Search

Purpose: This work introduces an integrated artificial intelligence schemes to enhance accurately predicting the mechanical properties of cellulosic fibers towards boosting their reliability for more sustainable industries. Design/methodology/approach: Fuzzy clustering and stacked method approach were utilized to predict the mechanical performance of the fibers. A reference dataset contains comprehensive information regarding mechanical behavior of the lignocellulosic fibers was compiled from previous experimental investigations on mechanical properties for eight different fiber materials. Data encompass three key factors: Density of 0.9–1.6 g/cm3, Diameter of 5.9–1,000 µm, and Microfibrillar angle of 2–49 deg were utilized. Initially, fuzzy clustering technique was utilized for the data. For validating proposed model, ultimate tensile strength and elongation at break were predicted and then examined against unseen new data that had not been used during model development. Findings: The output results demonstrated remarkably accurate and highly acceptable predictions results. The error analysis for the proposed method was discussed by using statistical criteria. The stacked model proved to be effective in significantly reducing level of uncertainty in predicting the mechanical properties, thereby enhancing model's reliability and precision. The study demonstrates the robustness and efficacy of the stacked method in accurately estimating mechanical properties of lignocellulosic fibers, making it a valuable tool for material scientists and engineers in various applications. Originality/value: Cellulosic fibers are essential for biomaterials to enhance developing green sustainable bio-products. However, such fibers have diverse characteristics according to their types, chemical composition and structure causing inconsistent mechanical performance. This work introduces an integrated artificial intelligence schemes to enhance accurately predicting the mechanical properties of cellulosic fibers towards boosting their reliability for more sustainable industries. Fuzzy clustering and stacked method approach were utilized to predict the mechanical performance of the fibers. [ABSTRACT FROM AUTHOR]

Purpose: In binder jetting, the interaction between the liquid binder droplets and the powder particles defines the shape of the printed primitives. The purpose of this study is to explore the interaction of the relative size of powder particles and binder droplets and the subsequent effects on macro-scale part properties. Design/methodology/approach: The effects of different particle size distribution (5–25 µm and 15–45 µm) of stainless steel 316 L powders and droplet sizes (10 and 30 pL) on part density, shrinkage, mechanical strength, pore morphology and distribution are investigated. Experimental samples were fabricated in two different layer thicknesses (50 and 100 µm). Findings: While 15–45 µm samples demonstrated higher green density (53.10 ± 0.25%) than 5–25 µm samples (50.31 ± 1.06%), higher sintered densities were achieved in 5–25 µm samples (70.60 ± 6.18%) compared to 15–45 µm samples (65.23 ± 3.24%). Samples of 5–25 µm also demonstrated superior ultimate tensile strength (94.66 ± 25.92 MPa) compared to 15–45 µm samples (39.34 ± 7.33 MPa). Droplet size effects were found to be negligible on both green and sintered densities; however, specimens printed with 10-pL droplets had higher ultimate tensile strength (79.70 ± 42.31 MPa) compared to those made from 30-pL droplets (54.29 ± 23.35 MPa). Originality/value: To the best of the authors' knowledge, this paper details the first report of the combined effects of different particle size distribution with different binder droplet sizes on the part macro-scale properties. The results can inform appropriate process parameters to achieve desired final part properties. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to determine the optimum parametric settings for yielding superior mechanical properties, namely, ultimate tensile strength (UTS), yield strength (YS) and percentage elongation (EL) of AZ91D/AgNPs/TiO2 hybrid composite fabricated by friction stir processing. Design/methodology/approach: An empirical model has been developed to govern crucial influencing parameters, namely, rotation speed (RS), tool transverse speed (TS), number of passes (NPS) and reinforcement fraction (RF) or weight percentage. Box Behnken design (BBD) with four input parameters and three levels of each parameter was used to design the experimental work, and analysis of variance (ANOVA) was used to check the acceptability of the developed model. Desirability function analysis (DFA) for a multiresponse optimization approach is integrated with response surface methodology (RSM). The individual desirability index (IDI) was calculated for each response, and a composite desirability index (CDI) was obtained. The optimal parametric settings were determined based on maximum CDI values. A confirmation test is also performed to compare the actual and predicted values of responses. Findings: The relationship between input parameters and output responses (UTS, YS, and EL) was investigated using the Box-Behnken design (BBD). Silver nanoparticles (AgNPs) and nano-sized titanium dioxide (TiO2) enhanced the ultimate tensile strength and yield strength. It was observed that the inclusion of AgNPs led to an increase in ductility, while the increase in the weight fraction of TiO2 resulted in a decrease in ductility. Practical implications: AZ91D/AgNPs/TiO2 hybrid composite finds enormous applications in biomedical implants, aerospace, sports and aerospace industries, especially where lightweight materials with high strength are critical. Originality/value: In terms of optimum value through desirability, the experimental trials yield the following results: maximum value of UTS (318.369 MPa), maximum value of YS (200.120 MPa) and EL (7.610) at 1,021 rpm of RS, 70 mm/min of TS, 4 NPS and level 3 of RF. [ABSTRACT FROM AUTHOR]

