Search

The amount of end-of-life electrical and electronic devices has been widely increased, globally. This emphasizes how recycling waste electric and electronic equipment (WEEE) is essential in order to reduce the amount of WEEE that is disposed of directly in the environment. Plastics account for a big percentage in WEEE, almost 20%. As a result, the application of recycling methods on plastics gathered from WEEE is of great importance since, in this way, landfill disposal can be reduced. Nevertheless, despite the advantages, there are a lot of difficulties, such as the variety of different plastics present in the plastic mix and the existence of various additives in the plastic parts, for instance, brominated flame retardants that need special attention during their treatments, which restricts their wide application. Considering all these, this review aims to provide readers with all the current techniques and perspectives that are available for both the thermal and the catalytic recycling of plastics retrieved from WEEE. Apart from the up-to-date information on the recycling methods, in this review, emphasis is also given on the advantages each method offers and also on the difficulties and the limitations that may prevent them from being applied on a large scale. Current challenges are critically examined, including the use of mechanical or thermo-chemical recycling, the treatment of individual polymers or polymer blends and the separation of harmful additives before recycling or not. Finally, emerging technologies are briefly discussed. [ABSTRACT FROM AUTHOR]

Modern polymer coatings possess tremendous multifunctionalities and have attracted immense research interest in recent decades. However, with the expeditious development of technologies and industries, there is a vast demand for the flame retardancy and electrical conductivity of engineered polymer coatings. Traditional functional materials that render the polymer coatings with these properties require a sophisticated fabrication process, and their high mass gains can be a critical issue for weight-sensitive applications. In recent years, massive research has been conducted on a newly emerged two-dimensional (2D) nanosize material family, MXene. Due to the excellent electrical conductivity, flame retardancy, and lightweightness, investigations have been launched to synthesise MXene-based polymer coatings. Consequently, we performed a step-by-step review of MXene-involved polymer coatings, from solely attaching MXene to the substrate surface to the multilayered coating of modified MXene with other components. This review examines the performances of the fire safety enhancement and electrical conductivity as well as the feasibility of the manufacturing procedures of the as-prepared polymer composites. Additionally, the fabricated polymer coatings' dual property mechanisms are well-demonstrated. Finally, the prospect of MXene participating in polymer coatings to render flame retardancy and electrical conductivity is forecasted. [ABSTRACT FROM AUTHOR]

Silicone rubber (SR), as one kind of highly valuable rubber material, has been widely used in many fields, e.g., construction, transportation, the electronics industry, automobiles, aviation, and biology, owing to its attractive properties, including high- and low-temperature resistance, weathering resistance, chemical stability, and electrical isolation, as well as transparency. Unfortunately, the inherent flammability of SR largely restricts its practical application in many fields that have high standard requirements for flame retardancy. Throughout the last decade, a series of flame-retardant strategies have been adopted which enhance the flame retardancy of SR and even enhance its other key properties, such as mechanical properties and thermal stability. This comprehensive review systematically reviewed the recent research advances in flame-retarded SR materials and summarized and introduced the up-to-date design of different types of flame retardants and their effects on flame-retardant properties and other performances of SR. In addition, the related flame-retardant mechanisms of the as-prepared flame-retardant SR materials are analyzed and presented. Moreover, key challenges associated with these various types of FRs are discussed, and future development directions are also proposed. [ABSTRACT FROM AUTHOR]

We present a review of current research on promising flame retardants using specific methods of applying metal–organic frameworks (MOFs) to the highly flammable fibrous surface of cotton fabric. In this review, we initially address the reasons why the search for new flame retardants has becomes critically important in textile finishing, the area responsible for adhering new functionalities to substrates. This addition of characteristics is closely linked to the nature of the fibers, so the reason for the improvement in cotton fabric in relation to flame retardancy is discussed. Furthermore, the development of highly porous nanomaterials that can generate composites with specific functions is described, as well as their application and methods of integration into textile surfaces. Finally, the main candidates for flame retardant functionality in cellulosic materials are identified. It is also hoped that this work will facilitate researchers to develop and formulate new methods of applying nanomaterials to textile substrates, with a view to becoming a reference for new research into the development of adhesion of emerging materials to traditional materials. [ABSTRACT FROM AUTHOR]

Brominated flame retardants (BFRs) are synthetic chemicals widely used to reduce the flammability of consumer products, including electronics, textiles, and furniture. Despite their effectiveness in fire prevention, BFRs pose significant environmental and health risks due to their persistence, bioaccumulation, and potential toxicity. This review provides a comprehensive examination of BFRs, focusing on recent advancements in analytical methods for their detection and quantification in environmental and biological samples. The study explored the physicochemical properties that influence BFR distribution and transport in various matrices, including soil, water, air, sediments, and biota. The review also summarizes current knowledge on the occurrence and environmental fate of BFRs, highlighting their mobility and long-range transport. Furthermore, the study discusses the health risks associated with BFR exposure, emphasizing their endocrine-disrupting effects and impact on reproductive and neurological functions. By integrating findings from recent studies, this review aims to enhance the understanding of BFR behavior and inform regulatory strategies to mitigate their adverse effects on human health and the environment. [ABSTRACT FROM AUTHOR]

The control of powder aging during Selective Laser Sintering (SLS) processing is one of the challenges to be overcome for the implementation of this technique in serial production. Aging phenomena, because of the elevated temperatures and long processing times, need to be considered when a fraction of the polymer powders present in the build chamber and not used to manufacture the parts are reused at various times. The aim of this study was to investigate the influence of successive reuse of blends of pure Polyamide 12 and its blends with two types of flame retardants (FR): ammonium polyphosphate (APP) and zinc borate (ZB). The composition of the blends was 70/30 (wt/wt) PA 12/FR. Four successive processing stages have been carried out by collecting the remaining powder blend each time. The powders were re-used using the same processing parameters after sieving. DSC measurements showed that the incorporation of FRs entailed a reduction in the processing window up to 4 °C; nevertheless, no further reduction was noted after aging. The TGA curves of aged blends of powders were also similar for pure PA 12 and PA 12 with FR. In addition, initial and reused powders presented a higher degree of crystallinity than the specimens processed from the powders. The heterogeneous character of the PA 12 after LS processing or reprocessing was shown through Pyrolysis Combustion Flow Calorimetry (PCFC) and cone calorimeter (CC) tests. FTIR analysis also showed that post-condensation reactions have occurred. The mode of action of the flame retardants was clearly seen on HRR curves at both tests. The first reuses of PA 12 powders entailed a significant reduction in time to ignition at the cone calorimeter (150 for the initial material to around 90 s for the reused material), indicating the formation of short polymer chains. Only in the case of zinc borate was it noticed that re-used powder was detrimental to the fire performance because of a strong increase in the value of pHRR (between 163 and 220 kW/m2 for reused material instead of 125 kW/m2 for the initial one). [ABSTRACT FROM AUTHOR]

MXene, a promising two-dimensional nanomaterial, exhibits significant potential across various applications due to its multilayered structure, metal-like conductivity, solution processability, and surface functionalization capabilities. These remarkable properties facilitate the integration of MXenes and MXene-based materials into high-performance polymer composites. Regarding this, a comprehensive and well-structured up-to-date review is essential to provide an in-depth understanding of MXene/thermoplastic polyurethane nanocomposites. This review discusses various synthetic and modification methods of MXenes, current research progress and future potential on MXene/thermoplastic polyurethane nanocomposites, existing knowledge gaps, and further development. The main focus is on discussing strategies for modifying MXene-based compounds and their flame-retardant efficiency, with particular emphasis on understanding their mechanisms within the TPU matrix. Ultimately, this review addresses current challenges and suggests future directions for the practical utilization of these materials. [ABSTRACT FROM AUTHOR]

