Search

In this study, activated carbon cloth (ACC) derived from cypress fruit was employed to investigate the adsorption of Pb2+, Cd2+, and Co2+ from synthetic aqueous systems. The correlation between adsorption features (pH, adsorbent dosage, temperature, initial ion concentration, and contact time) and adsorbent removal efficiency was investigated. Analysis by FT-IR, SEM, and EDS was employed to confirm the adsorption of metal ions onto the ACC. Results revealed the best adsorption efficiencies for heavy metal ions were attained at pH = 7, 11, 6; the adsorbent dosage of 0.06, 0.08, and 0.04 g for Pb2+, Cd2+, and Co2+, respectively; the ion initial concentration of 50 mg·L−1 for Pb2+ and 70 mg·L−1 for both Co2+ and Cd2+; and contact time of 90 minutes for both Pb2+ and Co2+ and 120 minutes for Cd2+. Kinetic studies exposed the second-order adsorption of all aforementioned heavy metal ions. Additionally, the equilibrium data were fitted by Langmuir and Freundlich's isotherms, while the former performed better than the latter. The maximum adsorption capacity values for Pb2+, Co2+, and Cd2+ were attained to 81.87, 55.30, and 117.3 mg·g−1, respectively. Considering the thermodynamic data, the studied processes were exothermic and spontaneous. [ABSTRACT FROM AUTHOR]

Health implications for the population due to consuming contaminated crops have been a great concern worldwide. This study aimed to measure the levels of potential toxic elements in lentils and their growing soil in Dawunt Woreda, Ethiopia. Accordingly, 15 soil samples along with the lentil samples were collected to measure the level of potential toxic elements, including chromium (Cr), manganese (Mn), iron (Fe), lead (Pb), cadmium (Cd), copper (Cu), and cobalt (Co), by using an inductively coupled plasma optical emission spectrometer and for assessing the potential ecological and human health risk. The wet digestion method using aqua regia (HCl/HNO3 3 : 1) was employed for soil and lentil sample preparation. The mean concentrations of Fe, Mn, Co, Cu, Cd, Pb, and Cr in the lentil sample were 60.4, 9.68, 0.75, 5.7, 0.25, 0.9, and 1.15 mg/kg, respectively. In soil, the mean concentrations of Fe, Mn, Co, Cu, Cd, Pb, and Cr were 649, 19.9, 3.32, 40.0, 15.2, 1.83, and 69.1 mg/kg, respectively. All of the potential toxic metals in agricultural soil and lentil samples were found to be below the reference level set by the World Health Organization, except Cd, in the soil samples. Five single metal and three cumulative pollution index parameters were employed for the data and results showed that Fe, Cu, and Cr moderately pollute the soil and are highly contaminated by Cd. The cumulative pollution indices also confirmed that the extent of soil pollution varied from highly contaminated to moderate contamination. The possible health risks at various exposure routes have also been estimated. The single-metal and cumulative-metals health risks (cancer and noncancer) of adults and children due to chronic exposure to soil and consumption of lentils were estimated using the health quotient and health index values as per the United States Environmental Protection Agency guidelines. Thus, the results revealed no significant adverse health risks (cancer and noncancer) for adults and children. Therefore, the inhabitants in the study area have no significant health impacts due to either the consumption of lentil crops or exposure to agricultural soil particles. [ABSTRACT FROM AUTHOR]

The contamination of aquatic environments by heavy metals can have detrimental effects on fish, impacting their growth and overall health, including the regulation of antioxidant genes. An investigation was carried out to assess the distribution and habitat of Gymnocypris eckloni in the Yellow River basin. Simultaneously, heavy metal concentrations in its habitat and in selected locations within the upper Yellow River were measured. In an effort to explore the potential roles of specific genes in antioxidant responses, G. eckloni was exposed to low concentrations of copper (Cu2+) and lead (Pb2+) for varying durations (12, 24, and 48 hours). The mRNA levels of GeCu/Zn-SOD, GeMn-SOD, GeHsp90, and GeMT were quantified in the gills, kidneys, and liver through qRT-PCR. The findings suggest that the habitat of G. eckloni is generally safe; however, occasional exceedances of safety standards could pose a potential threat to its growth. Importantly, the expression of GeCu/Zn-SOD, GeMn-SOD, GeHsp90, and GeMT exhibited responses to the low concentrations of copper-induced and lead-induced stress. Notably, GeCu/Zn-SOD, GeMn-SOD, and GeMT demonstrated heightened sensitivity to lead compared to copper. Furthermore, the expression of these genes displayed tissue-specific responses under identical metal stress conditions. These results indicate that GeCu/Zn-SOD, GeMn-SOD, GeHsp90, and GeMT genes have the potential to serve as early, sensitive biomarkers for the detection of metal toxicity induced by Cu2+ and Pb2+. This study also provides valuable insights into the functioning of antioxidant genes under oxidative stress in fish. [ABSTRACT FROM AUTHOR]

Contamination of farm produce by toxic heavy metals has become a serious global health concern. These metals can bioaccumulate in plant tissues and are precursors for major public health problems such as cancer and neural impairment. Khat (Catha edulis) also referred to as miraa has the potential to sequester and accumulate both micronutrients and potentially toxic heavy metals in its consumable parts—tender leaves and soft barks of young shoots which are known to possess psychoactive properties when consumed. Therefore, the motivation behind this contribution is to determine the levels of six heavy metals, namely, cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb), iron (Fe), and nickel (Ni) in consumable Meru khat samples, compare these levels with the permissible limits of World Health Organization (WHO) in order to predict associated health risks, and to estimate the noncarcinogenic risks of these metals by total health quotient (THQ) and health index (HI) on khat consumers. 1.0 g of dry ground khat samples was digested in 0.05 M HCl and allowed to stand for 5 hours before being analyzed for heavy metals using inductively coupled plasma atomic emission spectroscopy (ICP-AES). The mean heavy metal concentrations (mg/kg) in dry khat samples of six toxic heavy metals were Cd (7.81 ± 1.56), Cr (15.98 ± 2.22), Cu (15.81 ± 2.84), Fe (97.35 ± 32.67), Ni (0.37 ± 0.02), and Pb (32.36 ± 9.95). Based on the results, the mean levels of Pb, Cd, and Cr exceeded WHO permissible limits. In addition, the Pb and Cd THQ values and the HI of the six heavy metals investigated in the khat samples exceeded the threshold value of 1.0. Furthermore, the THQ and HI values showed that Pb and Cd were potentially the major contributors to noncarcinogenic risks on regular khat consumers. This is a matter of concern on the excessive consumption of Meru khat-based products, which over time may cause a toxicological response. Based on the findings of this study, the use of agrochemicals should significantly be minimized in khat farming. Accordingly, the Meru khat farmers should be sensitized on alternative farming practices that do not potentially cause heavy metal contamination in khat. [ABSTRACT FROM AUTHOR]

The present study evaluates the human health risk of metals in locally consumed herbal preparations used to treat diabetes. Atomic absorption spectroscopy (AAS) was used after microwave-assisted digestion to mineralize the samples. Toxic metal assessment was done by adopting mathematical modeling for carcinogenic and noncarcinogenic risks in the exposed population and comparing the raw results with maximum residue limits (MRLs) set by regulatory authorities. Hazard quotient (HQ) values for Fe, Hg, Cu, Pb, and Zn were recorded above 1. Noncarcinogenic health risks remain in 29% of samples for Fe, 67% of samples for Hg, 17% of samples for Cu, 33% of samples for Pb, and 4% of samples for Zn. Hazard index (HI) values in 33% of samples were above 1. Carcinogenic risks for Pb, Cr, Cd, and Ni were higher than the acceptable limit (1 × 10−6). Carcinogenic health risks exist in 54% of samples for Pb, 58% of samples for Cr, 46% of samples for Cd, and 58% of samples for Ni. MRLs for metals were crossed in samples in varying degrees. This is a harrowing account and may put public health safety at risk. Considering these facts, there should be more investigation into toxic metals in other frequently marketed herbal drugs in the antidiabetic and other therapeutic classes. Pre- and postmarket monitoring strategies for the preparations should also be in place to ensure safe consumption. [ABSTRACT FROM AUTHOR]

