen adsorption and expand the oxygen reduction interface, resulting in the acceleration of the electron/charge transfer processes and an improved electrocatalytic performance. The optimized Fe3–N–C-800 electrocatalyst exhibits good catalytic activity for ORR, such as high onset potential of 0.998 V and half wave potential of 0.84 V in alkaline media, as well as high stability and methanol tolerance. Furthermore, a novel Zn–air battery assembled with carbon paper containing Fe3–N–C-800 electrocatalyst as air cathode shows high open-circuit voltage (1.485 V), high specific capacity (870 mA h g−1 at 10 mA cm−2), excellent reversibility and stability. The proposed synthetic strategy provides new opportunities to design and construct carbon frame materials with the desired open macroporous structure to improve their electrocatalytic performance. [ABSTRACT FROM AUTHOR]

Chemical vapor deposition (CVD) and impregnation (IM) methods were applied in the preparation of novel Fe/LTA (Linde Type A) zeolite membrane/paper-like sintered stainless steel fiber (Fe/LTA/PSSF) catalysts for acetone oxidation. The catalysts were characterized using various techniques, such as actual iron loading (AAS), surface morphology (SEM), phase composition and crystallite size (XRD), specific surface area (BET), valence state (XPS) and reducibility (H2-TPR), to investigate the effects of the calcination process, iron loading, preparation methods and supports on their catalytic activity. The calcined catalysts were more active than the non-calcined catalysts in the catalytic oxidation of acetone due to the different oxidation states of the deposited metal species. The catalysts prepared by CVD with an Fe loading of 2.29% exhibited similar activity to the IM-prepared catalysts with Fe loadings of 4.42% and 9.69%, which may be attributed to the superior dispersion of the active Fe2O3 phases, the smaller size of metal oxide and the increased ability for oxygen storage. Among the IM-prepared catalysts, Fe/LTA/PSSF-IM-2 with an Fe loading of 4.42% exhibited the lowest T90 of 230 °C. Additionally, the catalysts coated on LTA/PSSF showed higher activity and contact efficiency (T90 of 249 °C) compared to those on granular zeolite (T90 of 318 °C). [ABSTRACT FROM AUTHOR]

Liquid phase oxidation of 2-methylnaphthalene (2-MN) is a common synthetic route for the preparation of 2-methyl-1,4-naphthoquinone (2-MNQ). Metal-free carbon materials doped with heteroatoms have been proven to have excellent catalytic potential in various reaction fields. In this paper, the catalytic performance of N, F co-doped benzoxazine carbon materials for the selective oxidation of 2-MN was studied. The results show that the catalyst obtained at a carbonization temperature of 700 °C has the best catalytic performance. Under optimized conditions, the 2-MN conversion is 97.9%, and the 2-methyl-1,4-naphthoquinone selectivity is 84.3%. In addition, this catalyst still exhibits good catalytic activity after five cycles. Based on the experimental and characterization results, graphitic nitrogen species play a key role in the catalytic reaction and there is an almost linear relationship between the F content and the selectivity of 2-MNQ. This work provides a greener and more efficient method for the preparation of 2-MNQ with N/F co-doped mesoporous carbon. [ABSTRACT FROM AUTHOR]

To solve the problem of excessive energy consumption in the process of catalytic water splitting, it is quite essential to exploit high-activity and low-cost electro-catalysts. The present paper proposes a highly catalytically active Ni/Fe hydroxide electro-catalyst for the oxygen evolution reaction (OER), which is in situ formed on the surface of the stainless steel fiber felt using a sacrificial template by adding the oxidizing agent K2S2O8 to the alkaline solution under mild conditions. The electrode prepared using this simple one-step chemical oxidation method obviously shows enhanced catalytic activity for the OER. The overpotentials at 10 mA cm−2 are only 214 mV and 263 mV in KOH and Na2CO3/NaHCO3 solutions, respectively. In addition, the potential and morphology of the electrode remain stable for 180 h at 10 and 100 mA cm−2 in the Na2CO3/NaHCO3 system, demonstrating its ultra-high stability. This new route to prepare OER electrode materials has a promising bright application prospect for large-scale production. [ABSTRACT FROM AUTHOR]