This paper presents a study of the flammability and thermal decomposition products of glass fiber-reinforced epoxy resin (GFRER) with the addition of cardanol-based phosphorus-containing benzoxazine monomer (CBz) and graphene and their combinations in different proportions (up to 20 wt.%). The addition of CBz alone or in combination with graphene resulted in an increase in the limiting oxygen index (LOI) and self-extinguishing in the UL-94 HB test. The flame-retardant samples had better tensile mechanical properties than the sample without additives. The differential mass-spectrometric thermal analysis (DMSTA) of the thermal decomposition products of GFRER without additives and with the addition of CBz and graphene was carried out. CBz addition promoted the thermal decomposition of high-molecular-weight products of epoxy resin decomposition in the condensed phase and at the same time decreased the time of release of low-molecular-weight thermal decomposition products into the gas phase. Graphene addition resulted in an increase in the relative intensities of high-molecular-mass peaks compared to GFRER without additives. [ABSTRACT FROM AUTHOR]

Due to their ability to prevent or slow the spread of fires, fire-retardant coatings are utilized as the main means of fire protection for steel structures, combining easy application and high economic efficiency. This study investigates the effects of the particle size and dosage of expanded vermiculite (EV) on the fire resistance and application performance of coatings. Ammonium polyphosphate, melamine, and pentaerythritol were used as intumescent fire-retardant systems, along with waterborne hydroxyl-modified acrylic resins as the film-forming substances. The properties of fire resistance coatings were tested via scanning electron microscope (SEM), X-ray diffractometry (XRD), thermogravimetric analysis (TGA), limiting oxygen index (LOI), and cone calorimetry. The excellent fire performance of the coatings with 3 wt.% 300-mesh EV was proven, exhibiting a relative expansion of 30.43 times. Moreover, the surface structure of the charcoal layer was dense. The total smoke production (TSP) and smoke concentration (TSR) were only 0.18 m2 and 0.25 m2/m2. [ABSTRACT FROM AUTHOR]

The burning of Ethylene–Propylene–Diene Monomer (EPDM) rubber generates substantial smoke, posing a severe threat to the environment and personal safety. Considering the growing emphasis on safety and environmental protection, conventional non-smoke-suppressing flame retardants no longer satisfy the present application requirements. Consequently, there is an urgent need to develop a novel flame retardant capable of suppressing smoke formation while providing flame retardancy. Sepiolite (SEP), a porous silicate clay mineral abundant in silica and magnesium, exhibits notable advantages in the realm of flame retardancy and smoke suppression. This research focuses on the synthesis of two highly efficient flame-retardant smoke suppression systems, namely AEGS and PEGS, using Enteromorpha (EN), graphene (GE), sepiolite (SEP), ammonium polyphosphate (APP), and/or piperazine pyrophosphate (PPAP). The studied flame-retardant systems were then applied to EPDM rubber and the flame-retardant and smoke suppression abilities of EPDM/AEGS and EPDM/PEGS composites were compared. The findings indicate that the porous structure of sepiolite plays a significant role in reducing smoke emissions for EPDM composites during combustion. [ABSTRACT FROM AUTHOR]

The intumescent flame retardant (IFR) technique is an alternative to halogen-based flame retardants for reducing fire hazards in polymers. However, IFR has drawbacks like unsatisfactory flame-retardant efficiency and high loading requirements. In this study, MIL-125 (Ti-based metal–organic framework) is added to ABS/IFR composites to improve flame retardancy and reduce smoke emissions. Thermogravimetric analysis (TGA) results indicate that combining ammonium polyphosphate (APP) and expandable graphite (EG) increases charred residue and slows mass loss compared with the original ABS resin. The ABS/IFR/MIL-125 system stabilizes the char layer, serving as a protective shield against combustible gases during combustion. Additionally, MIL-125 enhances performance in microscale combustion calorimetry (MCC) flammability testing. In fire tests (UL-94, limiting oxygen index (LOI), and cone calorimeter), the ABS/IFR/MIL-125 system achieves a UL-94 V0 rating and the highest LOI value of 31.5% ± 0.1%. Peak heat lease rate (PHRR) values in the cone calorimeter are reduced by 72% with 20 wt.% of additives, and smoke production decreases by 53% compared with neat ABS. These results demonstrate the efficient synergistic effects of MIL-125 and IFR additives in improving the formation and stability of the intumescent char layer, thereby protecting ABS from intense burning. [ABSTRACT FROM AUTHOR]

Cellulose aerogels are considered as ideal thermal insulation materials owing to their excellent properties such as a low density, high porosity, and low thermal conductivity. However, they still suffer from poor mechanical properties and low flame retardancy. In this study, mullite-fibers-reinforced bagasse cellulose (Mubce) aerogels are designed using bagasse cellulose as the raw material, mullite fibers as the reinforcing agent, glutaraldehyde as the cross-linking agent, and chitosan as the additive. The resulted Mubce aerogels exhibit a low density of 0.085 g/cm3, a high porosity of 93.2%, a low thermal conductivity of 0.0276 W/(m∙K), superior mechanical performances, and an enhanced flame retardancy. The present work offers a novel and straightforward strategy for creating high-performance aerogels, aiming to broaden the application of cellulose aerogels in thermal insulation. [ABSTRACT FROM AUTHOR]

Rigid polyurethane foam (RPUF) is widely utilized in construction and rail transportation due to its lightweight properties and low thermal conductivity, contributing to energy conservation and emission reduction. However, the inherent flammability of RPUF presents significant challenges. Delaying the time to ignition and preventing flame spread post-combustion is crucial for ensuring sufficient evacuation time in the event of a fire. Based on this principle, this study explores the efficacy of using potassium salts as a catalyst to promote the self-cleavage of RPUF, generating substantial amounts of CO2, thereby reducing the local oxygen concentration and delaying ignition. Additionally, the inclusion of a reactive flame retardant (DFD) facilitates the release of phosphorus-oxygen free radicals during combustion, disrupting the combustion chain reaction and thus mitigating flame propagation. Moreover, potassium salt-induced catalytic carbonization and phosphorus derivative cross-linking enhance the condensed phase flame retardancy. Consequently, the combined application of potassium salts and DFD increases the limiting oxygen index (LOI) and reduces both peak heat release rate (PHRR) and total heat release (THR). Importantly, the incorporation of these additives does not compromise the compressive strength or thermal insulation performance of RPUF. This integrated approach offers a new and effective strategy for the development of flame retardant RPUF. [ABSTRACT FROM AUTHOR]

This research aims to explore how functionally active structures affect the physical, mechanical, thermal, and fire-resistant properties of elastomeric compositions using ethylene–propylene–diene rubber as a base. The inclusion of aluminosilicate microspheres, microfibers, and a phosphorus–boron–nitrogen–organic modifier in these structures creates a synergistic effect, enhancing the material's heat-insulating properties by strengthening coke and carbonization processes. This results in a 12–19% increase in heating time for unheated sample surfaces and a 6–17% increase in residual coke compared to existing analogs. Microspheres help counteract the negative impact of microfibers on composition density and thermal conductivity, while the phosphorus–boron–containing modifier allows for controlling the formation of the coke layer. [ABSTRACT FROM AUTHOR]