In this study, for the first time, the levels of thirteen micro- and macromineral nutrients in the leaves, seeds, and supportive soil of Moringa stenopetala (M. stenopetala) were simultaneously determined using microwave plasma atomic emission spectroscopy (MP-AES). The samples were collected during the arid season, in 2019 from the three main M. stenopetala growing areas in southern Ethiopia (Chano Mile Kebele, Nechisar Kebele, and Konso Special Woreda). A novel digestion method for leaf and seed samples was developed using an optimized acid mixture (2.5 : 0.75 : 0.5 of HNO3, HClO4, and H2O2) at 240°C for 2 hrs and 30 min, resulting in clear and colorless solutions. The method makes the digestion process more efficient by minimizing the reagent volume, reducing digestion temperature and time, and simplifying the overall procedure. The efficiency of the optimized procedure was validated by spiking experiments, and the percentage recovery ranged between 94 and 110%. Under optimized experimental conditions, higher concentrations of essential minerals (K, Na, Ca, and Mg) were observed in the plant leaf and seed samples from the three areas. In addition, significant amounts of trace elements (Fe, Mn, Zn, and Cu) were also found. Importantly, no traces of the toxic elements (Cd and Pb) were detected in any of the analyzed samples, suggesting that the leaves and seeds of M. stenopetala are valuable sources of both micro- and macromineral nutrients and are safe from toxic metals. From a dietary perspective, the seed contains almost comparable concentrations of minerals as the leaves. As a result, the seeds of M. stenopetala can serve as an alternative source of minerals and play a role in overcoming the current global food crisis, particularly in the dry season. Analysis of variance at a 95% confidence level revealed significant differences in the levels of all mineral nutrients between the three sample means except K, Ca, Co, and Cu. Generally, the developed method includes an innovative digestion procedure that minimizes reagent consumption, operates at lower temperatures, and requires shorter digestion times, thereby optimizing resource utilization and maintaining analytical accuracy. Notably, the absence of toxic elements in the MP-AES procedure highlights the safety and reliability of M. stenopetala leaves and seeds as valuable, contamination-free sources of essential nutrients. [ABSTRACT FROM AUTHOR]

Longyan City in Fujian Province is one of China's top-quality tobacco-producing areas and plays an essential role in local economic development. To determine the correlation between heavy metal content in tobacco leaves and soil factors, soil physical and chemical properties and heavy metal contents of lead, cadmium, and copper in tobacco leaves were measured and analyzed by the correlation regression method. The content of lead, cadmium, and copper in soil was determined using hydrochloric acid extraction-AAS and graphite furnace atomic absorption spectrometry. Inductively coupled plasma-mass spectrometry was used to determine heavy metal in tobacco leaf. The findings revealed that the average concentrations of lead, cadmium, and copper in the soil were 12.1, 0.092, and 3.88 mg/kg, respectively. In contrast, the average levels of lead, cadmium, and copper in tobacco leaves were 2.33, 4.89, and 4.35 mg/kg, respectively. The cadmium enrichment coefficient of 54.3 was higher than lead and copper, indicating a greater health risk. Soil pH value was negatively correlated with lead content in tobacco leaf, while potassium and phosphorus nutrient levels were negatively correlated with copper content. In contrast, a positive correlation was established between the presence of organic matter with cadmium content in tobacco leaves. The prediction models of lead, cadmium, and copper in tobacco leaves can be expressed by the regression equation corresponding to each heavy metal as follows: Y Pb = 2.33 − 0.005 ∗ X K + 0.007 ∗ X N − 0.271 ∗ X pH + 0.065 ∗ X Pb ( R 2 = 0.787), Y Cd = 1.55 + 0.012 ∗ X OM − 0.014 ∗ X Cu + 34.6 ∗ X Cd ( R 2 = 0.891), and Y Cu = 4.64 − 0.029 ∗ X P − 0.007 ∗ X K + 0.245 ∗ X Cu ( R 2 = 0.724), respectively. The prediction models above provide an effective predictive tool for assessing heavy metal risk in tobacco leaves using soil properties in the study area. [ABSTRACT FROM AUTHOR]

As a nutritious food, eggs are capable of accumulating heavy metals and are a good indicator of environmental contamination. This study is aimed at determining the levels of heavy metal residues (As, Cd, Hg, and Pb) in hen eggs after applying different cooking methods. In an experimentally designed study, forty-four hen egg samples were selected from 22 best-selling brands of supermarkets in Tehran and categorized into one of four groups (raw, dry-frying, and boiling with and without eggshells). The levels of heavy metal residues were analyzed by using inductively coupled plasma mass spectrometry (ICP-MS). The average levels of heavy metals (As, Cd, Hg, and Pb) in raw samples were 0.307, 1.654, 0.121, and 6.5 (μg.kg-1), respectively. After applying cooking methods, the residue of two heavy metals in boiling without eggshells (As: 0.228 ± 0.197 ; Cd: 1.985 ± 0.037) was lower than boiling with eggshells (As: 0.457 ± 0.918 ; Cd: 2.11 ± 0.223 μg.kg-1), while the dry-frying method had the lowest level of heavy metal residue (As: 0.222 ± 0.109 ; Cd: 1.54 ± 0.223) (p < 0.05) and could be identified as efficient in reducing the amount of these heavy metals. In addition, different cooking methods did not make a significant difference in other heavy metal residues (Hg and Pb). To explain this reduction, two hypotheses can be proposed to explain the reduction of heavy metals after applying different cooking methods. First, the eggshell is permeable; the second is the association of heavy metals bonding with sulfur groups and weight loss due to evaporation. All heavy metal residues were found to be within acceptable permissible thresholds. Therefore, policymakers should protect the health of the population by continuously monitoring heavy metals in foods and prioritizing education and research on how to reduce them in the food chain. [ABSTRACT FROM AUTHOR]

Contamination of the environmental receptors with heavy metals due to mining is a major topical environmental issue in Ghana. This research investigates the possible ecological and human health risks of heavy metal impacts due to mining in the Amansie West District in Ghana. A total of 18 soil samples were taken from the Bontesso illegal mining site in the district and analyzed for the levels of arsenic (As), cadmium (Cd), copper (Cu), nickel (Ni), and lead (Pb) using atomic absorption spectrometry (AAS). From principal component analysis, cluster analysis, and correlation coefficient analysis, the metals are derived from multiple sources, with substantial levels of correlations. Using geo-accumulation index (Igeo), contamination factor (CF), degree of contamination (Cd), pollution load index (PLI), ecological risk index (Er), and noncarcinogenic and carcinogenic risks, respectively, the impacts of As (12.2 mg/kg) and Cd (1.3 mg/kg) are above the WHO stipulated limit. Findings for pollution indices indicate moderate contamination, while HQ < 1 for inhalation and dermal exposure route, except for ingestion which is HQ > 1. Based on the USEPA standard, the carcinogenic risk of the pollutants for humans is higher than the range of 1 × 10−6 to 1 × 10−4. Furthermore, the ingestion route represents the highest contributor to cancer risk with arsenic posing the greatest risk. The results so far suggest that chemical components gradually accumulate and thus emphasize the importance of implementing the necessary mitigation methods to minimize the impacts of illegal mining activities in the study area. [ABSTRACT FROM AUTHOR]

A 120-day growth trial was completed to assess rearing water quality and fish performance in terms of growth, feed efficacy, digestive enzymes, immunity, and antioxidant activity of seabass fed an experimental diet (ED) supplemented with commercial wood charcoal (WC) and activated wood charcoal (AC). Three levels (0, 10, and 20 g) of WC and AC were administered, representing five treatments: control (CD) fish-fed ED without additives, (WC-1) fish-fed ED containing 10 g kg−1 WC, (WC-2) fish-fed ED containing 20 g kg−1 WC, (AC-1) fish-fed ED containing 10 g kg−1 AC, and (AC-2) fish-fed ED containing 20 g kg−1 AC. Three hundred fish (60.12 ± 0.20 g/fish) were stocked in 15 cement tanks (4.0 m × 2.0 m × 1.2 m, water volume 5 m3 each) at 20 fish/tank and a daily feed ration of 3% of body weight. Results revealed significant improvements with increased growth variables (final weight, weight gain, and specific growth rate), decreased FCR, and decreased ammonia levels and heavy metals (Cu, Cd, Fe, Mn, and Zn) content in rearing water, muscle, and liver with fish fed WC and AC supplemented diets. Furthermore, considerable improvements in digestive enzymes, immunity, and antioxidant activity, with enhanced kidneys, liver, intestines, gills, and spleen. Fish fed the WC-1 diet had a higher final weight (171.90 g), better FCR (1.25), and improved internal organs than the other groups. [ABSTRACT FROM AUTHOR]

Fingerprinting techniques, which utilize the unique chemical and physical properties of food samples, have emerged as a promising approach for food authentication and traceability. Recent studies have demonstrated significant advancements in food authentication through the use of fingerprinting methods, such as multivariate statistical analysis techniques applied to trace elements and isotope ratios. However, further research is required to optimize these methods and ensure their validity and reliability in real-world applications. In this study, the inductively coupled plasma mass spectrometry (ICP-MS) analytical method was employed to determine the content of 21 elements in 300 cashew nut (Anacardium occidentale L.) samples from 5 brands. Multivariate statistical methods, such as principal components analysis (PCA), were employed to analyze the data obtained and establish the provenance of the cashew nuts. While cashew nuts are widely marketed in many countries, no universal method has been utilized to differentiate the origin of these nuts. Our study represents the initial step in identifying the geographical origin of commercial cashew nuts marketed in Vietnam. The analysis showed significant differences in the means of 21 of the 40 analyzed elements among the cashew nut samples from the 5 brands, including 7Li, 11B, 24Mg, 27Al, 44Ca, 48Ti, 51V, 52Cr, 55Mn, 57Fe, 60Ni, 63Cu, 66Zn, 93Nb, 98Mo, 111Cd, 115In, 121Sb, 138Ba, 208Pb, and 209Bi. The PCA analysis indicated that the cashew nut samples can be accurately classified according to their original locations. This research serves as a prerequisite for future studies involving the combination of elemental composition analysis with statistical classification methods for the accurate establishment of cashew nut provenance, which involves the identification of key markers for the original discrimination of cashew nuts. [ABSTRACT FROM AUTHOR]

