Search

It has been recently demonstrated that laser micromachining of magnetoactive elastomers is a very convenient method for fabricating dynamic surface microstructures with magnetically tunable properties, such as wettability and surface reflectivity. In this study, we investigate the impact of the micromachining process on the fabricated material's structural properties and its chemical composition. By employing scanning electron microscopy, we investigate changes in size distribution and spatial arrangement of carbonyl iron microparticles dispersed in the polydimethylsiloxane (PDMS) matrix as a function of laser irradiation. Based on the images obtained by a low vacuum secondary electron detector, we analyze modifications of the surface topography. The results show that most profound modifications occur during the low-exposure (8 J/cm2) treatment of the surface with the laser beam. Our findings provide important insights for developing theoretical models of functional properties of laser-sculptured microstructures from magnetoactive elastomers. [ABSTRACT FROM AUTHOR]

Microplastics (MPs) are ubiquitous and evasive in nature. They can be found in complex agricultural matrices like soil and compost. In the literature, extracting MPs from soil is more prevalent; nonetheless, the same instruments in extraction in soil samples can also be used to assess MPs in compost despite the high levels of organic material. MPs in agricultural environments have recently become a focus of research due to their status as emerging pollutants. However, the lack of standardized instruments and techniques for analysis is a major challenge in assessing MPs. Despite this limitation, this review article identified and suggested some important factors to consider when selecting suitable methods or instruments for MP analysis. This article also categorized instrumental analysis in MP studies as destructive and non-destructive and highlighted the advantages and disadvantages of methods and instruments such as visual inspection, Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy (RS), and Scanning Electron Microscope (SEM). These highlights will provide researchers with a useful guide to help them choose the most appropriate method and instrumentation technique for their MP analytical research. Additionally, the article discusses the combination of two or more of these analytical instruments to improve efficiency. [ABSTRACT FROM AUTHOR]

Fábrica de Loiça de Sacavém (ca. 1858–1994) was among the first to produce white earthenware in Portugal, becoming one of the country's leading ceramic manufacturers during the late 19th to early 20th centuries. Research on white earthenware has accompanied the growing interest in post-industrial archaeology but is still poorly explored compared to more ancient ceramic productions. This study focused on the ceramic body, glazes, and colourants of tableware produced by Fábrica de Loiça de Sacavém during the first 50 years of its activity (1859–1910). A multi-analytical approach was selected to investigate the chemical and mineralogical composition of the ceramic body, glaze, and pigments using optical microscopy, variable-pressure scanning electron microscope energy-dispersive X-ray spectroscopy (VP-SEM-EDS), μ-Raman spectroscopy, μ-X-ray Diffraction (μ-XRD), and reflectance spectroscopy (hyperspectral image analysis). The studied tableware was produced with a Ca-poor siliceous–aluminous white earthenware ceramic body covered with transparent alkali lead or lead borosilicate glaze, and most colourants were complex Cr-based pigments. These results are in agreement with the little documental evidence from this period found in the manufacturer's archives. [ABSTRACT FROM AUTHOR]

The seeds of lotus (Nelumbo nucifera Gaertn.) have been used as significant medicinal and nutritional ingredients worldwide. The abundant proteins and polysaccharides in lotus seeds make them susceptible to contamination by aflatoxin (AF), a fungal toxic metabolite. This study was conducted to investigate the susceptibility of lotus seeds at different stages of ripening to AF contamination, as well as the mechanism of the contamination. Seven groups of lotus receptacles with seeds at different ripening stages (A–G, from immature to mature) were used for the experiment. Spores of Aspergillus flavus, an AF producer, were inoculated on the water-gap area of the seeds in each receptacle. Then, each receptacle was covered with a sterilized bag, and its stalk part was soaked in water containing a life-prolonging agent, after which it was kept at room temperature for 14 days. The AF content of each whole inoculated seed from the A–G groups and that of each seed part (pericarp, cotyledon, and embryo) from the D and E groups were determined using high-performance liquid chromatography. Microtome sections were prepared from the samples and observed under a light microscope and scanning electron microscope. The seeds from the A and D groups had higher AF contents than the seeds from the B, C, E, F, and G groups, indicating that the condition of the water-gap area and the development of the embryo and cotyledon parts of the seeds are associated with AF contamination. [ABSTRACT FROM AUTHOR]