This study aims to explore new flame-retardant composites based on a phosphorus-functionalized cellulose derivative and epoxy/benzoxazine thermosetting resins in order to broaden the use of natural fibers in advanced applications. The study involved the phosphorylation of microcrystalline cellulose followed by its characterization through employing various analytical methods to corroborate the accomplishment of its functionalization. The curing behavior of composites based on the polybenzoxazine/epoxy copolymer reinforced with (1 and 5 wt.%) modified microcrystalline cellulose was hereafter considered. The thermal behavior of these composites was correspondingly investigated using thermogravimetric analysis, where improved thermal stability and the limiting oxygen index were stressed. Flame retardancy tests using the vertical burning test UL 94 and heat of combustion analysis utilizing an oxygen bomb calorimeter were also carried out to deeply examine the possible flame retardancy ability of the considered composites. [ABSTRACT FROM AUTHOR]

In this study, environmentally friendly and low-cost biomass materials were selected as wood flame retardants. Three polyelectrolyte flame-retardant coatings made from chitosan (CS), tea polyphenols (TP), soybean isolate protein (SPI), and banana peel powder (BBP) were constructed on wood surfaces by layer-by-layer (LBL) self-assembly. The results of SEM-EDS and FT-IR analyses confirmed the successful deposition of CS-TP, CS-SPI, and CS-BPP on the wood surface, and the content of N element increased. The TG results showed that the initial decomposition temperature and the maximum thermal decomposition temperature of the coated wood specimens decreased, while the char residue increased significantly. This is due to the earlier pyrolysis of CS-TP, CS-SPI, and CS-BBP. This shows that the three polyelectrolyte flame-retardant coatings can improve the thermal stability of wood. The combustion behavior of the wood specimen was observed by exposure to combustion; the coated wood could self-extinguish within a certain period of time after ignition, and the flame-retardant performance was improved to a certain extent. SEM and EDS characterization analyses of the carbon residue after combustion showed that the coated wood charcoal layer was denser, which could effectively block heat and combustible gas. [ABSTRACT FROM AUTHOR]

Fire is generally recognized as a major threat to the protection of historic timber architecture. Thus, there is an urgent need to study the fire properties of historic timber structures so as to better protect them in the future. Two types of commonly used wood species (pine and poplar) were selected as test specimens and three types of surface treatments (Chinese traditional coating, modern flame retardant, and a combination of the two methods) were applied. The specimens were subjected to a semi-full-scale fire test. The charring rate and the surface heating curve were calculated during the fire test to assess the flammability of various woods under different treatments. Results showed that the fire properties of traditional-coated wood were better than the modern type, but large amounts of smoke were released during combustion. The combination of traditional and modern methods did not significantly improve the overall fire properties and was even worse than the traditional treatment alone. At the same time, the fire properties of the modern method are highly correlated with the type of wood species used. The above results can provide informative advice on the selection of suitable surface treatments for the subsequent restoration of ancient buildings. [ABSTRACT FROM AUTHOR]

Plastics and composites for consumer goods often require flame retardants (FRs) to mitigate flammability risks. Finding FRs that are effective in new sustainable materials is important for bringing them to the market. This study evaluated various FRs in SunBG90 (a composite made from triglycerides and sulfur)—a high sulfur-content material (HSM) promising for use in Li–S batteries, where flame resistance is critical. SunBG90 was blended with FRs from several classes (inorganic, phosphorus-based, brominated, and nitrogen-containing) to assess compliance with UL94 Burning Test standards. Inorganic FRs showed poor flame retardancy and lower mechanical strength, while organic additives significantly improved fire resistance. The addition of 20 wt. % tetrabromobisphenol A enabled SunBG90 to achieve the highest flame retardancy rating (94V-0), while also enhancing wear resistance (52 IW, ASTM C1353) and bonding strength (26 psi, ASTM C482). Selected organic FRs also enhance compressive strength compared to the FR-free SunBG90. This research highlights the potential of HSMs with traditional FRs to meet stringent fire safety standards while preserving or enhancing the mechanical integrity of HSM composites. [ABSTRACT FROM AUTHOR]

This research aims to develop fiber-reinforced composites (FRC) with enhanced fire resistance, which can be particularly useful for the transport industry (e.g., aviation, automotive, and train production). The fire retardation was achieved through epoxy matrix modification with hexachlorocyclotriphosphazene (HCTP). First, the fire-resistant and mechanical properties of the epoxy matrix filled with different HCTP contents (4.8, 7.2, and 9.5 wt.%) were studied to select the most effective HCTP content for the impregnation of FRC. Then, glass, basalt, and carbon fiber fabrics were impregnated with epoxy filled with 7.2 wt.% of HCTP, and the fire resistance, flexural, and interlaminar fracture properties were studied to select the most effective HCTP-modified type of fiber reinforcement based on the test results. It was concluded that basalt fiber impregnated with epoxy filled with HCTP could be selected as the most effective reinforcement type, allowing excellent mechanical and flame-retardant properties. [ABSTRACT FROM AUTHOR]

Organophosphate esters (OPEs), as alternatives to brominated flame retardants, are extensively used in both production and daily life, with their environmental contamination and toxic effects being a concern. This study investigated the concentration levels, bioaccumulation, and ecological effects of OPEs in five different effluent-receiving rivers. The results demonstrate that the concentration range of Σ13OPEs across the five rivers was between 142.23 and 304.56 ng/L (mean: 193.50 ng/L). The highest pollution levels of OPEs were found in rivers receiving airport and industrial wastewater, followed by agricultural wastewater, mixed wastewater, and domestic wastewater. Tris(2-chloroisopropyl) phosphate (TCPP), triethyl phosphate (TEP), and tricresyl phosphate (TCrP) were identified as the main pollutants. The accumulation concentrations of OPEs in fish ranged from 54.0 to 1080.88 ng/g dw, with the highest bioaccumulation found in Pelteobagrus fulvidraco, followed by Carassius auratus and Misgurnus anguillicaudatus. The brain was the primary organ of accumulation, followed by the liver, gills, intestine, and muscle. Tri-n-propyl phosphate (TPeP) and TEP exhibited the highest bioconcentration, with log BAF values exceeding three. The bioaccumulation of OPEs was influenced by pollutant concentration levels, hydrophobic properties, and biological metabolism. Ecological risk assessment revealed that the cumulative risk values of Σ13OPEs ranged from 0.025 to 16.76, with TCrP being the major contributor. It posed a medium–low risk to algae but a high risk to crustaceans and fish. [ABSTRACT FROM AUTHOR]

Nanocellulose (CNC) seems to be a promising surfactant, which, together with expandable graphite (EG), forms the essence of an effective natural-based fire-retardant wood coating. In our research, the most suitable composition of the mixture was tested concerning good solubility, dispersion, and consistency. Favorable results were achieved with the formulation composed of a 4% CNC alkaline solution with 80 wt.% of the selected EG. Subsequently, six different types of EG were used to prepare these wood fire-retardant coatings. The effectiveness of treatments was verified using a test with a radiant heat source, where the test samples' relative weight loss, relative burning rate, and surface temperature during 600 s were evaluated. All prepared formulations can be characterized as more or less equally effective. However, the best results were obtained with the EG of GG 200–100 N, where the mass loss of the sample was 8.10 ± 1.24%. Very good results were also achieved by graphite 25 E + 180 HPH (8.70 ± 0.89%), which is similar to the previous one, even according to the microscopic assessment of the coating as well as the expanded layer. The graphite type 25 K + 180 (8.86 ± 0.65%) shows the expanded layer's best adhesion, coating uniformity, and ease of application. The results of this work confirmed that the CNC coating itself has significant retardation effects. [ABSTRACT FROM AUTHOR]

