Search

The NIST selection process for standardizing Post-Quantum Cryptography Mechanisms is currently running. Many papers already studied their theoretical security, but the resistance in deployed device has not been much investigated so far. In particular, fault attack is a serious threat for algorithms implemented in embedded devices. One particularly powerful technique is to use safe-error attacks. Such attacks exploit the fact that a specific fault may or may not lead to a faulty output depending on a secret value. In this paper, we investigate the resistance of various Post-Quantum candidates algorithms against such attacks.

The industry of disposables has undergone a huge revolution in this century owing to the busy lifestyles and technological advancements in its production and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be used to drink water as well as beverages, soups, liquids etc. This paper entirely focuses on increasing the quality factor of production and manufacturing process of these paper cups by adding additional circuitry to the existing machinery to reduce waste of raw materials as well as the per unit cost involved in wastage of electricity. This research work is based on using proximity sensors to sense the materials and molded paper cups infront of machinery and reduce the electric wastage through a relay Mechanism assembly. This is a PLC based live project example of effectively increasing the overall efficiency of the manufacturing plant

For the detection of product color uniformity and seam texture defects in the production process of test paper, detection methods are proposed respectively. For the detection of the color uniformity, a uniformity detection method based on dynamic light correction is proposed. The illumination correction image is used for color dynamic compensation of the test paper image to solve the influence of uneven illumination on the test paper. For the detection of texture defects such as seams, a texture defect detection method based on gray gradient aggregation intensity is proposed. This method uses one-way Gaussian convolution to strengthen features, and then calculates the gradient, divides the region and calculates the gradient extremum aggregation strength to judge texture defects, which can quickly and efficiently find seam defects. The experimental results show that the above methods have obvious effects on the color uniformity and seam detection of the test paper. The color uniformity accuracy rate is 96%, the seam detection accuracy rate is 97%. The total detection time of a single test paper is about 90ms. The algorithm is real-time and accurate, and can be used in actual production detection.

Electromagnetic Fault Injection (EMFI) is a well known method of introducing faults for security analysis of digital devices. Such faults can be seen as analogous to the faults which are known to naturally occur in digital devices, a known problem with designing safety-critical systems.Numerous standards have been developed for safety-critical systems, including the development of standards for increasing the rate of naturally occurring faults using particle sources. In this work, we demonstrate that desktop EMFI tooling can be used to accomplish similar testing, but with more control, effectively speeding up the evaluation process.We demonstrate using EMFI tooling for safety evaluation to recreate a highly publicized safety issue present in an automotive ECU – one that could not easily be recreated with other techniques.

The industry of disposables has undergone an astronomically immense revolution in this century owing to the diligent lifestyles and technological advancements in its engenderment and manufacturing process. Paper cups are one of the widely used products in disposable industry. It has multi utility options that is it can be acclimated to imbibe water as well as beverages, soups, liquids etc. This paper entirely fixates on incrementing the quality factor of engenderment and manufacturing process of these paper cups by integrating adscititious circuitry to the subsisting machinery to truncate waste of raw materials as well as the per unit cost involved in wastage of electricity. There is a necessity to improvise the quality of overall production parameters using automation techniques. Replacing the whole machinery is a very high costing implementation hence economic feasibility of automation can be achieved by adding an additional circuitry and improving the overall perfoemance. This research work is predicated on utilizing proximity sensors to sense the materials and molded paper cups in front of machinery and minimize the electric wastage through a relay Mechanism assembly. This is a PLC predicated live project example of efficaciously incrementing the overall efficiency of the manufacturing plant

Facebook, Twitter, Instagram, and LinkedIn are all popular online social media sites these days. Everyone uses different social media platforms, from children to adults. The use of these social media applications is increasing, which leads to a rise in social media crime. Here is where the word “fake profiles” comes into play; these fake profiles are responsible for distributing misleading details about a particular user or attempting fraudulent activities with bad intentions. Many researchers have been carried in response to the issue of fake profiles that exist in any social media application. There is research available in different directions to get a real problem solution. This paper summarizes all of the research on fake profile identification in social media platforms. This paper gives survey of work, indicating whether the user profile is fake or real.