Purpose: In recent years, additive manufacturing (AM) has started to be used for manufacturing real functional parts and assemblies for critical applications in aerospace, automotive, and machinery industries. Most complex or assembled parts require internal features (IF) such as holes, channels, slots, or guides for locational and mating requirements. Therefore, it is critical to understand and compare the structural and mechanical properties of additively manufactured and conventionally machined IFs. Design/methodology/approach: In this study, mechanical and microstructural properties of Inconel 718 (Inc718) alloy internal features, manufactured either as-built with AM or machining of additively manufactured (AMed) part thereafter were investigated. Findings: The results showed that the average ultimate tensile strength (UTS) of additively manufactured center internal feature (AM-IF) is almost analogous to the machined internal feature (M-IF). However, the yield strength of M-IF is greater than that of AM-IF due the greater surface roughness of the internal feature in AM-IF, which is deemed to surpass the effect of microstructure on the mechanical performance. The results of digital image correlation (DIC) analysis suggest that AM-IF and M-IF conditions have similar strain values under the same stress levels but the specimens with as built IF have a more locally ductile region around their IF, which is confirmed by hardness test results. But this does not change global elongation behavior. The microstructural evolution starting from as-built (AB) and heat-treated (HT) samples to specimens with IF are examined. The microstructure of HT specimens has bimodal grain structure with d phase while the AB specimens display a very fine dendritic microstructure with the presence of carbides. Although they both have close values, machined specimens have a higher frequency of finer grains based on SEM images. Originality/value: It was shown that the concurrent creation of the IF during AM can provide a final part with a preserved ultimate tensile strength and elongation but a decreased yield strength. The variation in UTS of AM-IF increases due to the surface roughness near the internal feature as compared to smooth internal surfaces in M-IF. Hence, the outcomes of this study are believed to be valuable for the industry in terms of determining the appropriate production strategy of parts with IF using AM and postprocessing processes. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to investigate the effects of Ce and Sb doping on the microstructure and thermal mechanical properties of Sn-1.0Ag-0.5Cu lead-free solder. The effects of 0.5%Sb and 0.07%Ce doping on microstructure, thermal properties and mechanical properties of Sn-1.0Ag-0.5Cu lead-free solder were investigated. Design/methodology/approach: According to the mass ratio, the solder alloys were prepared from tin ingot, antimony ingot, silver ingot and copper ingot with purity of 99.99% at 400°C. X-ray diffractometer was adopted for phase analysis of the alloys. Optical microscopy, scanning electron microscopy and energy dispersive spectrometer were used to study the effect of the Sb and Ce doping on the microstructure of the solder. Then, the thermal characteristics of alloys were characterized by a differential scanning calorimeter (DSC). Finally, the ultimate tensile strength (UTS), elongation (EL.%) and yield strength (YS) of solder alloys were measured by tensile testing machine. Findings: With the addition of Sb and Ce, the ß-Sn and intermetallic compounds of solders were refined and distributed more evenly. With the addition of Sb, the UTS, EL.% and YS of Sn-1.0Ag-0.5Cu increased by 15.3%, 46.8% and 16.5%, respectively. The EL.% of Sn-1.0Ag-0.5Cu increased by 56.5% due to Ce doping. When both Sb and Ce elements are added, the EL.% of Sn-1.0Ag-0.5Cu increased by 93.3%. Originality/value: The addition of 0.5% Sb and 0.07% Ce can obtain better comprehensive performance, which provides a helpful reference for the development of Sn-Ag-Cu lead-free solder. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to investigate the resultant optimal ultimate tensile strength, elongation, flexural strength and modulus, compression strength and impact strength of fabricated alkali-treated Lagenaria siceraria fiber (LSF)-reinforced polymer matrix composite by optimizing input factors and microstructural characterization by influencing fiber length, fiber concentration and treatment condition of LSF. Design/methodology/approach: The fabrication of LSF-reinforced composite specimens involved surface treatment followed by custom experimental design using a simple hand layup process. The wear analysis was performed by a multi-tribotester TR25 machine, and the developed model was validated by using statistical software Design Expert V.8 and analysis of variance (ANOVA). The surface morphology of the sample was also analyzed by field emission scanning electron microscopy. Findings: The alkali treatment for LSFs had reduced the hemicellulose, and enhanced mechanical performance was observed for 30 wt.% concentration of L. siceraria in epoxy resin. Thermogravimetric analysis revealed thermal stability up to 245°C; microstructure revealed fiber entanglements in case of longer fiber length and compression strength reduction; and the surface-treated fiber composites exhibited reduced occurrences of defects and enhanced matrix–fiber bonding. Enhanced mechanical performances were observed, namely, ultimate tensile strength of 17.072 MPa, elongation of 1.847%, flexural strength of 50.4 MPa, flexural modulus of 3,376.31 GPa, compression strength of 52.154 MPa and impact strength of 0.53 joules. Originality/value: The novel approach of optimizing and characterizing alkali surface-treated LSF-reinforced epoxy matrix composite was explored, varying fiber length and concentrations for specimens by empirical relations and experimental design to obtain optimal performance validated by ANOVA. Enhanced properties were obtained for: 7 mm fiber length and 30 wt.% concentration of fiber in the composite for alkali-treated fiber. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to evaluate the potential of using the in-nozzle impregnation approach to reuse recycled PET (RPET) to develop continuous banana fiber (CBF) reinforced bio-composites. The mechanical properties and fracture morphology behavior are evaluated to establish the relationships between layer spacing–microstructural characteristics–mechanical properties of CBF/RPET composite. Design/methodology/approach: This study uses RPET filament developed from post-consumer PET bottles and CBF extracted from agricultural waste banana sap. RPET serves as the matrix material, while CBF acts as the reinforcement. The test specimens were fabricated using a customized fused deposition modeling 3D printer. In this process, customized 3D printer heads were used, which have a unique capability to extrude and deposit print fibers consisting of a CBF core coated with an RPET matrix. The tensile and flexural samples were 3D printed at varying layer spacing. Findings: The Young's modulus (E), yield strength (sy) and ultimate tensile strength of the CBF/RPET sample fabricated with 0.7 mm layer spacing are 1.9 times, 1.25 times and 1.8 times greater than neat RPET, respectively. Similarly, the flexural test results showed that the flexural strength of the CBF/RPET sample fabricated at 0.6 mm layer spacing was 47.52 ± 2.00 MPa, which was far greater than the flexural strength of the neat RPET sample (25.12 ± 1.94 MPa). Social implications: This study holds significant social implications highlighting the growing environmental sustainability and plastic waste recycling concerns. The use of recycled PET material to develop 3D-printed sustainable structures may reduce resource consumption and encourages responsible production practices. Originality/value: The key innovation lies in the concept of in-nozzle impregnation approach, where RPET is reinforced with CBF to develop a sustainable composite structure. CBF reinforcement has made RPET a superior, sustainable, environmentally friendly material that can reduce the reliance on virgin plastic material for 3D printing. [ABSTRACT FROM AUTHOR]

Purpose: Wire-arc-based additive manufacturing (WAAM) is a promising technology for the efficient and economical fabrication of medium-large components. However, the anisotropic behavior of the multilayered WAAM-fabricated components remains a challenging problem. Design/methodology/approach: The purpose of this paper is to conduct a comprehensive study of the grain morphology, crystallographic orientation and texture in three regions of the WAAM printed component. Furthermore, the interdependence of the grain morphology in different regions of the fabricated component with their mechanical and tribological properties was established. Findings: The electron back-scattered diffraction analysis of the top and bottom regions revealed fine recrystallized grains, whereas the middle regions acquired columnar grains with an average size of approximately 8.980 µm. The analysis revealed a higher misorientation angle and an intense crystallographic texture in the upper and lower regions. The investigations found a higher microhardness value of 168.93 ± 1.71 HV with superior wear resistance in the bottom region. The quantitative evaluation of the residual stress detected higher compressive stress in the upper regions. Evidence for comparable ultimate tensile strength and greater elongation (%) compared to its wrought counterpart has been observed. Originality/value: The study found a good correlation between the grain morphology in different regions of the WAAM-fabricated component and their mechanical and wear properties. The Hall–Petch relationship also established good agreement between the grain morphology and tensile test results. Improved ductility compared to its wrought counterpart was observed. The anisotropy exists with improved mechanical properties along the longitudinal direction. Moreover, cylindrical components have superior tribological properties compared with cuboidal components. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to present an experimental approach to develop a high-strength 3D-printed recycled polymer composite reinforced with continuous metal fiber. Design/methodology/approach: The continuous metal fiber composite was 3D printed using recycled and virgin acrylonitrile butadiene styrene-blended filament (RABS-B) in the ratio of 60:40 and postused continuous brass wire (CBW). The 3D printing was done using an in-nozzle impregnation technique using an FFF printer installed with a self-modified nozzle. The tensile and single-edge notch bend (SENB) test samples are fabricated to evaluate the tensile and fracture toughness properties compared with VABS and RABS-B samples. Findings: The tensile and SENB tests revealed that RABS-B/CBW composite 3D printed with 0.7 mm layer spacing exhibited a notable improvement in Young's modulus, ultimate tensile strength, elongation at maximum load and fracture toughness by 51.47%, 18.67% and 107.3% and 22.75% compared to VABS, respectively. Social implications: This novel approach of integrating CBW with recycled thermoplastic represents a significant leap forward in material science, delivering superior strength and unlocking the potential for advanced, sustainable composites in demanding engineering fields. Originality/value: Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials. [ABSTRACT FROM AUTHOR]

Purpose: The aerospace, energy and automotive industries have seen wide use of composite materials because of their excellent mechanical properties, along with the benefit of weight reduction savings. As such, the purpose of this study is to provide an understanding of the mechanical performance of these materials under extreme operational conditions characteristic of in-service environments. Design/methodology/approach: This study is novel in that it has evaluated the tensile performance and fracture response of additively manufactured continuous carbon fiber embedded in an onyx matrix (i.e. nylon with chopped carbon fiber) at cryogenic and room temperatures, for specimens manufactured with an angle between the specimen lying plane and the working build plane of 0°, 45° and 90°. Findings: Research findings reveal enhanced tensile properties (i.e. ultimate tensile strength and modulus of elasticity) by the 0° (X) built specimens, as compared with the 45° (XZ45) and 90° (Z) built specimens at cryogenic temperature. A reduction in ductility is observed at cryogenic temperature for all build orientations. Fractographic analysis reveals the presence of fiber pullout/elongation, pores within the onyx matrix and chopped carbon fiber near fracture zone of the onyx matrix. Research limitations/implications: Research findings present tensile properties (i.e. ultimate tensile strength, modulus of elasticity and elongation%) for three-dimensional (3D)-printed onyx with and without reinforcing continuous carbon fiber composites at cryogenic and room temperatures. Reinforcement of continuous carbon fibers and reduction to cryogenic temperatures appears to result, in general, in an increase in the tensile strength and modulus of elasticity, with a reduction in elongation% as compared with the onyx matrix tensile performance reported at room temperature. Fracture analysis reveals continuous carbon fiber pull out for onyx–carbon fiber samples tested at room temperature and cryogenic temperatures, suggesting weak onyx matrix–continuous carbon fiber adhesion. Originality/value: To the best of the authors' knowledge, this study is the first study to report on the cryogenic tensile properties and fracture response exhibited by 3D-printed onyx–continuous carbon fiber composites. Evaluating the viability of common commercial 3D printing techniques in producing composite parts to withstand cryogenic temperatures is of critical import, for aerospace applications. [ABSTRACT FROM AUTHOR]

