Search

The current applications in the energy sector are based largely on fossil fuels which release greenhouse gas emissions to the atmosphere. To face the issue of global warming, the energy sector has to transfer to and develop sustainable energy solutions that do not release carbon emissions. This is one of the primary motivators for the SDEWES conference as well as for this review, and previous ones, examining the most recent works based on sustainable and green energy production in such fields. The 17th Conference on the Sustainable Development of Energy, Water, and Environment Systems (SDEWES) was held on 6–10 November 2022 in Paphos, Cyprus. The SDEWES conference aims at solving complex and ongoing concerns that approach a long-term perspective and supporting innovative solutions and continuous monitoring and evaluation. This review paper aims at collecting the main presented papers focused on the following hot topics: low-carbon technologies based on renewable and clean-energy systems, including mainly biomass, solar, and wind energy applications; energy storage systems; hydrogen-based systems; energy-saving strategies in buildings; and the adoption of smart management strategies using renewable energy systems. These topics are investigated in order to propose solutions to address the issues of climate change, water scarcity, and energy saving. From the analyzed works, we note that some key issues for sustainable development remain to be further addressed: such as novel and advanced energy storage systems, green hydrogen production, novel low-temperature district heating and cooling networks, novel solar technologies for the simultaneous production of power and high temperature heat, solar desalination for hydrogen production systems, and agrivoltaic systems for the production of power and food. [ABSTRACT FROM AUTHOR]

This paper presents the results of ceramic synthesis in the field of a powerful flux of high-energy electrons on powder mixtures. The synthesis is carried out via the direct exposure of the radiation flux to a mixture with high speed (up to 10 g/s) and efficiency without the use of any methods or means for stimulation. These synthesis qualities provide the opportunity to optimize compositions and conditions in a short time while maintaining the purity of the ceramics. The possibility of synthesizing ceramics from powders of metal oxides and fluorides (MgF2, BaF2, WO3, Ga2O3, Al2O3, Y2O3, ZrO2, MgO) and complex compounds from their stoichiometric mixtures (Y3Al3O12, Y3AlxGa(5−x) O12, MgAl2O4, ZnAl2O4, MgWO4, ZnWO4, BaxMg(2−x) F4), including activators, is demonstrated. The ceramics synthesized in the field of high-energy electron flux have a structure and luminescence properties similar to those obtained by other methods, such as thermal methods. The results of studying the processes of energy transfer of the electron beam mixture, quantitative assessments of the distribution of absorbed energy, and the dissipation of this energy are presented. The optimal conditions for beam treatment of the mixture during synthesis are determined. It is shown that the efficiency of radiation synthesis of ceramics depends on the particle dispersion of the initial powders. Powders with particle sizes of 1–10 µm, uniform for the synthesis of ceramics of complex compositions, are optimal. A hypothesis is put forward that ionization processes, resulting in the radiolysis of particles and the exchange of elements in the ion–electron plasma, dominate in the formation of new structural phases during radiation synthesis. [ABSTRACT FROM AUTHOR]

Fast and heavy inorganic scintillators with suitable radiation tolerance are required to face the challenges presented at future hadron colliders of high energy and intensity. Up to 5 GGy and 5 × 1018 neq/cm2 of one-MeV-equivalent neutron fluence is expected by the forward calorimeter at the Future Hadron Circular Collider. This paper reports the results of an investigation of proton- and neutron-induced radiation damage in various fast and heavy inorganic scintillators, such as LYSO:Ce crystals, LuAG:Ce ceramics, and BaF2 crystals. The experiments were carried out at the Blue Room with 800 MeV proton fluence up to 3.0 × 1015 p/cm2 and at the East Port with one MeV equivalent neutron fluence up to 9.2 × 1015 neq/cm2, respectively, at the Los Alamos Neutron Science Center. Experiments were also carried out at the CERN PS-IRRAD proton facility with 24 GeV proton fluence up to 8.2 × 1015 p/cm2. Research and development will continue to develop LuAG:Ce ceramics and BaF2:Y crystals with improved optical quality, F/T ratio, and radiation hardness. [ABSTRACT FROM AUTHOR]

Lung cancer remains the leading cause of cancer-related mortality worldwide, with non-small cell lung cancer (NSCLC) constituting 85% of cases. Among NSCLCs, squamous cell carcinoma (SqCC) is strongly associated with smoking. However, lung cancer in never smokers (LCINS) represents approximately 25% of lung cancer cases globally and shows increasing incidence, particularly in East Asia. LCINS-SqCC is less well-characterized, especially regarding its genomic alterations and their impact on clinical outcomes. We conducted a retrospective analysis over a 20-year period (July 2003–July 2023) at two major tertiary centers in the UK. The cohort included 59 patients with LCINS-SqCC who underwent radical surgical resection. Data collected included demographic information, comorbidities, histopathological details, and outcome metrics such as disease-free and overall survival. Molecular sequencing of tumor specimens was performed to identify genomic aberrations. The cohort had a median age of 71 years (IQR 62–77) and a median BMI of 25.4 (IQR 22.8–27.8), with a slight male predominance (53%). The majority of patients (93%) had a preoperative MRC of 1–2. Recurrent disease was observed in 23 patients (39%), and 32 patients (54%) had died at a median follow-up of 3 years. Median disease-free survival was 545 days (IQR 132–1496), and overall survival was 888 days (IQR 443–2071). Preoperative creatinine levels were higher in patients who experienced recurrence (p = 0.037). Molecular analysis identified biallelic SMARCB1 loss in two younger patients, associated with rapid disease progression despite R0 resection. These patients' tumors were PDL1-negative, TTF-1-negative, and positive for cytokeratin, CD56, and p40. SMARCB1-deficient SqCC in never smokers represents a highly aggressive variant with poor disease-free survival, highlighting the importance of integrating advanced molecular diagnostics in clinical practice. This study underscores the necessity for personalized treatment strategies, including targeted therapies such as EZH2 inhibitors and immune checkpoint blockade, to address the unique molecular pathways in SMARCB1-deficient cancers. Further clinical trials are essential to optimize therapeutic approaches for this challenging subgroup of lung cancer. [ABSTRACT FROM AUTHOR]