Cadmium (Cd) is one the most toxic metals harmful for both animals and plants. In this study, we test whether silver nanoparticles (AgNPs) can protect plants from cadmium toxicity. AgNPs treatments (0 and 100 μg/L) were applied to Datura stramonium calli grown in different cadmium metal environments (0, 150, 300, 450, and 600 μM). Cd application led to a decrease in fresh weight (FW), dry weight (DW), relative water content (RWC), total chlorophyll content (Chl.T), tolerance index (Ti), and bioaccumulation factor (BCF). The Cd treatment increased the hydrogen peroxide (H2O2), catalase (CAT), and guaiacol peroxidase (GPX) contents and Cd accumulation (Cd con). These results show the positive role of AgNPs in protecting the callus cultures from oxidative stress. The AgNPs pretreatment improved the growth of tissue cultures compared to nontreatment, increasing FW, DW, RWC, and Chl.T; the highest CAT and GPX activities were detected in the AgNPs pretreatment condition; and AgNPs pretreatment improved Ti and BCF, despite increased Cd. Also, this treatment caused a decrease in H2O2. Based on these results, we propose AgNPs as an effective agent to reduce the toxic effects of Cd metal on D. stramonium. [ABSTRACT FROM AUTHOR]

This paper addresses the analysis of hydrothermal carbonization of Tetra Pak residues using diluted sulfuric acid to obtain hydrochars for cleaning water polluted by heavy metal ions. The hydrochar samples were prepared under different carbonization conditions, and a detailed study of their composition, textural parameters, and surface functionalities was performed. It was found that the hydrothermal carbonization and dwell time of the Tetra Pak wastes significantly affected the composition of the hydrochars. These hydrochar samples contained oxygenated functional groups and aluminum-silicon moieties that were responsible for the Pb2+, Zn2+, and Hg2+ adsorption. The removal of these heavy metal ions using Tetra Pak hydrochars was an endothermic and multi-ionic process. Hydrothermal carbonization is a promising approach to improve Tetra Pak waste management, generating materials with interesting properties for addressing the problem of wastewater and industrial effluent depollution. [ABSTRACT FROM AUTHOR]

Medicinal plants represent an important class of traditional medicines. This research was conducted to assess the levels of selected heavy metals in some medicinal plants from Obuasi, a mining area in Ghana. Twenty different medicinal crops were sampled for this study. The levels of arsenic (As), cadmium (Cd), chromium (Cr), mercury (Hg), manganese (Mn), nickel (Ni), and lead (Pb) were determined by inductively coupled plasma mass spectroscopy (ICP-MS) after wet digestion. The concentrations (mg/kg) of As, Cd, Cr, Hg, Mn, Ni, and Pb were 1.092 − 0.206, 1.341 − 0.253, 6.603 − 2.005, 0.045 − 0.001, 282.798 − 20.583, 4.967 − 1.676, and 26.410 − 0.629, respectively. Some concentrations of Cr, Cd, As, Mn, and Pb analyzed in all 20 medicinal plant samples exceeded WHO permissible limits for medicinal food while concentrations of Ni, As, and Hg for all the samples were below the WHO permissible limit. The estimated dietary intake (EDI) was compared to the tolerable daily intake recommended by WHO/FAO. Results obtained from hazard indices such as the hazard quotient and carcinogenic risk show that the medicinal plants are not likely to cause cancer if they are consumed over a prolonged period of time. [ABSTRACT FROM AUTHOR]

The efficacy of different refining stages on physicochemical parameters, heavy metal, and mineral contents of sesame oil were investigated. The sesame oil from different refining stages (crude oil, neutralization, bleaching, deodorization, and refining stages) was taken from the local oil factory in Yazd, Iran. The fatty acid composition of oil samples was determined by GC-FID. The oxidation indexes including peroxide value, p-Anisidine, free fatty acid, TOTOX, total polar material, as well as antioxidant activity (FRAP and DPPH), and total phenolic content were measured. The mineral and heavy metal content of oil samples were analyzed by ICP-OES. Linoleic acid (41.1-42.4%), oleic acid (41-41.4%), palmitic acid (8.3-9.1%), and stearic acid (6.1-6.3%) were reported as the most dominant fatty acids in all oil samples. The results illustrated that the refining process had no significant effects on fatty acid composition except for slight changes in palmitic acid. It was shown that all oxidation indexes, antioxidant activity, total phenolic content and mineral, and heavy metals were decreased during oil refining. The highest decrease in oxidative indexes was reported in the deodorization stage. The total phenolic content, DPPH, and FRAP ranged from 4.79 to 56.56 mg GAE/100 g, 6852.64 to 867.89 mg/ml, and 54.74 to 127.4 mM FeSO4.7H2O in RSO and CSO, respectively, which the highest decrease was shown during the neutralizing stage. The order of metals in RSO was shown as P>Ca>K>Fe>Mg>Al>Cr>Pb>Ni>Cd>Cu>Co. Although all metals were decreased by the refining process, the Pb concentration (0.16 mg/kg) of RSO was evaluated as higher than the permissible limit. Considering that the refining process effectively reduces undesirable compounds, the consumption of crude sesame oil is not recommended. [ABSTRACT FROM AUTHOR]

Biodegradable and eco-friendly composite adsorbent was synthesized from modified jute fiber and gelatin and evaluated its efficacy in removing cadmium (Cd2+), lead (Pb2+), and chromium (Cr3+) ions from an aqueous solution. The prepared sample was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray analyses, which revealed that gelatin successfully intercalated into the microcrystalline cellulose matrix. In batch adsorption studies, the effects of pH, adsorbent dosage, initial metal ions concentration, and temperature on the removal of heavy metal ions were investigated. The adsorption capacity of the composite varied with changing parameters, and the maximum removal efficiency obtained for Cd2+, Pb2+, and Cr3+ was 95%, 88%, and 70%, respectively, at pH 6 with 60 ppm of each metal ions concentration and an adsorbent dosage of 1.0 g L−1. Different functional groups in composite adsorbent facilitated heavy metal ions adsorption. Five error analysis methods were used to evaluate the fit the goodness of the data. The equilibrium adsorption and kinetic data were well-fitted with the Langmuir isotherm model and pseudo-second-order, respectively. Moreover, the thermodynamic study showed that the adsorption was spontaneous, chemisorption, and endothermic. Our work offers a sustainable and biodegradable composite synthesized from modified jute fiber and gelatin for multimetal ions removal from an aqueous, which is an eco-friendly alternative to conventional nonbiodegradable adsorbents with potential environmental risks. [ABSTRACT FROM AUTHOR]

In this study, polymeric nanocomposites of zeolitic imidazolate frameworks (ZIFs) were synthesized by assembly of a biomimetic polymer-polydopamine (PDA)onto halloysite nanotubes (HNTs@PDA), followed by the in situ growth of zeolitic imidazolate framework-8 (ZIF-8) on the surface of HNTs@PDA. The obtained nanocomposites (HNTs@PDA/ZIF-8) prevented agglomeration of ZIFs and increased the number of active sites derived from PDA. The factors influencing heavy metal ions (Pb2+, Cd2+, Cu2+, and Ni2+) adsorption by HNTs@PDA/ZIF-8 were discussed. The Langmuir model was able to well describe the adsorption, and the maximum adsorption capacity of HNTs@PDA/ZIF-8 was calculated to be 285.00 mg/g for Cu2+, 515.00 mg/g for Pb2+, 185 mg/g for Cd2+ and 112.5 mg/g for Ni2+. Thermodynamic parameters confirmed that the adsorption was exothermic and spontaneous. Moreover, HNTs@PDA/ZIF-8 has good regenerability, which is very important in practical applications. The adsorption mechanism study showed that electrostatic attraction, coordination reactions and ion-exchange were the main mechanisms between the adsorbents and heavy metal ions. Hence, HNTs@PDA/ZIF-8 is a promising candidate for removing heavy metal ions from wastewater. [ABSTRACT FROM AUTHOR]

Hazardous heavy metal ions such as copper, zinc, nickel, chromium, cadmium, and lead engender a potential risk to human health. Among the processes involved in the retention of these contaminants, adsorption is advantageous for removing toxic metals because of its environmentally friendly aspect, efficiency, and low-cost operation. Information on the adsorption of heavy metals in soils from the semiarid region of northeastern Brazil is still scarce. In this study, the adsorption of heavy metals (Cd, Cu, Zn, Ni, and Pb) by a semiarid Brazilian bentonitic soil is investigated. This soil has been used as a bottom liner in an experimental municipal solid waste (MSW) cell located in Campina Grande, State of Paraíba, Brazil. The experimental cell consists of a landfill unit on an experimental scale, with the same constructive elements of a sanitary landfill. Disturbed and undisturbed samples of the investigated soil were collected at a quarry in the rural zone of Boa Vista (state of Paraiba, Northeast Brazil). Sorption attributes were determined via batch tests with a soil-solution ratio of 1 : 12.5 (4 g of dry soil to 50 mL of solution). Linear, Freundlich, and Langmuir isotherms were fitted to the experimental data, using as fitting parameters Pearson correlation coefficient ( R 2 ) and p value with a significance level α = 5 %. The ascending order of maximum adsorption capacity for heavy metals followed the series Ni < Cr < Zn < Cd < Cu < Pb. The maximum adsorbent capacities obtained were similar to those of other Brazilian soils and other adsorbents. Therefore, the studied soil has a high potential to be used in the retention of heavy metals. [ABSTRACT FROM AUTHOR]

