Search

This paper introduces realizations of a reconfigurable finite-impulse-response (FIR) filter for simultaneous equalization and lowpass filtering. The proposed structures employ properties of both a variable bandwidth (VBW) filter and a variable equalizer (VE) with an adjustable coefficient using the Farrow structure, therefore they consist of weighted combinations of fixed subfilters. Design procedures using minimax optimization technique are provided. The paper includes a design example and complexity comparisons between the proposed structures of the reconfigurable lowpass equalizer (RLPE) and a common approach of using a regular FIR equalization filter requiring online redesign.

Backscatter communication (BSC) is a promising solution for Internet-of-Things (IoT) connections due to its lowcomplexity, low-cost, and energy-efficient solution for sensors. There are several network infrastructure setups that can be used for BSC with IoT nodes/passive devices. One of them is a bistatic setup where there is a need for high dynamic range and high-resolution analog-to-digital converters at the reader side. In this paper, we investigate a bistatic BSC setup with multiple antennas. We propose a novel algorithm to suppress direct link interference between the carrier emitter (CE) and the reader using beamforming into the nullspace of the CEreader direct link to decrease the dynamic range of the system and increase the detection performance of the backscatter device (BSD). Further, we derive a Neyman-Pearson (NP) test and an exact closed-form expression for its performance in the detection of the BSD. Finally, simulation results show that the dynamic range of the system is significantly decreased and the detection performance of the BSD is increased by the proposed algorithm compared to a system not using beamforming in the CE, which could then be used in a host of different practical fields such as agriculture, transportation, factories, hospitals, smart cities, and smart homes., Funding Agencies|European Union [101013425]; ELLIIT; KAW foundation

In this paper, we consider privacy aspects of wireless federated learning (FL) with Over-the-Air (OtA) transmission of gradient updates from multiple users/agents to an edge server. OtA FL enables the users to transmit their updates simultaneously with linear processing techniques, which improves resource efficiency. However, this setting is vulnerable to privacy leakage since an adversary node can hear directly the uncoded message. Traditional perturbation-based methods provide privacy protection while sacrificing the training accuracy due to the reduced signal-to-noise ratio. In this work, we aim at minimizing privacy leakage to the adversary and the degradation of model accuracy at the edge server at the same time. More explicitly, spatially correlated perturbations are added to the gradient vectors at the users before transmission. Using the zero-sum property of the correlated perturbations, the side effect of the added perturbation on the aggregated gradients at the edge server can be minimized In the meanwhile, the added perturbation will not be canceled out at the adversary, which prevents privacy leakage. Theoretical analysis of the perturbation covariance matrix, differential privacy, and model convergence is provided, based on which an optimization problem is formulated to jointly design the covariance matrix and the power scaling factor to balance between privacy protection and convergence performance. Simulation results validate the correlated perturbation approach can provide strong defense ability while guaranteeing high learning accuracy., Funding Agencies|Security Link; ELLIIT; KAW foundation

Base stations in 5G and beyond use advanced antenna systems (AASs), where multiple passive antenna elements and radio units are integrated into a single box. A critical bottleneck of such a system is the digital fronthaul between the AAS and baseband unit (BBU), which has limited capacity. In this paper, we study an AAS used for precoded downlink transmission over a multi-user multiple-input multiple-output (MU-MIMO) channel. First, we present the baseline quantization-unaware precoding scheme created when a precoder is computed at the BBU and then quantized to be sent over the fronthaul. We propose a new precoding design that is aware of the fronthaul quantization. We formulate an optimization problem to minimize the mean squared error at the receiver side. We rewrite the problem to utilize mixed-integer programming to solve it. The numerical results manifest that our proposed precoding greatly outperforms quantization-unaware precoding in terms of sum rate., Funding Agencies|Knut and Alice Wallenberg Foundation