We present sub-50 fs soliton pulse generation from a diode-pumped Kerr-lens mode-locked laser based on an Yb3+-doped BaF2 crystal. Utilizing a spatially single-mode, fiber-coupled InGaAs laser diode at 976 nm as a pump source, the Yb:BaF2 laser generates pulses as short as 46 fs at 1060.1 nm with an average output power of 45 mW at a pulse repetition rate of ~65.6 MHz via soft-aperture Kerr-lens mode locking. To the best of our knowledge, this represents the first demonstration of Kerr-lens mode-locked operation of the Yb:BaF2 crystal, as well as the shortest pulse duration ever achieved from any diode-pumped mode-locked laser based on an Yb3+-doped alkaline-earth fluoride crystal. [ABSTRACT FROM AUTHOR]

TeO2-BaF2-Er2O3-Dy2O3 laser glasses were prepared using the melt-quenching method. The bound water that can capture the excited state energy was reduced by physical and chemical methods. We did not observe a significant Er3+ emission peak at 2.7 μm in fluorescence spectra, which may be due to the efficient energy transfer process (ET2). Meanwhile, we found a broadband gain span of approximately 400 nm in fluorescence spectra at the 2.85 μm band, attributed to the 'vector summation' of the energy level radiation transition and the change of the glass network. Subsequently, we explored the structural properties of the glass. The results indicated that the Gaussian peak located at 250 cm−1 drifts toward 370 cm−1, which may be caused by the fracture or recombination of Te-O-Te and a decrease in the bridge oxygen content with the increasing concentration of Er2O3. The topology cage structure around the luminescence center of rare earth ions is changed and the stability of the optically active center is enhanced, finally contributing to the enhancement of luminescence. Meanwhile, the maximum σemi and gain coefficient of Dy3+ reach up to 7.22 × 10−21 cm2 and 7.37 cm−1, respectively. The comprehensive results show that the fluorotellurite glass designed in this study is expected to be a gain medium for mid-infrared lasers in remote sensing monitoring, military, and other fields. [ABSTRACT FROM AUTHOR]

A series of CoCrFeNiMn high-entropy alloy matrix self-lubricating composites were prepared by spark plasma sintering. The composites are composed of an FCC phase, Cr7C3, Ag, and eutectic fluoride BaF2/CaF2 phases. The microstructure of the composites is uniform. The additional phases distribute along the boundary of equiaxed grains of the FCC phase. The compressive yield strength and fracture toughness decrease with the increase of eutectic fluoride BaF2/CaF2. The composites are susceptible to brittle cleavage fracture. [ABSTRACT FROM AUTHOR]

The aim of image-based localization (IBL) is to localize the real location of query image by matching reference image in database with GNSS-tags. Popular methods related to IBL commonly use street-level images, which have high value in practical application. Using street-level image to tackle IBL task has the primary challenges: existing works have not made targeted optimization for urban IBL tasks. Besides, the matching result is over-reliant on the quality of image features. Methods should address their practicality and robustness in engineering application, under metropolitan-scale. In response to these, this paper made following contributions: firstly, given the critical of buildings in distinguishing urban scenes, we contribute a feature called Building-Aware Feature (BAF). Secondly, in view of negative influence of complex urban scenes in retrieval process, we propose a retrieval method called Patch-Region Retrieval (PRR). To prove the effectiveness of BAF and PRR, we established an image-based localization experimental framework. Experiments prove that BAF can retain the feature points that fall on the building, and selectively lessen the feature points that fall on other things. While this effectively compresses the storage amount of feature index, we can also improve recall of localization results; implemented in the stage of geometric verification, PRR compares matching results of regional features and selects the best ranking as final result. PRR can enhance effectiveness of patch-regional feature. In addition, we fully confirmed the superiority of our proposed methods through a metropolitan-scale street-level image dataset. [ABSTRACT FROM AUTHOR]