Purpose: An experimental investigation for developing structure-property correlations of hot-rolled E410 steels with different carbon contents, i.e. 0.04wt.%C and 0.17wt.%C metal active gas (MAG) and cold metal transfer (CMT)-MAG weldments was undertaken. Design/methodology/approach: Mechanical properties and microstructure of MAG and CMT-MAG weldments of two E410 steels with varying content of carbon were compared using standardized mechanical testing procedures, and conventional microscopy. Findings: 0.04wt.%C steel had strained ferritic and cementite sub-structures in blocky shape and large dislocation density, while 0.17wt.%C steel consisted of pearlite and polygonal ductile ferrite. This effected yield strength (YS), and microhardness being larger in 0.04wt.%C steel, %elongation being larger in 0.17wt.%C steel. Weldments of both E410 steels obtained with CMT-MAG performed better than MAG in terms of YS, ultimate tensile strength (UTS), %elongation, and toughness. It was due to low heat input of CMT-MAG that resulted in refinement of weld metal, and subzones of heat affected zone (HAZ). Originality/value: A substantial improvement in YS (∼9%), %elongation (∼38%), and room temperature impact toughness (∼29%) of 0.04wt.%C E410 steel is achieved with CMT-MAG over MAG welding. Almost ∼10, ∼12.5, and ∼16% increment in YS, %elongation, and toughness of 0.17wt.%C E410 steel is observed with CMT-MAG. Relatively low heat input of CMT-MAG leads to development of fine Widmanstätten and acicular ferrite in weld metal and microstructural refinement in HAZ subzones with nearly similar characteristics of base metal. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to investigate the effect of nano ZrC particles on the mechanical and electrochemical corrosion properties of FeCrAl alloys, providing a beneficial reference basis for the development of high-performance carbide reinforced FeCrAl alloys with good mechanical and corrosion properties in the future. Design/methodology/approach: Nano ZrC reinforced FeCrAl alloys were prepared by mechanical alloying and spark plasma sintering. Phases composition, tensile fractography, corrosion morphology and chemical composition of nano ZrC reinforced FeCrAl alloys were analyzed by X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy, respectively. Microhardness and tensile properties of nano ZrC reinforced FeCrAl alloys were investigated by mechanical testing machine and Vickers hardness tester. Electrochemical corrosion properties of nano ZrC reinforced FeCrAl alloys were investigated by electrochemical workstation in 3.5 wt.% NaCl solution. Findings: The results showed that addition of nano ZrC can effectively improve the mechanical and corrosion properties. However, excessive nano ZrC could decrease the mechanical properties and reduce the corrosion resistance. In all the FeCrAl alloys, FeCrAl–0.6 wt.% ZrC alloy exhibits the optimum mechanical properties with an ultimate tensile strength, elongation and hardness of 990.7 MPa, 24.1% and 335.8 HV1, respectively, and FeCrAl–0.2 wt.% ZrC alloy has a lower corrosion potential (−0.179 V) and corrosion current density (2.099 µA/cm2) and larger pitting potential (0.497 V) than other FeCrAl–ZrC alloys, showing a better corrosion resistance. Originality/value: Adding proper nano ZrC particles can effectively improve the mechanical and corrosion properties, while the excessive nano ZrC is harmful to the mechanical and corrosion properties of FeCrAl alloys, which provides an instruction to develop high-performance FeCrAl cladding materials. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this research is present an experimental and numerical study of the mechanical properties of the acrylonitrile butadiene styrene (ABS) in the additive manufacturing (AM) by fused filament fabrication (FFF). The characterization and mechanical models obtained are used to predict the elastic behavior of a prosthetic foot and the failure of a prosthetic knee manufactured with FFF. Design/methodology/approach: Tension tests were carried out and the elastic modulus, yield stress and tensile strength were evaluated for different material directions. The material elastic constants were determined and the influence of infill density in the mechanical strength was evaluated. Yield surfaces and failure criteria were generated from the tests. Failures over prosthetic elements in tridimensional stresses were analyzed; the cases were evaluated via finite element method. Findings: The experimental results show that the material is transversely isotropic. The elasticity modulus, yield stress and ultimate tensile strength vary linearly with the infill density. The stresses and the failure criteria were computed and compared with the experimental tests with good agreement. Practical implications: This research can be applied to predict failures and improve reliability in FFF or fused deposition modeling (FDM) products for applications in high-performance industries such as aerospace, automotive and medical. Social implications: This research aims to promote its widespread adoption in the industrial and medical sectors by increasing reliability in products manufactured with AM based on the failure criterion. Originality/value: Most of the models studied apply to plane stress situations and standardized specimens of printed material. However, the models applied in this study can be used for functional parts and three-dimensional stress, with accuracy in the range of that obtained by other researchers. The researchers also proposed a method for the mechanical study of fragile materials fabricated by processes of FFF and FDM. [ABSTRACT FROM AUTHOR]