In 2011, Zhang's research team, in cooperation with Li and Liu, reported the Pt1/FeOx atomically dispersed catalysts for the first time in the world, and based on this, proposed the concept of "single-atom catalysts". Single-atom catalysts (SACs) have a wide range of industrial application prospects in the catalytic synthesis of fine chemicals due to their high atomic utilization rate and special catalytic activity. With the deepening of the research, the preparation methods of SACs emerge in an endless stream, but it is still an urgent problem to realize the industrial production of highly stable SACs prepared in small batches (gram level) or even in large batches (kilogram level). In this review paper, several typical solvent-free green synthetic strategies (e.g., ball milling, physical mixing, gas migration, and pyrolyzing coordination polymers (including MOFs)) for the batch preparation of SACs are introduced. And typical catalytic application of SACs in green synthesis of fine chemicals by means of oxidation reaction, hydrogenation reaction, coupling reaction and other reactions are also introduced. This is the first review paper focusing on the mass preparation techniques of SACs and their applications in fine chemicals production. [ABSTRACT FROM AUTHOR]

Hydrogen (H2) is a new type of renewable energy that can meet people's growing energy needs and is environmentally friendly. In order to improve the industrial application prospects and electrochemical performance of hydrogen evolution catalysts, extensive research on transition metal materials has been carried out. Among the many catalytic materials, cobalt is an element with potential for the hydrogen evolution reaction (HER) due to its abundant reserves, low cost, and small energy barrier for H adsorption. This review classifies the latest research on cobalt-based catalysts according to the types of compound, including cobalt-based sulfides, phosphides, carbides, borides, oxides, etc., and summarizes the latest research progress of cobalt-based compound catalysts in acidic and alkaline media. Strategies to tune the properties of cobalt-based compound catalysts for high catalytic activity for HER are focused on, including structural engineering, defect engineering, and doping, etc. The advantages and limitations of each modified approach are reviewed. Not only that, but also the catalytic activity and advantages of the catalyst are evaluated by using density functional theory (DFT) calculation-related descriptors, activity evaluation parameters, etc. Finally, limitations and challenges of cobalt-based materials for HER are presented, as well as prospects for future research. This paper aims to understand the chemical and physical factors that affect cobalt-based catalysts, and to find directions for future research on cobalt-based catalysts. [ABSTRACT FROM AUTHOR]

In this paper, information on interactions in the Au/CeO2 (and Au/Ce0.9Ln0.1O1.95, Ln = La, Gd and Yb) system has been presented from a novel point of view. This work focuses on showing the (nano)Au–(hierarchical/nano)CeO2 interaction. Hierarchically 3D organized ceria-based mixed oxides (tube-like macroparticles) were prepared by a wet chemical method. Decoration of macroparticles was successfully carried out using the deposition–precipitation method. It was observed that the predetermined shape of the investigated macroparticles and the uniform distribution of gold nanoparticles were not dependent on the ion radius of the Ln3+ dopant. It has been noted that the hierarchical materials, investigated in this work, exhibit sensational red-ox properties. It was concluded that the presence of a 3D structure of the catalysts results in a strong lowering of the cerium ion reduction temperature (during H2-TPR) down to temperatures below zero (−8 °C). The materials tested in this work also turned out to be catalytically active in the propane oxidation process. The temperature of half propane oxidation (T50 = 399 °C) obtained for Au/CeO2 was 96 °C lower than that for the undecorated support. Moreover, introduction of a small amount of La3+ and Yb3+ ions (in a 1 : 1 ratio) into the ceria matrix led to further improvement of the propane oxidation performance (T50 = 361 °C). What is interesting, such an effect was not observed for the Au/Ce0.9Gd0.1O1.95 sample. This makes us believe that the catalytic activity of the decorated systems in this process depends not only on the presence of Au nanoparticles on the support surface but also on the type of deformation in the CeO2 network. Unfortunately, the hierarchical Au/CeO2 (and Au/Ce0.9Ln0.1O1.95) systems lost their activity very quickly due to the growth of gold nanoparticles at quite high reaction temperatures, but decorating macroparticles with gold nanoparticles significantly improves the selectivity of the propane oxidation process. [ABSTRACT FROM AUTHOR]