Paper dating analysis is an important research direction of document inspection, which is widely used in the inspection and identification of cultural relics and ancient books. This article focuses on the analysis of paper dating in ancient books, and proposes a non-destructive inspection and analysis method based on paper fiber texture images. Aiming at the global stacking morphology of paper fibers and the local features of specific types of fiber morphology, we propose a neural network-based hybrid texture feature extraction and representation method: On the one hand, we use convolutional networks to obtain global features of fiber texture; at the same time, we designed a method of extracting and representing local fiber morphological features based on the attention mechanism. By mixing the above two types of features, we realize the extraction and representation of paper fiber features. Furthermore, we use the GRU(Gate Recurrent Unit) model to establish a paper dating time series model and design a new loss function. In order to verify the method, this paper selects 36 domestic books published from 1950 to 2000, and uses the document checker VSC 6000 to collect paper texture images as a dataset, and verifies the effectiveness of the proposed method on this dataset. Experiments prove that the method proposed in this paper has achieved ideal results in paper dating analysis.

In order to realize smart factory which is appeared in the concepts of Society 5.0 and Industry 4.0, wireless Internet of Things (IoT) becomes a key technology. Inside of the factory, there are heavy DATA traffics exist between moving/movable machine tools/robots/automated guided vehicle (AGV) with wireless access point (AP) and high speed moving/rotating objects/materials with wireless sensor node (SN). Currently, wireless systems used for wireless IoT are limited such as wireless-LAN/Bluetooth/RFID. Since these system’s frequency bands are limited and narrow, the interference between these systems becomes severe. In this paper, we propose a simplified beam forming wireless IoT communication using novel Wi-Fi backscatter system to notify the existence of SN who wants to send its DATA to AP. For Wi-Fi AP with beamforming function, knowing the numbers of existing SNs in each beam area will be a help for efficient beam control. This paper describes the Wi-Fi backscatter system in which the SNs backscatter the Wi-Fi signal transmitted from the AP then the AP detects the backscatter signals from SNs and know the existing SN’s number in its beam area. Since this backscatter system uses Wi-Fi modulated signal, the separation of SNs’ backscatter signals from AP’s transmitting Wi-Fi signal becomes complicated. This paper also describes the transceiver architecture of AP which reduces the complexity of signal processing and improves the dynamic range of reception.

Anstract- While wireless technologies are common solutions to the last mile problem for IoT systems, challenges exist with devices that are in remote locations, sparse deployments, have power and cost constraints, and low data applications as the cost of wireless and the supporting infrastructure presents barriers to entry. This work presents a last mile solution relying on smartphones to bridge the gap between the data generation device and the internet. A unique, low-power solution is presented based on QR codes and e-paper displays that allows a user's smartphone to carry the power and processing burden for data transmission. Utilizing the persistent nature of e-paper displays with low power requirements, QR codes can efficiently communicate data with minimal power impacts to a device's power budget and create large communication windows for user data pickup, leveraging the power of the smartphone without the need for extensive user training and costly infrastructure.

In the last several years, we published several papers to address the problem of Face Identification. The techniques employed in those articles were implemented in transform domains. The Discrete Cosine (DCT) and the Discrete Wavelet (DWT) Transforms were utilized, either combined or individually, to extract features which form the final model for each participant in a given dataset. In this paper, we highlight significant parts of our previous works in order to give a fair comparison among all approaches. The results included here are for the following datasets: ORL, YALE, FERET, FEI, Georgia Tech, and Cropped AR. Features are DWT, DCT, energy-based selected DCT-DWT, and combined DCT-DWT coefficients while the classifier is Euclidean distance, either squared or with power of one.

Nowadays, the usage of smartphones keeps increasing day by day and it is also can be used effectively to increase the computational power and the security along with search and rescue. To maintain the attendance records, several organizations are depending on paper-based attendance. Manually recorded attendance for the employees has produced problems that related to information accuracy and workforce performance efficiency. In this paper, reviewed and discussed various methods, applications and systems that can be used by the employer to monitor their staff attendance using fingerprint, Iris, RFID and GPS. The outcome of this survey is getting knowledge on various techniques that used to record and monitor staff’s attendance.

Even current OCR technology has made significant progress with the help of deep learning, rapid identification algorithms for specific information in documents still need elaborate design. In this paper, a lightweight operating framework based on deep neural network is established to deal with the extraction of date and time information from paper worksheets used in transformer station. In the framework, YOLOv4-Tiny is employed to detect the locations of the dates and the time in document images which are mixed with printing and handwritten fonts. Since the handwritten dates in pictures are difficult to segment, a novel lightweight CNN named MobileDateNet is proposed that can recognize the date serially without segmentation. The experimental results show that the identification accuracy of the whole framework reaches 92.1% at the average running speed of 36.5 FPS on an NVIDIA 3090 GPU, ensuring the recognition accuracy and the operating efficiency.

