Search

Developing cost-effective and stable materials for the electrocatalysis of hydrogen evolution reaction (HER) remains challenging. In this study, efficient catalysts for HER were synthesized by integrating the cobalt and molybdenum oxides via electrodeposition, followed by subsequent sulfurization of the as-prepared oxides using chemical vapor deposition (CVD). This methodology allowed the incorporation of both cobalt and molybdenum components into the catalyst in a single step. The as-synthesized CoSx@MoSx/MoOx-based catalysts exhibited excellent hydrogen production performance in acidic media owing to the presence of Co-S and Mo-S bonds in the hybrid structure. Particularly, CoSx@MoSx/MoOx(90@360) and MoSx@CoOx(180@180) displayed the best HER performances with low overpotentials of 80 mV and 150 mV, respectively. The catalysts were highly stable, with their stability preserved for over 1000 cycles with marginal reduction in overall efficiency. Therefore, these findings suggest the potential of CoSx@MoSx/MoOx and MoSx@CoOx composites as ideal candidates for developing low-cost catalysts for electrochemical hydrogen production. [ABSTRACT FROM AUTHOR]

Dried blood spot (DBS) based PCR was considered an inexpensive and feasible method for detecting pathogens in the blood. The DBS carrier filter paper and PCR kits are crucial for accurate diagnosis. We evaluated 4 types of filter papers and 20 PCR kits for DBS samples. The PCR detecting Plasmodium results showed that the minimum detection limit of the 4 filter papers was 1 × 102 parasites/μL, and the positive rates of 20 PCR kits ranged from 0% to 100%. PCR results were satisfactory for detecting Plasmodium falciparum (P. falciparum) and Plasmodium. vivax (P. vivax) in archived DBS samples and Babesia gibsoni (B. gibsoni) in fresh pet DBS samples. Our results provided a useful reference for the detection of blood pathogens with DBS samples and direct PCR, especially for screening the cost-efficacy combination of filter paper and PCR kit in resource-limited areas. [ABSTRACT FROM AUTHOR]

This study inspects the viability of engaging the discarded paper wastes in concrete by varying the volume proportions from 0%–20% with each 5% increment in replacement of the weight of cement. A physiomechanical study was conducted, and the results were presented. A glass fiber reinforced rectangular slab with a longer span (ly) to shorter span (lx) ratio of (ly: lx) 1.16 was cast with optimum replacement of waste-paper mass and compared the force-deformation characteristics with the conventional concrete slab without waste paper. The optimum percentage of discarded papers for the replacement of cement is 5%. Also, the results imply that the compressive strength at the age of 28 days is 30% improved for the optimum replacement. Based on the outcomes of the investigation, it can be inferred that the compressive strength gets progressively reduced if the volume of the discarded paper gets increases. The incorporation of glass fibers improves the split and flexural strength of the concrete specimens considerably. The ultimate load-carrying capacity of the glass fiber reinforced waste paper incorporated concrete slab measured 42% lower than that of the conventional slab. However, development of the new type of concrete incorporating waste papers is the new trend in ensuring the sustainability of construction materials. [ABSTRACT FROM AUTHOR]

Summary: In the pulp and paper industry, black liquor, which is a biomass resource, is burned to produce electricity. Black liquor is concentrated to 21 wt% water through an evaporator before being burned in a boiler. For the evaporator, a multiple‐effect evaporator (MEE) is mainly used, but it requires a large amount of energy and cost. Therefore, it is crucial to reduce energy and cost of evaporation process. Hence, this study suggested a novel process model that integrated mechanical vapor recompression (MVR) with MEE to increase the energy efficiency. The suggested MVR‐assisted evaporation process was composed of preheating and evaporation processes to effectively concentrate black liquor. In addition, it reduced the steam consumption of MEE by using MVR, which uses relatively inexpensive electric energy in the pre‐evaporation process. In the simulation results, the steam, electricity consumption, and the latent heat recovered from the secondary vapor of the suggested process were quantitatively analyzed to verify the energy efficiency. The results indicate that the proposed process increases substantial energy efficiency compared to the conventional process. Then, the appropriateness of the suggested process was evaluated by the techno‐economic analysis. The total annualized cost (TAC) is determined for both current and potential future economic benefits. TAC of the MVR‐assisted MEE configuration can be reduced by up to 77.54%. [ABSTRACT FROM AUTHOR]

Integrating more active components into a catalyst material could facilitate the development of multifunctional electrocatalysts for energy conversion and storage applications. In this study, we developed a multifunctional electrocatalyst, namely, Pd alloyed with Co-Fe deposited on N-doped mesoporous carbon derived from tissue paper (Pd@Co-Fe/N-TDC). The synergism in Pd@Co-Fe/N-TDC, stemming from the interatomic alloy between Pd and Co-Fe, N-doped mesoporous carbon with defective surfaces, distribution of polyhedral Pd nanoparticles, and strong metal-support interfacial interaction, resulted in significantly high electrocatalytic performance for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Pd@Co-Fe/N-TDC was found to be an efficient bifunctional oxygen electrocatalyst, and this was evidenced by a high onset potential (1.01 V) and kinetic current density (2.6 mA/cm2) for the ORR and by a low overpotential (296 mV) and a low Tafel slope value (38 mV/dec) for the OER, along with a small Δ E of 736 mV. The catalyst also exhibited high durability for both ORR and OER, even after 10000 and 5000 cycles, respectively. Theoretical assessment provides an insight into the synergism of active metal sites in Pd@Co-Fe/N-TDC, which showed its potential for use as a non-Pt electrocatalyst for energy applications. [ABSTRACT FROM AUTHOR]

Summary: Microfluidic fuel cell (MFC) stacking is a prerequisite to enhance its power output for practical applications. However, most MFC stacks reported in the present literature require external pumps to maintain the co‐laminar flow and complex fluidic management networks for homogeneous flow and reactant distributions. To address these issues, a novel paper‐based self‐pumping MFC stack with potassium formate as the fuel and hydrogen peroxide as the oxidant is proposed in this study. The capillary action is employed to achieve passive liquid flow. A vertical stack structure with the unit cells piled one above another compactly is adopted to reduce the volumetric costs. The experimental results show that the maximum power outputs of the two‐cell and three‐cell stack prototypes are 4.01 and 7.26 mW cm−2, outperforming the MFC unit by 5.81 and 10.52 times, respectively. The superior performance is attributed to its distinct vertical stacking structure, which brings the enhanced capillary flows in the paper wicks and reduced ohmic losses in comparison with the unit cell. Further, effects of the filter paper and reactant concentrations on the stack performance were examined, and mass transfer of the fuel and/or oxidant to the electrode/electrolyte interface was identified as the main limiting factor. A loose microstructure of the paper wick was found beneficial in enhancing the mass transfer. The potential applications of the MFC stack in a variety of portable electronics are broad. [ABSTRACT FROM AUTHOR]

We sought to conduct a bibliometric analysis and review of the most cited publications relating to rugby since 2000 in order to identify topics of interest and those that warrant further investigations. Clarivate Web of Science database was used to perform a literature search using the search term “rugby.” The top 200 papers by citation count were extracted and reviewed for the inclusion criteria: all subjects were rugby players. The top 50 manuscripts were included for analysis of author, publication year, country of lead authors, institution, journal name and impact factor, topic, participant sex, and level of rugby. The total number of citations was 9,071 (average of 181.4 citations/article), with an average journal impact factor of 7.21; the top article was cited 407 times at the time of analysis. The most frequent publication was the Journal of Strength and Conditioning Research (26%), followed by the British Journal of Sports Medicine (20%) and the Journal of Sports Sciences (18%). Forty-eight (96%) of the manuscripts contained only male subjects, with 1 manuscript including females only and 1 manuscript containing mixed sexes. Thirty-three (66%) of the manuscripts focused on professional rugby players, with the next highest player group being mixed levels (10%). Twenty-eight (56%) concentrated on topics regarding strength and conditioning, 11 (22%) on injury, and 4 (8%) on physiology. Despite rugby being one of the most injurious sports and community players representing the largest component of the player pool, most of the top-cited rugby articles are cohort studies of professional male athletes focused on performance and strength and conditioning, noting the bias in research towards socially relevant topics that may not impact the majority of stakeholders and long-term health of rugby athletes. These findings highlight the need for further research among women and community athletes and on topics in injury prevention.