Entangling strands in a well-ordered manner can produce useful effects, from shoelaces and fishing nets to brown paper packages tied up with strings. At the nanoscale, non-crystalline polymer chains of sufficient length and flexibility randomly form tangled mixtures containing open knots of different sizes, shapes and complexity. However, discrete molecular knots of precise topology can also be obtained by controlling the number, sequence and stereochemistry of strand crossings: orderly molecular entanglements. During the last decade, substantial progress in the nascent field of molecular nanotopology has been made, with general synthetic strategies and new knotting motifs introduced, along with insights into the properties and functions of ordered tangle sequences. Conformational restrictions imparted by knotting can induce allostery, strong and selective anion binding, catalytic activity, lead to effective chiral expression across length scales, binding modes in conformations efficacious for drug delivery, and facilitate mechanical function at the molecular level. As complex molecular topologies become increasingly synthetically accessible they have the potential to play a significant role in molecular and materials design strategies. We highlight particular examples of molecular knots to illustrate why these are a few of our favourite things. [ABSTRACT FROM AUTHOR]

FeCo2O4 is a potential OER catalyst, but its catalytic activity still needs to be further improved due to its poor electrical conductivity and low material utilization. In this paper, we construct oxygen-vacancy-rich two dimensional FeCo2O4 nanosheet materials using a liquid-phase reduction strategy. Benefiting from its large specific surface area, numerous surface catalytic sites, enhanced electrical conductivity, and modulated electronic structure, the catalyst exhibits an overpotential of only 270 mV at a current density of 10 mA cm−2, which is lower than that of the original FeCo2O4 nanosheets (420 mV). At the same time, the catalyst can run steadily for 20 hours without obvious decay. [ABSTRACT FROM AUTHOR]

Among rare earth oxides (REO), mixed-valence praseodymium oxide (Pr3+/Pr4+) has the highest O mobility and very promising applications in multiphase catalysis. In this paper, Pd-loaded praseodymium oxide nanotubes were successfully prepared by immobilizing Pd nanoparticles on modified carriers. XPS characterization showed that the electron transfer process during the reaction could be regulated by changing the Pr3+/Pr4+ ratio of praseodymium oxide. Importantly, the H2-PrxOy carrier surface has much higher Pd electron density, and the electron-rich Pd nanoparticles make it easier to break the C–Br bond and transfer electrons from Pd to C and Br atoms, leading to the formation of ArPdIIBr intermediate complexes. In the Suzuki coupling reaction, Pd/H2-PrxOy exhibited higher catalytic performance under mild conditions. There is a strong correlation between the surface properties of the carriers and the catalytic activity of the Pd nanocatalysts. This provides a new strategy for the preparation of Suzuki coupling reaction catalysts. [ABSTRACT FROM AUTHOR]

Exploring active catalyst components is very important to develop high-performance and highly stable ORR electrocatalysts to replace costly Pt-based catalysts, though it remains an ongoing challenge. In this paper, three ORR catalysts with different active components were obtained by calcination of different proportions of mixed precursors simply and delicately. Among them, precursor 1 (bimetallic polymer Fe/Zn-ZIFs@ZnCO3) played the role of a self-sacrificing template, while precursor 2 (an N, P-co-doped polymer) played the role of a volatile atmosphere. Precursor 2 also embedded N and P heteroatoms into the carbon framework during high-temperature volatilization, which resulted in subtle changes in the active catalyst components. Finally, a hybrid of metal Fe and α-Fe2O3 nanoparticles embedded in N, P-codoped carbon nanotubes with many separated gullies (named α-Fe2O3/Fe@NPC) exhibited excellent ORR catalytic activity in an alkaline solution as compared to commercial Pt/C. This work provides a new strategy for designing controllable active components using volatile precursors. [ABSTRACT FROM AUTHOR]