Alternative techniques have been investigated for effectiveness in caries removal because conventional metallic dental burs can lead to an excessive loss of sound tissue. The aim of the present study is to realize a preliminary approach in obtaining effective polymer mixtures for polymeric bur development, capable of removing primary dental caries using combinations of polymers to ensure the requirements for such instruments, but also a greater compatibility with the teeth structure. This study assessed the main mechanical properties, water sorption, solubility and microscopic structure of four new polymer mixture recipes to provide essential features in obtaining experimental self-limited dental burs. Two mixtures have in their composition polymer mixtures of Bis-phenol A diglycidyl ether dimethacrylate/Triethylene glycol dimethacrylate/Urethane dimethacrylates (R1, R2), and two other mixtures have Bis-phenol A diglycidyl ether dimethacrylate/Polymethyl methacrylate/Methyl methacrylates (R3, R4). The incorporation of nanoparticles into the polymer matrix has become essential due to the need of polymer biocompatibility increasing along with teeth surface remineralization, so that the powder charge was added to four recipes, such as 5% glass with BaF2 and 0.5% graphene with silver particles. All data sets were analyzed using the One-Way ANOVA test. R3, R4 showed higher compressive strength and diametrical compression values; these values increased when glass and graphene were added. Moreover, the addition of glass particles lead to an increase in flexural strength. Regarding the sorption, sample R3 had the most significant differences between day 69 and the rest of the investigation days, while the solubility varied at different intervals. From the mechanical evaluation, we could conclude that the Bis-GMA/PMMA/MMA mixtures fit the mechanical characteristics supported by polymer burs, following future studies regarding their use on the affected dentin. [ABSTRACT FROM AUTHOR]

Simple Summary: The generation of an artificial intestine could minimize the use of in vivo trials, which are presently necessary for testing aquafeeds. As well as being lengthy and expensive, they also require the use of many animals. Furthermore, although in vivo screening allows for a precise evaluation of the final effect of each feed, it does not improve our basic knowledge of the cellular and molecular mechanisms that determine the end results. This, in turn, severely limits our ability to understand and predict the biological value of ingredients, both individually and in differing combinations thereof. To circumvent these constraints, we previously derived and characterized two novel cell lines from the proximal (RTpi-MI) and distal intestine (RTdi-MI) of rainbow trout (Oncorhynchus mykiss), demonstrating that the two cell lines retain the main properties of the intestinal tracts from which they originate. In the present work, we used these cells to set up a functional intestinal barrier on a permeable membrane support to investigate the digestion and absorption of dietary amino acids in fish feed. The results demonstrate that the procedure we developed enables the quantification of individual amino acids that cross the intestinal wall. This new platform will now be used to screen and select new feed ingredients/formulations. The ever-increasing number and variation of raw materials utilized to provide alternative feed formulations continues to allow for a more sustainable and flexible approach. Testing all these options in vivo is still the most robust and reliable manner to pick the best raw material candidates, but it requires the use of large numbers of animals and is time-consuming and expensive. Therefore, we are developing an in vitro platform that can provide a reliable evaluation of new ingredients. The main aim of this work was to combine an in vitro digestion protocol of extruded, commercially relevant aquafeeds with the exposure of intestinal epithelial cells to the extracted bio-available fraction (BAF). The results show that 250,000 cells/cm2 represents the optimal seeding density and that up to 50% BAF concentration for up to 24 h had no negative effects on the epithelial barrier morphology and function. It is possible to determine amino acid digestibility and bioavailability in all the experimental conditions (with and without BSA, at 25% and 50% dilution) and at all time points (0, 6, and 24 h). However, BAF concentration, the medium used for its dilution, and the length of exposure to the different epithelial cell lines can all influence the results and, therefore, must be selected according to the final aim of the experiment. [ABSTRACT FROM AUTHOR]

Heavy metals (HMs) have the characteristics of high toxicity, long residual time, and difficult degradation, which pose a potential threat to aquatic ecosystems. The distribution and migration of HMs in different media can reflect their potential impact on aquatic ecosystem health. In this study, we analyzed the distribution characteristics of seven HMs (Zn, Cu, Cr, Ni, Hg, As, and Pb) in the water and sediment and five groups of organisms (fish, Crustacean, cephalopod, bivalvia, and gastropoda) in the sea ranching area of Haizhou Bay and explored the regularity of HM accumulation from water and sediments to organisms. The results showed that in the water, Zn and Hg had the smallest concentrations in the nearshore area, Cr had the lowest concentrations in the offshore area, and As, Cu, Pb, and Ni had the lowest concentrations in the central area. In the sediment, Hg had the smallest concentrations in the nearshore area and As, Pb, Cr, Cu, Ni, and Zn had the lowest concentrations in the offshore area; the average contents of seven heavy metals all meet the Class I standard of sediments in China. The concentrations of Cu and Zn in crustaceans were significantly higher than those in fishes (p < 0.05), and As showed a higher enrichment effect in cephalopods. Under the influence of feeding habits and habitat environment, the BAF value of benthic crustaceans and bivalvia accumulated HMs from sediments is high, and the BAF value of fish accumulated HMs from water and sediments is low. Overall, the concentration of HMs in water is high, and HMs in sediments are in good condition, crustaceans and bivalviaa have a strong ability to accumulate HMs from water and sediments, while fish are weak. Therefore, in order to ensure the safety of biological quality, it is necessary to focus on the discharge of heavy metal pollutants near the coast in the future. [ABSTRACT FROM AUTHOR]

