Search

With low voltage (LV) distribution networks increasingly being re-purposed beyond their original design specifications to accommodate low carbon technologies, the ability to accurately calculate their actual spare capacity is critical. Traditionally, within the Great Britain (GB) power system, there has been limited monitoring of LV distribution networks, making this difficult. This paper proposes a method for estimating spare capacity of unmonitored LV networks using demand data from customer Smart Meters. In particular, the proposed method infers existing LV network capacity, as well as losses, across scenarios where only a limited number of customers have Smart Meters installed. Typical daily load profiles across customers with Smart Meters are learned using a Dirichlet sampled Gaussian mixture model (GMM). Learned profiles are then applied to all unmetered customers to estimate network parameters. Method accuracy is assessed by comparing estimations with simulated, fully observed, LV network models. The method is also compared to benchmark models for establishing unobserved demand profiles. Overall, results in the paper show that the proposed method outperforms benchmark models in terms of accurately assessing substation headroom, particularly in scenarios where only 10–50% of customers have Smart Meters installed. [ABSTRACT FROM AUTHOR]

The reduced inertia levels in low-carbon power grids necessitate explicit constraints to limit frequency’s nadir and rate of change during scheduling. This can result in significant curtailment of renewable energy due to the minimum generation of thermal plants that are needed to provide frequency response (FR) and inertia. Additional consideration of fast FR, a dynamically reduced largest loss and under frequency load shedding (UFLS) allows frequency security to be achieved more cost effectively. This paper derives a novel constraint from the swing equation to contain the frequency nadir using all of these services. The expected cost of UFLS is found probabilistically to facilitate its comparison to the other frequency services. We demonstrate that this constraint can be accurately and conservatively approximated for moderate UFLS levels with a second order cone (SOC), resulting in highly tractable convex problems. Case studies performed on a Great Britain 2030 system demonstrate that UFLS as an option to contain single plant outages can reduce annual operational costs by up to $\pounds $ 559 m, 52% of frequency security costs. The sensitivity of this value to wind penetration, abundance of alternative frequency services, UFLS amount and cost is explored. [ABSTRACT FROM AUTHOR]

The foreseen development of large-scale Offshore Windfarms (OWFs) further from the shore dictates that the OWF transmission system must be optimally designed based on Dynamic Thermal Rating (DTR) in order to fully utilize the intermittent nature of the wind and to keep the offshore wind cost-competitive. In this paper, a comprehensive, DTR-based, two-stage stochastic model is presented, which has been developed for investment decision support for OWF size and HVAC transmission systems. Complex DTR models for all the critical HV components are made fit for the mixed-integer linear programming problem, while accounting for the stochasticity in wind generation and component availability. The main decisions incorporate the discrete size of OWFs, HV subsea export cable cross-sections and ratings for transformers and shunt reactors. For validation, an actual testcase OWF off the east coast of U.K. has been used. Results indicate that DTR-based iterative design of OWF and its transmission components can significantly improve the business case, even though transmission efficiency and energy delivered are not maximum for the optimal design [ABSTRACT FROM AUTHOR]

DC technology has gained considerable interest in the medium voltage applications due to the benefits over the AC counterpart. However, to utilize the full capacity of this development, the selection of a suitable power electronic converter topology is a key aspect. From the pool of voltage source converters (VSC's), it is unclear which topology is suitable for multi-megawatt applications at medium voltage dc (MVdc) levels. To address this, the paper proposes a selection guideline based on reliability and optimum redundancy levels of VSCs for MVdc applications. This will be combined with other functional factors such as operational efficiency and return-on-investment. Three candidate multi-level topologies namely three-level neutral point clamped converter (3L-NPC), modular multi-level converter (MMC) and cascaded 3L-NPC (which is being used for the first MVdc link in the U.K.) have been evaluated over two-level-VSC from $\pm$ 10 kV to $\pm$ 50 kV. Results show that with the increase of MVdc voltage level MMC shows better performance whereas at low MVdc voltage levels 3L-NPC is the prominent topology. [ABSTRACT FROM AUTHOR]

In Part I of this paper we have introduced the closed-form conditions for guaranteeing regional frequency stability in a power system. Here we propose a methodology to represent these conditions in the form of linear constraints and demonstrate their applicability by implementing them in a generation-scheduling model. This model simultaneously optimises energy production and ancillary services for maintaining frequency stability in the event of a generation outage, by solving a frequency-secured Stochastic Unit Commitment (SUC). We consider the Great Britain system, characterised by two regions that create a non-uniform distribution of inertia: England in the South, where most of the load is located, and Scotland in the North, containing significant wind resources. Through several case studies, it is shown that inertia and frequency response cannot be considered as system-wide magnitudes in power systems that exhibit inter-area oscillations in frequency, as their location in a particular region is key to guarantee stability. In addition, securing against a medium-sized loss in the low-inertia region proves to cause significant wind curtailment, which could be alleviated through reinforced transmission corridors. In this context, the proposed constraints allow to find the optimal volume of ancillary services to be procured in each region. [ABSTRACT FROM AUTHOR]