This paper mainly studied the influence of the Si/Al ratio on the performance of the Cu/SSZ-13 catalyst synthesized by the ion exchange method. NH3-SCR experimental results show that the catalyst SAR10 has the best catalytic performance, and it can maintain a 100% conversion rate in the range of 250 °C to 600 °C. Although SAR6 samples with low Si/Al ratios have abundant active centers, their low temperature activity is poor due to their poor crystallinity. The decrease of the number of active sites available for exchange in the SAR25 sample with too high an Si/Al ratio results in a decrease in catalytic activity throughout the temperature range. The results of the in situ DRIFTS experiment show that the order of the number of Lewis acid sites and the content of monodentate nitrate adsorption sites is the same as the order of catalytic activity. [ABSTRACT FROM AUTHOR]

In this paper, a Co--Fe LDO catalyst was prepared by combining K2Cr2O7 and Cr(NO3)3 to modify the LDH precursor. The catalytic activity of NOx and o-DCB was systematically studied, and the effect of gas composition on the catalytic activity was investigated. The prepared Cr (0.25)/Co--Fe LDO catalyst showed the best catalytic performance, with conversion efficiencies of NOx and o-DCB of 89.0% and 81.6% at 250 °C, respectively. The catalysts were characterized by XRD, BET, SEM, XPS, H2-TPD and NH3-TPD to explore the reaction activity. In addition, the interaction between NH3-SCR and o-DCB oxidation was investigated by changing the gas atmosphere. The results showed that the inhibition at low temperature (< 200 °C) could be attributed to the residues of the by-products of incomplete oxidation. The further oxidation of NO to NO2, and the dissociation of NH3 are the reasons for the mutual promotion of the two reactions in the middle and high temperature sections. Water vapor has little effect on the reaction and the introduction of SO2 will cause irreversible inactivation of the catalyst. [ABSTRACT FROM AUTHOR]

CeO2-based nanomaterials have received tremendous attention due to their variety of applications. This paper is focused on the recent advances in facet-controlled CeO2-based nanomaterials by the hydrothermal method. CeO2-based nanomaterials with controllable size and exposed facets can be prepared by adjusting the reaction parameters. Moreover, doping and loading metals can improve the oxygen storage capacity (OSC) of CeO2 and its catalytic activity. Various research studies on catalytic applications such as CO oxidation, water–gas shift reaction (WGSR), decomposition of hydrocarbons, and photocatalytic reaction have been carried out to exhibit the high potential of facet-controlled CeO2 nanomaterials. This review will provide readers with various ideas for facet-controlled CeO2-based nanomaterials. [ABSTRACT FROM AUTHOR]

In this paper, we present four Co-MOFs using R-substituted isophthalic acid (R-H2BDC, R = H, OH and COOH) along with trigonal n-TBT (n = 3 or 4) as organic ligands. These Co-MOFs are formulated as {[Co(1,3-BDC)(4-TBT)2/3]·(H2O)(DMF)1.5}n (Co-MOF-1), {[Co(HO-BDC)(4-TBT)]·(EtOH)2(DMF)2}n (Co-MOF-2), {[Co(HO-BDC)(4-TBT)2/3]·(H2O)3(MeOH)3(DMA)}n (Co-MOF-3) and {[Co3(BTC)2(3-TBT)2(H2O)2]·(H2O)2(EtOH)5(DMA)1.5}n (Co-MOF-4), where H2BDC = isophthalic acid, OH–H2BDC = 5-hydroxyisophthalic acid and H3BTC = 1,3,5-tricarboxybenzene, 4-TBT = 1,3,5- tris(4-pyridyl)benzene and 3-TBT = 1,3,5-tris(3-pyridyl)benzene. Co-MOF-1, 2 and 3 are constructed from the dimeric Co2(COO)2 unit and exhibit 3D frameworks. In Co-MOF-4, the dimeric Co2(COO)2 unit and single nuclear CoII center are connected by BTC3− and 3-TBT ligands into a 3D network. The catalytic experiments revealed that four Co-MOFs can catalyze the oxidative coupling reaction of benzyl alcohols and aniline to imines with good to excellent conversions under solvent-free conditions and an air atmosphere. Co-MOF-4 exhibited the best catalytic performance and the catalyst could be reused for at least five cycles without losing its structural integrity and catalytic activity. [ABSTRACT FROM AUTHOR]