Growing concerns over environmental issues and sustainable living have resulted in increased interest in renewable energy and energy efficiency. The real estate market is no exception, with homeowners increasingly considering the market value of green and sustainable buildings, which can offer both energy efficiency and potential health benefits. This study investigates the level of interest among homeowners in investing in renewable energy sources and energy efficiency measures for their homes and how it relates to their perception of the market value of green or sustainable buildings in the real estate market. A survey was conducted in the Paphos urban complex in Cyprus, with 180 participants over the age of 18. The participants were selected through a random sampling method and were representative of the general population in terms of gender, age, and income. Data were collected on their attitudes towards renewable energy sources and energy efficiency, as well as their perceptions of the market value of green buildings. The data collected were analyzed using various statistical methods, including Cronbach's α coefficient, the non-parametric Friedman test, descriptive statistics, and factor analysis, with the Statistical Package for the Social Sciences (SPSS) being used for coding and analysis. Results indicate that 64% of the homeowners surveyed were interested in investing in renewable energy sources, and 72% were interested in energy efficiency measures. Additionally, findings suggest a moderate level of interest (58%) among homeowners in investing in renewable energy sources and that this is positively associated with their perception of the market value of green buildings. Furthermore, homeowners with higher income and education levels tend to be more interested in investing in renewable energy sources and energy efficiency measures and perceive green buildings as having higher market value. This study provides insights into the factors that drive homeowners' investment in renewable energy sources and energy efficiency measures, shedding light on the relationship between homeowners' perceptions of the market value of green buildings and their interest in such investments. [ABSTRACT FROM AUTHOR]

This work aimed to detect changes in trace element chemical speciation in sewage sludge (SS) after the ozonation process. The modified Community Bureau of Reference (BCR) sequential extraction procedure was performed to determine the chemical speciation of trace elements in SS after the ozonation process. To assess potential soil contamination with trace elements from sewage sludge after the ozonation process, the risk assessment code (RAC) coefficient was used. The bioaccumulation factor (BAF) and translocation factor (TF) values were also calculated to characterize the efficiency of trace element accumulation in the studied plant species from soil fertilized with sludges after the ozonation process. Generally, the mean concentration of total trace elements in the SS after the ozonation process was higher, but the differences were statistically significant only in the case of Mn, Cu, Pb, and Cd. The dominant fraction of Fe, Cr, Pb, and Cd was the residual fraction F4, while the extractable/exchangeable fraction F1 was present in the smallest amount. Therefore, in the case of Mn, Zn, and Ni, the ozonation process had a significant impact on the increase in the content of these elements in the F1 fraction. The application of the SS stabilized by ozonation process for maize and wheat fertilization did not significantly affect the bioaccumulation of most of the analyzed metals in aboveground biomass. Higher values of BAF coefficients after the application of ozonated SS were found only in the case of Cu and Ni. In turn, the determined TF coefficients were lower than 1 in most cases. The obtained results showed that the slight change in the concentration of Zn, Mn, and Ni in fraction F1 causes a specific risk of their mobility in the soil environment. It should be noted that due to the variable composition of sewage sludge, an analysis of the content of individual trace elements in chemical fractions should be carried out to assess its actual impact on the environment. This can help to indicate further actions that should be undertaken to limit their negative impact on the environment. [ABSTRACT FROM AUTHOR]

Double-PHD fingers 3 (DPF3) is a BAF-associated human epigenetic regulator, which is increasingly recognised as a major contributor to various pathological contexts, such as cardiac defects, cancer, and neurodegenerative diseases. Recently, we unveiled that its two isoforms (DPF3b and DPF3a) are amyloidogenic intrinsically disordered proteins. DPF3 isoforms differ from their C-terminal region (C-TERb and C-TERa), containing zinc fingers and disordered domains. Herein, we investigated the disorder aggregation properties of C-TER isoforms. In agreement with the predictions, spectroscopy highlighted a lack of a highly ordered structure, especially for C-TERa. Over a few days, both C-TERs were shown to spontaneously assemble into similar antiparallel and parallel β-sheet-rich fibrils. Altered metal homeostasis being a neurodegeneration hallmark, we also assessed the influence of divalent metal cations, namely Cu2+, Mg2+, Ni2+, and Zn2+, on the C-TER aggregation pathway. Circular dichroism revealed that metal binding does not impair the formation of β-sheets, though metal-specific tertiary structure modifications were observed. Through intrinsic and extrinsic fluorescence, we found that metal cations differently affect C-TERb and C-TERa. Cu2+ and Ni2+ have a strong inhibitory effect on the aggregation of both isoforms, whereas Mg2+ impedes C-TERb fibrillation and, on the contrary, enhances that of C-TERa. Upon Zn2+ binding, C-TERb aggregation is also hindered, and the amyloid autofluorescence of C-TERa is remarkably red-shifted. Using electron microscopy, we confirmed that the metal-induced spectral changes are related to the morphological diversity of the aggregates. While metal-treated C-TERb formed breakable and fragmented filaments, C-TERa fibrils retained their flexibility and packing properties in the presence of Mg2+ and Zn2+ cations. [ABSTRACT FROM AUTHOR]