Purpose: Dissimilar joining of austenitic stainless steels and ferritic steels is a challenging task and has a wide range of applications due to its excellent mechanical and thermal characteristics. They are joined mostly by using conventional modes. In the current investigation, the study and optimization of hot wire TIG welding parameters was carried out. Design/methodology/approach: These parameters will govern the desired characteristics of the joint. Solutions were found out through multi-response optimization by using response surface methodology and single response optimization using particle swarm optimization. Findings: Optimized input welding parameters that were achieved are electrode current 180 amps, wire feed rate 1870 mm/min and hot wire current 98 amps and the optimized UTS is 665.45 MPa. The results from PSO were compared with RSM and the optimized input welding parameters for the electrode current, hot wire current and wire feed rate exhibited maximum ultimate tensile strength which were also confirmed from response and contour plots. Originality/value: Sensitivity analysis was also performed to understand the effect of each individual parameters on the response. Microstructure features were evaluated for the joints and was found that the characteristics are within the desired criteria. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to design and develop an environmentally controlled enclosure for commercial three-dimensional (3D) printers. Design/methodology/approach: Computational fluid dynamics (CFD) simulations and experimental testing investigated various designs for environmentally controlled enclosures. CFD simulations provided the necessary information to select the optimal and feasible design, whereas experimental testing validated the CFD simulation results. An environmentally controlled environment allowed test samples to be printed at several relative humidity (RH) settings (20% RH, 50% RH and 80% RH). The test samples were characterized at both the macro and micro scales. The macroscale characterization was conducted using the static tensile testing procedure, while the microscale polymer material properties were determined using atomic force microscopy. Findings: An environmentally controlled enclosure was designed and built to produce airflow in the print region with an average RH uniformity of over 0.70. Three batches of ASTM D638 standard test samples were printed at 20% RH (low RH), 50% RH (mid RH) and 80% RH (high RH). Macroscale characterization showed that the samples printed at lower humidity had statistically significantly higher tangent modulus, ultimate tensile strength and rupture strength. atomic force microscopy studies have also verified these results at the microscale and nanoscale. These studies also showed that a high humidity environment interacts with melted polylactic acid, causing additional surface roughness that reduces the strength of 3D-printed parts. Originality/value: There is a need for stronger and higher-quality 3D-printed parts in the additive manufacturing (AM) market. This study fulfills that need by designing and developing an environmentally controlled add-on enclosure for the AM market. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this research paper is to investigate and model the fused deposition modelling (FDM) process to predict the mechanical attributes of 3D printed specimens. Design/methodology/approach: By exploiting the main effect plots, a Taguchi L18 orthogonal array is used to investigate the effects of such parameters on three mechanical attributes of the 3D printed specimens. A radial-based integrated network is then developed to map the eight FDM parameters to the three mechanical attributes for both PEEK and PEKK. Such an integrated network maps and predicts the mechanical attributes through two consecutive phases that consist of several radial basis functions (RBFs). Findings: Validated on a set of further experiments, the integrated network was successful in predicting the mechanical attributes of the 3D printed specimens. It also outperformed the well-known RBF network with an overall improvement of 24% in the coefficient of determination. The integrated network is also further validated by predicting the mechanical attributes of a medical-surgical implant (i.e. the MidFace Rim) as an application. Originality/value: The main aim of this paper is to accurately predict the mechanical properties of parts produced using the FDM process. Such an aim requires modelling a highly dimensional space to represent highly nonlinear relationships. Therefore, a radial-based integrated network based on the combination of composition and superposition of radial functions is developed to model FDM using a limited number of data points. [ABSTRACT FROM AUTHOR]

Purpose: Multimaterial components possess material boundaries that introduce potential points of failure. Graded material transitions can help mitigate the impact of these abrupt property changes. This approach is becoming increasingly accessible through three-dimensional (3D) printing, but it has yet to be extensively studied for rapid prototyping processes that are limited in resolution or number of material types. This study aims to investigate methods for applying graded transitions when using manufacturing processes with these limitations. Design/methodology/approach: This study introduces a series of transition types that have graded properties and are produced using a finite number of discrete materials. This study presents a workflow for generating, fabricating and testing these transition types. This study uses this workflow with two different manufacturing processes to characterize the impact of each transition type on the ultimate tensile strength of a component. Findings: Graded transitions can improve the performance of a component if the proper transition type is used. For high-fidelity processes, the best performing transitions are those closest to a true gradient. For low-fidelity processes, the best performing transitions are those which provide a balance of graded properties and mechanical connection. Research limitations/implications: The presented performance trends are specific to the studied processes and materials. Future work using different fabrication parameters can use the presented workflow to assess process-specific trends. Originality/value: This work comprehensively compares different methods of creating graded transitions using discrete materials, including several novel approaches. It also provides a new design workflow that allows the design of graded transitions to be easily integrated into a 3D printing workflow. [ABSTRACT FROM AUTHOR]