Expandable graphite (EG) was modified with a charring agent and organic–inorganic hybridized intumescent flame retardants (MEG) were synthesized. This study uses a cone calorimeter (CCT) and a DaqPRO 5300 radiation heat flow meter (Fourtec, Tel Aviv, Israel) to evaluate the fire-resistant properties influenced by MEG on intumescent fire-retardant coatings. The impact of MEG on the thermal degradation of these coatings was investigated through the use of thermogravimetric analysis (TGA). The results obtained by CCT demonstrated that the incorporation of MEG markedly diminished the heat release rate and total heat release rate of the coating, in addition to enhancing the char residue compared to coatings with only expandable graphite (EG). Furthermore, TGA results demonstrate that adding MEG increases the weight of the char residue at elevated temperatures, suggesting improved thermal stability. Based on these findings, MEG exhibits a synergistic flame-retardant effect when combined with intumescent fire-retardant (IFR) systems. This synergy not only improves the flame-retardant properties of the coatings but also enhances their overall thermal stability, making MEG a promising additive for developing more efficient fire-retardant materials. Thus, MEG-modified coatings offer superior protection against fire hazards, highlighting their potential for practical applications in fire safety. [ABSTRACT FROM AUTHOR]

The aim of the research was to investigate the influence of calcium phosphinate (HPCA) and aluminum phosphinate (HPAL) in synergistic systems with organophosphorus compounds, i.e., diphenylcresyl phosphate (CDP) and trichloropropyl phosphate (TCPP), on the thermal stability, flammability, smoke density, and emission of toxic gases during the thermal decomposition of polyurethane (PUR) foams. Thermogravimetric analysis (TGA), along with cone calorimetry and microcalorimetry, were used to assess the influence of fillers on the thermal stability and flammability of PUR foams. The analysis of toxic gas products was performed with the use of a coupled TG–gas analyzer system. The optical density of gases was measured with the use of a smoke density chamber (SDC). The obtained results showed an increase in thermal stability and a decrease in the flammability of the PUR composites. However, the results regarding smoke and gas emissions, as well as toxic combustion by-products, present ambiguity. On one hand, the applied flame retardant systems in the form of PUR-HPCA-CDP and PUR-HPCA-TCPP led to a reduction in the concentration of CO and HCN in the gas by-products. On the other hand, they clearly increased the concentration of CO2, NOx, and smoke emissions. Microbiological studies indicated that the obtained foam material is completely safe for use and does not exhibit biocidal properties. [ABSTRACT FROM AUTHOR]

Biomass has been widely used due to its environmental friendliness, sustainability, and low toxicity. In this study, aminophosphorylated cellulose (PNC), a biomass flame retardant containing phosphorus and nitrogen, was synthesized by esterification from cellulose and introduced into polyurethane to prepare flame-retardant rigid polyurethane foam. The combustion properties of the PU and PU/PNC composites were studied using the limiting oxygen index (LOI), UL-94, and cone calorimeter (CCT) methods. The thermal degradation behavior of the PU and PU/PNC composites was analyzed by thermogravimetric analysis (TGA) and thermogravimetric infrared spectroscopy (TG-IR). The char layer after combustion was characterized using SEM, Raman, and XPS. The experimental results showed that the introduction of PNC significantly improved the flame-retardant effect and safety of PU/PNC composites. Adding 15 wt% PNC to PU resulted in a vertical burning grade of V-0 and a limiting oxygen index of 23.5%. Compared to the pure sample, the residual char content of PU/PNC15 in a nitrogen atmosphere increased by 181%, and the total heat release (THR) decreased by 56.3%. A Raman analysis of the char layer after CCT combustion revealed that the ID/IG ratio of PU/PNC15 decreased from 4.11 to 3.61, indicating that the flame retardant could increase the stability of the char layer. The TG-IR results showed that PNC diluted the concentration of O2 and combustible gases by releasing inert gases such as CO2. These findings suggest that the developed PU/PNC composites have significant potential for real-world applications, particularly in industries requiring enhanced fire safety, such as construction, transportation, and electronics. The use of PNC provides an eco-friendly alternative to traditional flame retardants. This research paves the way for the development of safer, more sustainable, and environmentally friendly fire-resistant materials for a wide range of applications. [ABSTRACT FROM AUTHOR]

The aquatic ecotoxicity of three α-amino acid-derived polyamidoamines (PAAs) was studied using zebrafish embryos as a viable vertebrate model organism. The PAAs examined were water-soluble amphoteric polyelectrolytes with a primarily negative charge, which were efficient flame retardants for cotton. The fish embryo acute toxicity test performed with PAA water solutions using 1.5–500 mg L−1 concentrations showed that toxicity did not statistically differ from the control. The survival rates were indeed >90%, even at the highest concentration; the hatching rates were >80%; and the numbers of morphological defects were comparable to those of the control. Tests using transgenic zebrafish lines indicated that the numbers of microscopic vascular and musculoskeletal defects were comparable to the control, with one random concentration showing doubled alterations. Sensory–motor tests in response to visual and tactile stimuli were also performed. In the presence of PAAs, embryos exposed to alternating light/dark cycles showed an insignificant mobility reduction during the dark phase. Touch-evoked response tests revealed a mild effect of PAAs on the neuromotor system at concentrations > 10 mg L−1. The cystine/glycine copolymer at 100 mg L−1 exhibited the greatest effect. Overall, the studied PAAs showed a minimal impact on aquatic systems and should be further considered as promising ecofriendly materials. [ABSTRACT FROM AUTHOR]

The increasing global commitment to carbon neutrality has propelled a heightened focus on sustainable construction materials, with wood emerging as pivotal due to its environmental benefits. This review explores the development and application of eco-friendly polymer nanocomposite coatings to enhance wood's fire resistance, addressing a critical limitation in its widespread adoption. These nanocomposites demonstrate improved thermal stability and char formation properties by integrating nanoparticles, such as nano-clays, graphene oxide, and metal oxides, into biopolymer matrices. This significantly mitigates the flammability of wood substrates, creating a robust barrier against heat and oxygen. The review provides a comprehensive examination of these advanced coatings' synthesis, characterization, and performance. By emphasizing recent innovations and outlining future research directions, this review underscores the potential of eco-friendly polymer nanocomposite coatings as next-generation fire retardants. This advancement supports the expanded utilization of wood in sustainable construction practices and aligns with global initiatives toward achieving carbon neutrality. [ABSTRACT FROM AUTHOR]

Flame retardants are commonly used to reduce fire risk in various products and environments, including textiles. While many of these additives contain harmful substances, efforts are underway to reduce their usage. Current research aims to minimize flame-retardant quantities and enhance durability against external factors. This involves utilizing anchor peptides or material-binding peptides (MBPs), which are versatile molecules that bind strongly to surfaces like textiles. MBPs can be equipped with functional molecules, e.g., flame-retardant additives, by chemical or enzymatic bioconjugation. In this research, biohybrid flame retardants and an adapted finishing process are developed. Specifically, biobased adhesion promoters, the so-called MBPs, are used to finish textiles with flame-retardant additives. To date, there is no finishing process for treating textiles with MBPs and so a laboratory-scale finishing process based on foulard was developed. Necessary parameters, such as the take-off speed or the contact pressure of the squeezing rollers, are determined experimentally. In order to develop an adapted finishing process, various trials are designed and carried out. Part of the trials is the testing and comparison of different textiles (e.g., glass woven fabrics and aramid woven fabrics) under different conditions (e.g., different ratios of MBPs and flame retardants). The finished textiles are then analysed and validated regarding their flammability and the amount of adhered flame retardants. [ABSTRACT FROM AUTHOR]