Haemoglobinopathies, including thalassaemias and sickle-cell syndromes, are demanding, lifelong conditions that pose a significant burden to patients, families, and healthcare systems. Despite the therapeutic advances and the resulting improvements in prognosis accomplished in past decades, these patients still face important challenges, including suboptimal access to quality care in areas with developing economies, changing epidemiology due to massive migration flows, an evolving clinical spectrum due to ageing in well-treated patients, and limited access to novel high-cost therapies. We herein describe the organization of healthcare services for haemoglobinopathies in Cyprus--with particular focus on beta-thalassaemia, the most prevalent condition in this region--along with selected patient outcomes. This report aims at underscoring the fact that nationally funded and well-coordinated prevention and care programmes for chronic and complex conditions, such as haemoglobinopathies, with active involvement from patient organizations lead to effective disease control and excellent outcomes in survival, quality of life, social adaptation, and public health savings, and allow timely and effective responses to emerging crises, such as the COVID-19 pandemic. The Cyprus paradigm could therefore serve as a blueprint for the organization or adaptation of haemoglobinopathy programs in other countries since these disorders are still widely occurring. [ABSTRACT FROM AUTHOR]

The current study examines the bioaccumulation potential of Taif rose shrubs by analyzing the shrubs' wastes. f. At Al-Shafa Highland, four farms with plants of different ages were chosen to collect soil samples and vegetative waste (leaves and stems) for morphological and chemical analysis. The tallest stem and largest crown diameter (184.2 and 243.5 cm, respectively) were found in the oldest (20-year-old) shrubs, which also produced the highest biomass of pruning wastes of stems and leaves (3.9 and 1.3 t/ha, respectively). The 10-year-old shrubs gathered the highest concentration of Co and Pb (1.74 and 7.34 mg kg−1) in the stem and the highest Fe, Mn, and Ni (18.55, 18.60, and 9.05 mg kg−1) in the leaves, while the youngest plants (4 years) accumulated the highest Cr and Zn (0.83 and 13.44 mg kg−1) in their leaves. The highest contents of Cd, Cr, Cu, Fe, Mn, Pb, and Zn were found in the oldest Taif rose stem (34.94, 1.16, 36.29, 49.32, 51.22, 24.76, and 32.51 g ha−1), while the highest contents of Co and Ni were found in the stems of plants that were 10 and 12 years old (3.21 and 9.54 g ha−1, respectively). The Taif rose's stem and leaves can absorb the majority of heavy metals that have been studied with BAF values greater than one. Significant relationships between various heavy metals in the soil and the same in the stems (Al, Co, and Pb) and leaves (Co, Fe, Mn, Ni, and Pb) of Taif roses have been observed. According to the current findings, the Taif rose is a promising viable and safe crop for heavy metals phytoremediation if it is grown in polluted soil because there is little to no risk of contamination in the use of its end products, high biomass of pruning wastes, and high efficiency of heavy metal removal. [ABSTRACT FROM AUTHOR]

Observing phenological changes are important for evaluating the natural regeneration process of forests, especially in Mediterranean areas where the regeneration of coniferous forests depends on seeds and the changes in blossoming time are influenced by climate change. The high temporal resolution of Sentinel-1 data allows the time series analysis of synthetic aperture radar (SAR) data, but it is still unknown how these data could be utilised for better understanding forest phenology and climate-related alternations. This study investigates the phenological cycle of Paphos forest, Cyprus using SAR data from 1992 to 2021, acquired by ERS-1/2, Envisat and Sentinel-1. An average phenological diagram was created for each space mission and a more detailed analysis was performed from October 2014 to November 2021, using the higher temporal resolution of Sentinel-1 data. Meteorological data were used to better understand the drivers of blooming alternations. Using the interquartile range (IQR), outliers were detected and replaced using the Kalman filter imputation. Forecasting trend lines were used to estimate the amplitude of the summer peaks and the annual mean. The observation of the average phenology from each satellite mission showed that there were two main blooming peaks each year: the winter and the summer peak. We argue that the winter peak relates to increased foliage, water content and/or increased soil moisture. The winter peak was followed by a fall in February reaching the lower point around March, due to the act of pine processionary (Thaumetopoea pityocampa). The summer peak should relate to the annual regeneration of needles and the drop of the old ones. A delay in the summer peak—in August 2018—was associated with increased high temperatures in May 2018. Simultaneously, the appearance of one peak instead of two in the σ V H time series during the period November 2014–October 2015 may be linked to a reduced act of the pine processionary associated with low November temperatures. Furthermore, there was an outlier in February 2016 with very low backscattering coefficients and it was associated with a drought year. Finally, predicting the amplitude of July 2020 returned high relevant Root Mean Square Error (rRMSE). Seven years of time series data are limiting for predicting using trend lines and many parameters need to be taken into consideration, including the increased rainfall between November 2018 and March 2020. [ABSTRACT FROM AUTHOR]