This study examined the chemical composition, fiber morphology, and physical properties of Oxytenanthera abyssinica culm to assess its pulping potential. Technical Association of the Pulp and Paper Industry (TAPPI) and Franklin's methods have been used for experiments. The statistical analysis showed that the chemical composition of O. abyssinica is influenced by the age of the plant. The amount of cellulose in the culm increases with age, while hand extractive content decreases with age. The average chemical content of the three years aged O. abyssinica was 49.26 ± 0.13 wt%, 21.31 ± 0.15 wt%, and 20.63 ± 0.12 wt% for cellulose, hemicellulose, and lignin contents, respectively. A significant difference exists between 1, 2, and 3-year aged plants (P < 0.05) in cellulose, lignin, ash, and extractive content. The position of the culm also affects the fiber morphology of O. abyssinica. The fiber's length, diameter, cell wall thickness, and lumen diameter increase from top to bottom, whereas the flexibility and slenderness ratio decrease. The average fiber morphology of O. abyssinica was flexibility ratio (0.72 ± 0.10), Runkel ratio (0.35 ± 0.10), slenderness ratio (109.98 ± 0.21), lumen diameter (15.63 ± 0.03 μm), cell wall thickness (2.74 ± 0.03 μm), fiber length (2.40 ± 0.10 mm), and fiber diameter (21.83 ± 0.09 μm). The above data showed that the mean value of the fiber length of the plant is greater than 1.5 mm, the Runkel ratio was less than 1, and the slenderness ratio was greater than 70 standard values. The result also showed that the average bulk density and the moisture content were 660 kg/m3 and 9.6%, respectively. Although O. abyssinica is widely grown in the study area, no comprehensive studies have been carried out on fiber morphology, chemical composition, and physical properties based on age and height. Thus, this research was carried out to study the plant's fiber characteristics to assess its suitability for pulp and paper production. Based on the above data, the 3-year aged bottom part of O. abyssinica is recommended for more yield pulp and high-quality paper production than the first and second-year aged plant. [ABSTRACT FROM AUTHOR]

In most cases, the bridge columns are underwater, and there is a risk of corrosion. The columns of marine structures and docks also include such problems. In addition to the problem of environmental hazards, the bridge columns may fail due to design problems or increasing needs. The use of waterproof concrete materials as a jacket can have a role in increasing the life of bridges. Studies in recent years show that some waste from paper industries can be used in the construction industry. In the present study, several concrete stub columns were built as bridge columns and retrofitted with concrete jackets containing waste paper sludge ash, silica nanoparticles, aluminium oxide nanoparticles, and acrylic resin. The variables included the geometric shape of the column (square and circular) and the type of nanoparticles used in the jackets (silica and aluminium oxide nanoparticles), and the curing environment of the columns (normal and sulfate environments). The combined use of nanomaterials and waste paper ash is the most important novelty of the present study. The axial loading test was performed on the columns, and the load-deflection diagrams were obtained. The ductility, stiffness, load-bearing capacity, and crack distribution were among the parameters that were used to compare different modes. The proposed jackets increased the carrying capacity by 10 to 38%, depending on the processing curing environment and the type of nanoparticles. The combined use of aluminium oxide nanoparticles and waste paper ash can improve compressive, tensile, and flexural strengths and increase the axial load capacity of bridge columns. The proposed concrete jacket effectively reduces the corrosion of concrete and steel reinforcement and improves the bridge's useful life. [ABSTRACT FROM AUTHOR]

An investigation was conducted to study the viability of using waste paper pulp ash as an alternative material applied as a partial replacement of cement in the manufacturing of concrete and its effect on the properties of concrete, and also, the cost and environmental advantage of using waste paper were examined. Four concrete mixes with 0%, 5%, 10%, and 15% waste paper pulp ash replacement of OPC and PPC for 25 MPa concrete were prepared. Based on the results obtained from the research, the highest compressive strength obtained at all test ages, i.e., 3, 7, and 28 days, were, 24.36, 28.35, and 36.83 MPa, respectively, with 5% replacement of waste paper pulp ash for OPC, and for PPC, all percentage replacements showed reduction in compressive strength than the control mix. The water absorption of concrete was increased with increasing the percentage of waste paper pulp ash than control concrete. The control concrete clearly has the lowest resistance to 2% sulfuric acid solution compared to blended concrete of OPC-WPPA and PPC-WPPA. The cost comparison indicates that the incorporation of waste paper pulp ash decreases the cost of concrete and WPPA and saves raw materials used in cement and concrete production. [ABSTRACT FROM AUTHOR]

Paper-cutting is one of the valuable intangible cultural heritages of China, with distinctive features such as "round as the autumn moon, sharp as the wheat mane, square as the green brick, missing as the serrated teeth, and thread as the beard," and is a widely spread folk art. The art of paper-cutting brings new inspiration to the design of structures, and by changing the topology of the raw material, the material/structure can undergo significant changes in physical properties, such as optical, thermal, acoustic, and mechanical aspects. The protection of intangible cultural heritage is a process of cultural self-awareness and a kind of cultural reflection and enlightenment. In the history of promoting socialist cultural development, the protection of "intangible heritage" paper-cutting is undoubtedly of great significance. The purpose of digital image repair is to restore the integrity of the broken image, and the process is to fill in the specified area of the digital image with information, requiring a natural transition between the filled area and the original area of the image and minimizing artificial traces, so that the image looks as if it has never been broken. In this paper, the paper-cutting pattern design method based on image restoration technology is investigated, starting from the preprocessing of paper-cutting images by acquiring the edges of the images and using the Criminisi image restoration algorithm with image broken edge reconstruction to realize the image broken edge reconstruction design of paper-cutting graphics. Therefore, the paper-cut graphics generated by the method in this paper are concise and coherent as a whole, which reduces the difficulty of paper-cut design while satisfying individual design requirements. [ABSTRACT FROM AUTHOR]

A scientific paper's citation represents its influence, which is the most intuitive indicator to access the quality of papers. This paper mainly adopts the social network analysis method, using the authors and the keywords of sports industry papers in China to constitute the networks of collaboration and knowledge, to explore effects of the degree centrality of authors and keywords and the structural hole of authors and keywords on the citation of papers in the collaboration and knowledge networks and draw the following conclusions: (1) as for collaboration networks, the degree centrality at the paper level is positively correlated with citations; (2) in the collaboration network, the positive correlation between the structural hole at the paper level and citations does not exist; (3) within knowledge networks, an inverted- U shape was found between degree centrality and paper's citation; and (4) within knowledge networks, a positive correlation is in existence between the structural hole of papers and their citation. This study synthesizes the already widely used collaboration network with the knowledge network constructed through keywords, distinguishes from the previous network features focusing at the author level, and explores research projects of Chinese Sports Industry from the paper level, providing a new perspective for the research of sports industry in China, complementing the methods and ideas of sports industry research, as well as providing a reference for the research in other disciplinary fields. [ABSTRACT FROM AUTHOR]