Previous works on cell-free massive MIMO mostly consider physical-layer and fronthaul transport aspects. How to deploy cell-free massive MIMO functionality in a practical wireless system is an open problem. This paper proposes a new cell-free architecture that can be implemented on top of a virtualized cloud radio access network (V-CRAN). We aim to minimize the end-to-end power consumption by jointly considering the radio, optical fronthaul, virtualized cloud processing resources, and spectral efficiency requirements of the user equipments. The considered optimization problem is cast in a mixed binary second-order cone programming form and, thus, the global optimum can be found using a branch-and-bound algorithm. The optimal power-efficient solution of our proposed cell-free system is compared with conventional small-cell implemented using V-CRAN, to determine the benefits of cell-free networking. The numerical results demonstrate that cell-free massive MIMO increases the maximum rate substantially, which can be provided with almost the same energy per bit. We show that it is more power-efficient to activate cell-free massive MIMO already at low spectral efficiencies (above 1 bit/s/Hz)., Funding Agencies|CELTIC -NEXT project AI4Green; Vinnova, Swedish Innovation Agency

An Intelligent Reflecting Surface (IRS) is an emerging technology for improving the data rate over wireless channels by controlling the underlying channel. In this paper, we describe a novel solution for IRS configuration to maximize the data rate over wideband channels. The optimization is obtained by online training of a deep generative neural network. Inspired by related works in image processing, this network is randomly initialized and acts as a regularization term for the optimization process since the structure of the generator is sufficient to capture a great deal of IRS statistics prior to any learning. In contrast to recent deep learning techniques for IRS configuration, the proposed technique does not require an offline training stage and can adapt quickly to any environment. Compared to the previous state-of-the-art algorithm, the proposed method is significantly faster and obtains IRS configurations that achieve higher data transmission rates.

How to manage the interference introduced by the enormous wireless devices is a crucial issue to address in the prospective sixth-generation (6G) communications. The treating interference as noise (TIN) optimality conditions are commonly used for interference management and thus attract significant interest in existing wireless systems. Cell-free massive multiple-input multiple-output (CF mMIMO) is a promising technology in 6G that exhibits high system throughput and excellent interference management by exploiting a large number of access points (APs) to serve the users collaboratively. In this paper, we take the first step on studying TIN in CF mMIMO systems from a stochastic geometry perspective by investigating the probability that the TIN conditions hold with spatially distributed network nodes. We propose a novel analytical framework for TIN in a CF mMIMO system with both Binomial Point Process (BPP) and Poisson Point Process (PPP) approximations. We derive the probability that the TIN conditions hold in close form using the PPP approximation. Numerical results validate our derived expressions and illustrate the impact of various system parameters on the probability that the TIN conditions hold., Funding Agencies|Fundamental Research Funds for the Central Universities [2021YJS001]; National Key R&D Program of China [2020YFB1807201]; National Natural Science Foundation of China [61971027, 61961130391]; Beijing Natural Science Foundation [L202013]; Natural Science Foundation of Jiangsu Province [BK20212002]; Royal Society Newton Advanced Fellowship [NA191006]; Frontiers Science Center for Smart Highspeed Railway System; Center for Industrial Information Technology (CENIIT); Excellence Center at Linkoping-Lund in Information Technology (ELLIIT)

Wireless power transfer (WPT) is an alternative technology to conventional batteries for powering Internet of things (IoT) devices. WPT is especially beneficial in situations when battery replacement is infeasible or expensive. It can also reduce battery-related e-waste. In this paper, we analyze the limits of adopting WPT technology for remote powering of IoT devices. We assume that an IoT device periodically harvests energy from a base station (BS) and transmits a data packet related to the sensor measurement under shadow fading channel conditions. Our goal is to characterize the epsilon-coverage range, where epsilon is the probability of the coverage. Our analysis shows a tradeoff between the coverage range and the rate of sensor measurements, where the maximal epsilon-coverage range is achieved as the sensor measurement rate approaches zero. We demonstrate that the weighted sum of the sleep power consumption and the harvesting sensitivity power of an IoT device limits the maximal e-coverage range. Beyond that range, the IoT device cannot harvest enough energy to operate. The desired rate of the sensor measurements also significantly impacts the epsilon-coverage range. Our results suggest that for an IoT device designed using current technology, the maximal 0.95-coverage range is in the order of 120 m. When high measurement rates are required, the coverage range drops to 50-100 m. Compared to battery-powered IoT devices, WPT is well-suited for medium-range applications plus when battery replacement is costly.