Chloride ions play an important role in the corrosion of bronze through their active reactivity to copper alloys. The corrosion behavior of bronze alloys in NaCl solution was investigated by using X-ray diffraction (XRD), a scanning electron microscope (SEM), and electrochemical tests, with a special emphasis on the corrosion resistance of the α and δ phases in Cu-20 wt%Sn bronze alloys. The experimental results show that the corrosion current density of Cu-20 wt%Sn bronze alloys increases from 1.1 × 10−7 A/cm2 to 2.7 × 10−6 A/cm2 with the increase in the chloride ion concentration from 10−3 mol/L to 1 mol/L. After a soaking duration of 30 days, the matrix corrosion depth reaches 50 μm. The α phase of the alloys is easily corroded in NaCl solution, while the δ phase with high Sn content has strong corrosion resistance. This study provides relevant data for the analysis and protection of ancient bronze alloys. [ABSTRACT FROM AUTHOR]

Metalloenzymes play an important role in the regulation of many biological functions. An effective way to prevent deficiencies of essential minerals in human diets is the biofortification of plant materials. The process of enriching crop sprouts under hydroponic conditions is the easiest and cheapest to conduct and control. In this study, the sprouts of the wheat (Triticum aestivum L.) varieties Arkadia and Tonacja underwent biofortification with Fe, Zn, Mg, and Cr solutions in hydroponic media at four concentrations (0, 50, 100, and 200 µg g−1) over four and seven days. Moreover, this study is the first to combine sprout biofortification with UV-C (λ = 254 nm) radiation treatment for seed surface sterilization. The results showed that UV-C radiation was effective in suppressing seed germination contamination by microorganisms. The seed germination energy was slightly affected by UV-C radiation but remained at a high level (79–95%). The influence of this non-chemical sterilization process on seeds was tested in an innovative manner using a scanning electron microscope (SEM) and EXAKT thin-section cutting. The applied sterilization process reduced neither the growth and development of sprouts nor nutrient bioassimilation. In general, wheat sprouts easily accumulate Fe, Zn, Mg, and Cr during the applied growth period. A very strong correlation between the ion concentration in the media and microelement assimilation in the plant tissues (R2 > 0.9) was detected. The results of the quantitative ion assays performed with atomic absorption spectrometry (AAS) using the flame atomization method were correlated with the morphological evaluation of sprouts in order to determine the optimum concentration of individual elements in the hydroponic solution. The best conditions were indicated for 7-day cultivation in 100 µg g−1 of solutions with Fe (218% and 322% better nutrient accumulation in comparison to the control condition) and Zn (19 and 29 times richer in zinc concentration compared to the sprouts without supplementation). The maximum plant product biofortification with magnesium did not exceed 40% in intensity compared to the control sample. The best-developed sprouts were grown in the solution with 50 µg g−1 of Cr. In contrast, the concentration of 200 µg g−1 was clearly toxic to the wheat sprouts. [ABSTRACT FROM AUTHOR]

Due to the wide scope of applications of additive manufacturing (AM) in making final products, the mechanical strength of AM parts has become very important. Therefore, different tests are being developed to determine the structural integrity of three-dimensional printed components. In this respect, the pin-bearing test is designed to evaluate the response of a fastener, plate, and hole to stress. In this study, two different polymer materials were used to fabricate the samples utilizing the fused deposition modeling technique. Since the specimen width and hole diameter have effects on the pin-bearing strength and structural integrity of the parts, we prepared the specimens with four hole diameters to determine the influence of this ratio. A series of tensile tests were performed, and the stiffness and pin-bearing strength of additively manufactured specimens were determined. The preferred bearing failure mode was observed in several tested specimens. Subsequently, a scanning electron microscope investigation was conducted on the damaged area of the examined specimens to obtain insights into the damage mechanisms and failure behavior of the aforementioned specimens. We used digital image correlation technique to determine the strain field of dumbbell-shaped test coupons. The results of this research can be utilized for new designs of AM parts with a higher mechanical strength. [ABSTRACT FROM AUTHOR]