This paper describes the synthesis, and structural and spectroscopic characterizations of two doubly bridged dicopper(II) complexes, [Cu2(μ-H2L)(μ-OMe)](ClO4)4·2H2O (1) and [Cu2(μ-L)(μ-OH)](ClO4)2 (2), with a binucleating ligand (HL) derived from the Schiff base condensation of DFMP and N,N-dimethyldipropylenetriamine, and their biomimetic catalytic activities were related to CAO and phenoxazinone synthase using 3,5-di-tert-butylcatechol and o-aminophenol (OAPH), respectively, as model substrates. Structural studies reveal that the major differences in these structures appear to be from the distinct roles of the tertiary amine groups of the ligands, which are protonated in 1, whereas it coordinates the metal centers in 2. Magnetic studies disclose that two copper(II) centers are strongly antiferromagnetically coupled with slightly different J values, which is further interpreted and discussed. They exhibited very different biomimetic catalytic activities; whereas 2 is an efficient catalyst, complex 1 showed somewhat lower substrate oxidation. The higher reactivity in 2 is rationalized by the strong involvement of the tertiary amine group of the Schiff base ligand, where the substrate oxidation is favored because of the transfer of protons from the substrate to the tertiary amine group, showing the importance of the functional groups in proximity to the bimetallic active site. Emphasis was also given to probing the binding mode of the substrate using an electronically deficient tetrabromomocatechol (Br4CatH2) and the isolated compound [Cu6(μ-HL)2(μ-OH)2(Br4Cat)4](NO3)2·4H2O (3) which suggests that monodentate asymmetric binding of 3,5-di-tert-butylcatechol and OAPH occurs during the course of the catalytic reaction. [ABSTRACT FROM AUTHOR]

Precious metal nanoparticles (NPs) are attractive for use in the field of catalysis because of their precisely controlled sizes and shapes. However, NPs exhibit insufficient anti-sintering properties under common operating conditions due to their poor thermal stability at elevated temperatures. In this paper, the preparation of noble metallic NPs (Pd and Au) incorporated inside the pores of an SBA-15 support via a sol-immobilization method, which prevents their aggregation, is reported. The Pd NPs retain their size of ∼5 nm within the channels of SBA-15, even after aging at 800 °C for three days under an air atmosphere. However, Au NPs aggregated at a temperature of calcination above 500 °C. Using a set of characterization methods comprising XRD, STEM, HRTEM, TPR, and DRIFTS analysis, it is revealed that Pd on SBA-15 exhibits better anti-sintering properties than the Au supported system. The catalytic activity and durability of M/SBA-15 (M: Pd or Au) catalysts were studied using CO oxidation with and without steam (10 vol%). Interestingly, a hydrothermally treated (Pd/SBA-15-750-H2O-3d) catalyst leads to the partial re-dispersion of Pd. This helps to attain smaller particles of ∼1.6 nm, which play a prominent role in the catalytic performance. This work provides insight into the design of sintering-resistant metal catalysts, which would be suitable for industrial applications under harsh conditions. [ABSTRACT FROM AUTHOR]

Homogenization of heterogeneous catalysts is a valuable and interesting research topic. Porous polypyridine-oxadiazole (PPO), as not only a carrier but also a ligand, was designed and synthesized from pyridine-oxadiazole and 1-iodo-4-vinylbenzene. Iridium was anchored onto the skeleton of this polymer (ligand) through coordination bonds. This porous polypyridine-oxadiazole iridium catalyst (PPO-Ir) was clearly characterized by XRD, BET, EDS, HRTEM, SEM, and XPS, and revealed high catalytic activity for the reaction of dimethyl-6-aminouracil with benzyl alcohols, 1,3-dimethylbarbituric acid with benzyl alcohols and 2-aminobenzylamine and benzyl alcohols through dehydrogenation and the borrowing hydrogen strategy with alcohol or water as the solvent. In addition, this PPO-Ir catalyst could be recycled and reused without a manifest loss of catalytic activity for at least five times and revealed potential application value. The mechanism explorations were further conducted to clarify this PPO-Ir and these transformations. [ABSTRACT FROM AUTHOR]