In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and data transmission powers into account. By dividing the RIS into subarrays consisting of multiple RIS elements using the same reflection coefficient, the pilot overhead can be tuned to minimize the energy consumption while maintaining parts of the aperture gain. Our analytical results show that there exists an energy-minimizing subarray size. For small data blocks and when the channel conditions between the BS and UE are favorable compared to the path to the RIS, the energy consumption is minimized using large subarrays. When the channel conditions to the RIS are better and the data blocks are large, it is preferable to use fewer elements per subarray and potentially configure the elements individually., Funding Agencies|Swedish Foundation for Strategic Research [FFL18-0277]

RadioWeaves, in which distributed antennas with integrated radio and compute resources serve a large number of users, is envisioned to provide high data rates in next-generation wireless systems. In this paper, we develop a physical layer abstraction model to evaluate the performance of different RadioWeaves deployment scenarios. This model helps speed up system-level simulators of the RadioWeaves and is made up of two blocks. The first block generates a vector of signalto-interference-plus-noise ratios (SINRs) corresponding to each coherence block, and the second block predicts the packet error rate corresponding to the SINRs generated. The vector of SINRs generated depends on different parameters such as the number of users, user locations, antenna configurations, and precoders. We have also considered different antenna gain patterns, such as omni-directional and directional microstrip patch antennas. Our model exploits the benefits of exponential effective SINR mapping (EESM). We study the robustness and accuracy of the EESM for RadioWeaves., Funding Agencies|European Union [101013425]

In this work, we consider a Federated Edge Learning (FEEL) system where training data are randomly generated over time at a set of distributed edge devices with long-term energy constraints. Due to limited communication resources and latency requirements, only a subset of devices is scheduled for participating in the local training process in every iteration. We formulate a stochastic network optimization problem for designing a dynamic scheduling policy that maximizes the time-average data importance from scheduled user sets subject to energy consumption and latency constraints. Our proposed algorithm based on the Lyapunov optimization framework outperforms alternative methods without considering time-varying data importance, especially when the generation of training data shows strong temporal correlation., Funding Agencies|ELLIIT; Knut and Alice Wallenberg (KAW) Foundation; Zenith

It is well known that GNSS receivers are vulnerable to jamming and spoofing attacks, and numerous such incidents have been reported in the last decade all over the world. The notion of participatory sensing, or crowdsensing, is that a large ensemble of voluntary contributors provides measurements, rather than relying on a dedicated sensing infrastructure. The participatory sensing network under consideration in this work is based on GNSS receivers embedded in, for example, mobile phones. The provided measurements refer to the receiver-reported carrier-to-noise-density ratio (C/N-0) estimates or automatic gain control (AGC) values. In this work, we exploit C/N-0 measurements to locate a GNSS jammer, using multiple receivers in a crowdsourcing manner. We extend a previous jammer position estimator by only including data that is received during parts of the sensing period where jamming is detected by the sensor. In addition, we perform hardware testing for verification and evaluation of the proposed and compared state-of-the-art algorithms. Evaluations are performed using a Samsung S20+ mobile phone as participatory sensor and a Spirent GSS9000 GNSS simulator to generate GNSS and jamming signals. The proposed algorithm is shown to work well when using C/N-0 measurements and outperform the alternative algorithms in the evaluated scenarios, producing a median error of 50 meters when the pathloss exponent is 2. With higher pathloss exponents the error gets higher. The AGC output from the phone was too noisy and needs further processing to be useful for position estimation., Funding Agencies|Security Link; SSF-SURPRISE

Positioning with high precision and reliability can be provided by 5G cellular networks in environments where satellite positioning is not available or reliable. The accuracy that can be achieved by classical methods like triangulation and trilateration however degrades significantly under non line of sight (NLOS) conditions. The problem can be mitigated with increasingly dense deployments of network transmission and reception points (TRPs), but that is both impractical and costly. As an alternative, this study investigates if multipath propagation of radio signals can be exploited to improve positioning accuracy and reduce the necessary deployment density. With 3GPP Rel. 17 new signaling support has been introduced to report the propagation delay, corresponding to the length, of multiple paths between the user equipment (UE) and a network TRP. The length of a multipath can, in combination with a partially known map of the environment, give additional information about the UE position. In this study we develop multipath-assisted tracking algorithms and evaluate their performances in realistic simulations using 3GPP standardized positioning reference signals and measurements in an indoor factory environment. Our evaluations show that multipath-assisted algorithms can achieve an accuracy below 0.9 m in 90% of the cases, which is more than tenfold better than a conventional LOS based algorithm. Moreover, one algorithm variant also shows an ability to track a UE using very few TRPs.