Cloud computing is a new paradigm. In recent years, cloud computing has been a popular model for hosting and providing services, as it has gained great popularity in providing multiple services such as storage and cloud hosting. Moreover, the cloud provides a powerful computing platform that enables many individuals and organizations to perform many tasks such as: use of online storage space, approval on business applications, developing custom computer software, and creating a virtual network environment. In previous years, the number of people using cloud services increased dramatically and a lot of data was stored in cloud computing environments. Meanwhile, data breaches of cloud services are also increasing every year due to hackers who are always trying to exploit security holes in the cloud architecture, so the security problems in these systems are horrific because they store a lot of private and confidential data. In this paper, the authors review security and privacy issues, bottlenecks associated with cloud computing, and the specific security issues in cloud computing layers and vulnerabilities, and how to avoid and control them. This paper helps the reader understand the problems related to cloud computing.

China’s packaging industry has formed a packaging big data system from three aspects: implementing information engineering, building a collaborative symbiosis network platform of packaging information resources, and building an industrial chain knowledge map centered on product chain. Packaging big data visualization design uses big data information acquisition, hierarchical division and management, problem and audience, visual transformation and other thinking modes, and adopts text information visualization, multi-dimensional information visualization, hierarchical relationship visualization and other technologies to realize the visual presentation of packaging industry data information. This paper analyzes the network data, extracts the keywords related to the key elements, and then analyzes the construction method of product paper packaging container automation system based on the keywords extraction algorithm. On the one hand, it emphasizes the importance of big data in online shopping commodity packaging design; on the other hand, it explores new ideas and methods of online shopping commodity packaging design through the application of big data in online shopping commodity packaging design.

As a material, cellulose/paper has attracted significant attention for its fibrous and bendable properties. Paper is a renewable resource with the most common forms coming from trees. This brief article describes efforts to create electronics "on" and "in" paper. Examples of electronics on paper include touch sensors and cold plasma-based sanitizers. The skin-like touch sensors use capacitance and patterned resistive networks for passive, scalable sensing with a reduced number of interconnects. When touched or wetted with water, the interdigitated electrodes in the resistive networks detect significant changes in electrical impedance. The plasma generators with layered and patterned sheets of paper use a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. Examples of electronics in paper include sheets with tunable electrical conductivity and piezoresistive force sensors, along with functionalized paper-based electrodes capable of detecting small proteins and clinically relevant biomarkers. These papertronic devices have the potential to supply multi-functionality to new forms of smart bandages, skin-like sensing, food packaging, and robotic sensing and actuation.

Industrial control systems have strict requirements for time-sensitive applications and clock synchronization services. Performance of such applications is adversely impacted by packet delays and jitters. The impact is especially critical in process industries due to harsh environmental conditions. In this paper, we analyze delays and jitters to assess the performance of time-sensitive applications. To this end, we captured and analyzed round trip delay data retrieved from a paper factory. Analysis shows that a sub-millisecond level average delays and the jitters derived from the observed data are sufficient to meet the minimum 10ms update frequency required for most critical control applications. Moreover, the filtered delay variations at the end devices are less than the recommended 150us, which guarantees an adequate time synchronization accuracy in the factory network. Besides, this analysis can provide significant insights into performance bottlenecks for factory applications.

Forgery of paper invoices and certificates negatively causes huge economic loss every year. In the molding process of paper, plant fibres inside will distribute randomly and form the unique microscopic surface. Accordingly, forensic researchers have presented many techniques to build its feature descriptor for paper anti-counterfeiting. Among those methods, normal vector field and reconstructed surface based on multi-view photos captured by mobile camera have indicated incredibly effectiveness and practicality. However, the inefficiency of existing models using mobile camera is the neck in real time detection scenarios. In this paper, we focus on the efficient microstructure orientation estimation of paper surface for authentication. To address this problem, we investigate the reflection characteristics of rough surface and quantify the light attenuation accurately. Then, we model the entire propagation path of light emitted by flash, and exploit single photo captured by mobile camera to reconstruct microscopic inclination based on beam energy loss. Reduction of required pictures significantly enhances forensics efficiency. Through comparison experiments, we demonstrate that our proposed method can be used for paper discrimination effectively with speedy feature extraction.