With the increasing development of pest resistances, it is not easy to achieve satisfactory control effects by using only one agrochemical. Additionally, although the alkaloid matrine (MT) isolated from Sophora flavescens is now utilized as a botanical pesticide in China, in fact, its pesticidal activities are much lower in magnitude than those of commercially agrochemicals. To improve its pesticidal activities, here, the joint pesticidal effects of MT with another alkaloid oxymatrine (OMT) (isolated from S. flavescens) and the monoterpene essential oil 1,8-cineole (CN) (isolated from the eucalyptus leaves) were investigated in the laboratory and greenhouse conditions. Moreover, their toxicological properties were also studied. Against Plutella xylostella, when the mass ratio of MT and OMT was 8/2, good larvicidal activity was obtained; against Tetranychus urticae, when the mass ratio of MT and OMT was 3/7, good acaricidal activity was obtained. Especially when MT and OMT were combined with CN, the significant synergistic effects were observed: against P. xylostella, the co-toxicity coefficient (CTC) of MT/OMT (8/2)/CN was 213; against T. urticae, the CTC of MT/OMT (3/7)/CN was 252. Moreover, the activity changes over time of two detoxification enzymes, carboxylesterase (CarE) and glutathione S-transferase (GST) of P. xylostella treated with MT/OMT (8/2)/CN, were observed. In addition, by scanning electron microscope (SEM), the toxicological study suggested that the acaricidal activity of MT/OMT (3/7)/CN may be related to the damage of the cuticle layer crest of T. urticae. [ABSTRACT FROM AUTHOR]

Simple Summary: In this paper, we used scanning electron microscopy to describe the morphological types, number of sensilla, and their distributions on the antennae of each nymphal instar and adult of Notobitus meleagris (Hemiptera: Heteroptera: Coreidae). The results show that there were eight subtypes of sensilla on the antennae of the nymphs and 11 subtypes of sensilla on the antennae of the adults. With the growth of instars, the type, quantity, and size of the sensilla gradually increased. Sexual dimorphism did not appear in the type of sensilla but existed in the length and diameter of some sensilla. In addition, we also discussed the functions of different types of sensilla through previous published studies, which will be helpful for further research on the behavioral and biological control of N. meleagris. The bamboo bug Notobitus meleagris (Fabricius, 1787) is a serious pest of bamboo shoots in China, India, Myanmar, Vietnam, and Singapore. The antennae of the nymphal instars and adults of N.meleagris are involved in communication among individuals and finding the host plants. In order to understand the morphology of antennal sensilla, their types, and the distribution of sensilla on the antennae of nymphal instars and adults in N. meleagris, we studied the morphology of antennal sensilla with a scanning electron microscope. The antennae of the nymphs and adults comprised the scape, pedicel, and two flagellomeres. Four types and eight subtypes of sensilla were identified in the nymphal instars (sensilla trichodea [St].1, St.2, St.3, sensilla basiconica [Sb].1, Sb.2, sensilla chaetica [Sc].1, Sc.2, sensilla coeloconica [Sco].1), whereas those of the adults had five types and eleven subtypes of sensilla (St.1, St.2, St.3, Sb.1, Sb.2, Sb.3, Sc.1, Sc.2, Sco.1, Sco.2, and sensilla campaniformia [Sca]). There are significant differences in the number, type, and size of the sensilla in different nymphal instars, which increases with the increase in nymphal instars. There was no sexual dimorphism observed in the adult sensilla; however, the length and diameter of St.3, Sb.2, and Sb.3 were sexually dimorphic. The potential functions of each sensillum were discussed based on the morphology and distribution of the antennal sensilla and were compared with similar published studies. Our results provide primary data for further research on the behavioral mechanism, green prevention, and control of N. meleagris. [ABSTRACT FROM AUTHOR]