In this paper, we improve the efficiency and effectiveness of the matrix factorization method in the paper recommendation system. We mainly address two problems. First, the vectors based on citation networks are undertrained because newly added papers are rarely cited. Second, current algorithms are mainly based on keyword search or global popularity and lack the organic combination of considering personalized interest and global popularity. To address the above two issues for the paper recommender, we propose a matrix factorization model that combines popularity analysis and attention mechanisms. The model effectively fuses the similarity of the citation network and topic using the multiplicative law, which can alleviate the data sparsity problem. Especially for cold-start papers, we add second-order neighbor nodes to makeup for the problem that newly joined papers don't get enough training. We propose a keyword attention mechanism that combines user preferences and global popularity to personalize and balance the popularity of papers. Through comprehensive experiments on the CiteULike dataset, we show that our method can significantly improve the paper recommendation effectiveness. [ABSTRACT FROM AUTHOR]

Folk paper-cut art is one of the bright pearls, with a wide range of shapes and a long history, that serves as a model for modern visual communication design in China and encourages designers to think creatively. Integrating emotional elements into a design not only can elicit an emotional response from the viewer but also can make works created using traditional rational thinking more vivid, energetic, and touching. The main focus of this research is on the path and method of incorporating folk paper-cut emotion into visual communication design. The research status of various feature extraction methods and image recognition methods at home and abroad is examined in depth in this paper. For the recognition of distorted images that are not transformed by mathematics, some effective methods are proposed. They are used to recognize artistic images of paper-cut patterns because they can extract effective features that are not affected by translation, rotation, scale change, or small deformation. Experiments have shown that they have a positive impact. The use of folk paper-cut art in visual communication design not only improves the quality of design work but also generates new ideas for the transmission and development of other traditional Chinese cultures. [ABSTRACT FROM AUTHOR]

This paper introduced a novel olfactory visualization freshness sensor array prepared by dropping pH indicators on UV lithography hydrophilic–hydrophobic paper under room temperature. The sensor array was applied in Grass carp spoilage classification. The sensor array can generate different discoloration patterns that respond to the pH change of the fish spoil; therefore, it can distinguish Grass carp freshness using pattern recognition. Classification models were built with linear discriminant analysis (LDA) and backpropagation artificial neural network (BP‐ANN) after extracting the sensor array's feature color information with principal component analysis (PCA). The performance of the BP‐ANN model was superior to that of the LDA model, with an optimum recognition rate of 95.45% (training set) and 90.90% (testing set). In conclusion, with a suitable algorithm choice and rational pH indicator arrangement, this olfactory visualization freshness sensor array can potentially monitor food freshness. We prepared Grass carp freshness sensor array through dropping pH‐indicators on hydrophilic–hydrophobic filter paper that fabricated by UV lithography under room temperature. The hydrophobic edges of the filter paper can maintain the sensor spots' shape and provide stable and consistent colorimetric change for Grass carp freshness recognition. Colorimetric classification models are built using LDA and BP‐ANN based on pattern recognition, and the recognition rate of the BP‐ANN model is above 90%. Novelty impact statement: We prepared Grass carp freshness sensor array through dropping pH‐indicators on hydrophilic‐hydrophobic filter paper that fabricated by UV lithography under room temperature. The hydrophobic edges of the filter paper can maintain the sensor spots' shape and provide stable and consistent colorimetric change for Grass carp freshness recognition. Colorimetric classification models are built using LDA and BP‐ANN based on pattern recognition, and the recognition rate of the BP‐ANN model is above 90 %. [ABSTRACT FROM AUTHOR]

Green packaging wrap is now required to replace the synthetic plastic coating on the paper substrates. The coating of natural biopolymers on the paper substrates would be a potential method to achieve an ecofriendly coating to replace the synthetic materials which give a threat to the environment. Recently, spraying cellulose nanofiber (CNF) on the paper substrates to boost the barrier and mechanical properties of the paper is a flexible process and potential for scalability. Sprayed cellulose nanofibrils fill the surface pores of the paper substrates and form a barrier film on the paper surface. The spray-coated CNF barrier film on the paper substrates reduced the air passage and increased the mechanical strength. To scale up the process of spraying, the optimization was performed via response surface methodology to investigate the interaction between input variables and their response in spraying process. The variables impacting on the barrier performance, CNF coat weight, and thickness of the coat during spraying are CNF suspension concentration (A), fiber diameter (B), and spray distance from tip to the surface (C). The linear models were developed for CNF coat weight and thickness of the CNF coat weight on the paper substrates. The quadratic model for air permeability was developed with input variables. It concludes that the CNF suspension concentration is a strong parameter for controlling the CNF coat weight and thickness of the CNF coat on the paper substrates. The developed linear and quadratic models were validated with the experimental data confirming that it was a good fit to the real experimental data. From the CCD investigation of spray coating of CNF on the paper substrates, >1 wt.% CNF coating on the paper surface produces good thickness and coat weight on the paper substrates and gives an impermeable CNF laminate on the paper substrates against air. In conclusion, these models could provide a platform for scaling up the spraying process for coating CNF-based nanomaterials on the paper substrates. [ABSTRACT FROM AUTHOR]

The development of learning theories, present societal needs, and the positive empirical findings in the relevant literature support the thesis that inquiry-based learning (IBL) is promising for teaching and learning, which deserves further development. Few studies have been conducted on content analysis of IBL in science education at the international level. However, the overall trends of IBL in science education research trends in Ethiopia are not well known. Therefore, this study aimed to investigate the nature and status of inquiry-based learning research in Ethiopia by employing a quantitative method. A total of 23 studies, including 14 theses, eight articles, and one dissertation were analyzed in terms of the methodological approaches used and the subjects studied. The most frequently investigated IBL science areas were biology (43.5%) and chemistry (34.75%). Guided inquiry (69.6%) (5E model = 65.2% and 7E model = 4.4%) studies were the most frequently investigated inquiry types. Teaching (47.8%) and learning (43.5%) were the most frequently focused subject matters of the studies reviewed, while cognitive elements (58.6%) were the most frequently used research elements in IBL studies, and quantitative studies with predominantly quasi-experimental methods (60.9%) were widely employed. The findings of this study indicated that IBL was found to be a new research area in Ethiopia where it has been practiced in science education at the primary level. This study is considered useful to develop an understanding of the nature and status of IBL research in Ethiopia and provide information on what could be done about IBL in the future.