In this paper we propose to implements blockchain technology for Internet of Things (IoT) networks that use Practical Byzantine Fault Tolerance (PBFT) consensus algorithm. To eliminate the reliance on a single leader and improve performance, we propose to allow multiple leaders to propose request batches independently and, possibly, concurrently, by using different overlay networks. Nodes participate in parallel consensus rounds without contention, and they only contend with others to reserve the next available spot for the atomic insertion of a new transaction batch or block into the replicated blockchain ledger. We develop an analytical model for the multiple leader PBFT ordering service by using a Discrete-time Markov chain. Our evaluations show that our model outperforms the original multiple entry point PBFT protocol in a wide range of parameter values, and that it scales well with the number of orderer nodes in the PBFT committee and block arrival rate.

Long-term evolution in unlicensed spectrum (LTE-U) can make use of centralized scheduling, interference coordination and other technologies to achieve better spectrum efficiency (SE). As the evolution of cloud computing, mobile edge computing (MEC) sinks the computing and storage capacity from the centralized data center to the edge of the network, which is the key technology to achieve low delay and high speed. However, the traditional centralized scheme in small cell networks (SCNs) structure will bring huge signal overheads. In order to adapt to the complex and changeable network system, this paper proposes a distributed resource and power allocation scheme under MEC environment, which enables small base stations (SBSs) to work autonomously. The SBSs need only little information exchange through the information cloud (IC) and finally obtain the global optimal SE. Simulation results confirm the correctness and effectiveness of the proposed scheme, and demonstrate the superiority of the distributed scheme over the centralized scheme.

The pervasive use of software systems and current threat environment demand that software systems not only survive cyberattacks, but also bounce back better, stronger, and faster. However, what constitutes a modern software system? Where should the security and resilience mechanisms be-in the application software or in the cloud environment where it runs? In this concept paper, we set up a context to pose these questions and present a roadmap to answer them. We describe challenges to achieving resilience and beyond, and outline potential research directions to stimulate discussion in the workshop.

The experiment of quality assurance of polymeric outdoor insulators service life is necessary to be checked the class of wettability by using the digital image processing tools. The image processing can improve its pictorial information for human interpretation, render it more suitable for autonomous machine perception. This paper provides a survey of the recent technology and theoretical concept to explain the development of the Hydrophobicity Class (HC) of porcelain insulator. The hydrophobic properties of the housing material were found degraded to a different extent between field-aged insulators due to differences in material structure and pollution conditions. This paper contributes to the latest development of reviews relating to image processing for the implementation of porcelain insulator hydrophobic systems testing., and their related studies. We categorized the computer vision mainstream into 2 group such as Machine Learning Methods Applied to Digital Image Processing and Deep Learning Methods Applied to Digital Image Processing. Then compare pros/cons in each type of technique. We also provide brief explanation on the up-to-date information about the techniques and their performance.

In modern academic social network, it is very difficult for scholars to find academic papers consistent with their research direction. Time is a critical factor in paper recommendation. As time goes on, the impact of an academic paper would gradually fade. Likewise, the research interests of users may also change. Therefore, we propose a temporal perceptual neural collaborative filtering model that integrates the multi-dimensional features of papers. We conducted our experiments on the dataset from CiteULike, comparing the recommended results by using four time-decay functions and evaluating our model with multiple evaluation indicators. The satisfactory results show that our model is effective in filtering out the expired papers by considering the characteristics of papers and the changes of scholars' interests.

The space-based integrated information network is composed of space-based backbone network, space-based access network and ground-based node network. It is interconnected with the ground Internet and mobile communication network to build a “ global coverage, on-demand access, on-demand service, safe and reliable ” space-based integrated information network system. As an important part of the system, the space-ground laser communication equipment is faced with many problems, such as the integration of multiple modulation systems and the location of different places. In this paper, the related problems are analyzed and verified by experiments. The results show that the system works at 1550nm wavelength, adopts coherent communication system and IM/DD communication system, coherent communication system supports BPSK, QPSK and DPSK modulation format, IM/DD communication system adopts OOK modulation format, the communication rate reaches 5Gbps under the condition of 1E-9 bit error rate.