The effect of BaF2, MgF2, and AlF3 on the structural and luminescent properties of gallo-germanate glass (BGG) doped with erbium ions was investigated. A detailed analysis of infrared and Raman spectra shows that the local environment of erbium ions in the glass was influenced mainly by [GeO]4 and [GeO]6 units. Moreover, the highest number of non-bridging oxygens was found in the network of the BGG glass modified by MgF2. The 27Al MAS NMR spectrum of BGG glass with AlF3 suggests the presence of aluminum in tetra-, penta-, and octahedral coordination geometry. Therefore, the probability of the 4I13/2→4I15/2 transition of Er3+ ions increases in the BGG + MgF2 glass system. On the other hand, the luminescence spectra showed that the fluoride modifiers lead to an enhancement in the emission of each analyzed transition when different excitation sources are employed (808 nm and 980 nm). The analysis of energy transfer mechanisms shows that the fluoride compounds promote the emission intensity in different channels. These results represent a strong base for designing glasses with unique luminescent properties. [ABSTRACT FROM AUTHOR]

YBa2Cu3O7−δ (YBCO) thin films with the addition of Cl were prepared on Hastelloy tape by the extremely low fluorine metal-organic deposition (MOD) technique. The composition and microstructure of the present samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). It was revealed that the Cl-added YBCO thin films achieved better texture and density compared with the pure YBCO films. The superconducting properties at magnetic fields were measured using the magnetic property measurement system (MPMS). The results showed that the sample onset transition temperature (Tc, on) did not change significantly after the addition of Cl. The critical current density (Jc) in the presence of YBCO with the addition of Cl increased significantly. Meanwhile, both the Jc and gravitational force (Fp) of the (Cl, Hf) co-added YBCO films were further enhanced at different magnetic fields. The thermodynamic analysis of the BaCO3 removal reaction revealed that the addition of Cl to YBCO formed chlorine compounds, which were effective in avoiding the formation of BaCO3. Further, the calculation results of the Gibbs free energy at different pressure quotients showed that the stability of the relevant chlorine compounds occurred in the order of BaCl2 > CuCl2 > YCl3 and the oxidation of BaCl2 to BaO required a higher temperature compared to BaF2, implying the potential advantages of inhibiting the a-axis growth. [ABSTRACT FROM AUTHOR]

In the present research work, we have theoretically analyzed the photonic band-gap properties of one-dimensional photonic structures composed of polycarbonate and non-glass materials. These photonic structures, PC1, PC2, PC3 and PC4, are composed of alternating layers of polycarbonate/Al2O3, polycarbonate/MgF2, polycarbonate/BaF2 and polycarbonate/TiO2 materials, respectively. The period of each photonic structure is made up of a thin non-glass material layer sandwiched between two identical polycarbonate layers. The transfer matrix method has been used to investigate the transmission properties of PC1 to PC4. The comparison between the transmission spectra of PC1 to PC4 shows that the polycarbonate and TiO2-based photonic structure (PC4) possess three PBGs of zero transmission located at far-ultraviolet, visible and near-infrared regions of the electromagnetic spectrum at normal and oblique incidence (θ0 = 55°), both corresponding to TE wave only. The index of refraction of all five materials used in this study was obtained by applying the Sellmeier-type dispersion relationship to ensure accuracy in the results. The purpose of selecting polycarbonate along with Al2O3, TiO2, MgF2 or BaF2 as constituent materials of these photonic structures is due to the heat resistance properties of polycarbonate and the unique optical properties of oxide and fluoride materials with wide transparency from the ultraviolet to the near-infrared regions of the electromagnetic spectrum. The proposed work can be used to design some influential wavelength-selective reflectors composed of 1D PCs behind the active region of the solar cells for improving the photovoltaic performance of solar panels. This study can further be utilized for the fabrication of advanced solar cell designs consisting of 1D photonic mirror-based luminescence and reflection concentrators. The low temperature problem which arises in satellites may also be overcome with the help of smart windows based on the proposed multilayer structures. [ABSTRACT FROM AUTHOR]

The Mediterranean Sea is subjected to a high anthropic pressure, which determines direct or indirect discharges of persistent organic pollutants deriving from intensive industrial activities. These compounds could easily enter and contaminate the whole marine compartment, with possible transfers (and contamination) among water, sediment and biota. Based on the above-mentioned assumptions, in this work we studied the presence of 16 polycyclic aromatic hydrocarbons (PAHs) and 14 dioxin and non-dioxin-like polychlorinated biphenyls (PCBs) in the neritic protected marine area of the Southern Ligurian Sea, affected by the impact of human activities. The study was focused on the possible partition of micropollutants within seawater, sediment and zooplankton. Results showed that both seasonal and anthropic causes strongly affect contaminant transfer behaviors, with summertime periods more impacted by PAH and PCB contamination. Regarding the PAH contamination, low molecular weight congeners were mainly detected in the target matrices, revealing concentrations up to 1 µg/L in seawater (anthracene), 250 µg/Kg in sediments (benzo[b]fluoranthene) and 2.3 mg/Kg in carnivorous copepods. Concerning PCBs, only few congeners were detected in the matrices studied. To better understand the occurrence of preferential bioaccumulation pathways in zooplankton, partition studies were also performed in several taxa (hyperbenthic Isopoda, holoplanktonic crustacean copepods and ichthyoplankton) through the calculation of BAF values, observing that both living and feeding habits could influence the bioaccumulation process. [ABSTRACT FROM AUTHOR]