Drinking water quality is fundamental to human physiology and health. The aim of this study was to assess the quality of drinking water in Gazer Town and selected kebele, in south Ari district, South Omo zone, Southern Ethiopia. A total of four drinking water samples were collected from densely populated urban areas of the Gazer Town and one rural Kebele. All the collected samples were analyzed for eight heavy metals, (Cd, Co, Cu, Cr, Fe, Mn, Pb, and Zn) using standard procedures. The results were compared with other national and international standards. Among the analyzed samples, drinking water samples collected from selected kebele (Aynalem kebele), show mean concentrations heavy metals in (μg/L), (Mn (973 ± 10), Cu (1068 ± 1.5), Cr (2785 ± 25), Fe (4302 ± 15), Cd (1218 ± 18), Pb (720 ± 12), Co (1478 ± 3), and Zn (1790 ± 5)), and the results revel except, Co and Zn metals, all show concentrations higher than the national and international standards (such as USEPA (2008), WHO (2011), and New Zealand) recommended values. Among the eight heavy metals analyzed from drinking waters in Gazer Town, Cd and Cr were below the method detection than that of all sampling area. However, the concentration of Mn, Pb, Co, Cu, Fe, and Zn were ranged from mean values of 9 μg/L, 17.6 μg/L, 7.6 μg/L, 12 μg/L, 765 μg/L, and 494 μg/L, respectively. Except Pb metals, the analyzed metals in waters were below the currently recommended guidelines for drinking. Therefore, the government should adopt some treatment technologies such as sedimentation and aeration to minimize the concentration of zinc for safe drinking the water to the community of Gazer Town. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) have emerged as a viable method for bioremediation of toxic metals while also producing energy. In this paper, we examine the issue of organic substrate as a source of metabolism for microbe growth in MFC, as well as its significance for metal ion degradation in tandem with energy production. This study focused on the use of commercial sugar as an organic substrate in a single-chamber MFC. The MFC was operated for 27 days, with the highest voltage of 150 mV achieved on day 12, and toxic metal bioremediation efficiencies of 89%, 76.45%, and 89.45% for Pb2+, Cd2+, and Hg2+, respectively. Every 24 hours, the organic substrate (sugar solution) was fed into the cell. This study's mechanism of metal ion degradation and electron transport is also thoroughly described. In addition, some future views have been highlighted. [ABSTRACT FROM AUTHOR]

Background. Peri-implant diseases are emerging issues in contemporary implant dentistry. As biofilms play a critical role in peri-implant diseases, the characteristic of resisting bacterial adhesion would be ideal for dental implants. The aims of the study were to compare titanium (Ti) and zirconia (Zr) implants regarding the amount of biofilm formation at different time frames and assess the distribution of biofilm on different aspects of dental implants. Methods. Biofilm was developed on Ti and Zr dental implants with a peri-implant-related multispecies model with Streptococcus oralis, Actinomyces naeslundii, Veillonella dispar, and Porphyromonas gingivalis, for 3 and 14 days. Quantitative assessment was performed with the measurement of total bacterial viability (colony forming units, CFU/mg). Scanning electron microscopy (SEM) was used to evaluate biofilm formation on different aspects of the implants. Results. Three-day-old biofilm on Ti implants was significantly higher than that on Zr implants (p < 0.001). The Ti and Zr groups were not significantly different for 14-day-old biofilm. SEM images demonstrated that 3-day-old biofilm on Zr implants was sparse while biofilm growth was more pronounced for 3-day-old biofilm on Ti implants and 14-day-old biofilm groups. It appeared that less biofilm formed on the valley compared to the thread top for 3-day-old biofilm on Zr implants. Differences between the valley and the thread top became indistinguishable with the development of mature biofilm. Conclusion. While early formed biofilms show greater accumulation on Ti implants compared to Zr implants, older biofilms between the two groups are comparable. The distribution of biofilms was not uniform on different areas of implant threads during early biofilm development. [ABSTRACT FROM AUTHOR]

The direct ingestion of indoor dust particles at historical heritage sites is a primary exposure pathway for employees to heavy metals. Water-soluble ions (WSIs) and heavy metal levels, sources, bioaccessibility, and health risks associated with indoor dust in the Mogao Grottoes were analyzed using comprehensive methods to determine the differences in the concentrations and distribution characteristics of WSIs and heavy metals between statue dust and floor dust. The concentrations of WSIs and heavy metals and the magnetic values of χ lf and SIRM in indoor dust were higher than those in street dust and topsoil. The mean χ lf and SIRM of statue dust particles were 100.3 × 10 − 8 m 3 k g − 1 and 1686.9 × 1 0 − 5 Am 2 k g − 1 . Specifically, the concentration of Pb was 277 mg k g − 1 , 15-fold higher than the background value, indicating the continual receipt of heavy metals with high magnetic minerals during dust deposition. WSIs mainly originate from the weathering of surrounding rocks and earthen plaster; Pb originates from the shedding of paint of murals and sculptures; and Zn, Cu, and magnetic minerals originate from traffic sources. The bioaccessibility of heavy metals is high in the gastrointestinal phases of indoor dust. Overall, the health risks posed by heavy metals in indoor dust were low, with moderate to high risks in individual caves. Ingestion presents the highest noncarcinogenic and carcinogenic risk to employees. These results provide essential knowledge on indoor dust characteristics in the Mogao Grottoes, facilitating strategies for dust pollution mitigation and employee health risk control. [ABSTRACT FROM AUTHOR]

The isolation of nanocellulose has been extensively investigated due to the growing demand for sustainable green materials. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs), which have the same chemical composition but have different morphology, particle size, crystallinity, and other properties depending on the precursor and the synthesis method used. In comparison, CNC particles have a short rod-like shape and have smaller particle dimensions when compared to CNF particles in the form of fibers. CNC synthesis was carried out chemically (hydrolysis method), and CNF synthesis was carried out mechanically (homogenization, ball milling, and grinding), and both can be modified because they have a large surface area and are rich in hydroxyl groups. Modifications were made to increase the adsorption ability of heavy metal ions. The Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric (TG), and dynamic light scattering (DLS) can reveal the characteristics and morphology of CNCs and CNFs. The success and effectiveness of the heavy metal adsorption process are influenced by a few factors. These factors include adsorbent chemical structure changes, adsorbent surface area, the availability of active sites on the adsorbent's surface, adsorption constants, heavy metal ionic size differences, pH, temperature, adsorbent dosage, and contact time during the adsorption process. In this review, we will discuss the characteristics of CNCs and CNFs synthesized from various precursors and methods, the modification methods, and the application of CNCs and CNFs as heavy metal ion adsorbents, which includes suitable isotherm and kinetics models and the effect of pH on the selectivity of various types of heavy metal ions. [ABSTRACT FROM AUTHOR]

In this article, a modified BCR procedure and a column leaching test were used to examine the bioavailability and mobility of heavy metals in soils collected from a gold mining area in Ghana. The results for the fractionation of Cd, Cr, Fe, and Mn indicated that high percentages of metals were found in the residual fraction. This implies that the concentrations of metals in the soil are stable under normal environmental conditions. The bioavailability of metals in the soils declined in the following order: Mn (92.4%) > Cd (64.6%) > Cr (46.4%) > Fe (39%). However, the concentrations of labile metals may pose no risk to the environment. In the column test, different rainwater conditions (i.e., natural rainwater and acidified rainwater) were used to imitate the leaching potential of the metals in the actual field. The pH of the soil primarily controlled metal migration into deeper layers. Cumulative metal concentrations in the leachates showed that Fe, Mn, and Cd were high in the tested soils but present at low concentrations, except for Cd. Cadmium showed a higher concentration than the WHO guideline for drinking water, and its seepage into deeper layers may affect the quality of groundwater. [ABSTRACT FROM AUTHOR]

This study's goal was to learn more about how agrowaste plants tolerate, absorb, and accumulate a number of metals that are of relevance to the environment. Adsorption of lead (Pb), chromium (Cr), selenium (Se), copper (Cu), and zinc (Zn) ions from synthetic aqueous solutions and wastewater using natural waste residues (NWRs) such as moringa, Lupinus, sugarcane straw, and tea residue was evaluated. The adsorbents used for this study were prepared by washing, drying, and grinding. Fourier-transform infrared (FT-IR) spectroscopy and scanning electron microscope (SEM) analysis were used to characterize the adsorbents' waste residues. The effect of different parameters such as pH, dose of adsorbents, and the initial concentration of heavy metals, as well as the adsorption isotherm parameters were studied. Moringa, Lupinus, sugarcane straw, or tea residue results were found to fit the Langmuir and Freundlich adsorption isotherms. The adsorption capacity reached 14.59, 16.10, 12.73, and 15.01 mg/g, respectively. The adsorption study's overall results indicated the removal efficiency pattern as moringa > tea > Lupinus > sugarcane straw. At a dose of 0.5 g/L, the maximum removal percentages for lead, chromium, selenium, copper, and zinc ions were 90.2, 76.55, 70.55, 76.6, and 78.9, respectively. The materials might be regarded as efficient adsorbents for extracting the ions Pb, Cr, Se, Cu, and Zn from wastewater, according to the research. [ABSTRACT FROM AUTHOR]