The traditional space telemetry, tracking, command and communication system works in the radio frequency band. With the improvement on measurement accuracy and communication capacity in space missions, the traditional means have a certain bottleneck in dealing with the development of future space missions. The inherent lightweight, high parallel, high capacity and fine processing capabilities of Optics and microwave photonics show the potential to solve the above problems. This paper summarizes the innovative work of the Southwest China Institute of Electronic Technology in the application of laser measurement and communication integration, microwave photonic RF front-end technology in space telemetry, tracking, command and communication system. The experimental platform is established for verification, the accuracy of ranging and velocity measurement reaches millimeter level at 10Gbps single channel transmission rate with 1E-9 bit error rate under a simulation satellite-ground link. The microwave photonic RF front-end can be compatible with S to Ka band, with a sampling rate of 20Gsps and a signal bandwidth of 5GHz. It is expected to be applied to next generation of space telemetry, tracking, command and communication system or navigation and relay system.

As opposed to multiple-antenna solutions, in-band full-duplex (IBFD) systems can utilize a shared antenna for signal transmission and reception to reduce the device form factor. These single-antenna designs, however, must additionally consider the self-interference (SI) that is generated by antenna impedance-mismatch reflections. This paper investigates the effect of different antenna loads and transmission line lengths for commercially-available magnetic circulator and omnidirectional antenna components operating between 2 and 6 GHz. The results indicate that both the load impedance and the distance between the antenna and interface device can drastically impact the composite SI frequency-selectivity, which influences the overall IBFD system bandwidth.

This paper discusses recent advancements in smart connected biophysical signal sensing technology focusing on the development of wearable biosensors and the use of Electro-Quasistatic Human Body Communication and Edge-Analytics in the human state measurement systems for lower power consumption and physical layer security.

Critical flaws continue to exist at the level of domain, requirement, and/or design specification, and specification verification (i.e. to check whether a specification has desirable properties) is still one of the most important challenges in software/system engineering. CafeOBJ is an executable algebraic specification language system and domain/requirement/design engineers can write proof scores in CafeOBJ for improving quality of specifications by the specification verification. This paper describes advances of the proof scores for the specification verification in CafeOBJ from the author’s point of view.

In this paper, we propose a data augmentation framework for Optical Character Recognition (OCR). The proposed framework is able to synthesize new viewing angles and illumination scenarios, effectively enriching any available OCR dataset. Its modular structure allows to be modified to match individual user requirements. The framework enables to comfortably scale the enlargement factor of the available dataset. Furthermore, the proposed method is not restricted to single frame OCR but can also be applied to video OCR. We demonstrate the performance of our framework by augmenting a 15% subset of the common Brno Mobile OCR dataset. Our proposed framework is capable of leveraging the performance of OCR applications especially for small datasets. Applying the proposed method, improvements of up to 2.79 percentage points in terms of Character Error Rate (CER), and up to 7.88 percentage points in terms of Word Error Rate (WER) are achieved on the subset. Especially the recognition of challenging text lines can be improved. The CER may be decreased by up to 14.92 percentage points and the WER by up to 18.19 percentage points for this class. Moreover, we are able to achieve smaller error rates when training on the 15% subset augmented with the proposed method than on the original nonaugmented full dataset.

Lately, Deep Learning has indicated its capacity by adequately tackling complex learning issues which were not possible previously. Specifically, Convolutional Neural Networks are most generally utilized and have indicated their viability in image detection and recognition problems. Convolutional Neural Networks(CNN) can be used to perform different kinds of tasks. However, to recognize even a single image, billions of calculations are required. For example, ResNet 50 takes 8 billion calculations just to figure out what's in a single image. So we need to find out ways to be able to run that superfast and that's why we need hardware accelerators. In this paper the basic information about Convolutional Neural Networks is provided along with the key operations involved and the brief idea about Field Programmable Gate Arrays(FPGA) is given which enable them to be used for accelerating the inference process of Convolutional Neural Networks. Various techniques which were employed previously for accelerating the Convolutional Neural Networks are discussed. We are focussing on designing a energy efficient Field Programmable Gate Arrays accelerator for accelerating the inference process of Convolutional Neural Networks with reduced latency and increased throughput.

The emerging of information technology (IT)and operational technology (OT) convergence has driven the smart grid technology adoption in the European (EU) energy system for better visibility and automated controllability. On the other hand, the energy system infrastructures can be threaten by the cyber attacks due to the increasing of information and communication technology integration. The cyber vulnerabilities are caused by the increasing of internet connection and the application complexities. It is crucial to identify essential skills in the field of cyber security protection and defense for the students. This paper presents the outcome of a literature review and a workshop with stakeholders from industry and academia about the state of the art and trends in the education of cyber security in smart grids.