To explore the reinforcement effects of different reinforcement methods, kraft paper was used as reinforcement material, and shear tests were carried out in sand to study the reinforcement effects of kraft paper perpendicular and parallel to the shear plane. The test results show that the two reinforcement methods can effectively improve the strength of sand and the orthogonal reinforcement form is more superior. The existence of reinforced materials greatly improves the cohesion of sand, but does not significantly improve the internal friction angle. The width of reinforcement material has little effect on the reinforcement effect and shows different variation laws under different reinforcement forms. [ABSTRACT FROM AUTHOR]

This paper presents a comprehensive study and analysis of the intelligent grouping of papers in adult higher education using a random matrix approach. Using the results of random matrix theory on the eigenvalues of the sample covariance matrix, the energy of each subspace is estimated, and the estimated energy is then used to construct a subspace weighting matrix. The statistical properties of the sample covariance matrix eigenvectors are analyzed using the first-order perturbation approximation, and then, asymptotic results from random matrix theory on the projection of the sample covariance matrix signal subspace to the real signal parametrization are used to obtain the weighting matrix based on the random matrix eigenvectors. Dynamic adjustment according to the fitness of individuals in the population is performed to ensure population diversity, while the combination of the small habitat technique can avoid the algorithm from falling into early convergence. The algorithm introduces chaos theory to optimize the population initialization process and uses the dynamic traversal randomness of chaos to select individuals in the population so that the initial population is close to the desired target solution. The design of the fitness function in the genetic algorithm generally maps the objective function of the problem to the fitness function. A good fitness function can directly reflect the quality of the individuals in the group. Based on the in-depth study of the basic attributes of the test questions and the principles of test paper evaluation, the mathematical model and objective function of intelligent paper grouping are determined by the difficulty, knowledge points, and cognitive level of the test questions as the main constraints, and NCAGA is applied to the intelligent paper grouping method, which better completes the intelligent paper grouping session for the computer system architecture course. In the process of designing the intelligent grouping algorithm, for the situations of premature convergence and convergence to locally optimal solutions that easily occur in the traditional genetic algorithm, this paper adopts the approach of adaptive adjustment of crossover probability and variation probability to improve the algorithm and achieves satisfactory results. Based on extensive business research, this paper completes the requirement analysis of the online practice system based on the intelligent grouping of papers and presents the functional design and database design of the key functional modules in the system in detail. Finally, this paper conducts functional tests on the system and analyses the test results. [ABSTRACT FROM AUTHOR]

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers' abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations. [ABSTRACT FROM AUTHOR]

To enhance the quality and efficiency of computer-enabled generation of papers for Test for English Majors Band 8 (TEM-8), a paper generation model supported by sparrow search algorithm-genetic algorithm was studied. First, a simplified test paper generation mathematical model was set up after analyzing and studying types and characteristics of TEM-8 tasks. In the model, quantity, type, difficulty, discrimination degree, scores, exposure, and answering time of test questions were taken into consideration. To enhance the optimizing effect of the genetic algorithm for searching test questions, the traditional genetic algorithm was improved by introducing the sparrow search algorithm into the model to achieve a better crossover rate, variance rate, optimization precision, and speed of the genetic algorithm. A new sparrow search-genetic algorithm (SSA-GA) was designed, and the optimizing effect of SSA-GA was verified to be ideal through optimizing six standard test functions. Then, SSA-GA was applied to conduct experimentation with test paper generation, and comparison with traditional genetic algorithms was also made. The values of best and average fitness of SSA-GA were better than those of the traditional genetic algorithm (GA) in the paper generation. Exposure rate and success rate in TEM-8 paper generation of SSA-GA were higher than those of traditional GA in TEM-8 paper generation. Results showed that the studied SSA-GA could implement test paper generation with higher speed and better quality. [ABSTRACT FROM AUTHOR]

Medical imaging refers to the process of obtaining images of internal organs for therapeutic purposes such as discovering or studying diseases. The primary objective of medical image analysis is to improve the efficacy of clinical research and treatment options. Deep learning has revamped medical image analysis, yielding excellent results in image processing tasks such as registration, segmentation, feature extraction, and classification. The prime motivations for this are the availability of computational resources and the resurgence of deep convolutional neural networks. Deep learning techniques are good at observing hidden patterns in images and supporting clinicians in achieving diagnostic perfection. It has proven to be the most effective method for organ segmentation, cancer detection, disease categorization, and computer-assisted diagnosis. Many deep learning approaches have been published to analyze medical images for various diagnostic purposes. In this paper, we review the work exploiting current state-of-the-art deep learning approaches in medical image processing. We begin the survey by providing a synopsis of research works in medical imaging based on convolutional neural networks. Second, we discuss popular pretrained models and general adversarial networks that aid in improving convolutional networks' performance. Finally, to ease direct evaluation, we compile the performance metrics of deep learning models focusing on COVID-19 detection and child bone age prediction. [ABSTRACT FROM AUTHOR]

Summary: Tremendous research has focused on the wearable electronic device, leading to the basic requirement of suitable power sources. Herein, we report one bendable paper‐based zinc‐air battery with a novel hollow channel structure. It achieves a maximum power density of 138 mW/cm2, outperforming the state‐of‐art paper‐based batteries reported previously. The boosted performance is assigned to the low charge transfer resistance and facilitated mass transfer from the hollow structure. It demonstrates the positive design of microchannel structure is profitable for the power‐generation enhancement, and offers a possible route to commercialize the paper‐based power generators. [ABSTRACT FROM AUTHOR]

After hundreds of years of changes, due to the development of chemistry, the development of human life has undergone tremendous changes. People have used chemical science to manufacture many supplies, such as various medicines and various types of cosmetics. In recent decades, electronic components and computer software technology have developed rapidly, and the fourth round of technological revolution is underway, which has a favorable impact on the development of various industries. Traditional paper-cut and cosmetic bag design methods should also take into account the advantages of wireless communication and artificial intelligence technology and combine other types of traditional industries to carry out technological reforms to help traditional craftsmanship pass down. In modern life, due to the vigorous promotion of cosmetics, there are more and more cosmetics on the market, and the traditional paper-cut art itself is an artistic design method similar to cosmetic design. Both industries will grow rapidly after the use of artificial intelligence and wireless communication technology for the update of both industries. Therefore, the purpose of this paper is to combine wireless communication technology with artificial intelligence technology to transform the traditional paper-cut art and cosmetic packaging design. After consulting the reasons for the decline of the traditional handicraft industry and the reasons for the turmoil caused by modern technology, this paper conducts a combined design of artificial intelligence technology, wireless communication technology, and cosmetic packaging and then performs wireless communication and artificial intelligence on the cutting of traditional paper design elements. The design of the technical matching system is also designed for traditional paper-cut art and cosmetic packaging. And find professional practitioners for research and discussion and multiple transformations and obtain experimental analysis results data. After many experiments, it can be seen that the combination of wireless communication and artificial intelligence technology can transform the traditional paper-cut art and cosmetic packaging design, improve their relevance, continue the inheritance of paper-cut art, and possibly improve the efficacy of cosmetics. [ABSTRACT FROM AUTHOR]