The relationship between heavy metal contamination in sediment and macrofauna in the upper Gulf of Thailand is presented as an indication of the environmental quality of coastal waters. This study aims to monitor five heavy metal elements (As, Cd, Mn, Ni, and Pb) between sediment and the sandworm (Perinereis quatrefagesi (P. quatrefagesi)). The geoaccumulation index (Igeo), enrichment factor (EF), and contamination factor (CF), including the pollution load index (PLI), were used for statistical analyses by one-way analysis of variance (ANOVA), and differences in the data were compared using the least significant difference (LSD) test. The sediment heavy metal concentrations were found to decrease (Al > Mn > Pb > Ni > Cd > As), and the quantity of heavy metal contamination in the sediment was not over the emergency point defined by the Pollution Control Department in Thailand. The Mn at the SH and SP points has Igeo > 0 but <1 and is considered not polluted to moderately polluted. The EF overall is <2 and is deficient in mineral enrichment. The CF of the Samut Sakhon (SH) and Samut Prakan (SP) sites had high Al and Mn values, indicating a low pollution level, but the PLI had an all-site average of 0.0215 ± 0.0252, which is <1. This indicates that the present areas are close to ideal and not polluted. To measure heavy metals in macrofauna, P. quatrefagesi was assessed, and concentrations were found to decrease (Mn > Ni > Cd > Pb > As). The Mn between sediment and the sandworm was directly correlated (r = 0.976; p < 0.01). The sandworm performs as a bioindicator for the quality of coastal sediment, specifically with Mn; thus, the result present at a baseline level may grow in the future if there is no control measure for defensive measures. [ABSTRACT FROM AUTHOR]

The presence of heavy metals in wastewater, such as Ni, Pb, Cd, V, Cr, and Cu, is a serious environmental problem. This kind of inorganic pollutant is not biodegradable for several years, and its harmful effect is cumulative. Recently, semiconductor nanomaterials based on metal oxides have gained interest due to their efficiency in the removal of heavy metals from contaminated water, by inducing photocatalytic ion reduction when they absorb light of the appropriate wavelength. The most commonly applied semiconductor oxides for these purposes are titanium oxide (TiO2), zinc oxide (ZnO), and binary nanomaterials composed of both types of oxides. The main purpose of this work is to critically analyse the existent literature concerning this topic focusing specially in the most important factors affecting the adsorption or photocatalytic capacities of this type of nanomaterials. In particular, photocatalytic activity is altered by various factors, such as proportion of polymorphs, synthesis method, surface area, concentration of defects and particle size, among others. After a survey of the actual literature, it was found that, although these metal oxides have low absorption capacity for visible light, it is possible to obtain an acceptable heavy metal reduction performance by sensitization with dyes, doping with metallic or nonmetallic atoms, introduction of defects, or the coupling of two or more semiconductors. [ABSTRACT FROM AUTHOR]

This study evaluates the applicability of dry faecal sludge activated carbon (DFSAC) as a wastewater pollutant removal technology by employing both laboratory- and large-scale setups. The setups were monitored using effluent from the Mudor wastewater treatment plant in Accra. The DFSAC was produced from primary sludge obtained from a primary treatment to treat approximately 1000 liters of effluent water per hour to meet the needs of backwashing, cleaning, irrigation, and flushing purposes. The laboratory-scale experiment was monitored for a period of two weeks, while the large-scale experiment was monitored for a period of 16 weeks. Physicochemical, microbial, and metal characteristics were analyzed for the polished effluent. The results obtained from the lab scale showed high removal efficiencies of the wastewater pollutants for the first and second weeks of treatments, respectively, as follows: colour (99.47%, 69.06%), turbidity (99.59%, 42.59%), COD (96.58%, 43.49%), BOD (99.26%, 77.42%), TSS (100%, 62.296%), TDS (92.92, 32.90), ammonia (98.41%, 50.83%), and EC (73.60%, 19.94%). The P value obtained indicated a highly significant difference between the influent and effluents of both weeks. The large-scale application of the DFSAC yielded a percentage reduction of 99.36%, 99.37%, 99.52%, 79.63%, 100%, 48.85%, 90.08%, and 46.72% for colour, turbidity, COD, BOD, TSS, TDS, ammonia, and EC, respectively. The DFSAC showed high removal potential for heavy metals and microbial contaminants over the study period. Pollutant removal in wastewater with DFSAC proved a promising intervention by significantly reducing pollutants in wastewater effluent as a tertiary treatment. The removal efficiencies are indications that physisorption and chemisorption play an important role in the adsorption of pollutants onto the DFSAC. The study has shown that faecal sludge can be used as activated carbon for remediation of wastewater pollutants, especially in treatment facilities, which do not meet EPA effluent discharge guidelines while ensuring a close resource utilization loop. [ABSTRACT FROM AUTHOR]

Through the electrodeposition technique, toxic metals in wastewater can be removed and deposited on a chosen substrate with excellent selectivity. In this work, we use this technique to extract lead cations from simulated wastewater by using fluorine-doped tin oxide (FTO) substrate at various temperatures. In situ tracking of lead nucleation at advanced stages has been achieved by chronoamperometry. According to the experimental results, the theoretical models developed to study the kinetic growth of lead deposits in 2D and 3D are in good agreement. Nucleation rate and growth rate constants, for example, were found to be strongly influenced by temperature. Cottrell's equation is used to calculate the diffusion coefficient. X-ray diffraction, scanning electron microscopy, and energy-dispersiveX-ray techniques were used to investigate and characterize the lead deposits. The reported results could provide insight into the optimization of electrodeposition processes for heavy metal recovery from wastewater and electronic wastes. [ABSTRACT FROM AUTHOR]

Analysis of trace elements and heavy metals in honey is essential for honey quality and safety and also monitoring environmental pollution. This study aimed to evaluate the composition of thirty-seven honey samples of different botanical origins (14 multifloral and 23 unifloral) obtained from beekeepers located in the west region of Algeria. Inductively coupled plasma-mass spectrometry (ICP-MS) and atomic absorption spectroscopy (AAS) methods were used to determine the levels of 19 elements in honey (K, Na, Ca, Mg, Mn, Cu, Fe, Zn, V, Cr, Co, As, Ru, Rh, Cd, W, Pt, Au, and Pb). Ru, Rh, Pt and, Au were not detected in any of the tested honey samples. The most abundant minerals were K, Ca, Na, and Mg ranging within 153.00–989.00 mg/kg, 33.10–502.00 mg/kg, 13.30–281.00 mg/kg, and 20.80–162.00 mg/kg, respectively. Fe, Mn, Zn, and Cu were the most abundant heavy metals while Pb, V, Cr, W, Co, and Cd were the lowest ones (<1 mg/kg) in the honey samples surveyed. Several honey types, lavender, rosemary, mild white mustard, thyme, milk thistle, carob tree, orange tree, Euphorbia, Eucalyptus, camphor, jujube tree, sage, and harmal, were studied, and the statistical analysis was carried out using principal component analysis (PCA) and hierarchical cluster analysis (HCA) techniques to evaluate the data. The results showed that the analyses of mineral content were sufficient to determine the floral origin and their variability may be related to geochemical and geographical differences. On other hand, all elements detected were at levels below safe thresholds. [ABSTRACT FROM AUTHOR]

The current study is concerned with the primary environmental assessment of the physicochemical characterization of seasonal fluctuations in the leachate of Tanjaro open dump site in Sulaymaniyah City, and its impact on the quality of the groundwater. The primary characteristics of the leachates were their high levels of organic and inorganic components and their toxicity because of the presence of heavy metal concentrations. For almost all physicochemical parameters, the leachate from the Tanjaro area dumping has incredibly high values. All heavy metals were present in leachate, with the exception of cadmium and mercury, albeit at levels below their respective permitted limits. The characterization revealed that Leachate 1 (L1) may be referred to as young leachate, whereas Leachate 2 (L2) and Leachate 3 (L3) can be referred to as old leachate due to their pH values. It was indicated that the Tanjaro dumping is operating and in the early stages of stabilization. BOD5/COD was around 0.63, and the leachate was highly biodegradable in the anaerobic phase. Groundwater, which contains little to no organic matter, was not found to be severely affected by monitoring wells located close to the dumpsites. The conductivity, total dissolved solids, total hardness, Mn, and Fe were some of the values that went above the WHO guidelines. Correlation analysis was used as a preliminary descriptive technique to establish the strength of the association between the relevant variables. Some parameters were discovered to be statistically significantly correlated with one another, pointing to a close connection between these parameters. [ABSTRACT FROM AUTHOR]