Featured Application: laser surface-processing. Monocrystalline barium fluoride (BaF2) slab targets were irradiated by focused 46.9-nm laser radiation at various fluence levels above the ablation threshold. Well-developed ablation patterns with sharp edges were studied by AFM (atomic force microscopy). Their inner surfaces were uniformly covered by periodic structures. The spatial period of the ripples depends on the laser fluence. When the sample is rotated by 45°, the orientation of the grating-like structure changes accordingly. Thus, the grating vector of the periodic structure seems to be coupled to the crystallographic planes of the single crystal. This means that the XUV-laser induced ripples reported here differ from LIPSS (laser-induced periodic surface structures) associated with interference phenomena occurring on illuminated surfaces. Therefore, other mechanisms are discussed to explain the formation of the periodic nanostructures reported in this article. [ABSTRACT FROM AUTHOR]

This study aims to investigate how alternations of the land surface temperature (LST) affects the normalized difference vegetation index (NDVI) in Paphos forest, Cyprus, using Landsat-5 and Landsat-8 imagery for the time periods 1993–2000 and 2013–2018, respectively. A total of 262 Landsat images were processed to compute the mean monthly NDVI and LST values and create a time series. Using the Cook's distance, the effect of missing values in the analysis of the time series were examined. Results from the cross-correlation and cross-variograms, decomposition model, and the BFAST algorithm were compared to produce reliable conclusions on forest changes and satellite, meteorological, and environmental data were combined to interpret the changes that occurred inside the forest. The decomposition analysis showed a decrease of 2.7% in the LST for the period 1993–2000 and an increase of 4.6% in the LST during the period 2013–2018. The NDVI trend is negatively correlated to the LST trend for both time periods. An increase in the LST trend was identified in November 1998 as well as in the NDVI trend in October 1994 and May 2014 that was caused by favorable climatic conditions. An increase in the NDVI trend from May 2014 to December 2015 may be related to reduced pityocampa attacks. An abrupt decrease was detected in December 2015 that was probably caused by the locust invasion that occurred in the island earlier that year. A positive correlation appears for LST and NDVI variables for time lags 4, 5, 6, 7, and 8 months. Overall, it was shown that LST and NDVI analysis is very promising for identifying potential forest decline. [ABSTRACT FROM AUTHOR]

Maturing male germ cells undergo a unique developmental process in spermiogenesis that replaces nucleosomal histones with protamines, the process of which is critical for testicular development and male fertility. The progress of this exchange is regulated by complex mechanisms that are not well understood. Now, with mouse genetic models, we show that barrier-to-autointegration factor-like protein (BAF-L) plays an important role in spermiogenesis and spermatozoal function. BAF-L is a male germ cell marker, whose expression is highly associated with the maturation of male germ cells. The genetic deletion of BAF-L in mice impairs the progress of spermiogenesis and thus male fertility. This effect on male fertility is a consequence of the disturbed homeostasis of histones and protamines in maturing male germ cells, in which the interactions between BAF-L and histones/protamines are implicated. Finally, we show that reduced testicular expression of BAF-L represents a risk factor of human male infertility. [ABSTRACT FROM AUTHOR]

This research investigated the combined use of sewage sludge (SS) and plant growth-promoting rhizobia (PGPR) for Ridge gourd (Luffa acutangula (L.) Roxb.) cultivated under field conditions. The different treatments of SS and PGPR such as 0% (soil as control), 5% SS, 5% SS + PGPR, 10% SS, and 10% SS + PGPR were applied to assess their impacts on seedling growth, biochemical response, and yield performance of Ridge gourd. The results showed that the highest seedling emergence (92.3 ± 2.1%), fresh biomass (9.6 ± 0.3 g), growth rate (1.4 ± 0.1 g/day), seedling length (15.5 ± 0.3 cm), root length (10.4 ± 0.3 cm), total chlorophyll (3.2 ± 0.1 mg/g), crop yield (13.8 ± 0.1 kg/plant), and average crop yield per harvest (2.8 ± 0.1 kg/plant) were observed in 10% SS + PGPR treatment. The enzyme activities of superoxide dismutase (SOD; µg/g) and catalase (CAT: µg/g) were significantly lowered after PGPR inoculation in higher SS treatments. The results of principal component (PC) and Euclidian clustered distance analyses showed a positive influence of SS dose on soil nutrient availability and Ridge gourd's growth, biochemical responses, and yield performance. Moreover, the elemental analysis showed that the bioaccumulation factor (BAF < 0.90) and health risk index (HRI < 0.40) of selected metal elements (Cd, Cr, Cu, Fe, Mn, and Zn) were within the permissible limits, indicating consumption of Ridge gourd fruits was safe. The outcomes of this study suggest the potential use of SS and PGPR for improved Ridge gourd production and contribution towards sustainable development goal (SDG) 12 on responsible consumption and production of vegetable crops. [ABSTRACT FROM AUTHOR]

