Search

Soft robotics faces challenges in attaining control methods that ensure precision from hard-to-model actuators and sensors. This study focuses on closed-chain control of a segment of PAUL, a modular pneumatic soft arm, using elastomeric-based resistive sensors with negative piezoresistive behaviour irrespective of ambient temperature. PAUL's performance relies on bladder inflation and deflation times. The control approach employs two neural networks: the first translates position references into valve inflation times, and the second acts as a state observer to estimate bladder inflation times using sensor data. Following training, the system achieves position errors of 4.59 mm, surpassing the results of other soft robots presented in the literature. The study also explores system modularity by assessing performance under external loads from non-actuated segments. [ABSTRACT FROM AUTHOR]

Vector control of an induction machine (IM) is typically performed by using cascade control structures with conventional linear proportional–integral (PI) controllers, the inner loop being designed for current control and the outer loop for rotor flux and speed control. In this paper, starting with the dq model of the IM, advanced control algorithms are proposed for the two control loops of the cascade structure. For the current inner loop, after the decoupling of the two dq currents, predictive control algorithms are employed to independently control the currents, considering the constraints imposed by the electrical signal physics limitations. Since the outer loop has a nonlinear affine multivariable plant model, a homotopy-based variant of feedback linearization is used to obtain a nonsingular decoupling matrix of the feedback transformation even when the rotor flux is zero at the start-up of the motor. During the continuous variation in the homotopy parameter, the plant model is variable and, for this reason, model-free algorithms are used to control the flux and speed of the IM due to their capabilities to manage complex dynamics from data without requiring knowledge of the plant model. The performances of the proposed cascade control strategy with advanced algorithms in the two loops were tested by simulation and compared with those obtained with conventional PI controllers, resulting in better dynamic behavior for predictive and model-free control. [ABSTRACT FROM AUTHOR]

ANNs have become a cornerstone in efficiently managing building energy management systems (BEMSs) as they offer advanced capabilities for prediction, control, and optimization. This paper offers a detailed review of recent, significant research in this domain, highlighting the use of ANNs in optimizing key energy systems, such as HVAC systems, domestic water heating (DHW) systems, lighting systems (LSs), and renewable energy sources (RESs), which have been integrated into the building environment. After illustrating the conceptual background of the most common ANN architectures for controlling BEMSs, the current work dives deep into relative research applications, thereby exhibiting their methodology and outcomes. By summarizing the numerous impactful applications during 2015–2023, this paper categorizes the predominant ANN-based techniques according to their methodological approach, specific energy equipment, and experimental setups. Grounded in the different perspectives that the integrated studies illustrate, the primary focus of this paper is to evaluate the overall status of ANN-driven control in building energy management, as well as to offer a deep understanding of the prevailing trends at the building level. Leveraging detailed graphical depictions and comparisons between different concepts, future directions, and fruitful conclusions are drawn, and the upcoming innovations of ANN-based control frameworks in BEMSs are highlighted. [ABSTRACT FROM AUTHOR]

Given the challenges associated with accurately modeling complex nonlinear systems with time delays in industrial processes, this paper introduces an advanced model-free control algorithm that combines data-driven and model-driven approaches. Initially, an enhanced algorithm for multi-innovation model-free control, incorporating error feedback, is presented based on the error feedback principle. Subsequently, a novel control strategy is introduced by delving into PID neural network (NN) recognition and control theory, merging PID NN control with multi-innovation feedback control. Through meticulous mathematical derivation, the proposed strategy is proven to ensure system stability. Compared with traditional NN PID controllers, the convergence rate of the proposed scheme is 50 s faster and the steady-state errors are limited to ±1. [ABSTRACT FROM AUTHOR]

Effective control of rehabilitation robots is of paramount importance and requires increased attention to achieve a fully reliable, automated system for practical applications. As the domain of robotic rehabilitation progresses rapidly, the imperative for precise and dependable control mechanisms grows. In this study, we present an innovative control scheme integrating state-of-the-art machine learning algorithms with traditional control techniques. Our approach offers enhanced adaptability to patient-specific needs while ensuring safety and effectiveness. We introduce a model-free feedback linearization control method underpinned by deep neural networks and online observation. While our controller is model-free, and system dynamics are learned during training phases, we employ an online observer to robustly estimate uncertainties that the systems may face in real-time, beyond their training. The proposed technique was tested through different simulations with varying initial conditions and step references, demonstrating the controller's robustness and adaptability. These simulations, combined with Lyapunov's stability verification, validate the efficacy of our proposed scheme in effectively controlling the system under diverse conditions. [ABSTRACT FROM AUTHOR]

The efficient control of HVAC devices in building structures is mandatory for achieving energy savings and comfort. To balance these objectives efficiently, it is essential to incorporate adequate advanced control strategies to adapt to varying environmental conditions and occupant preferences. Model-free control approaches for building HVAC systems have gained significant interest due to their flexibility and ability to adapt to complex, dynamic systems without relying on explicit mathematical models. The current review presents the recent advancements in HVAC control, with an emphasis on reinforcement learning, artificial neural networks, fuzzy logic control, and their hybrid integration with other model-free algorithms. The main focus of this study is a literature review of the most notable research from 2015 to 2023, highlighting the most highly cited applications and their contributions to the field. After analyzing the concept of each work according to its control strategy, a detailed evaluation across different thematic areas is conducted. To this end, the prevalence of methodologies, utilization of different HVAC equipment, and diverse testbed features, such as building zoning and utilization, are further discussed considering the entire body of work to identify different patterns and trends in the field of model-free HVAC control. Last but not least, based on a detailed evaluation of the research in the field, the current work provides future directions for model-free HVAC control considering different aspects and thematic areas. [ABSTRACT FROM AUTHOR]