Purpose: Currently on additive manufacturing, extensive research is directed toward mitigating the main challenges associated with multi-material in fused filament fabrication which has a weak bonding strength between dissimilar materials. Low interfacial bonding strength leads to defects, anisotropy and temperature gradient in materials which negatively impact the mechanical performance of the multi-material prints. The purpose of this study was to assess the performance of different interface geometry designs in terms of the mechanical properties of the specimens. Design/methodology/approach: Tensile test specimens were printed using: mono-material without a boundary interface, mono-material with the interface geometries (Face-to-face; U-shape; T-shape; Dovetail; Encapsulation; Mechanical interlocking; and Overlap) and multi-material with the interface geometries. The materials chosen with high and low compatibility were Tough polylactic acid (PLA) and TPU. Findings: The main results of this study indicate that the interface geometries with the mechanical constriction between materials provide better structural integrity to the specimens. Moreover, in the case of the mono-material parts, the most effective interface design was the mechanical interlocking for both Tough PLA and TPU. On the other hand, in the case of multi-material specimens, the encapsulation showed the highest ultimate tensile strength, whereas the overlap and T-shape presented more robust bonding. Originality/value: This study examines the mechanical performance, particularly tensile strength, strain at break, Young's modulus and yield strength of different interface designs which were not studied in the previous studies. [ABSTRACT FROM AUTHOR]

Purpose: This research outlines the development and characterization of advanced composite materials and their potential applications in the aerospace industry for interior applications. Advanced composites, such as carbon-fiber-reinforced polymers and ceramic matrix composites, offer significant advantages over traditional metallic materials in terms of weight reduction, stiffness and strength. These materials have been used in various aerospace applications, including aircraft, engines and thermal protection systems. Design/methodology/approach: The development of design of experiment–based hybrid aluminum composites using the stir-casting technique has further enhanced the performance and cost-effectiveness of these materials. The design of the experiment was followed to fabricate hybrid composites with nano cerium oxide (nCeO2) and graphene nanoplatelets (GNPs) as reinforcements in the Al-6061 matrix. Findings: The Al6061 + 3% nCeO2 + 3% GNPs exhibited a high hardness of 119.6 VHN. The ultimate tensile strength and yield strength are 113.666 MPa and 73.08 MPa, respectively. A uniform distribution of reinforcement particulates was achieved with 3 Wt.% of each reinforcement in the matrix material, which is analyzed using scanning electron microscopy. Fractography revealed that brittle and ductile fractures caused the failure of the fractured specimens in the tensile test. Practical implications: The manufactured aluminum composite can be applied in a range of exterior and interior structural parts like wings, wing boxes, motors, gears, engines, antennas, floor beams, etc. The fan case material of the GEnx engine (currently using carbon-fiber reinforcement plastic) for the Boeing 7E7 can be another replacement with manufactured hybrid aluminum composite, which predicts weight savings per engine of close to 120 kg. Originality/value: The development of hybrid reinforcements, where two or more types of reinforcements are used in combination, is also a novel approach to improving the properties of these composites. Advanced composite materials are known for their high strength-to-weight ratio. If the newly developed composite material demonstrates superior properties, it can potentially be used to replace traditional materials in aircraft manufacturing. By reducing the weight of aircraft structures, fuel efficiency can be improved, leading to reduced operating costs and environmental impact. This allows for a more customized solution for specific application requirements and can lead to further advancements in materials science and technology. [ABSTRACT FROM AUTHOR]

Purpose: Fused filament fabrication (FFF) is a type of additive manufacturing (AM) based on materials extrusion. It is the most widely practiced AM route, especially used for polymer-based rapid prototyping and customized product fabrication in relation to aerospace, automotive, architecture, consumer goods and medical applications. During FFF, part quality (surface finish, dimensional accuracy and static mechanical strength) is greatly influenced by several process parameters. The paper aims to study FFF parametric influence on aforesaid part quality aspects. In addition, dynamic analysis of the FFF part is carried out. Design/methodology/approach: Interpretive structural modelling is attempted to articulate interrelationships that exist amongst FFF parameters. Next, a few specimens are fabricated using acrylonitrile butadiene styrene plastic at varied build orientation and build style. Effects of build orientation and build style on part's ultimate tensile strength, flexure strength along with width build time are studied. Prototype beams (of different thickness) are fabricated by varying build style. Instrumental impact hammer Modal analysis is performed on the cantilever beams (cantilever support) to obtain the natural frequencies (first mode). Parametric influence on natural frequencies is also studied. Findings: Static mechanical properties (tensile and flexure strength) are greatly influenced by build style and build orientation. Natural frequency (NF) of prototype beams is highly influenced by the build style and beam thickness. Originality/value: FFF built parts when subjected to application, may have to face a variety of external dynamic loads. If frequency of induced vibration (due to external force) matches with NF of the component part, resonance is incurred. To avoid occurrence of resonance, operational frequency (frequency of externally applied forces) must be lower/ higher than the NF. Because NF depends on mass and stiffness, and boundary conditions, FFF parts produced through varying build style may definitely correspond to varied NF. This aspect is explained in this work. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to investigate the variables of the fused deposition modelling (FDM) process and improve their effect on the mechanical properties of acrylonitrile butadiene styrene (ABS) components reinforced with copper microparticles. Design/methodology/approach: In the experimental approach, after drying the ABS granule, it was mixed with copper microparticles (at concentrations of 5%, 8% and 10%) in a single screw extruder to fabricate pure ABS and composite filaments. Then, by making the components by the FDM process, the tensile strength of the parts was determined through tensile strength tests. Taguchi DOE method was used to design the experiments in which nozzle temperature, filling pattern and layer thickness were the design variables. The analysis of variance (ANOVA) and signal-to-noise analysis were conducted to determine the effectiveness of each FDM process parameter on the ultimate tensile strength of printed samples. Following that, the main effect analysis was used to optimize each process parameter for pure ABS and its composite at different copper contents. Findings: The study allows the layer thickness and filling pattern had the highest effects on the ultimate tensile strength of the printed materials (pure and composite) in the FDM process. Moreover, the results show that the ultimate tensile strength of the ABS composite containing 5% copper was nearly 12.3% higher than the pure ABS part. According to validation tests, the maximum error of experiments was about 0.96%. Originality/value: In this paper, the effect of copper microparticles (as filling agent) was investigated on the ultimate tensile strength of printed ABS material during the FDM process. [ABSTRACT FROM AUTHOR]

Purpose: Regardless of the materials used, additive manufacturing (AM) is one of the most popular emerging fabrication processes used for creating complex and intricate structural components. This study aims to investigate the effects of process parameters – namely, nozzle diameter, layer thickness and infill density on microstructure as well as the mechanical properties of 17–4 PH stainless steel specimens fabricated via material extrusion AM. Design/methodology/approach: The experimental approach investigates the effects of printing parameters, including nozzle diameter, layer thickness and infill density, on surface roughness, physical and mechanical properties of the printed specimens. The tests were triplicated to ensure reproducibility of the experimental results. Findings: The highest ultimate tensile strength, 795.26 MPa, was obtained on specimen that was fabricated with a 0.4 mm nozzle diameter, 0.14 mm layer thickness and 30% infill density. Furthermore, a 0.4 mm nozzle diameter also provided slightly better ductility. This came at the expense of surface finishing, as a 0.25 mm nozzle diameter exhibited better surface finishing over a 0.4 mm nozzle diameter. Infill density was shown to slightly influence the tensile properties, whereas layer thickness showed a significant effect on surface roughness. By contrast, hardness and ductility were independent of nozzle diameter, layer thickness and infill density. Originality/value: This paper presents a comprehensive analysis relating to various input printing parameters on microstructural, physical and mechanical properties of additively manufactured 17–4 PH stainless steel to improve the printability and processability via AM. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to study the microstructure and properties of Sn-3.5Ag and Sn-3.5Ag-0.5Sb lead-free solder alloys with and without a rotating magnetic field (RMF). Design/methodology/approach: Optical microscopy, scanning electron microscopy and X-ray diffraction were used to analyze the effect of an RMF on the microstructure of the solders. Differential scanning calorimetry was used to study the influence of the RMF on the thermal characteristics of the solders. The mechanical properties of the alloys were determined by tensile measurements at different strain rates. Findings: The ß-Sn grains and intermetallic compounds for the Sn-3.5Ag and Sn-3.5Ag-0.5Sb lead-free solder alloys were refined under an RMF, and the morphology of the ß-Sn grains changed from dendritic to equiaxed. The pasty range was significantly reduced under an RMF. The ultimate tensile strength (UTS) of Sn-3.5Ag improved under the RMF, whereas the UTS of Sn-3.5Ag-0.5Sb decreased slightly. The addition of Sb to the Sn-3.5Ag alloy significantly enhanced the UTS and elongation (El.%) of the samples. The UTS of the solder increased with increasing strain rate. Originality/value: The results revealed that the application of RMF in the molten alloy had a significant effect on its microstructure and mechanical properties. The thermal characteristics of the Sn-3.5Ag and Sn-3.5Ag-0.5Sb solder alloys were improved under the RMF. This research is expected to fill a knowledge gap regarding the behaviour of Sn-Ag solder alloys under RMF. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to analyze the effect of printing parameters on the mechanical properties of standard dog bone specimens manufactured by fused deposition modeling. Design/methodology/approach: Polylactic acid (PLA) specimens were printed and tested according to the ASTM standard. The effect of five important printing parameters, layer height, raster angle, printing speed, nozzle temperature and nozzle diameter, was examined on ultimate tensile strength (UTS), elongation and apparent density. Five levels were attended for each parameter, and a high number of required experiments were reduced by applying the L25 Taguchi design of the experiment. Findings: The effect of each parameter on outputs and optimal values for maximum tensile strength were determined. The most influential parameter is the raster angle of 64.96%. Nozzle temperature has a low effect of 1.76%, but nozzle diameter contribution is 9.77%. The experiment results are validated by analysis of variance analysis, and the optimal predicted level for parameters is 90° raster angle, 0.2 mm layer height, 100 mm/s printing speed, 200°C nozzle temperature and 0.8 mm nozzle diameter. The maximum UTS observed is 48.70 MPa for 0.8 mm nozzle diameter, whereas the minimum is 18.49 for 0.2 mm nozzle diameter. Originality/value: This paper is a very extensive experimental research report on the effect of the parameters for the tensile property of 3D printed PLA specimens by the Taguchi method. The documented results can be further developed for an optimization model to obtain a desired mechanical property with less variation and uncertainty in a product. [ABSTRACT FROM AUTHOR]