The synthesis and characterization of multicolor light-emitting nanomaterials based on rare earths (RE3+) are of great importance due to their possible use in optoelectronic devices, such as LEDs or displays. In the present work, oxyfluoride glass-ceramics containing BaF2 nanocrystals co-doped with Tb3+, Eu3+ ions were fabricated from amorphous xerogels at 350 °C. The analysis of the thermal behavior of fabricated xerogels was performed using TG/DSC measurements (thermogravimetry (TG), differential scanning calorimetry (DSC)). The crystallization of BaF2 phase at the nanoscale was confirmed by X-ray diffraction (XRD) measurements and transmission electron microscopy (TEM), and the changes in silicate sol–gel host were determined by attenuated total reflectance infrared (ATR-IR) spectroscopy. The luminescent characterization of prepared sol–gel materials was carried out by excitation and emission spectra along with decay analysis from the 5D4 level of Tb3+. As a result, the visible light according to the electronic transitions of Tb3+ (5D4 → 7FJ (J = 6–3)) and Eu3+ (5D0 → 7FJ (J = 0–4)) was recorded. It was also observed that co-doping with Eu3+ caused the shortening in decay times of the 5D4 state from 1.11 ms to 0.88 ms (for xerogels) and from 6.56 ms to 4.06 ms (for glass-ceramics). Thus, based on lifetime values, the Tb3+/Eu3+ energy transfer (ET) efficiencies were estimated to be almost 21% for xerogels and 38% for nano-glass-ceramics. Therefore, such materials could be successfully predisposed for laser technologies, spectral converters, and three-dimensional displays. [ABSTRACT FROM AUTHOR]

Search for doped superconducting topological insulators is of prime importance for new quantum technologies. We report on fabrication of Sr-doped Bi 2 Te 3 single crystals. We found that Bridgman grown samples have p-type conductivity in the low 10 19 cm − 3 , high mobility of 4000 cm 2 V − 1 s − 1 , crystal structure independent on nominal dopant content, and no signs of superconductivity. We also studied molecular beam epitaxy grown Sr x Bi 2 − x Te 3 films on lattice matched (1 1 1) BaF 2 polar surface. Contrary to the bulk crystals thin films have n-type conductivity. Carrier concentration, mobility and c-lattice constant demonstrate pronounced dependence on Sr concentration x. Variation of the parameters did not lead to superconductivity. We revealed, that transport and structural parameters are governed by Sr dopants incorporation in randomly inserted Bi bilayers into the parent matrix. Thus, our data shed light on the structural position of dopant in Bi 2 Te 3 and should be helpful for further design of topological insulator-based superconductors. [ABSTRACT FROM AUTHOR]

The possibility of using complex structure modification for aluminium casting alloys' mechanical properties improvement was studied. The fluxes widely used in the industry are mainly intended for the modification of a single structural component of Al–Si alloys, which does not allow unifying of the modification process in a production environment. Thus, a new modifying flux that has a complex effect on the structure of Al–Si alloys has been developed. It consists of the following components: TiO2, containing a primary α-Al grain size modifier; BaF2 containing a eutectic silicon modifier; KF used to transform titanium and barium into the melt. The effect of the complex titanium dioxide-based modifier on the macro-, microstructure and the mechanical properties of industrial aluminium–silicon casting alloys containing 5%, 6%, 9%, 11% and 17% Si by weight was studied. It was found that the tensile strength (σB) of Al–Si alloys exceeds the similar characteristics for the alloys modified using the standard sodium-containing flux to 32%, and the relative elongation (δ) increases to 54%. The alloys' mechanical properties improvement was shown to be the result of the flux component's complex effect on the macro- and microstructure. The effect includes the simultaneous reduction in secondary dendritic arm spacing due to titanium, the refinement and decreasing size of silicon particles in the eutectic with barium and potassium, and the modifying of the primary silicon. The reliability of the studies was confirmed using up-to-date test systems, a significant amount of experimental data and the repeatability of the results for a large number of samples in the identical initial state. [ABSTRACT FROM AUTHOR]

(1) Indocyanine green angiography (ICG-A) shows the presence of mid-phase hyperfluorescent area in central serous chorioretinopathy (CSCR). However, their exact meaning remains uncertain. (2) The clinical and multimodal imaging findings of 100 patients (133 eyes) with CSCR, including the enhanced-depth-imaging OCT (EDI-OCT), blue-light fundus autofluorescence (BAF), fluorescein and indocyanine green angiography (FA and ICG-A) findings were reviewed. Mid-phase hyperfluorescent plaques (MPHP) were defined as fairly well circumscribed hyperfluorescent regions during the midphase of the ICG-A. The association between MPHP and other clinical/imaging parameters was assessed using a multiple logistic regression analysis. (3) MPHP were detected in 59.4% of eyes with CSCR. The chronic form of the disease, the presence of irregular pigment epithelium detachments (PED) and the retinal pigment epithelium (RPE) changes seen on FA were associated with the presence of MPHP in the multivariate analysis (p = 0.015; p = 0.018 and p = 0.002; respectively). OCT showed RPE bulges or PED in 98.7% of areas with MPHP and BAF showed changes in 57.3% of areas with MPHP. (4) MPHP were associated with a chronic form of CSCR and colocated with PED or RPE bulges. MPHP should be recognized as a sign of early RPE dysfunction before it is detected with BAF. [ABSTRACT FROM AUTHOR]