The aim of this paper was to determine the effect of stabilized curcumin nanoemulsions (CUNE) as a food additive capable of directionally acting to inhibit molecules involved in dairy products' quality and digestibility, especially cheese. The objects were cheeses made from the milk of higher grades with addition of a CUNE and a control sample. The cheeses were studied using a scanning electron microscope (SEM) in terms of organoleptic properties, such as appearance, taste, and aroma. The results show that the addition of CUNEs improved the organoleptic properties compared to the control cheese by 150% and improved its shelf life. The SEM study shows that formulation with CUNE promotes the uniform distribution of porosity. The CUNE-based cheese shows a better sensory evaluation compared to the emulsion without curcumin. CUNE-processed cheese provided better antioxidant and antimicrobial analysis than the control sample and offers added value to the dairy sector. [ABSTRACT FROM AUTHOR]

A conical-shaped atmospheric pressure plasma jet (CS-APPJ) was developed to overcome a standard limitation of APPJs, which is their small treatment area. The CS-APPJs increase the treatment area but use the same gas flow. In the present work, polypropylene samples were treated by CS-APPJ and characterized by scanning electron microscope (SEM), the contact angle, Fourier-transformed infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). It was observed that the treatment co-occurs on the face directly in contact with the plasma and on the opposite face (OF) of the samples, i.e., no contact. However, the treatment changed the chemical composition on each side; the OF is rougher than the direct contact face (DCF), probably due to the oxygen groups in excess at the DCF and nitrogen in quantity at the OF. Although simultaneous treatment of both sides of the sample occurs for most atmospheric plasma treatments, this phenomenon is not explored in the literature. [ABSTRACT FROM AUTHOR]

The aim of this study was to apply waste wood particles (WP) with different sizes from primary wood processing as a filler for open-cell PUR foams. For this purpose, various wood particle sizes were added as a filler for polyurethane foams (PUR). The effects of the addition of of 0.05–<0.125 mm, 0.125–<0.315 mm, 0.315–1.25 mm, and >1.25–2.0 of WP to the polyurethane matrix on the density, the kinetics of PUR foaming, the cell structure, and the morphology were investigated. Scanning electron microscope (SEM) and X-ray computer tomography were used. Based on the results, it was found that the addition of WP in the amount of 10% leads to an increase in density with an increase in particle size. The research shows that the morphology of the PUR-WP foam is influenced by its particle size. The difference in the number and size of cells in PUR-WP composites depends on the wood particle size. The addition of dust causes the formation of cells of much smaller sizes; confirmed by SEM images. Moreover, computer tomography clearly demonstrates that the WP are well-dispersed within the foams' structures. [ABSTRACT FROM AUTHOR]

Cyclic loading always results in great damage to the pore structure and fractal characteristics of soft soil. Scanning electron microscope (SEM) can help collect data to describe the microstructure of soft soil. This paper conducted a series of SEM tests to interpret the effect of consolidation confining pressure, circulating dynamic stress ratios and overconsolidation ratio on soil's micro-pore structure and fractal characteristics. The results demonstrate that fractal dimension can well represent the complex characteristics of the microstructure of the soil; the larger the consolidation confining pressure, the greater the cyclic dynamic stress ratio, and the greater the overconsolidation ratio, the smaller the fractal dimension number of soil samples. Finally, an empirical fitting formula for cumulative strain considering microstructure parameters is established through data fitting. [ABSTRACT FROM AUTHOR]