One great challenge of modern networks is how to select paths and react to highly variable and demanding traffic patterns. In recent years, emerging networking languages and architectures, such as P4/PISA, have created unprecedented opportunities for rapidly prototyping disruptive solutions in programmable data planes. In this direction, source routing (SR) is a prominent alternative to conventional table-based routing, since it reduces the convergence time of building distributed routing tables. In particular, PolKA explores the polynomial residue number system (RNS) for a fully stateless SR, i.e., no state update on packet headers needs to be conveyed along the route. This paper reports the deployment of PolKA in a continental testbed composed of P4 programmable switches. Results for end-to-end throughput and forwarding latency show that PolKA matches the data plane performance of traditional approaches, while paving the way for further innovative applications by exploring RNS properties in dynamic scenarios.

People re-identification is a fundamental stage in video surveillance systems. This stage is used for determining the labels of the people’s images usually based on their visual similarities. The appearance salience caused by wearing the clothes and carrying objects, with specific colors can be used for improving the performance of re-identification systems. To address the mentioned point, in this paper, we propose a color-based re-ranking process. In the proposed approach first, the input images are semantically segmented as: person’s body, possible carried objects, and background. Then the most frequent colors of person’s body and possible carried objects are used to re-order the ranked results obtained from two commonly used re-identification approaches i.e., Gaussian of Gaussian (GOG) and Hierarchical Gaussian Descriptors (HGDs). Experimental results on various people re-identification datasets show that our proposed re-ranking approach can improve the performance of re-identification systems.

Due to the increasingly growing demand for user identification on cell phones, PCs, laptops, and so on, face anti-spoofing has risen to significance and is an active research area in academia and industry. The detection of the real face then recognize it present an important challenge regarding the techniques that can be used to spoof any recognition system like masks, printed photos. This paper we present an anti-spoofing face method to solve the real-world scenario that learns the target domain classifier based on samples used for training in a particular source domain. Specifically, with the conventional regression CNN, the Spatial/Channel-wise Attention Modules were introduced. Two modules, namely the Spatial-wise Attention Module and the Channel-wise Attention Module, were used at spatial and channel levels to improve local features and ignore the irrelevant features. Extensive experiments on current collections with benchmarks datasets verifies that the recommended solution will significantly benefit from the two modules and better generalization capability by providing significantly improved results in anti-spoofing.

In this work, capacitive touchpads are presented based on fabrication processes that are inexpensive, lab and solvent-free. Pencil and paper have been used to fabricate the sensors, and these materials are economical, biodegradable, and readily available. A touchpad comprising a combination of five sensors has been developed, and analyzed its working by interface controlling for LED's toggle operation. LCD and android app interface have been used to display the result. The sensor's response has been sensed for a gloved finger touch for sensors. The sensor's performance remained consistent, and the functionality was similar to common buttons and sensors. These sensors are recyclable and can be fabricated with ease. This can contribute to potential developments in smart packaging, medical and healthcare applications, and thin human-machine interfaces.

Drowsiness can be dangerous when performing tasks that require constant attention, such as driving a vehicle. Sleepiness is correlated with a variety of physiological variables, such as eye closing, head movements, pulse rate, eye twitch rate, etc. Also, the yawn can be considered as an accurate indicator of drowsiness and fatigue. Yawning detection is very important for the safety purpose of drivers as it will let the driver know if he/she is getting drowsy. Driving at that moment may not be safe. Several automatic yawning detection techniques have been developed for driver's drowsiness monitoring system. Nevertheless, correctly detecting the yawning of the driver and predicting exhaustion in real-time situations is still a crucial challenge. In this paper, we will be reviewing various existing machine learning approaches for driver's yawning detection. In previous approaches, various classical machine learning algorithms such as viola-Jones, contour activation algorithm and SVM have been used for yawning detection, but these approaches failed to predict yawning in realtime situations. Using Deep learning techniques, we can make a real-time yawn detection system with high accuracy. We find that some precious Deep learning algorithms like CNN, RNN, LSTM, Bi-LSTM can detect the patterns with high accuracy. After the comparison of various algorithms and techniques, we find that with the help of Deep learning algorithms the yawning can be detected in real time with high accuracy.