The presence of floating plants is becoming an uncontrollable issue on the banks of Douala, Cameroon, notably in the city of Bonaberi, where the water hyacinth is expanding incredibly quickly. The aim of this study is to evaluate the mechanical and physicochemical performance of water hyacinth fibers for pulp manufacture. To this end, tensile tests on fiber bundles in accordance with ISO 13934-1:2013, thermogravimetric analysis (TGA), chemical composition evaluation in accordance with ASTM 1972 and 1977, and absorption rate were carried out. The results obtained indicate that the fiber is composed of a variety of fibrils with irregular cross-sections, with an average diameter ranging from 0.02 to 0.09 mm. The fibers absorb 42.03% of their weight in water, and their density ranges from 1.23 to 1.45 g/cm3. According to mechanical tests, the fiber has a maximum tensile strength of around 0.64 MPa, a specific modulus of 6.45 MPa/g/cm3, and an elongation at break of 1.8%. For the chemical characteristics of the fiber, cellulose, hemicellulose, and lignin contents are 68.3%, 11.3%, and 7.4%, respectively, while pectin and ash content concentrations are 4.8% and 7.8%, respectively. Thus, in order to determine whether the plant is suitable for making pulp and paper, this investigation was conducted to examine its fiber properties. It was found that the water hyacinth fibers were superior to flax straw and jute fibers in all qualities, but not as good as silk cotton and bagasse fibers. Given the information above, water hyacinth has been recognized as a potential raw material for the pulp and paper industries, though. [ABSTRACT FROM AUTHOR]

Summary: Direct liquid fuel cell (DLFC) and membraneless fuel cell using the anode consisting of buckypaper (BP) and vitamin B12 (Vit B12) (BP/Vit B12) is introduced in physiological condition, while vitamin C (Vit C) is used as anodic fuel. Due to the high sensitivity of Vit B12 and the inherent feature of BP, the onset potential for the oxidation reaction of Vit C catalyzed by BP/Vit B12 is −0.1 V (vs Ag/AgCl), and its anodic current density measured at 0.3 V (vs Ag/AgCl) is 1.82 mA cm−2 even in a low Vit C concentration (10 mM). Regarding performance in fuel cells, maximum power density (MPD) of Vit C fuel cell containing membrane and Pt‐based air cathode is 0.62 ± 0.067 mW cm−2 in 0.01 M Vit C, and this is 3.1 times higher than that of fuel cell containing pristine BP. In addition, in a paper‐based flexible membraneless fuel cell using BP/bilirubin oxidase as cathode and the concentration of cerebrospinal fluid within the human body (0.35 mM Vit C), its MPD is 57.7 ± 4.02 μW cm−2. This means this suggested Vit C fuel cell system can replace the conventional primary batteries considered as the power source of implantable sensors and stimulation devices to treat neurological disorders. [ABSTRACT FROM AUTHOR]

This study aimed to investigate the applicability of novel colorimetric paper‐based pH‐sensitive indicator labels for monitoring the shelf life of the chicken breast fillets packaged under air oxygen until 10 days at 4°C. The color changes of the indicator labels were observed using the mobile phone after storage for days 0, 5, and 10. The result revealed that the indicator labels could be used to determine the freshness of the product as a part of intelligent packaging since the color of all indicators changed, depending on the pH changes of the chicken breast fillets. However, the synthetic and the red cabbage‐based indicator labels are found more sensitive to color changes compared to other selected natural‐based indicators. Moreover, the indicator labels have no toxic effect and are reliable and easy to use for monitoring the shelf life of meat and meat products. Novelty impact statement: A novel freshness indicator was developed based on natural (pomegranate, red cabbage, and turnip juice) and synthetic dye (bromocresol green, and methyl red) to detect physicochemical and microbiological changes in the chicken breast fillet for consumers as an alternative to the expiry date.The color of the indicator labels has changed depending on changes in the pH value of the chicken breast fillet packaged under air oxygen.It is considered that the developed indicator labels will contribute to new scientific research about intelligent packaging systems. [ABSTRACT FROM AUTHOR]

In recent years, with the rapid development of the Internet industry, the publicity effect of paperbark walnuts has been substantially increased, and the consumption and demand of paperbark walnuts have been rising, and the output of paperbark walnuts in China has also increased year by year. This paper takes the panel data of the top three prefecture-level cities in each GDP ranking of five provinces in northwest China from 2012 to 2021 as the sample and combines the DEA model with Malmquist to evaluate and analyze the logistics efficiency of paper walnuts in northwest China. It is found that the overall logistics efficiency of paperback walnuts in Northwest China has been improved in recent years, but there are still areas that need to be improved, such as the factor distribution is not reasonable enough; the logistics efficiency of paperback walnuts in Northwest China from 2012 to 2021 is in a fluctuating state; the logistics efficiency of paperback walnuts in Shaanxi Province is better than the other provinces and is in the leading position; the improvement of technological progress has a key role in the total factor productivity improvement. As a result, this paper puts forward five specific suggestions based on the research results to help accelerate the improvement of paper walnut logistics efficiency in Northwest China. [ABSTRACT FROM AUTHOR]

Today, computer graphics and graphic image processing techniques have been widely used in daily life and industrial production. Due to the development of computers, computer graphics has brought more convenience to our daily life. In order to give full play to the value of computers, this paper takes the Hakka paper-cut art with local characteristics as the starting point, first of all its development history, artistic characteristics, compositional forms, expression techniques, cultural connotations, Hakka paper-cut patterns, and the symbolic meaning of folk customs, and then we design a visualization system for the paper-cut works of Gannan Hakka based on computer graphics. In addition, the system provides a solution for the integration of Gannan Hakka paper-cut art and Jiangxi native product packaging design and provides a reference for the theory and practice of modern native product packaging design. [ABSTRACT FROM AUTHOR]

In order to improve the effect of intelligent automatic test paper composition, this paper combines the hybrid fuzzy clustering algorithm to study the computer automatic test paper composition algorithm. In this paper, a computer automatic test paper composition system based on hybrid fuzzy clustering algorithm is constructed. Moreover, the hybrid fuzzy clustering method used in this paper is used as the basic algorithm of the system, and the algorithm is improved according to the actual needs of intelligent paper composition. In addition, this paper uses an intelligent algorithm to input the relevant constraint parameters and combines the original parameters to select the most suitable test questions from the database and combine them into test papers. Finally, this paper constructs the system structure based on the requirements of intelligent test paper composition. The experimental research shows that the computer automatic test paper composition system based on the hybrid fuzzy clustering algorithm proposed in this paper has a good test paper composition function, which can effectively promote the progress of the intelligent examination mode in colleges and universities. [ABSTRACT FROM AUTHOR]

Objectives. To evaluate the usefulness of a novel acoustic uroflowmetry- (UFM-) based mobile application (app) voiding diary (VD) focusing on the (1) compliance and (2) correlation with a conventional paper-based VD. Materials and Methods. A total of 78 patients were included between December 2019 and June 2020, and a subsequent review of all data was performed. The analyzed data were as follows: (1) survey of convenience/satisfaction/preference comparing the two methods, (2) compliance regarding the completeness of both methods, and (3) correlation of each metric (24-hour urine volume, nocturnal urine volume, nocturnal polyuria index, total number of voids, number of daytime voids, number of nocturnal voids, and maximal bladder capacity) between the two methods. Results. The survey results of convenience, satisfaction, and preference were as follows. With regard to convenience and satisfaction area, higher scores are reported in the mobile app VD (mean ± standard deviation (SD); convenience: 7.47 ± 2.19 [app] vs. 4.20 ± 2.49 [paper]; satisfaction: 7.36 ± 2.17 [app] vs. 5.07 ± 2.65 [paper]). The median score of the overall preference for using the mobile app instead of the paper-based VD was 9 out of 10 (mean ± SD 7.82 ± 2.68). We also found a good correlation between the two methods for nocturnal urine volume (r = 0.55 , p = 0.04), nocturnal polyuria index (r = 0.66 , p = 0.23), total number of voids (r = 0.9 , p = 0.02), number of nocturnal voids (r = 0.83 , p = 0.02), and maximal bladder capacity (r = 0.89 , p = 0.04). Conclusion. The acoustic UFM-based mobile app VD demonstrated favorable findings compared to the conventional paper-based VD. [ABSTRACT FROM AUTHOR]