In the current work, the performance properties of natural-fibre-based thermal insulation materials were examined. For this purpose, three different compositions of natural fibres were prepared: pure sheep wool (SW), wool and industrial hemp (SW/HF) fibres, and pure industrial hemp (HF) fibres. Low-melt bicomponent polylactide (PLA) fibres were used as a binding material. For specimens prepared from natural fibres, the dependence of the thermal conductivity, the tensile strength along and across the direction of product formation, and the short-term water absorption on the density of the specimens and the flammability parameters were determined. In addition, to reduce the water absorption and flammability, the specimens were coated with hydrophobic agents and flame retardants. The obtained research results were also statistically processed. The analysis of the results showed that the thermal conductivity of natural-fibre-based thermal insulation materials varied within the range of 0.0333 ÷ 0.0438 W/(m·K), the tensile strength varied from 2.5 to 130 kPa, the short-term water absorption varied from 0.5 to 8.5 kg/m2, and the water vapour diffusion resistance factor varied from 2.537 to 2.667. It was additionally determined that all the studied products were flammable. The water absorption and flammability values were significantly reduced by the use of hydrophobic agents and flame retardants. [ABSTRACT FROM AUTHOR]

Warm mix flame retardant asphalt mixture can reduce the energy dissipation and harmful gas emissions during asphalt pavement construction, as well as mitigate the adverse effects of road fires. For this, this paper studies the design and performance of a mixture modified with a combination of warm mix agent and flame retardant, and the pavement performance and flame retardancy of the modified mixture are evaluated. Additionally, a flame retardancy prediction model based on the radial basis function (RBF) neural network model is established. On this basis, the principal components analysis (PCA) model is used to analyze the most significant evaluation indicators affecting flame retardancy, and finally, a three-dimensional finite element model is developed to analyze the effects of loading on the pavement structure. The results show that compared to virgin asphalt mixture, the modified mixture shows a reduction in mixing and compaction temperatures by approximately 12 °C. The high-temperature performance of the mixture is improved, while the low-temperature performance and moisture stability slightly decrease, but its flame retardancy is significantly enhanced. The RBF neural network model revealed that the established flame retardancy prediction model has a high accuracy, allowing for precise evaluation of the flame retardancy. Finally, the PCA model identified that the combustion time has a significant effect on the flame retardancy of the asphalt mixture, and the finite element model revealed that the displacements of the warm mix fire retardant asphalt mixture were lower than virgin asphalt mixture in all directions under the loading. [ABSTRACT FROM AUTHOR]

Inflammable building finishing materials act as a major cause of fire propagation, and they, therefore, pose significant risks to life and can lead to property damage. To replace such flammable building finishing materials, many countries have established regulations limiting their use, which has led to extensive research on the development of flame-retardant building finishing materials. Such methods have included adding flame retardants to construction materials to reduce the heat release rate and total heat release. The present study aimed to enhance the fire performance of cellulose-based architectural finishing materials by creating a dual flame-retardant mixture using expandable graphite and magnesium hydroxide added to recycled paper waste. Specimen fabrication involves using a pressing method to apply uniform pressure to compress the mixture in a mold. The total heat release (THR), CO, and CO2 production of the produced specimens were measured using a cone calorimeter while varying the magnesium hydroxide additive ratio. The combustion gases were measured through NES 713 experiments to determine any changes in the Toxic Index corresponding to variations in the magnesium hydroxide content. The experiment results established a correlation between the magnesium hydroxide additive ratio and the total heat release, as well as the existence of variations in CO and CO2 production for the dual flame-retardant recycled paper material. A database for combustion gases was also obtained. It was confirmed that the fire performance was improved by confirming that the total heat release decreased by 52% from the previous one in the magnesium hydroxide content of 30 g, and it was confirmed that the inflection points of the Toxic Index value due to the change in CO and CO2 gas production occurred in the magnesium hydroxide content of 20 g due to the improvement of the fire performance. Through the ISO 5660-1 experiment data, we have secured data that can be used as foundational information for performance-oriented fire risk assessments, thereby ensuring the fire safety of cellulose materials that are vulnerable to fire. [ABSTRACT FROM AUTHOR]

As one of the most common fossil derivatives, plastics are widely used for their exceptional chemical stability, low density, and ease of processing. In recent years, there has been a significant increase in the production of waste plastics, coupled with a low recycling rate, resulting in serious environmental pollution. To enhance the use of waste plastics, this research synthesized flame-retardant materials from hypercrosslinked polystyrene with different molar fractions of flame retardants. Waste polystyrene foam was used as the raw material, while aniline, triphenylphosphine, and melamine were employed as flame-retardant additives. The flame-retardant additives were successfully doped into the porous skeleton structure of hypercrosslinked polystyrene through a chemical reaction or physical mixing to achieve in situ flame retardancy, and the materials were shaped by a phenolic resin prepolymer. Then, the samples were characterized in detail, and the results indicate that the addition of a flame retardant enhances the flame retardancy of the material. In addition, the material has excellent thermal insulation performance, with a minimum thermal conductivity of 0.04176 W/(m·K). [ABSTRACT FROM AUTHOR]

Increasing demand for electrical and electronic equipment results in the generation of a rapidly growing waste stream, known by the acronym WEEE (waste electrical and electronic equipment). The purpose of this study was to evaluate the effectiveness of green sink–float treatment in sorting plastic polymers typically found in WEEE (PP, ABS, PA6, PS, and PVC). Molasses, a by-product of sugar bio-refining, was added in various concentrations to water to form solutions at different densities. The methodology was initially tested on virgin polymers; later, it was applied to plastics from a WEEE treatment plant. The polymers were characterised through near infrared spectroscopy (NIRS) and Fourier-transform infrared spectroscopy (FTIRS) analyses; the detection of any additives and flame retardants was conducted using the sliding spark technology (SSS2) and scanning electron microscope (SEM—EDX). The results showed that, for plastics from WEEE, the recovery efficiency was 55.85% for PP in a solution of tap water while the remaining part of PP (44.15%) was recovered in a solution of water to which 90% molasses was added. Furthermore, 100% recovery efficiency was obtained for PS and 93.73% for ABS in a solution of tap water with the addition of 10% w/v molasses. A recovery efficiency of 100% was obtained for PVC and 100% for PA6 in a solution consisting solely of molasses. [ABSTRACT FROM AUTHOR]

Despite the mechanical and physical properties of polyurethane foams (PUF), their application is still hindered by high inflammability. The elaboration of effective, low-cost, and environmentally friendly fire retardants remains a pressing issue that must be addressed. This work aims to show the feasibility of the successful application of natural nanomaterials, such as halloysite nanotubes and nanocellulose, as promising additives to the commercial halogen-free, fire-retardant triphenyl phosphate (TPP) to enhance the flame retardance of open-cell polyurethane foams. The nanocomposite foams were synthesized by in situ polymerization. Investigation of the mechanical properties of the nanocomposite PUF revealed that the nanoscale additives led to a notable decrease in the foam's compressibility. The obtained results of the flammability tests clearly indicate that there is a prominent synergetic effect between the fire-retardant and the natural nanoscale additives. The nanocomposite foams containing a mixture of TPP (10 and 20 parts per hundred polyol by weight) and either 10 wt.% of nanocellulose or 20 wt.% of halloysite demonstrated the lowest burning rate without dripping and were rated as HB materials according to UL 94 classification. [ABSTRACT FROM AUTHOR]