Human recogntion technologies are gaining significant research attention, where the model can be trained to be more precise to recognize the poses performed by objects. Activity identification is a kind of problem, which needs more research consideration and improvement. There is also an increasing need to detect different poses of objects. To tackle the issue, different sensors like Gyroscope and Accelerometer are required to classify the data in the form of images using machine learning algorithms like SVM and CNN. These approaches help us in implementing real-time applicaions such as health monitoring, tracking sports activity and security. The paper also discusses about its benefits, limitations and prominent approach for human activity recognition.

Rate-Splitting Multiple Access (RSMA) is a flexible and robust multiple access scheme for downlink multi-antenna wireless networks. RSMA relies on Rate-Splitting (RS) at the transmitter and Successive Interference Cancellation (SIC) at the receivers. In this work, we study the performance of RSMA in the scenarios related with the important core services of New Radio (NR) and 6G, namely, enhanced Ultra-Reliable and Low-Latency (URLLC) and enhanced Mobile Broadband Communications (eMBB). We present the optimal system designs employing RSMA that target short-packet and low-latency communications as well as robust communications with high-throughput under the practical and important setup of imperfect Channel State Information at Transmitter (CSIT) originating from user mobility and latency/delay (between CSI acquisition and data transmission) in the network. We demonstrate via numerical results that RSMA achieves significantly higher performance than Space Division Multiple Access (SDMA) and Non-Orthogonal Multiple Access (NOMA), and is capable of addressing the requirements for enhanced URLLC and eMBB in 6G efficiently.

We consider an edge computing framework for online distributed learning in UAV swarm, which allows swarm to collect data and train machine learning (ML) models over the air. Usually, UAVs are used as sensors to collect and transmit data to ground for further processing. However, the overhead for raw data transmission are becoming unaffordable as the task gets complex and the timeliness gets increasingly rigorous. Therefore, We have proposed a new distributed online learning scheme to allow each UAV collect data locally as well as perform ML model training onboard. We have theoretically proved the convergence of the ML model to be trained, and the performance gap between central training method and proposed scheme is analyzed. Furthermore, we have bridged the sensing and transmission via the definition of importance of each UAV based on its contribution in training, where we extend the widely-used timeliness metric Age of Information (AoI) to Age of Updates (AoU), and thus the data freshness and data value in training process are combined together. The performance of the proposed distributed learning scheme is validated, and the difference between AoI and AoU are compared via simulations.

This paper is review on image fusion for different technique i.e. Non-subsampled Contourlet Transform (NSCT) and Neural Network (NN). NSCT is the pyramid structure and gives the multiscale feature of the image. NSCT used to directional filtering structure and used to filter bank. Neural network is a progression of calculations that tries to perceive fundamental connections in a bunch of information through an interaction that impersonates the manner in which the human mind works. The implemented algorithm will applied to MRI image and with the help of NN to calculated accuracy. The previous algorithm was work of different technique i.e. principal component analysis, discrete wavelet transorm and curvelet transform. The implemented algorithm will implement MATLAB software and calculate mean square error and peak signal to noise ratio.

This paper proposes an intelligent cockpit based on artificial intelligence technologies such as voice recognition ASR, TTS, NLP, and multi-round dialogue. The cockpit monitors the progress of the distribution network virtual dispatcher and analyzes the decision engine, and replays the virtual dispatcher online. The implementation process and thinking progress of the virtual dispatcher are overall monitored, and the online monitoring and safety monitoring of the operating personnel are supported.

In modern, real-time heterogeneous systems, ensuring the predictability of interconnects is becoming increasingly important. Existing interconnects are mainly designed to achieve high throughput, with their micro-architectures usually based on FIFO queues. This FIFO-based design prevents prioritization of transactions based on their importance, leading to difficulties in ensuring transaction predictability, especially in a system with a large number of system components. In this paper, we introduce AXI-InterconnectRT, a real-time AXI interconnect for heterogeneous SoCs, which redefines the micro-architecture of interconnects by enabling random accesses of buffered transactions and organizing transactions using dedicated hardware units. With the new micro-architecture, AXI-InterconnectRT can manage transactions based on their importance, guaranteeing their predictability.

Time synchronization is a critical task in robotic computing such as autonomous driving. In the past few years, as we developed advanced robotic applications, our synchronization system has evolved as well. In this paper, we first introduce the time synchronization problem and explain the challenges of time synchronization, especially in robotic workloads. Summarizing these challenges, we then present a general hardware synchronization system for robotic computing, which delivers high synchronization accuracy while maintaining low energy and resource consumption. The proposed hardware synchronization system is a key building block in our future robotic products.