In the cloud computing era, a paper recommender system is usually deployed on the cloud server and return recommendation results to readers directly. However, considering the paper recommender system, processing tremendous paper citation data on the cloud cannot provide fine-grained personalized and real-time recommendations for each reader because these recommended papers from the cloud are far from readers and probably not correlated strongly with each other for helping each reader research further and deeper in the interested field. Recently, the edge-cloud collaboration-based recommender system has been used for releasing parts of the cloud computing task to the edge and provides the recommendation near the client. Based on the edge computing recommender system, a keywords-driven and weight-aware paper recommendation approach is presented, namely, LP-PRk+ w (link prediction-paper recommendation), to enable intelligent, personalized, and efficient paper recommendation services in the mobile edge computing environment. Specifically, the whole paper recommendation process mainly covers two parts: optimizing the existing paper citation graph via introducing a weighted similarity (i.e., building a weighted paper correlation graph) and then recommending a set of correlated papers according to the weighted paper correlation graph and the users' query keywords. Experiments on a real-world paper correlation dataset, Hep-Th, show the capability of our proposal for improving the paper recommendation performance and its superiority against other related solutions. [ABSTRACT FROM AUTHOR]

Treat‐to‐target (T2T) recommendations for the use of systemic therapies (including biologics) in patients with moderate‐to‐severe plaque psoriasis have been published by a few groups of experts worldwide. However, there remains considerable variability in the choice of target severity measure and timing of milestones. To develop consensus recommendations for implementing T2T strategies for the management of moderate‐to‐severe plaque psoriasis using biologics. An expert group of Canadian dermatologists (the Committee) convened to develop a T2T consensus statement. They held a virtual meeting during which a preliminary set of criteria was created. These criteria were then reviewed, modified, and recirculated until unanimous agreement was achieved. The Committee agreed that defining treatment target is multidimensional and should reflect objective severity measures, as well as clinician and patient‐reported outcomes. The Committee unanimously proposes a criterion‐based system for determining the achievement of treatment target. The proposed T2T approach presented here provides a clinical framework for defining treatment success, measuring progress toward treatment success, recognizing when treatment modifications are warranted, and recommending treatment optimization strategies. [ABSTRACT FROM AUTHOR]

Nanobiotechnology is a growing branch of research that combines biology and nanotechnology to study and create unique, functionalized nanobiosystems. This interdisciplinary study subject has significant promise for improving medical engineering. Finding the exact blood category is a coercive test for blood transfer and other incalculable health checkups. The pandemic has accelerated these test frequencies in an exponential fashion. It is usually the job of the practitioners working in the laboratory to name the types of blood samples. Depending on the blood type and its cross-matching fitness, recommendations are offered for blood transfer. In many places, this type of testing is done manually, and it is done through a microplate and test tube. These tests usually take longer, and the chances of errors are high, which can lead to fatalities. Polymer-based paper sample collection has been shown to be ideal instruments for conducting blood tests in response to this requirement because of their capacity to do quick and low-cost diagnostics and analyses. In this paper, a novel nanocoated blood polymer sample paper with unique coding was proposed and investigated for its operational simplicity and effectiveness. A unique coded polymer sample paper has prevented complications during blood tests and provides expected results without errors. [ABSTRACT FROM AUTHOR]

Phosphate concentration in natural water has been used as a water quality indicator, as it is one of the major nutrients for aquatic plants. However, the traditional phosphomolybdenum blue (PMB) method has limited sensitivity for visual or camera-based detection, leading to underestimation of the phosphate concentration. We present an ultralow-cost, rapid field preconcentration and digital image colorimetric sensing of low-concentration phosphate method for water analysis. A novel hand-powered paper centrifuge (paperfuge) is used for sample preparation and preconcentration. This paperfuge is made of two circular paper discs and a string. Six centrifuge tubes (CTs) originally used as glue dispensing tips with a sample capacity of ∼230 μL, are loaded on the paperfuge. After sampling, phosphate in the water sample is reacted to form PMB. Then, the reacted sample is drawn into a CT using an autopipette before the CT bottom is sealed by glue. After Oasis® HLB sorbents are added through the top of the CT, the CT top is also sealed with glue. The HLB sorbents adsorb PMB and are accumulated in the CT tip through centrifugation. The CT tips are cut and analyzed with the ImageJ software. It was found that the blue color intensity of sorbents is in a linear relationship to the phosphate concentration, with a linear range of 0–5 μM (r2 = 0.9921) and limit of detection of 0.19 μM. In addition, this method has been applied to in-field water analysis. The results are in agreement with the standard PMB method. [ABSTRACT FROM AUTHOR]

With the increasing frequency of scientific cooperation, research on the impact of scientific cooperation on scholars' scientific performance has become a hot topic in academic research. This paper mainly uses quantitative research methods such as bibliometrics and social network analysis to analyze the correlation between degree centrality, L-index, and scientific performance of the Chinese author of Physical Education and Training Science and draws the following conclusions: (1) degree centrality is positively correlated with the number of papers, average citations per paper, and H-index and (2) L-index is positively correlated with the number of papers, average citations per paper, and H-index. Unlike previous studies on scientific collaboration networks and scholars' performance that focused on traditional network characteristics indicators, this study introduces a new network characteristics indicator, L-index, through which the degree of collaboration between authors and other important authors in the research field can be better assessed, which also provides a new direction for research related to research collaboration networks and scholars' performance; at the same time, it also provides a theoretical basis for subsequent research on the utility of scientific collaboration, a reference for the assessment of the research performance of scholars in other disciplines, and a theoretical reference for more scientific and comprehensive prediction of scholars' research performance in the future. [ABSTRACT FROM AUTHOR]

Environmental pollution has become an important obstacle on the path of ecological civilization construction, and it is urgent to control environmental pollution. By establishing an evolutionary game model, this thesis focuses on analyzing how paper-making enterprises choose their own emission reduction strategies under the reward and punishment mechanism. It further analyzes how social welfare changes under the reward and punishment mechanism, and finally through simulation research, this thesis analyzes the evolutionary paths of paper-making enterprises' pollution emission strategies under the reward and punishment mechanism. The results of the reward and punishment mechanism are as follows: under the static reward and punishment mechanism, the game system will repeatedly oscillate around a point. There is no stable equilibrium point at this time. However, under the dynamic reward and punishment mechanism, the game system will tend to a stable equilibrium point. The results of social welfare analysis show that high-intensity rewards will reduce the amount of pollution discharged by paper-making enterprises, thereby maximizing social welfare. On the contrary, when paper-making enterprises discharge a large amount of pollution, they will be subject to high-intensity penalties. When facing high-intensity punishments, paper-making enterprises will tend to not to discharge. So social welfare is also maximized. The simulation research results show that reasonable punishment strategies are more effective than reward ones. Based on this, the author proposes countermeasures, such as establishing a reasonable reward and punishment mechanism, reasonably determining the reward and punishment intensity for polluting enterprises. The emission reduction strategies of paper-making enterprises will be affected by the government's reward and punishment mechanism. A deep study of its internal mechanism is not only of great significance for pollution control but also of great significance for the development of a green economy. [ABSTRACT FROM AUTHOR]