The number of wireless devices is drastically increasing, resulting in many devices contending for radio resources. In this work, we present an algorithm to detect active devices for unsourced random access, i.e., the devices are uncoordinated. The devices use a unique, but non-orthogonal preamble, known to the network, prior to sending the payload data. They do not employ any carrier sensing technique and blindly transmit the preamble and data. To detect the active users, we exploit partial channel state information (CSI), which could have been obtained through a previous channel estimate. For static devices, e.g., Internet of Things nodes, it is shown that CSI is less time-variant than assumed in many theoretical works. The presented iterative algorithm uses a maximum likelihood approach to estimate both the activity and a potential phase offset of each known device. The convergence of the proposed algorithm is evaluated. The performance in terms of probability of miss detection and false alarm is assessed for different qualities of partial CSI and different signal-to-noise ratio., Funding Agencies|European Union [101013425]

We discuss possible definitions of structural balance conditions in a network with preference orderings as node attributes. The main result is that for the case with three alternatives (A, B, C) we reduce the (3!)(3) = 216 possible configurations of triangles to 10 equivalence classes, and use these as measures of balance of a triangle towards possible extensions of structural balance theory. Moreover, we derive a general formula for the number of equivalent classes for preferences on n alternatives. Finally, we analyze a real-world data set and compare its empirical distribution of triangle equivalence classes to a null hypothesis in which preferences are randomly assigned to the nodes., Funding Agencies|ELLIIT; KAW foundation

Deep learning (DL) is a powerful technique for many real-time applications, but it is vulnerable to adversarial attacks. Herein, we consider DL-based modulation classification, with the objective to create DL models that are robust against attacks. Specifically, we introduce three defense techniques: i) randomized smoothing, ii) hybrid projected gradient descent adversarial training, and iii) fast adversarial training, and evaluate them under both white-box (WB) and black-box (BB) attacks. We show that the proposed fast adversarial training is more robust and computationally efficient than the other techniques, and can create models that are extremely robust to practical (BB) attacks., Funding Agencies|Security-Link; Start-Up Research Grant of IIT Guwahati

Radio frequency (RF) wireless power transfer (WPT) is a promising technology for 6G use cases. It enables a massive yet sustainable deployment of batteryless energy neutral (EN) devices at an unprecedented scale. Recent research on 6G is exploring high operating frequencies up to the THz spectrum, where antenna arrays with large apertures are capable of forming narrow, "laser-like" beams. At sub-10 GHz frequencies, physically large antenna arrays are considered that are operating in the array near field. Transmitting spherical wavefronts, power can be focused to a focal point rather than a beam, which allows for efficient and radiation-safe WPT. We formulate a multipath channel model comprising specular components and diffuse scattering to find the WPT power budget in a realistic indoor scenario. Specular components can be predicted by means of a geometric model. This is used to transmit power via multiple beams simultaneously, increasing the available power budget and expanding the initial access distance. We show that exploiting this "beam diversity" reduces the required fading margin for the initial access to EN devices., Funding Agencies|European Unions Horizon 2020 research and innovation programme [101013425]

GNSS receivers are vulnerable to jamming and spoofing attacks, and numerous such incidents have been reported worldwide in the last decade. It is important to detect attacks fast and localize attackers, which can be hard if not impossible without dedicated sensing infrastructure. The notion of participatory sensing, or crowdsensing, is that a large ensemble of voluntary contributors provides the measurements, rather than relying on dedicated sensing infrastructure. This work considers embedded GNSS receivers to provide measurements for participatory jamming detection and localization. Specifically, this work proposes a novel jamming localization algorithm, based on participatory sensing, that exploits AGC and C/N-0 estimates from commercial GNSS receivers. The proposed algorithm does not require knowledge of the jamming power nor of the channels, but automatically estimates all parameters. The algorithm is shown to outperform similar state-of-the-art localization algorithms in relevant scenarios., Funding Agencies|Security Link