Polyethylene terephthalate (PET) foams have the characteristics of being lightweight and high strength, as well as offering good heat resistance, minimal water absorption, etc., and they have been widely used in the wind power field. In addition, they are being promisingly applied in automotive, rail, marine, construction, and other related fields. Therefore, the flame retardancy(FR) of PET foams is an issue that requires investigation. The addition of flame retardants would affect the chain extension reaction, viscoelasticity, and foamability of PET. In this study, zinc diethyl hypophosphite (ZDP) and decabromodiphenylethane (DBDPE) were used to form a synergistic FR system, in which ZDP is an acid source and DBDPE is a gas source, and both of them synergistically produced an expanded carbon layer to improve the flame retardancy of PET foams. The ratio of ZDP and DBDPE is crucial for the carbon yield and the expansion and thermal stability of the char layers. At the ZDP/DBDPE ratios of 9/3 and 7/5, the thickness of the char layers is about 3–4 mm, the limiting oxygen index (LOI) values of FR modified PET are 32.7% and 33.6%, respectively, and the vertical combustion tests both reached the V-0 level. As for the extruded phosphorous/bromine synergism FR PET foams, ZDP/DBDPE ratios of 3:1 and 2:1 were applied. As a result, the vertical combustion grade of foamed specimens could still reach V-0 grade, and the LOI values are all over 27%, reaching the refractory grade. [ABSTRACT FROM AUTHOR]

With the rapid development of electronic information technology, higher requirements have been put forward for the dielectric properties and load-bearing capacity of materials. In continuous glass fiber-reinforced thermoplastic composites, polypropylene matrix is a non-polar polymer with a very low dielectric constant and dielectric loss, but polypropylene is extremely flammable which greatly limits its application. Aiming at the better application of flame retardant-modified continuous glass fiber-reinforced polypropylene composites (FR/GF/PP) in the field of electronic communication, the effects of four different kinds of flame retardants (Decabromodiphenyl ethane (DBDPE), halogen-free one-component flame retardant (MONO), halogen-free compound flame retardant (MULTI), and intumescent flame retardant (IFR)) on the properties of FR/GF/PP were compared, including the mechanical properties, dielectric properties and flame-retardant properties. The results showed that among the FR/GF/PP, IFR has the highest performance in mechanical properties, MULTI has better performance in LOI, DBDPE and IFR have better performance in flame retardant rating, and DBDPE and IFR have lower dielectric properties. Finally, gray relational analysis is applied to propose an approach for selecting the optimal combination (flame retardant type and flame-retardant content) of comprehensive performance. In the application exemplified in this paper, the performance of IFR-3-modified GF/PP is optimized. [ABSTRACT FROM AUTHOR]

This research studies natural rubber (NR) composite blends prepared with recycled polyethylene (PE), polyurethane waste (PU), silica (SiO2), and aluminum trihydroxide (ATH) under the proper mixing conditions using an internal mixer and a two-roll mill. The mechanical, impact, dynamic mechanical, and thermal properties, together with flammability, were investigated. NR/PU composites filled with a specific SiO2/ATH concentration resulted in excellent flame-retardant properties without using PE. Adding PE causes poor flammability, while using PU and SiO2 prevents flame extensibility of the composites. In addition, SiO2 and ATH synergistically improved both mechanical and dynamical mechanical properties. This is attributed to the reinforcement of SiO2 particles inside the matrix, whereas the ATH releases water as a flame retardant. The V-0 composites tested with UL-94 showed acceptable heat resistance, strength, and durability, making them suitable for interior and exterior applications in buildings without the lightweight requirement. [ABSTRACT FROM AUTHOR]

Traditional wood protection methods involving fire retardants and preservative paints have limitations, requiring periodic renewal during a building's lifecycle and generating hazardous waste post-use. This study aims to achieve a multifaceted solution, simultaneously enhancing wood's resistance to fire, fungi, and insects using natural and/or recycled mineral waste components containing lime that react with pozzolanic additives. Additionally, organic humates provide protection against pests (fungi and insects). Following the crystallization processes within the wood's structure, it exhibits increased resistance to fire, as demonstrated by tests involving seven species. The study also describes wood tolerance tests against termites (Reticulitermes flavipes) that yielded promising results, indicating that the treated wood is an unsuitable habitat for these pests. An additional advantage for the timber industry is that the crystallized composite filling the wood's pores minimizes wood stitching and reduces internal stresses during the drying process. This property enhances the utility of timber in frame structures and carpentry joints, which are less susceptible to moisture-induced movements. The timber impregnated by our method can also be repurposed or disposed of as non-hazardous waste. This research thus offers an eco-friendly and effective approach to wood protection. [ABSTRACT FROM AUTHOR]

In modern society, the size of buildings tends to expand due to technological advances. However, while prioritizing performance design and specific building materials, fire research has fallen short of creating a comprehensive fire characteristic database for building materials. This study presents a plan for building a big data resource to evaluate the fire performance of cellulose-based flame retardant building finishing material in buildings of varying sizes. The three types of building finishing materials applied in this study are polyurethane foam, MDF, and cellulose-based building finishing materials. The variables were determined based on the floor area, and the change in floor area was calculated using the aspect ratio, a dimensionless number. Data analysis utilized the Fire Dynamics Simulator (FDS) to determine the time required to meet life safety standards for temperature, visibility, and Fractional Effective Dose (FED). The results confirm a correlation between the safe evacuation time (ASET) and increasing floor area. Additionally, the study demonstrates that cellulose-based flame-retardant building finishing material effectively maintains safe evacuation times even with increasing floor areas, as evidenced by increases of 41.0 s, 13.2 s, and 97.5 s in temperature, visibility, and FED, respectively. [ABSTRACT FROM AUTHOR]

Mine fire accidents frequently constitute a major threat to mining safety, and their potential consequences are extremely severe, which highlights the urgency of fire prevention and control research. In this study, the CiteSpace software was used to conduct a metrological analysis of 717 relevant studies in the field of mine fire prevention and control (MFPC), aiming to reveal the research trends and trends in this field. This analysis found that the annual number of MFPC articles showed a significant upward trend, indicating that it is in rapid development during the active period. China, the United States, and Australia are the main contributors in this field, and the institutional contribution of China University of Mining and Technology is particularly outstanding, reflecting the regional concentration of research activities. The analysis of cooperation networks reveals the close cross-regional collaboration among European countries. The inhibition effect and evaluation criteria and the inhibition technology under different coal characteristics have become the focus of research. Activation energy, release, and quantum chemistry have become recent hot spots, reflecting the research on the mechanism of forward physicochemical synergistic inhibition and the in-depth exploration of the molecular level. It indicates that future research will focus on the development of temperature-responsive retardant materials, the application of quantum chemistry theory, and the exploration of the microscopic mechanism of coal spontaneous combustion through molecular simulation technology to further optimize the fire prevention strategy. In summary, the findings of this study not only provide a comprehensive picture of current research activities in the MFPC field but also indicate potential directions for future research and have important guiding significance for promoting the development of this field. [ABSTRACT FROM AUTHOR]