Distributed multitarget tracking (MTT) is suitable for sensors with limited field of view (FoV). Generalized covariance intersection (GCI) fusion is used to solve the MTT problem based on label probability hypothesis density (PHD) filtering in this paper. Because the traditional GCI fusion only has good fusion performance for the targets in the intersection of each sensor's FoV, and the targets outside the intersection range would be lost, this paper redivides the Gaussian components according to the FoV and distinguishes the Gaussian components of the targets inside and outside the intersection. GCI fusion is sensitive to label inconsistency between different sensors. For label fusion in the intersection region, the best match of labels is found by minimizing label inconsistency index, and then GCI fusion is performed. Finally, the feasibility and effectiveness of the proposed fusion method are verified by simulation, and its robustness is proved. The proposed method is obviously superior to local sensor and traditional GCI algorithm. [ABSTRACT FROM AUTHOR]

An electrocardiogram (ECG) uses electrodes to monitor the heart rhythm and identify minute electrical changes that occur with each beat. It is employed to investigate particular varieties of aberrant heart activity, such as arrhythmias and conduction problems. One of the most essential tools for detecting heart problems is the electrocardiogram (ECG). The majority of ECG records are still on paper. Manual ECG paper record analysis can be difficult and time-consuming. It is possible to digitally digitize these paper ECG recordings for automated analysis and diagnosis. In this paper, we proposed a system to digitize the ECG paper, automatically detecting R peaks, calculating the average heart rate, and sending SMS to the doctor via cloud in the event of detection of abnormality. The method of the system is uploading an ECG image, then dimensionality reduction, feature extraction in the form of digital signals, and saving it in a CSV file format using the MATLAB programming language. After that, the system retrieves the signals for further processing of the raw signals. We used the fast Fourier transform (FFT) algorithm to calculate R peaks and calculate the heart rate. If the heart rate is abnormal, the system sends SMS messages to doctors via a technology platform (Twilio) using the Python programming language. [ABSTRACT FROM AUTHOR]

The conventional method of employing low temperatures for storage and distribution has long been the standard approach for preserving most fruits and vegetables. This practice is likewise prevalent in the retail industry, which relies on similar methods for transporting and maintaining the quality of perishable products on their shelves. The aim was to preserve bananas (Musa paradisiaca) using an ethylene scavenger, potassium permanganate, which is contained in small paper bags, to increase the storage and distribution time at low cost. The bananas were distributed in four plastic containers at a temperature of 23°C, three of the treatments contained different concentrations of potassium permanganate, and one was potassium permanganate free. The experimental period was 19 days, and the variations in weight loss, pH, titratable acidity, texture, color, and total soluble solids were analyzed. Potassium permanganate effectively reduced the changes in their physiological ripening. [ABSTRACT FROM AUTHOR]

The development of probes for the testing of the carcinogenic pollutant 2,4,6-trinitrophenol (TNP) is of great importance for environmental protection and human health. In this paper, a new rapid and sensitive fluorescence detection method based on carbon dots (CDs) was designed for the detection of TNP. The CDs were synthesized by simple pyrolysis using citric acid as raw material and characterized by various advanced techniques. The addition of TNP caused a significant turn off in the fluorescence of the CDs. The fluorescence quench intensity and TNP concentration exhibited a good linear correlation in the range of 0–80 μM with a minimum detection limit of 0.48 μM and a related coefficient of 0.994. The analytical method was applied to the determination of trace TNP in river water and tap water with recoveries in the range of 98%–110% and relative standard deviations less than 5%. Importantly, carbon dots functionalized papers (CDFPs) were prepared using the synthesized CDs and successfully applied to the determination of TNP in aqueous solutions, demonstrating the promising application of the method. [ABSTRACT FROM AUTHOR]

Summary: Coronavirus disease (COVID‐19) has spread all across the world. Low‐ and medium‐income countries are more affected economically and socially compared to developed countries due to the lack of a rapid, robust, and affordable testing infrastructure. Furthermore, the high cost of real‐time polymerase chain reaction (PCR) system, sophisticated user‐handling procedure, and high expense of the conventional clinical tests are the root causes of the less accessibility of the testing systems to the users. In this study, a COVID‐19 Point‐of‐Care (POC) ecosystem model is proposed for the low‐ and medium‐income countries (or energy deprived countries) that will facilitate the technological development with locally available fabrication components. In addition, the nontechnological development phases have also been discussed, which encompasses the collaboration among academia, local as well as government bodies, and entrepreneurial ventures. In addition, a hypothetical design of a microfluidic paper‐based analytical (μPADs) POC platform is proposed to detect COVID‐19 analyte using unprocessed patient‐derived saliva, which is a miniaturized form‐factor of conventional real‐time polymerase chain reaction (PCR) technique. The device contains four major reaction zones, which are sample zone, buffer zone, loop‐mediated isothermal amplification (LAMP) Master Mix zone, Ethylenediamine tetraacetic acid (EDTA) zone, and sensor zone. To obtain quicker test results and easier operation, a handheld image acquisition technique is introduced in this study. It is hypothesized that in a remote setting, the proposed design could be used as an initial guideline to develop a POC COVID‐19 testing system, which may be simple, easy‐to‐use, and cost‐effective. [ABSTRACT FROM AUTHOR]

We sought to conduct a bibliometric analysis and review of the most cited publications relating to rugby since 2000 in order to identify topics of interest and those that warrant further investigations. Clarivate Web of Science database was used to perform a literature search using the search term "rugby." The top 200 papers by citation count were extracted and reviewed for the inclusion criteria: all subjects were rugby players. The top 50 manuscripts were included for analysis of author, publication year, country of lead authors, institution, journal name and impact factor, topic, participant sex, and level of rugby. The total number of citations was 9,071 (average of 181.4 citations/article), with an average journal impact factor of 7.21; the top article was cited 407 times at the time of analysis. The most frequent publication was the Journal of Strength and Conditioning Research (26%), followed by the British Journal of Sports Medicine (20%) and the Journal of Sports Sciences (18%). Forty-eight (96%) of the manuscripts contained only male subjects, with 1 manuscript including females only and 1 manuscript containing mixed sexes. Thirty-three (66%) of the manuscripts focused on professional rugby players, with the next highest player group being mixed levels (10%). Twenty-eight (56%) concentrated on topics regarding strength and conditioning, 11 (22%) on injury, and 4 (8%) on physiology. Despite rugby being one of the most injurious sports and community players representing the largest component of the player pool, most of the top-cited rugby articles are cohort studies of professional male athletes focused on performance and strength and conditioning, noting the bias in research towards socially relevant topics that may not impact the majority of stakeholders and long-term health of rugby athletes. These findings highlight the need for further research among women and community athletes and on topics in injury prevention. [ABSTRACT FROM AUTHOR]

The present study is focused on the availability of microbial sources capable of producing xylanase, a hemicelluloses-degrading enzyme with multiple modes of action along with specificity, and their real-world applications. For the accumulation of suitable data, article surfing was carried out using multiple search engines viz. Hinari and PubMed; irrelevant and duplicate articles were discarded and articles were summarized in a narrative way herein. This review article was written aiming to bridge the recent research activities with the commercial activities of xylanase going on around the globe. The readers would be able to acknowledge themselves with the basic idea of the hydrolytic enzyme xylanase, their classification representing their different families, presenting the affinity of different families at the structural level, the sources, and the commercial implications that have been going on alone and in combination. The major hemicellulose, Xylan is digested with the help of combination other enzymes such as alpha-amylase, subtilisin, protease, and endo-1,3(4)-β-glucanase along with xylanase. Xylanase has a diverse applications such as pharmaceutical, food and feed, bakery, paper and pulp, textile, and bio-refinery industries. The objective of this review article is to compile microbial sources of this enzyme and its application for betterment of human kind. [ABSTRACT FROM AUTHOR]