Although several sample preparation methods for analyzing microplastics (MPs) in environmental matrices have been implemented in recent years, important uncertainties and criticalities in the approaches adopted still persist. Preliminary purification of samples, based on oxidative digestion, is an important phase to isolate microplastics from the environmental matrix; it should guarantee both efficacy and minimal damage to the particles. In this context, our study aims to evaluate Fenton's reaction digestion pre-treatment used to isolate and extract microplastics from environmental matrices. We evaluated the particle recovery efficiency and the impact of the oxidation method on the integrity of the MPs subjected to digestion considering different particles' polymeric composition, size, and morphology. For this purpose, two laboratory experiments were set up: the first one to evaluate the efficacy of various digestion protocols in the MPs extraction from a complex matrix, and the second one to assess the possible harm of different treatments, differing in temperatures and volume reagents used, on virgin and aged MPs. Morphological, physicochemical, and dimensional changes were verified by Scanning Electron Microscope (SEM) and Fourier Transformed Infrared (FTIR) spectroscopy. The findings of the first experiment showed the greatest difference in recovery rates especially for polyvinyl chloride and polyethylene terephthalate particles, indicating the role of temperature and the kind of polymer as the major factors influencing MPs extraction. In the second experiment, the SEM analysis revealed morphological and particle size alterations of various entities, in particular for the particles treated at 75 °C and with major evident alterations of aged MPs to virgin ones. In conclusion, this study highlights how several factors, including temperature and polymer, influence the integrity of the particles altering the quality of the final data. [ABSTRACT FROM AUTHOR]

Candida albicans can cause various infections, especially in immunocompromised patients. Its ability to develop resistance to the current antifungal drugs as well as its multiple virulence factors have rendered the problem even more complicated. Thus, in the present investigation, we elucidated an in vitro and in vivo antifungal activity of Encephalartos laurentianus methanol extract (ELME) against C. albicans clinical isolates for the first time. A phytochemical identification of 64 compounds was conducted in ELME using LC-MS/MS. Interestingly, ELME exhibited antifungal activity with MIC values that ranged from 32–256 µg/mL. Furthermore, we investigated the antibiofilm activity of ELME against the biofilms formed by C. albicans isolates. ELME displayed antibiofilm activity using a crystal violet assay as it decreased the percentages of cells, moderately and strongly forming biofilms from 62.5% to 25%. Moreover, the antibiofilm impact of ELME was elucidated using SEM and fluorescent microscope. A significant reduction in the biofilm formation by C. albicans isolates was observed. In addition, we observed that ELME resulted in the downregulation of the biofilm-related tested genes (ALS1, BCR1, PLB2, and SAP5) in 37.5% of the isolates using qRT-PCR. Besides, the in vivo antifungal activity of ELME on the kidney tissues of rats infected with C. albicans was investigated using histological and immunohistochemical studies. ELME was found to protect against C. albicans induced renal damage, decrease desmin and inducible nitric oxide synthase, increase alkaline phosphatase, and increase infected rats' survival rate. Additionally, the cytotoxicity of ELME was elucidated on Human Skin Fibroblast normal cells using MTT assay. ELME had an IC50 of 31.26 µg/mL. Thus, we can conclude that ELME might be a promising future source for antifungal compounds. [ABSTRACT FROM AUTHOR]

The presented paper aims to describe the influence of accelerating admixtures on the properties and microstructure of cement pastes and mortars. Blended slag cement CEM II/B-S containing two different clinkers (differing amounts of siliceous and aluminous phases) and four types of accelerators (calcium nitrate, sodium hydroxide, cement kiln dust, and crystal seeds) were used in research. Compressive strength tests (after 12, 24, 48 h of curing), Scanning Electron Microscope (SEM) observations together with an Energy Dispersive Spectroscopy (EDS) analysis, Mercury Intrusion Porosimetry (MIP) tests, and X-ray diffraction (XRD) analysis were conducted. Results have shown that SEM and EDS examination of the microstructure of cement pastes modified with accelerating admixtures at the observed points did not reveal differences that would be sufficient to explain the changes in compressive strength. Still, the increase in amorphous phase content indicates a faster hydration reaction rate for all pastes modified with accelerating admixture. It is backed up also by lower non-hydrated compounds content. All admixtures accelerate the hydration reaction of calcium silicate phases of cement, but only NaOH and cement kiln dust (CKD) influence the aluminate phase reaction rate. The pore volume is independent of the clinker type, while the pore size distribution is not. [ABSTRACT FROM AUTHOR]