Antimony (Sb) has gained significance as a critical raw material (CRM) within the European Union (EU) due to its strategic importance in various industrial sectors, particularly in the textile industry for flame retardants and as a component of Sb-based semiconductor materials. Moreover, Sb is emerging as a potential alternative for anodes used in lithium-ion batteries, a key element in the energy transition. This study explored the feasibility of identifying and quantifying Sb mineralisations through the spectral signature of soils using laboratory reflectance spectroscopy, a non-invasive remote sensing technique, and by employing convolutional neural networks (CNNs). Standard signal pre-processing techniques were applied to the spectral data, and the soils were analysed by inductively coupled plasma mass spectrometry (ICP-MS). Despite achieving high R-squared (0.7) values and an RMSE of 173 ppm for Sb, the study faces a significant challenge of generalisation of the model to new data. Despite the limitations, this study provides valuable insights into potential strategies for future research in this field. [ABSTRACT FROM AUTHOR]

In this study, a top-down approach was employed for the fabrication of flame-retardant wood aerogels. The process involved the removal of lignin and the removal of hemicellulose utilizing NaOH concomitantly with the incorporation of ZnO and urea. Subsequently, an in situ reaction with boric acid was conducted to prepare flame-retardant wood aerogels. The morphology, chemical composition, thermal stability, and flame retardancy of the samples were studied. The results show that the NaOH treatment transformed the wood into a layered structure, and flame-retardant particles were uniformly distributed on the surface of the aerogel. The peak heat release rate (PHRR) and total heat release (THR) of the flame-retardant aerogel were significantly reduced compared with the control samples. Meanwhile, its vertical burning test (UL-94) rating reached the V-0 level, and the Limiting Oxygen Index (LOI) could exceed 90%. The flame-retardant wood aerogel exhibited excellent flame retardancy and self-extinguishing properties. [ABSTRACT FROM AUTHOR]

Gypsum-based composites were prepared via a slurry casting process using construction gypsum as the binding material and poplar fibers as reinforcing material. The effects of different fiber content and curing time on the mechanical properties, water resistance, and flame retardancy of these composites were investigated, and the influence mechanism was characterized by infrared spectroscopy, scanning electron microscopy, and X-ray diffractometry. The results showed that the best composite mechanical strength was achieved with 10% poplar fiber- content, and the absolute dry flexural and compressive strengths reached 3.59 and 8.06 MPa, respectively. Compared with pure gypsum, the flexural strength and compressive strength increased by 10% and 19%, respectively. The inclusion of fibers somewhat prevented the migration of free water within the composites and enhanced their water resistance. At 10% fiber content, the composite's 24 h water absorption rate was 34.3%, 8% lower than that of pure gypsum, with a softening coefficient of 0.55. However, fiber content increases the porosity of gypsum-based composites. When heated, this increased porosity accelerates' heat conduction within the matrix, raising the peak and total exothermic rates, thereby weakening the composites' inherently flame-retardant properties. Poplar-fiber-reinforced gypsum-based composites offered superior performance in commercial applications, compared to pure gypsum board, providing a sustainable and green alternative for ceilings, partitions, and other applications, while broadening the prospects for gypsum-based composites in the engineering field. [ABSTRACT FROM AUTHOR]

Ammonium polyphosphate (APP), a pivotal constituent within environmentally friendly flame retardants, exhibits notable decomposition susceptibility and potentially engenders ecological peril. Consequently, monitoring the APP concentration to ensure product integrity and facilitate the efficacious management of wastewater from production processes is of great significance. A fluorescent assay was devised to swiftly discern APP utilizing 4′,6′-diamino-2-phenylindole (DAPI). With increasing APP concentrations, DAPI undergoes intercalation within its structure, emitting pronounced fluorescence. Notably, the flame retardant JLS-PNA220-A, predominantly comprising APP, was employed as the test substrate. Establishing a linear relationship between fluorescence intensity (F-F0) and JLS-PNA220-A concentration yielded the equation y = 76.08x + 463.2 (R2 = 0.9992), with a LOD determined to be 0.853 mg/L. The method was used to assess the degradation capacity of APP-degrading bacteria. Strain D-3 was isolated, and subsequent analysis of its 16S DNA sequence classified it as belonging to the Acinetobacter genus. Acinetobacter nosocomialis D-3 demonstrated superior APP degradation capabilities under pH 7 at 37 °C, with degradation rates exceeding 85% over a four-day cultivation period. It underscores the sensitivity and efficacy of the proposed method for APP detection. Furthermore, Acinetobacter nosocomialis D-3 exhibits promising potential for remediation of residual APP through environmental biodegradation processes. [ABSTRACT FROM AUTHOR]

Over the past few decades, polymer composites have received significant interest and become protagonists due to their enhanced properties and wide range of applications. Herein, we examined the impact of filler and flame retardants in hemp seed oil-based rigid polyurethane foam (RPUF) composites' performance. Firstly, the hemp seed oil (HSO) was converted to a corresponding epoxy analog, followed by a ring-opening reaction to synthesize hemp bio-polyols. The hemp polyol was then reacted with diisocyanate in the presence of commercial polyols and other foaming components to produce RPUF in a single step. In addition, different fillers like microcrystalline cellulose, alkaline lignin, titanium dioxide, and melamine (as a flame retardant) were used in different wt.% ratios to fabricate composite foam. The mechanical characteristics, thermal degradation behavior, cellular morphology, apparent density, flammability, and closed-cell contents of the generated composite foams were examined. An initial screening of different fillers revealed that microcrystalline cellulose significantly improves the mechanical strength up to 318 kPa. The effect of melamine as a flame retardant in composite foam was also examined, which shows the highest compression strength of 447 kPa. Significantly better anti-flaming qualities than those of neat foam based on HSO have been reflected using 22.15 wt.% of melamine, with the lowest burning time of 4.1 s and weight loss of 1.88 wt.%. All the composite foams showed about 90% closed-cell content. The present work illustrates the assembly of a filler-based polyurethane foam composite with anti-flaming properties from bio-based feedstocks with high-performance applications. [ABSTRACT FROM AUTHOR]

To broaden the applications of wood, it is necessary to prepare flame-retardant coatings that can protect wood substrates during combustion. In this study, a bio-based, intumescent, flame-retardant phytic acid–melamine polyelectrolyte (PM) was prepared using phosphorus-rich biomass phytic acid and nitrogen-rich melamine as raw materials through an ion crosslinking reaction. Subsequently, a series of bio-based, flame-retardant wood coatings were prepared by optimizing the structure of urea–formaldehyde resin with the addition of melamine, sodium lignosulfonate, and PM as a flame-retardant curing agent. Woods coated with PM-containing coatings displayed significantly improved flame-retardant performances in comparison to uncoated woods. For PM-cured woods, the measured values of total heat release and total smoke production were 91.51% and 57.80% lower, respectively, compared with those of uncoated wood. Furthermore, the fire growth index decreased by 97.32%, indicating a lower fire hazard. This increase in flame retardancy and smoke suppression performance is due to the dense expanded carbon layer formed during the combustion of the coating, which isolates oxygen and heat. In addition, the mechanical properties of the flame-retardant coatings cured with PM are similar to those cured with a commercial curing agent, NH4Cl. In addition, the prepared flame-retardant coating can also stain the wood. This study proves the excellent flame-retarding and curing effect of ammonium phytate in urea–formaldehyde resin coatings and provides a new approach for the application of bio-based flame retardants in wood coatings. [ABSTRACT FROM AUTHOR]