Globally, the issue of microbial resistance to medicines and heavy metals is getting worse. There are few reports or data available for Proteus vulgaris (P. vulgaris), particularly in India. This investigation intends to reveal the bacteria's ability to transmit genes and their level of resistance as well. The wastewater samples were taken from several hospitals in Lucknow City, India, and examined for the presence of Gram-negative bacteria that were resistant to antibiotics and heavy metals. The microbial population count in different hospital wastewaters decreases with increasing concentrations of metal and antibiotics. Among all the examined metals, Ni and Zn had the highest viable counts, whereas Hg, Cd, and Co had the lowest viable counts. Penicillin, ampicillin, and amoxicillin, among the antibiotics, demonstrated higher viable counts, whereas tetracycline and erythromycin exhibited lower viable counts. The MIC values for the P. vulgaris isolates tested ranged from 50 to 16,00 μg/ml for each metal tested. The multiple metal resistance (MMR) index, which ranged from 0.04 to 0.50, showed diverse heavy metal resistance patterns in all P. vulgaris isolates (in the case of 2–7 metals in various combinations). All of the tested isolates had methicillin resistance, whereas the least number of isolates had ofloxacin, gentamycin, or neomycin resistance. The P. vulgaris isolates displayed multidrug resistance patterns (2–12 drugs) in various antibiotic combinations. The MAR indexes were shown to be between (0.02–0.7). From the total isolates, 98%, 84%, and 80% had urease, gelatinase, and amylase activity, whereas 68% and 56% displayed protease and beta-lactamase activity. Plasmids were present in all the selected resistant isolates and varied in size from 42.5 to 57.0 kb and molecular weight from 27.2 to 37.0 MD. The transmission of the antibiotic/metal resistance genes was evaluated between a total of 7 pairs of isolates. A higher transfer frequency (4.4 × 10−1) was observed among antibiotics, although a lower transfer frequency (1.0 × 10−2) was observed against metals in both the media from the entire site tested. According to exponential decay, the population of hospital wastewater declined in the following order across all sites: Site II > Site IV > Site III > Site I for antibiotics and site IV > site II > site I >site III for metal. Different metal and antibiotic concentrations have varying effects on the population. The metal-tolerant P. vulgaris from hospital wastewater was studied in the current study had multiple distinct patterns of antibiotic resistance. It could provide cutting-edge methods for treating infectious diseases, which are essential for managing and assessing the risks associated with hospital wastewater, especially in the case of P. vulgaris. [ABSTRACT FROM AUTHOR]

Background. Environmental contamination by heavy metals has become a worldwide problem in recent years because of industrial and agricultural development which causes cereal crop contamination via their wastes. The presence of toxic heavy metals in cereal crops accumulate in the body for a prolonged period of time which poses acute and chronic health risks. The aim of the study was to assess the level of heavy metals in selected cereals sold at Debre Markos local market, in Ethiopia. Methods. The samples were prepared for analysis by using the dry ashing method, and their cadmium, lead, chromium, and copper contents were analyzed by using microwave-induced plasma-atomic emission spectroscopy (MP-AES) and were expressed in mgkg−1 dry weight. The accuracy of the method was analyzed by the spike recovery test. Results. The percentage recovery for Cr, Cu, Pb, and Cd in each sample ranged from 85.6 to 112.8%. The levels of heavy metals (mean ± SD) were as follows: chromium, 2.20 ± 0.072, 2.22 ± 0.061, 1.57 ± 0.48, and 1.84 ± 0.26; copper, 2.94 ± 0.19, 2.31 ± 0.06, 1.28 ± 0.13, 1.52 ± 0.035, and 2.31 ± 0.06; lead, 0.49 ± 0.031, 0.34 ± 0.121, 0.52 ± 0.029, and 0.37 ± 0.15; and cadmium, 2.01 ± 1.73, 1.84 ± 1.60, 1.95 ± 1.69, and 1.93 ± 1.67 for barley, teff, wheat, and maize, respectively. This study revealed that the levels of Cr and Cu are generally below the permissible limit. However, the levels of Pb and Cd in all cereal samples were found to be above the permissible limit set by FAO/WHO, 0.2 and 0.1 mg kg−1, respectively. Conclusion. The findings of the study suggest that most of the analyzed crops contained unsafe levels of lead and cadmium that exceeded the WHO permissible limits. Therefore, regular monitoring of these toxic metals in cereal crops should be carried out to prevent heavy metal toxicity associated with the consumption of some cereal crops marketed in the Debre Markos local market, Ethiopia. [ABSTRACT FROM AUTHOR]

Obesity is an increasing problem that can lead to noncommunicable diseases. The role of dietary factors on one's obesity is confirmed in many studies. One nutritional approach that can be used for assessment of the foods and diets is the Index of Nutritional Quality (INQ). Our study is aimed at exploring the association between INQ and obesity. Our hypothesis is that enriched and high-quality diets reduce the risk of overweight or obesity. This study was carried out on 6248 overweight and obese participants, from whom 4356 (69.7%) and 1892 (30.3%) were overweight and obese, respectively. To assess the dietary intake for the participants, a valid food frequency questionnaire (FFQ) with 130 food items was utilized. The analysis revealed an inverse association between the overweight and the INQ of iron, thiamin, riboflavin, B6, folate, zinc, magnesium, calcium, and vitamin C and E. For the obese group, this inverse association was found for iron, B6, folate, zinc, magnesium, calcium, and vitamin C and E. These results approved our hypothesis that a rich nutrition diet may lead to a lower risk of obesity. [ABSTRACT FROM AUTHOR]

The present study aimed to assess the effects of raw (RGNH), ethanol-extracted (EEGNH), and acid-treated (ATGNH) groundnut (Arachis hypogaea L.) husk for removal of chromium from tannery effluent from the Mojo tannery industry, Ethiopia. The effects of biosorbent dose, agitation speed, and contact time of heavy metal on biosorbent were measured. The percentage removal of chromium was examined by a flame atomic absorption spectrophotometer (FAAS). Functional group characteristics of the biosorbents were analyzed using Fourier transform infrared spectra (FTIR). The results indicated that at low doses (2 g), acid-treated groundnut husk (ATGNH) exhibited the highest removal efficiency (89.93%), whereas at a high dose (4 g), the raw groundnut husk (RGNH) has a potential removal efficiency (91.03%). The least removal efficiency was displayed by ethanol-extracted groundnut husk (EEGNH) (65.43%) at a dose of 3 g. Relating to the contact time, the highest chromium removal (94.41%) was exhibited by ATGNH with a 1-hour contact time. However, as contact time increased from 2 to 4 hours, there was a general decrease in the efficiency of biosorption. The removal of chromium by RGNH and EEGNH increased as contact time increased from 1 to 3 hours. The highest chromium removal (90.02%) was observed with ATGNH at 160 rpm agitation speed. [ABSTRACT FROM AUTHOR]

The release of harmful particles from industries is one of the important sources of environmental pollution worldwide. The goal of this study was to determine the amounts of dust deposition and heavy metal pollution in the soils surrounding a cement mill in Konongo, Ghana. Topsoils (0-10 cm) were sampled at the four geographical axes of the factory within a radius of 400 m, while at the same time, about 500 g of cement was sampled with a hand trowel. A Frisbee dust sampler was used to examine the levels of dust depositions at the various geographical axes of the factory. The heavy metals such as cadmium (Cd), chromium (Cr), copper (Cu), zinc (Zn), and lead (Pb) were measured in a total of 20 soil samples using atomic absorption spectroscopy (AAS). The results obtained for climatic elements such as wind speed and direction, temperature, and relative humidity were 2.25, 25.7, and 49.5 m3/s, respectively. The average deposition of dust within the study period using the geographical axis indicated that the southern axis recorded the highest dust accumulation with a mean of 60.2 g/m2 per month. The mean concentrations of metals at the various axes were 1.04 mg/kg, 4.78 mg/kg, 8.95 mg/kg, 9.30 mg/kg, and 18.4 mg/kg for Cd, Cr, Cu, Zn, and Pb, respectively. The concentration of chemical components investigated in the soil was below the WHO/FAO standard, except for Cd. The spatial distribution pattern of the examined heavy metals showed that Cd, Cr, and Cu represent possible sources of soil contaminants. According to the conclusions of this research, this paper suggests an approach to investigate the areas contaminated with heavy metals to call out the attention of local authorities to take action. [ABSTRACT FROM AUTHOR]

Heavy metal (HM)-induced toxicity and its associated complications have become a major issue in the medical world. HMs are not biodegradable, enter into the food chain, and gets accumulated in the living systems. Increased concentrations and accumulation of HMs can cause severely damaging effects and severe complications in living organisms and can even lead to the death of the organism. In Ayurvedic medicine, ingredients of natural origin, including whole plants or certain portions of the plant, animal sources, and minerals, are used for therapeutic purposes as medicine, both alone and in combination. HM such as cadmium, copper, zinc, lead, chromium, nickel, and arsenic cause hazardous effects on animals, human health, and the environment. This review focuses on mutagenic, carcinogenic, and teratogenic effects of HM , mechanism, organ toxicity, available remedies in the market, and their side effects. Also, emphasis is given to alternative systems of medicine to treat HM toxicity. [ABSTRACT FROM AUTHOR]