Silty soil has the characteristics of low natural moisture content and poor viscosity, and the strength and deformation required for foundation engineering can be satisfied by reinforcing and improving the silt. In order to study the reinforcement and improvement effects of polypropylene (PP) fiber and fly ash (FA) on cement–silty soil, an unconfined compressive strength (UCS) test, scanning electron microscope (SEM) test, and X-ray diffraction (XRD) analysis test were carried out. Cement (mixed amounts are 4%, 8%, 12%, and 16% of dry soil mass) was used as the basic modifier, and PP fiber (mixed amounts are 0%, 0.15%, 0.3%, and 0.45% of dry soil mass) compounded with FA (adding amounts of 0%, 5%, 10%, and 15% of dry soil mass) were used as an external admixture of cement–silty soil to study the mechanical properties, curing mechanism, and microstructure of the modified soil in different ages of 7 d, 14 d, 28 d, and 60 d. The test results show that with the increase in cement and curing age, the UCS of the modified soil increases, and with the increase in the PP fiber and FA, the UCS of the modified soil first increases and then decreases; there is an optimal content of FA and PP fiber, which are 10 and 0.15%, respectively. A large amount of C-S-H and AFt substances are produced inside the modified soil to cover the surface of soil particles or fill in the pores between soil particles, forming a tight spatial network structure and improving the mechanical properties of the cement–soil. The intensity of the diffraction peaks of the mineral components within the modified soils is more influenced by the cement and age, and the effect of FA is weaker. The stress–strain curve of the modified soil is divided into elastic stage, plastic deformation stage, and strain-softening stage, and the specimens in each stage have corresponding deformation characteristics. By analyzing the behavioral characteristics and curing improvement mechanism of modified soil from the duo perspective of macro-mechanical properties and microstructural composition, it can provide some basis for the engineering application of silty soil. [ABSTRACT FROM AUTHOR]

The vast spread of multidrug-resistant bacteria has encouraged researchers to explore new antimicrobial compounds. This study aimed to investigate the phytochemistry and antibacterial activity of Cycas thouarsii R.Br. leaves extract against Klebsiella pneumoniae clinical isolates. The minimum inhibitory concentration (MIC) values of C. thouarsii extract ranged from 4 to 32 µg/mL. The impact of the treatment of the isolates with sub-inhibitory concentrations of C. thouarsii extract was investigated on the bacterial growth, membrane integrity, inner and outer membrane permeability, membrane depolarization, and bacterial morphology using a scanning electron microscope (SEM) and on the efflux activity using qRT-PCR. Interestingly, most K. pneumoniae isolates treated with C. thouarsii extract showed growth inhibition—a decrease in membrane integrity. In addition, we observed various morphological changes, a significant increase in inner and outer membrane permeability, a non-significant change in membrane depolarization, and a decrease in efflux activity after treatment. The phytochemical investigation of C. thouarsii extract revealed the isolation of one new biflavonoid, 5,7,7″,4‴-tetra-O-methyl-hinokiflavone (3), and five known compounds, stigmasterol (1), naringenin (2), 2,3-dihydrobilobetin (4), 4′,4‴-O-dimethyl amentoflavone (5), and hinokiflavone (6), for the first time. Moreover, the pure compounds′ MICs′ ranged from 0.25 to 2 µg/mL. Thus, C. thouarsii could be a potential source for new antimicrobials. [ABSTRACT FROM AUTHOR]