Magnesium hydroxide, as a green inorganic flame-retardancy additive, has been widely used in polymer flame retardancy. However, magnesium hydroxide is difficult to disperse with epoxy resin (EP), and its flame-retardancy performance is poor, so it is difficult to use in flame-retardant epoxy resin. In this study, an efficient magnesium hydroxide-based flame retardant (MH@PPAC) was prepared by surface modification of 2-(diphenyl phosphine) benzoic acid (PPAC) using a simple method. The effect of MH@PPAC on the flame-retardancy properties for epoxy resins was investigated, and the flame-retardancy mechanism was studied. The results show that 5 wt% MH@PPAC can increase the limiting oxygen index for EP from 24.1% to 38.9%, achieving a V-0 rating. At the same time, compared to EP, the peak heat release rate, peak smoke production rate, total smoke production rate, and peak CO generation rate for EP/5 wt% MH@PPAC composite material decreased by 53%, 45%, 51.85%, and 53.13% respectively. The cooperative effect for PPAC and MH promotes the formation of a continuous and dense char layer during the combustion process for the EP-blend material, significantly reducing the exchange for heat and combustible gases, and effectively hindering the combustion process. Additionally, the surface modification of PPAC enhances the dispersion of MH in the EP matrix, endowing EP with superior mechanical properties that meet practical application requirements, thereby expanding the application scope for flame-retardant EP-blend materials. [ABSTRACT FROM AUTHOR]

In civil construction, one of the primary challenges associated with wood application is its high flammability and low durability during fires. Although chemical treatment with fire-retardant properties exists, they are expensive and of non-renewable origin. Tannin, a wood extractive, being a phenolic compound, holds promise for enhancing the thermal properties of wood. This study aimed to assess the efficacy of tannin as a fire retardant and compare it with a commercial product, as well as comparing different application techniques for these products. Wood samples from the Simarouba amara Aubl. species were utilized. Tannin and a commercial flame retardant were applied via immersion, vacuum impregnation, brushing, and a treatment of tannin incorporated into water-based wood varnish. Alongside the burning test performance, assessments of the wood's physical properties, such as colorimetry, thermal stability, and mass retention, were conducted. The application of tannin altered the wood's color and reduced the spread of fire; its presence significantly reduced the flame duration and maintained the wood's structural integrity. However, tannin retention was lower compared to commercial flame retardant, leading to reduced fire retardancy. Among the methods tested, immersion proved to be the most effective in enhancing the wood's resistance to flame contact. [ABSTRACT FROM AUTHOR]

The recycling of waste materials is a way of limiting over-consumption and optimizing the value of resources. Within the framework of a circular economy, this can be applied to post-consumer plastic wastes, but also to biobased by-products. Hence, this work deals with the design of composite materials by combining recycled high-density polyethylene (HDPE) and polypropylene (PP) coming from bottle caps and virgin cork of insufficient quality for cork stoppers. Different fractions (0, 5, 10, 15, and 20 wt%) of virgin cork were incorporated into recycled polymers (HDPEr and PPr). These composites were prepared without a coupling agent or fire retardant. The morphology and mechanical properties of the different conditionings were studied and compared. The thermal decomposition and the fire behavior of the composites were also investigated. Microscopy revealed the poor adhesion between the cork particles and polymer matrices. However, this limited interaction affected only the tensile strength of the PPr composites, while that of the HDPEr composites remained almost constant. The addition of cork was shown to reduce the time to ignition, but also to promote charring and reduce the heat released during the composite's combustion. The feasibility of composites based on cork and HDPEr/PPr waste opens the way for their reuse. [ABSTRACT FROM AUTHOR]

Organophosphorus flame retardants (OPFRs) are abundant and persistent in the environment but have limited toxicity information. Their similarity in structure to organophosphate pesticides presents great concern for developmental neurotoxicity (DNT). However, current in vivo testing is not suitable to provide DNT information on the amount of OPFRs that lack data. Over the past decade, an in vitro battery was developed to enhance DNT assessment, consisting of assays that evaluate cellular processes in neurodevelopment and function. In this study, behavioral data of small model organisms were also included. To assess if these assays provide sufficient mechanistic coverage to prioritize chemicals for further testing and/or identify hazards, an integrated approach to testing and assessment (IATA) was developed with additional information from the Integrated Chemical Environment (ICE) and the literature. Human biomonitoring and exposure data were identified and physiologically-based toxicokinetic models were applied to relate in vitro toxicity data to human exposure based on maximum plasma concentration. Eight OPFRs were evaluated, including aromatic OPFRs (triphenyl phosphate (TPHP), isopropylated phenyl phosphate (IPP), 2-ethylhexyl diphenyl phosphate (EHDP), tricresyl phosphate (TMPP), isodecyl diphenyl phosphate (IDDP), tert-butylphenyl diphenyl phosphate (BPDP)) and halogenated FRs ((Tris(1,3-dichloro-2-propyl) phosphate (TDCIPP), tris(2-chloroethyl) phosphate (TCEP)). Two representative brominated flame retardants (BFRs) (2,2′4,4′-tetrabromodiphenyl ether (BDE-47) and 3,3′,5,5′-tetrabromobisphenol A (TBBPA)) with known DNT potential were selected for toxicity benchmarking. Data from the DNT battery indicate that the aromatic OPFRs have activity at similar concentrations as the BFRs and should therefore be evaluated further. However, these assays provide limited information on the mechanism of the compounds. By integrating information from ICE and the literature, endocrine disruption was identified as a potential mechanism. This IATA case study indicates that human exposure to some OPFRs could lead to a plasma concentration similar to those exerting in vitro activities, indicating potential concern for human health. [ABSTRACT FROM AUTHOR]

Background: Organophosphate flame retardants (OPFRs) are compounds with a wide range of industrial and commercial applications and are mainly used as flame retardants and plasticizers. The global consumption of OPFRs has risen rapidly in recent decades, and they have been widely detected in environmental media. Unfortunately, OPFRs have been associated with many adverse health outcomes. The issue of the health risks of OPFRs is attracting increasing attention. Therefore, there is a need to review the current state of research and trends in this field to help researchers and policymakers quickly understand the field, identify new research directions, and allocate appropriate resources for further development of the OPFR health risk research field. Methods: This study statistically analyzed 1162 relevant publications included in the Web of Science Core Collection from 2003–2023. The internal and external features of the literature, such as publication trends, countries, authors, journals, and keywords, were quantitatively analyzed and visually presented to identify the research hotspots, compositions, and paradigms of the field and to horizontally and vertically analyze the development trends and structural evolution of the field. Results: The development of the field can be divided into three stages, and the field entered a period of rapid development in 2016. China (649 papers) is the most prolific country, followed by the United States (188 papers). The authors STAPLETON HM and WANG Y have the highest combined impact. International collaboration between countries and researchers still needs to be strengthened. Science of The Total Environment is the most frequently published journal (162 papers), and Environmental Science and Technology is the most frequently cited journal (5285 citations). Endocrine disruption, developmental toxicity, and neurotoxicity are the health effects of greatest interest. Conclusions: Future research is expected to be multidisciplinary, and research hotspots may involve a comprehensive assessment of OPFR exposure in the population, exploration of the mechanisms of endocrine-disrupting effects and in vivo metabolic processes, and examination of the health effects of OPFR metabolites. [ABSTRACT FROM AUTHOR]