Real time operating system (RTOS) is an operating system which is designed to execute tasks in a guaranteed time. In this paper, we introduce SylixOS - a powerful and open source RTOS. As an industrial RTOS, SylixOS has been used in aerospace, military and many more embedded devices. We introduce the development path and some advanced features of SylixOS. In addition, SylixOS also supports the multiprocess. We discuss how SMP scheduling algorithms can be applied in SylixOS. Performance evaluations of SylixOS are presented to assess the real-time efficiency of SylixOS.

Improper Input Validation (IIV) is a software vulnerability that occurs when a system does not safely handle input data. Even though IIV is easy to detect and fix, it still commonly happens in practice. In this paper, we study to what extent developers can detect IIV and investigate underlying reasons. This knowledge is essential to better understand how to support developers in creating secure software systems. We conduct an online experiment with 146 participants, of which 105 report at least three years of professional software development experience. Our results show that the existence of a visible attack scenario facilitates the detection of IIV vulnerabilities and that a significant portion of developers who did not find the vulnerability initially could identify it when warned about its existence. Yet, a total of 60 participants could not detect the vulnerability even after the warning. Other factors, such as the frequency with which the participants perform code reviews, influence the detection of IIV. Preprint: https://arxiv.org/abs/2102.06251. Data and materials: https://doi.org/10.5281/zenodo.3996696.

New generation airborne embedded system has deployed Graphical Processing Units (GPUs) to raise processing capability to meet growing computational demands. Applications in the airborne embedded system have strict real-time constraints. Therefore, it is necessary to accurately predict timing behaviors of those applications. Many previous work propose GPU performance models to estimate the execution time of applications. However, most of those models do not consider the impact of co-execution on the GPU performance. In this paper, we propose a workload-aware GPU performance model to predict the execution time of applications executed concurrently on a single GPU. Experimental results illustrate that the proposed model can achieve a 5.1%-11.6% prediction error in a real airborne embedded hardware platform.

Wireless communication base stations have strong requirements in flexibility, performance and real-time responsiveness. Building an application-specific lightweight LibOS on a general OS is a good technique to make a balance among real-time responsiveness, performance and flexibility. Compared to traditional ext-kernel systems, the fast progress of virtualization technology brings a more efficient implementation of LibOS. In this paper, we propose a virtualization assisted real-time LibOS system named Tenma for wireless Baseband Unit (BBU). In Tenma, lightweight process virtualization, enhanced isolation between host OS and guest OS, interrupt direct-pass and application specific lightweight scheduling are used to guarantee the requirements of performance and real-time responsiveness while keeping system flexibility. The Tenma system is already in commercial deployment. Experiments in practice prove that it can meet the requirements of wireless base station applications.

Internet-of-Things (IoT) devices can only afford very small batteries due to the size, weight, power and cost constraints. On the other hand, long battery life is expected for such devices, either for improving user experience or due to charging limitations. Therefore, it is critical to reduce the energy consumption of IoT devices. A good opportunity is to save energy on the system level, by letting the system to sleep occasionally. In this paper, we introduce Image Partitioning and Incremental Loading (IPIL), an operating-system-level sleep mechanism used in Huawei LiteOS to reduce the energy consumption of an IoT device. IPIL powers off both the CPU and the main memory during sleep to save as much energy as possible. Thus, system data have to be reloaded after the system wakes up, which may take a long time and thus reduce real-time responsiveness. To solve this problem, IPIL partitions the system image into clusters and incrementally loads the clusters on-demand, reducing the amount of data loading and time overhead in the wake-up step. Experimental results show that IPIL outperforms two widely adopted sleep approaches in terms of energy consumption. At the same time, IPIL offers satisfactory responsiveness with very short wake-up delay. We also present a case study on smart watch to demonstrate how battery life, as a core value of wearable devices, can be improved with IPIL provided by LiteOS.

Correctly specifying system requirement verification strategies plays an important role in Real-time embedded and safety-critical systems development. Traditionally, industries are using document-based/textual artefacts to capture system verification strategies in a way that is highly reliant on efficient communications between system requirement engineers and system verification engineers during systems development iterations. This paper describes a Model-Based System Verification Strategy specification framework and Tools used in Rolls-Royce. The contribution of this framework is 1. improving information reusability; 2. reduced risk of system verification and requirement inconsistency and redundancy 3. improved correlation between system requirements and verification artefacts by sharing the same system models 4. automated support for transformation from document-based system verification to model-based verification.