Predictive control offers many advantages such as simple design and a systematic way to handle constraints. Model predictive control (MPC) belongs to predictive control, which uses a model of the system for predictions used in predictive control. A major drawback of MPC is the dependence of its performance on the model of the system. Any discrepancy between the system model and actual plant behavior will greatly affect the performance of the MPC. Recently, model-free approaches have been gaining attention because they are not dependent on the system model parameters. To obtain the advantages of both a model-free approach and predictive control, model-free predictive control (MFPC) is being explored and reported in the literature for different applications such as power electronics and electric drives. This paper presents an overview of model-free predictive control. A comprehensive review of the application of MFPC in power converters, electric drives, power systems, and microgrids is presented in this paper. Moreover, challenges, opportunities, and emerging trends in MFPC are also discussed in this paper. [ABSTRACT FROM AUTHOR]

In this article, a model-free control (MFC) using super twisting nonlinear fractional order sliding mode for aerodynamic heating ground simulation of hypersonic vehicles (AHGSHV) is proposed. Firstly, the mathematical model of AHGSHV is built up. To reduce order and simplify the dynamic model of AHGSHV, an ultra-local model of MFC is taken into consideration. Then, time delay estimation can be used to estimate systematic uncertainties and external unknown disturbances. On the basis of the original fractional order sliding mode surface, the nonlinear function fal is introduced to design the nonlinear fractional order sliding mode surface, which can guarantee stability, increase convergence rate, and reduce static error and saturation error. In addition, the super twisting reaching law is used to improve the control performance of the reaching phase, resulting from the existence of sign function in the integral term, and it can effectively reduce the high-frequency chattering. Moreover, the Lyapunov function is used to prove the stability of the whole system. Finally, several numerical simulations show that the designed controller has more advantages than others. [ABSTRACT FROM AUTHOR]

In this study, a novel Multivariable Adaptive Neural Network Controller (MANNC) is developed for coupled model-free n-input n-output systems. The learning algorithm of the proposed controller does not rely on the model of a system and uses only the history of the system inputs and outputs. The system is considered as a 'black box' with no pre-knowledge of its internal structure. By online monitoring and possessing the system inputs and outputs, the parameters of the controller are adjusted. Using the accumulated gradient of the system error along with the Lyapunov stability analysis, the weights' adjustment convergence of the controller can be observed, and an optimal training number of the controller can be selected. The Lyapunov stability of the system is checked during the entire weight training process to enable the controller to handle any possible nonlinearities of the system. The effectiveness of the MANNC in controlling nonlinear square multiple-input multiple-output (MIMO) systems is demonstrated via three simulation studies covering the cases of a time-invariant nonlinear MIMO system, a time-variant nonlinear MIMO system, and a hybrid MIMO system, respectively. In each case, the performance of the MANNC is compared with that of a properly selected existing counterpart. Simulation results demonstrate that the proposed MANNC is capable of controlling various types of square MIMO systems with much improved performance over its existing counterpart. The unique properties of the MANNC will make it a suitable candidate for many industrial applications. [ABSTRACT FROM AUTHOR]

This paper is devoted to the problem of prescribed performance trajectory tracking control for symmetrical underactuated unmanned surface vessels (USVs) in the presence of model uncertainties and input quantization. By combining backstepping filter mechanisms and adaptive algorithms, two robust control architectures are investigated for surge motion and yaw motion. To guarantee the prespecified performance requirements for position tracking control, the constrained error dynamics are transformed to unconstrained ones by virtue of a tangent-type nonlinear mapping function. On the other hand, the inaccurate model can be identified through radial basis neural networks (RBFNNs), where the minimum learning parameter (MLP) algorithm is employed with a low computational complexity. Furthermore, quantization errors can be effectively reduced even when the parameters of the quantizer remain unavailable to designers. Finally, the effectiveness of the proposed controllers is verified via theoretical analyses and numerical simulations. [ABSTRACT FROM AUTHOR]

Electric vehicle has become the main trend of the development of automobile industry. As a highly symmetrical system, the characteristics of drive motor will have a great impact on the driving comfort. Aiming at the control regulation of permanent magnet synchronous motor (PMSM) drive, a model-free and non-cascade sliding mode control with a fast-reaching law is proposed in this paper. Firstly, the mathematical model of PMSM is constructed as an ultra-local model without considering any motor parameters. Then, to improve the response speed, an integral sliding mode method with a fast reaching law is proposed, and the fast convergence can be realized. The controller system adopts single loop non-cascade control, which greatly simplifies the system structure. In order to further improve the anti-disturbance performance of the system, the dual disturbance observers are used to compensate the disturbance through feed-forward control. The stability of the system is proved by Lyapunov. Finally, the experimental results show that the proposed method has faster convergence speed and stronger anti-disturbance ability. [ABSTRACT FROM AUTHOR]