In this study, physicochemical characteristics, mineral and polyphenolic composition, and anti‐inflammatory and antimicrobial effects of wild cornelian cherry fruits from two regions of Bosnia and Herzegovina were determined. Values of flesh weight and fruit:flesh ratio were higher for samples from the western region. Samples from the southern region had significantly higher (p ≤.05) dry matter, total sugar and pectin content, as well as color parameters L* and a*, whereas samples from the western region had significantly higher (p ≤.05) total acidity. Significant content of potassium, calcium, magnesium, and phosphorus were determined in all samples. A higher content of flavonols was found in the samples of cornelian cherries from the southern region, whereas a higher content of flavan‐3‐ols and anthocyanins was found in the samples from the western region. All cornelian cherry fruit samples showed anti‐inflammatory and antimicrobial activity. Polyphenolic components had significant (p ≤.05) antimicrobial activity against Bacillus cereus and Escherichia coli cultures. Novelty impact statement: The wild cornelian cherries are widespread in the territories of Bosnia and Herzegovina, but so far, it has not been fully explored, and the results presented in this paper provide new findings. The ethanolic extract of all tested cornelian cherry samples had a significant amount of essential macrominerals, whereas heavy metal cadmium was not found and lead was found only in traces. All ethanolic extracts exhibited high antimicrobial and anti‐inflammatory activity, and the content of flavonols, flavan‐3‐ols, and anthocyanins was found to depend on the growth region. [ABSTRACT FROM AUTHOR]

The study analyzes the survey data on the surface sediments in 355 stations in Xiamen Sea area during 2004-2006, 2007-2009, 2010-2013, and 2014-2016. The result finds that contents of TOC, sulfide, and oils in the surface sediments were generally low but showed significant spatial differences (p < 0.05) in most cases, with TOC in the West Sea area (WS) staying significantly higher than other sea areas. Xiamen Sea area suffered universal heavy metal pollution mainly from Cu and Zn for years in the WS, the Jiulong River Estuary (JE), and the East Sea area (ES), and the heavy metal pollution index (HPI) exhibited significant spatial differences across the four periods (p < 0.05). With the source of heavy metals in the WS being mainly related to human activities, Cu and Zn were related to the development of port shipping and Pb to aquaculture. The heavy metal pollution in JE was mainly related to the input of rivers emptying into the sea. The high Cu content in the ES was related to the direct discharge of massive domestic sewage into the sea at the time. From 2004 to 2016, the potential ecological risks of heavy metals in Xiamen Sea area stayed low. [ABSTRACT FROM AUTHOR]

Environmental pollution is one of the main factors that significantly affect biological systems and human health. Soil pollution with heavy metals is an increasingly pressing problem worldwide. In general, heavy metals are stable and do not decompose, unlike other organic pollutants. The quantity of them is natural components of soil crust, the remaining come from human activities, which may result from the extensive use of sewage. In the present study, a methodology aimed at simultaneous quantification of 16 heavy elements in soil of 3 different regions was developed. The concentration of 16 soil heavy metals (Se, Cd, V, Be, As, Mn, Co, Zn, Fe, Cr, Pb, Ni, Cu, Mo, Hg, and Ti) was measured in 11 sampling along Riyadh, Qassim, and Medina, Kingdom of Saudi Arabia from 3 sites soil treated with sewage water. These chemical minerals were identified in the samples using an ICPE-9000 spectrometer. The assessment of heavy metal contamination was derived using enrichment factors (EF), the pollution load index (PLI), and geoaccumulation index (Igeo). This study revealed that the soil is predominantly polluted by Cd, As, and Mo of Riyadh and Medina and As, Mo, and Cd of Qassim region at site B and site C, respectively. As recorded, the highest concentration value of 5000 mg/kg for Fe at site (B) followed by Cu. The Igeo value of Cd is 1.1520 in Medina region. The Igeo value of Se is 3.2395 in Medina region, while its cumulative geographical index decreased in the regions of Riyadh and Qassim, which amounted to 2.6114 and 2.1699, respectively. The Igeo values of the rest of the minerals in the three regions studied indicated that the soil is unpolluted, while it was slightly to moderately polluted for both Mo and Hg in most regions studied. The minerals in the soil at all sites studied were less than the general average concentration. With the exception of mercury, molybdenum, arsenic, cadmium, and selenium, whose concentration exceeded the permissible and recommended limits. The increasing order of concentration of minerals was Be < V < Cd < Hg < Mo < Co < Zn < Pb < Cr < Se < As < Ni < Ti < Mn < Cu < Fe at all sites, respectively. [ABSTRACT FROM AUTHOR]

Due to climate change and anthropogenic activities such as agriculture, mining, and urbanization, water contamination has become a very real modern problem. Modern solutions such as activated carbon, reverse osmosis, and ultrafiltration, among others, have been employed in the decontamination of water. These methods are, however, expensive to set up and maintain and therefore have proved a challenge to implement in developing countries. Zeolite materials exhibit excellent structural properties, such as high ion exchange capacity, porosity, and relative surface area, which make them attractive to water decontamination processes. However, conventional zeolites are expensive, and recent research has focused on utilizing low-cost materials such as agro-wastes and clays as raw materials for the synthesis of zeolites. This review aims to discuss the role of low-cost zeolites in their removal of heavy metals and the feasibility of agro-wastes and natural clays in the synthesis of zeolites. Recent research studies based on the synthesis of zeolites from clays and agro-wastes and their application in heavy metal removal have been reviewed and discussed. Agro-wastes such as rice husk ash and sugarcane bagasse ash and layered silicate clays such as kaolinite and smectites are particularly of interest to zeolite synthesis due to their high silica to alumina ratio. Zeolites synthesized through various methods such as hydrothermal, molten salt, and microwave irradiation synthesis have been discussed with their effect on the adsorption of various heavy metals. [ABSTRACT FROM AUTHOR]

The current work focuses on peanut shells and agricultural wastes richly in many nations subjected to pyrolysis treatment at various temperatures in the range of 500–800°C to determine the feasible physiochemical characteristics of the biochar. The biochars with the high surface area were employed to adsorb Pb2+ (lead) ions, the heaviest pollutants in the water bodies. The raw material, biochar, and pyrolyzed biochar were characterized by SEM, FTIR, partial and elemental analysis, and BET tests. The adsorption characteristics of the biochar, pre- and postpyrolysis treatment, were studied with the assistance of batch adsorption tests under varying test conditions. Adsorbing conditions were determined by evaluating the effects of adsorbing parameters like initial concentration of the lead in water, pH of the adsorbent, contact time, and mixing speed on the effective adsorption of Pb2+ ions from water. Langmuir, Freundlich, and Themkin isotherm expressions were employed to study the experimental results. The adsorption kinetics study showed that the synthesized biochars were chemically stable enough to adsorb the Pb ions onto the surface. [ABSTRACT FROM AUTHOR]

Water pollution has been a major issue across the globe because of industrial activities to meet the needs of people. Many chemicals are released into the environment through these processes, which affect human health and the environment. Hence, the study aimed to assess the concentration of heavy metals (Cu, Zn, Mn, Ni, Hg, and Fe) and the physicochemical and biological properties of the Dankra River. The samples were taken from three locations, Konyaw, Jumako, and Anwiankwanta, and subjected to standard laboratory tests using Atomic Absorption Spectroscopy (AAS) and Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). Results revealed that the Dankran river was not polluted with the selected heavy metals under study. The physicochemical properties, the biological oxygen demand (BOD), chemical oxygen demand (COD), and nitrogen, phosphorus, and potassium (NPK) concentrations were all within the allowable healthy limits according to WHO standards. Iron was the predominant metal in the Dankran river, with the highest concentration of 6.5913 mg/l. Thus, the river is safe to use, but there is a need for regular monitoring to support life. The order of concentration of the investigated metals follows this pattern in descending order: Fe > Mn > Cu > Zn > Ni > Hg. [ABSTRACT FROM AUTHOR]

Purpose. To assess the surface roughness of two different light-cured resin-composites when opposed by monolithic zirconia after simulated mastication. Materials and Methods. Materials included a direct restorative nanohybrid (n = 10) and an indirect microhybrid (n = 10) resin-composite (Tetric EvoCeram and Sinfony, respectively). The antagonist material was 3 mol% yttria-stabilized tetragonal zirconia polycrystalline ceramic. Each material was subjected to in vitro chewing against zirconia using a chewing simulator for 250,000 cycles. A 3D profilometer was used to assess the surface roughness parameters of each resin-composite before and after the simulated chewing. Independent t -test and paired sample t -test were performed to compare roughness values for both materials and to compare baseline and after chewing simulation values (p = 0.05). Results. Sinfony showed significantly greater roughness values compared to Tetric EvoCeram (p ≤ 0.025) before and after simulated chewing, except for Sa and Sv parameters after simulated chewing where the difference between the two materials was insignificant (p = 0.06 and 0.89 , respectively). Surface roughness increased for both materials after simulated chewing compared to baseline values, but the difference was insignificant (p ≥ 0.065). However, S a (p = 0.04) and S v (p = 0.012) for Tetric EvoCeram were significantly higher after compared to before chewing simulation. Conclusion. Tetric EvoCeram had a smoother surface than Sinfony before and after simulated chewing. Surface roughness for both materials was higher after simulated chewing compared to baseline values which represent surface damage that was significant for Tetric EvoCeram while Sinfony showed better resistance. [ABSTRACT FROM AUTHOR]