Demand response (DR) is one of the most cost-effective and logical smart grid terms for power systems that can be used during peak load hours, whereas load shedding (LS) is the last and most expensive solution in emergency grid situations. The aim of them is to satisfy equilibrium constraints between consumption and generation and restore the power system frequency to normal bounds at the least possible time. The rapid increase in power grid costs and limitations on electricity generation resources have resulted in the increasing need for industrial customers' participation as an alternative solution to peak load spikes. Therefore, this paper considers the estimation of imbalance active power in a smart strategy to introduce a critical DR (CDR) in heavy industries (pulp and paper, cement, and medium density fibreboard (MDF)) based on direct load control (DLC) technique in order to reduce the need for LS in frequency restore. To evaluate the proposed model, a real case study including the typical pulp and paper, cement, and MDF industries processes with actual power consumption data is considered. The numerical and graphical results confirm that the proposed CDR can be used as an inexpensive solution to replace the costly spinning reserves and avoid load shedding. [ABSTRACT FROM AUTHOR]

In view of the problem that the transaction privacy in the current blockchain technology service is easy to be leaked, a bulletproof alliance chain technology service transaction privacy protection mechanism is proposed. Firstly, this paper uses digital certificates as access mechanisms and stores them on the chain to ensure that the identity of technical service transactions is trusted. Secondly, the transaction data of the technical service user is hidden in the Pedersen commitment, and the Bulletproof is used to build the scope proof. Enable the verifier to conduct confidential verification of the legitimacy of the transaction without obtaining the sensitive information of the transaction, so as to ensure that the user's transaction privacy is not disclosed. Finally, the security and privacy of the proposed privacy protection scheme are analyzed, and the comparison with other zero-knowledge proof schemes shows that the scheme has the advantages of strong privacy, scalability, and low storage cost. [ABSTRACT FROM AUTHOR]

With the wide application of lithium‐ion battery in various fields, the security and reliability of lithium‐ion battery have attracted great attention. Under the mode of continuous development of Internet of vehicles technology, vehicles will be connected with each other in the future, and the hackers will attack the energy system of the vehicle. However, health assessment of lithium‐ion battery can timely grasp the running state and health of the power battery system, so as to realize active defense against hacker security attacks. This paper proposes a health assessment method for lithium‐ion batteries using incremental capacity analysis and weighted Kalman filter algorithm. In view of the problem that ordinary Kalman filtering algorithm produces poor filtering results when the actual measurement noise error is large, this paper proposes a weighted Kalman filtering algorithm based on ordinary Kalman filtering. Incremental capacity analysis was performed on the charge and discharge data of lithium‐ion batteries, and health characteristics were extracted to construct a Gaussian nonlinear feature association mapping model for the health characteristics of lithium‐ion batteries. Combined with the battery SOH double‐exponential decay model, the weighted Kalman filter algorithm was used to evaluate the health of lithium‐ion batteries. Four lithium‐ion battery data sets provided by NASA were used to simulate and verify the health assessment method proposed in this paper. The verification results show that the health assessment method based on weighted Kalman filter proposed in this paper has better assessment accuracy than the common Kalman filter method with an average percentage error of 0.61%. The average percentage error of the assessment results for different types of batteries was less than 0.9%. The health assessment method has high accuracy and is suitable for different types of batteries. [ABSTRACT FROM AUTHOR]

Purpose. To provide a bibliographical-historical perspective and main interest in the field of myopia. Methods. In this bibliographic study, the Web of Science Database was searched from 1999 to 2018. Recorded parameters included journal name, impact factor, year and language, number of authors, type and origin, methodology, number of subjects, funding, and topics. Results. Epidemiological assessments were the leading type of article (28%), and half of the papers were prospective studies. The number of citations for multicenter studies was significantly higher (P = 0.034). The articles were published in 27 journals, with the majority in Investigative Ophthalmology, Vision Sciences (28%), and Ophthalmology (26%). Etiology, signs and symptoms, and treatment equally encompassed the topics. Papers addressing etiology, specifically genetic and environmental factors (P = 0.029), signs and symptoms (P = 0.001), and prevention, specifically public awareness (47%, P = 0.005), received significantly more citations. Treatment to decrease myopia progression was a much more common topic (68%) than refractive surgery (32%). Optical treatment was the most popular modality (39%). Half of the publications came from 3 countries: the United States (US), Australia, and Singapore. The highest ranked and cited papers came from the US (P = 0.028) and Singapore (P = 0.028). Conclusions. To our knowledge, this is the first report of the top-cited articles on myopia. There is a predominance of epidemiological assessments and multicenter studies originating from the US, Australia, and Singapore, assessing etiology, signs and symptoms, and prevention. These are more frequently cited, emphasizing the great interest in mapping the increase in the incidence of myopia in different countries, public health awareness, and myopia control. [ABSTRACT FROM AUTHOR]

In order to improve the effect of Chinese dance training, this paper combines digital feature recognition technology to correct and analyze Chinese dance training movements and constructs an intelligent auxiliary training system. In order to solve the travel time problem at the computationally complex interface and ensure its computational accuracy, a local adaptive triangulation technique is used in the fast-advance algorithm. Moreover, this paper designs the function of the system according to the user's needs, transforms the design concept into a figurative visual representation through the interactive prototype according to the function, carries out the visual design of the interface according to the interactive prototype, and uses the interactive technology to realize the development of the system. From the test analysis results, it can be seen that the Chinese dance training action correction system based on the digital feature recognition technology proposed in this paper has a good effect and can effectively promote the improvement of the Chinese dance training effect. [ABSTRACT FROM AUTHOR]

The rapid development of the intelligent equipment industry has promoted the emergence of a series of emerging industries, effectively improving the technical level of society and people's quality of life. Due to the inherent characteristics of smart devices, smart devices face serious privacy disclosure risks. Therefore, we have studied the security problem of the widely used smart device smart bracelet in this paper. We have adopted the attack method from easy to difficult to obtain the reading and writing instructions and timing characteristics of the intelligent devices to attack and steal private information. Specifically, we first attack through the strategy of log analysis; if this method is unable to obtain effective information, then we further acquire sensitive information on the basis of hook technology; and if the method on the basis of hook technology is still unable to obtain relevant information, then we will further use reverse engineering to conduct reverse analysis on the app to obtain sensitive information. Second, we develop a fake app on the basis of sensitive information and use it as a bridge to attack intelligent devices. In order to verify the effectiveness of the method, we successfully attacked and stole information from three popular business intelligence bracelets of different brands on the basis of the proposed method. The first step is to develop a fake app on the basis of the identified vulnerabilities. This app can bypass the protection measures of confusion and forced pairing and resetting to cheat the smart bracelet and can successfully enable or disable the jitters function remotely to modify the time and to obtain the sensitive data of the smart bracelet owner. In our attack process, we do not need the cooperation of the owner of the smart bracelet, nor do we need the target smart bracelet to match with our app. [ABSTRACT FROM AUTHOR]