This study aimed to determine the level of heavy metals in the Holeta and Golli rivers and their impacts on the community of Holeta town, Ethiopia. Water samples were collected from eight randomly selected locations (4 sites from each river). A questionnaire survey, FGD, and KII were also used. Secondary data were also taken from the nearby health center. The flame atomic absorption spectrometer was used to analyze the samples. Fe, Mn, Ni, Cr, Pb, Cu, Zn, Co, and Cd were the identified heavy metals. The Holeta River contains Fe > Mn > Zn > Ni > Cr > Cu > Pb > Co > Cd, whereas the Golli River contains Fe > Mn > Zn > Ni > Cr > Cu > Pb > Co > Cd. The levels of Fe, Cr, Ni, Fe, and Mn were above the permissible limit of WHO (1984) and USEPA (1992). The primary sources of income for the people who lived in the area were farming and jobs on flower farms. Wastewaters discharged from the surrounding flower farms were the major polluting source (84.3%) of the river. About 84.3% of the surrounding community claimed that wastewaters discharged from the flower farms are the major polluting sources of both rivers. Many of the flower farmworkers (43.9%) have also exposure to toxic insecticides and pesticides used on the farm. About 60% and 20.5% of the workers have frequent severe headaches and skin irritation due to exposure to heavy metals. Generally, both the surrounding community and flower farmworkers are facing significant health and socioeconomic impacts due to the heavy metals joining the rivers. Therefore, effective management of pollution sources and continuous monitoring of the river quality is very imperative to minimize the impacts. [ABSTRACT FROM AUTHOR]

Parecoxib sodium is a widely used parenteral cyclooxygenase 2 selective inhibitor to relieve acute postoperative pain following gynecologic laparotomy surgery. To ensure the quality of the drug, a detailed quality specification is indispensable. Nevertheless, it is unavoidable to introduce inorganic impurities during the drug preparation process and how to assess and control them matters. This study proposed an analytical procedure for the determination of elemental impurities (Cd, Pb, As, Hg, Co, V, Ni, Li, Sb, and Cu) in parecoxib sodium, where an easier and safer digestion protocol, graphite digestion, combined with an inductively coupled plasma-mass spectrometer (ICP-MS) was adopted when compared with microwave digestion. Moreover, the study also discussed whether should they be listed in specification to comply with ICH Q3D guidelines after test of process validation batches. Limit of quantitation (LOQ) of the above elemental impurities reached to 0.05, 0.125, 0.375, 0.075, 0.125, 0.25, 0.5, 6.25, 2.25 and 7.5 ppm, respectively, and recovery in accuracy item ranged from 90.2% to 129.9%, reflecting a sensitive and accurate method. [ABSTRACT FROM AUTHOR]

In this paper, hydrothermal treatment was used to treat river sediment. The physicochemical properties, chemical speciation, bioavailability, ecotoxicity, and leaching toxicity of heavy metals (Zn, Cu, Cr, Cd, Ni, Pb) in sediment under different hydrothermal treatment conditions were studied, and stabilization mechanisms of heavy metals were explained. The results showed that hydrothermal temperature and time had a huge impact on sediment reduction and heavy metal stabilization. The best reduction and stabilization of sediments were achieved at a hydrothermal temperature of 260°C and a hydrothermal period of 3 h. The hydrothermal treatment caused the sediment to undergo dehydration, dihydroxylation, decarboxylation, deamination, and aromatization with a gradual decrease in its H/C ratio, O/C ratio, and pH; a gradual increase in porosity and surface area; and a decrease in particle size. This facilitates the dehydration, reduction, and stabilization of the sediment. The bioavailable components of heavy metals in sediment were dramatically reduced following hydrothermal treatment, but the fraction of stable components rose significantly. This resulted in a marked decrease in the environmental bioavailability, ecotoxicity, and leaching toxicity of the heavy metals. Therefore, hydrothermal treatment might be an effective ex situ repairment way for reducing, stabilizing, and making river sediment harmless. [ABSTRACT FROM AUTHOR]

In order to investigate the effects of fertilization on soil chemical characteristics and ecological security, the chemical characteristics and ecological security risk analysis of heavy metal elements in a certain soil caused by fertilization were proposed. The contents of Ni, V, Cr, As, Cd, Pb, Zn, and Hg in 1,065 surface soil samples collected in a district of a city in the southwest agricultural area were tested and analyzed. Multivariate statistical analysis and spatial analysis were used to clarify the geochemical distribution characteristics of these heavy metals, and the possible main sources were also discussed. The results showed that the eight heavy metals could be divided into three categories. The first category included Ni, V, Cr, and As, whose content was lower than the background value in Beijing. And the distribution was mainly affected by natural factors such as parent materials of soil formation. The second category included Cd, Pb, and Zn, whose average content was higher than the background value. And the content was the highest in residential areas. In addition to the parent material inherited from the soil, the distribution characteristics of these elements were greatly affected by human activities. And Cd was significantly more affected by human activities than Pb and Zn. The third category included Hg, and it was inferred that atmospheric deposition was the main factor affecting the distribution of Hg. It was concluded that the Hakanson method was used to evaluate the ecological risk of heavy metals in soil, and the results showed that the potential ecological risk index was low in the area. [ABSTRACT FROM AUTHOR]

MgO@TiO2@g-C3N4 heteronanostructure was synthesized using a simple ultrasonication technique and assessed potentially to remove Cd (II) from aqueous environments. X-ray diffraction analysis confirms composite formation with mean crystallite size in the range of 4-17 nm while transmission electron microscopy analysis reveals nanosheet-like nanoparticles with the homogeneous elemental distribution. N2 adsorption-desorption measurements indicate the formation of a mesoporous structure with a BET surface area of about 107 m2/g. Fourier-transformed infrared elucidates the presence of O–H, amino groups, triazine, Mg–O, and Ti–O vibrations modes. At the same time, X-ray photoelectron spectroscopy analysis manifests the presence of Mg, O, N, Ti, and C elements. For aqueous Cd (II) ions, the MgO@TiO2@g-C3N4 nanostructure displays a superior adsorption efficiency, reaching 99.94% Cd (II) elimination with an optimum adsorption capacity of 515.86 mg/g in a short duration of 16 min. This study demonstrates the capability of using the MgO@TiO2@g-C3N4 nanostructure as an efficient and reusable adsorbent for the uptake of Cd (II) ions in wastewater treatment and potentially for the removal of other heavy metal ions. [ABSTRACT FROM AUTHOR]

Lanzhou is located in the northwest of China and is famous for its petrochemical and heavy industries of China. The city has suffered long-term pollution of heavy metals in recent years. Significant efforts, such as tax subsidies for new energy vehicles and treating solid waste, have been launched by the Lanzhou municipal government to address the pollution of heavy metals since 2010. What is the current status of heavy metal pollution in Lanzhou? In this study, the concentrations of 12 heavy metals (V, Cr, Mn, Co, Ni, Cu, Zn, As, Mo, Cd, Sb, and Pb) were tested from 20 sediment samples. Mn, Zn, V, and Cr are the predominant heavy metals, with mean concentrations of 534.65, 65.85, 56.29, and 36.05 mg/kg; Ni, Cu, Pb, Co, and As are in moderate amounts, with mean concentrations of 25.2, 21.5, 16.7, 9.87, and 4.86 mg/kg; Mo and Cd have the lowest mean concentrations of 0.54 and 0.15 mg/kg. A low ecological risk is confirmed by two indices, the Hakanson potential ecological risk index (R I) and the geoaccumulation index ( I geo ). The R I index has lower E i r values (<40) and R I values (<150), which range from 18.11 to 37.95, with an average value of 25.61. Co, V, Cd, Cu, Zn, As, Cr, Ni, Pb, and Mn metals are classified as an uncontaminated environment (level 0) and a moderately to heavily contaminated environment (level 2-level 3) by I geo values. Seven heavy metals (Pb, Cd, Cr, As, Cu, Zn, and Ni) in Lanzhou are the relatively lowest amount in the 5 cities in China. The changing trends of heavy metal concentrations firstly increase and then decrease gradually from 2005 to 2022. The time turning point of concentration shrinking occurred in approximately 2014, which is in response to the increased efforts of addressing the pollution launched by the Lanzhou municipal government since 2010. Source analysis by Pearson's correlation and principal component analysis revealed that the accumulation of Mo metal was caused by the enrichment of MnO2 in the oxidic condition; the accumulations of Cu, Co, Ni, Mn, Cr, Zn, Cd, and Pb metals are influenced by natural sources and human activities (vehicle exhaust and industrial pollution), respectively. [ABSTRACT FROM AUTHOR]