Purpose: Wire and arc additive manufacturing (WAAM) technology-based cold metal transfer (CMT) to produce large aluminum alloy parts has become more and more popular. In WAAM, wire is the only raw material. The purpose of this paper is to study the effect of wire composition on the microstructure and properties of the ZAlCu5MnCdVA alloy deposited by WAAM. Design/methodology/approach: Two thin-walled ZAlCu5MnCdVA alloys with different wire compositions were prepared by WAAM. The copper contents were 4.7% (Al-4.7Cu) and 5.0% (Al-5.0Cu), respectively. The microstructure, element distribution and evolution of precipitated phases of the two samples were characterized and analyzed by optical microscopy, scanning electron microscopy and transmission electron microscopy. Hardness and tensile properties of samples were tested, and strengthening mechanism was analyzed in detail. Findings: The results show that grain sizes of Al-4.7Cu and Al-5.0Cu are less than 40 μm. The average mass fraction of Cu in Al matrix and the number of nanometer scale θ'' and θ' phases are the main factors affecting the tensile properties of Al-Cu alloy. Tensile properties of two materials show different characteristics at room temperature and high temperature. Al-5.0Cu is better at room temperature and Al-4.7Cu is better at high temperature. The yield strength (YS), ultimate tensile strength (UTS) and elongation in the x direction of Al-5.0Cu at room temperature are 451 ± 10.2 MPa, 486 ± 10.2 MPa and 9 ± 0.5%, respectively. The YS, UTS and elongation in the x direction of Al-4.7Cu at high temperature are 290 ± 4.5 MPa, 356 ± 7.0 MPa and 13% ± 0.2%, respectively. Originality/value: Experiments show that the increase of Cu element can improve the properties at room temperature of the ZAlCu5MnCdVA alloy by WAAM, but its properties at high temperature decrease. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to investigate the effect of the wall thickness, deposition orientation and two different post-processing methods on the local mechanical properties and microstructure of additively manufactured parts made of maraging steel. In order to examine the local properties of the build, miniaturized testing specimens were employed. Before application of small-sized specimens, their performance was verified. Design/methodology/approach: The investigation was composed of two stages. As first, the part thickness, specimen size and orientation were studied on a laser-powder bed fusion (L-PBF) platform with deposited walls of various thicknesses made of maraging steel. Subsequently, the influence of different heat-treatment methods was investigated on the final product, i.e. impellers. The miniaturized and standard tensile tests were performed to investigate the local mechanical properties. The porosity, microstructures and fracture surfaces were analysed by X-ray-computed tomography, X-ray diffraction and scanning electron microscopy with electron backscatter diffraction. Findings: The results revealed good agreement between the values provided by miniaturized and standard specimens. The thinnest parts produced had the largest pores and the highest scatter of elongation values. In these cases, also the sub-contour porosity was observed. Part thickness affected pores' size and results repeatability but not total porosity. The two-step heat-treatment (solutionizing and age-hardening) exhibited the highest yield and ultimate tensile strength. Practical implications: The microstructure and local mechanical properties were studied on L-PBF platform with deposited walls of various thicknesses. Subsequently, a detailed analysis was conducted on real components (impellers) made of maraging steel, commonly used in tooling, automotive and aerospace industries. Originality/value: The broadly understood quality of manufactured parts is crucial for their reliable and long-lasting operation. The findings presented in the manuscript allow the readers better understanding of the connection between deposition parameters, post-processing, microstructure and mechanical performance of additive manufacturing-processed parts. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to review recent reports on mechanical properties of Sn-Bi and Sn-Bi-X solders (where X is an additional alloying element), in terms of the tensile properties, hardness and shear strength. Then, the effects of alloying in Sn-Bi solder are compared in terms of the discussed mechanical properties. The fracture morphologies of tensile shear tested solders are also reviewed to correlate the microstructural changes with mechanical properties of Sn-Bi-X solder alloys. Design/methodology/approach: A brief introduction on Sn-Bi solder and reasons to enhance the mechanical properties of Sn-Bi solder. The latest reports on Sn-Bi and Sn-Bi-X solders are combined in the form of tables and figures for each section. The presented data are discussed by comparing the testing method, technical setup, specimen dimension and alloying element weight percentage, which affect the mechanical properties of Sn-Bi solder. Findings: The addition of alloying elements could enhance the tensile properties, hardness and/or shear strength of Sn-Bi solder for low-temperature solder application. Different weight percentage alloying elements affect differently on Sn-Bi solder mechanical properties. Originality/value: This paper provides a compilation of latest report on tensile properties, hardness, shear strength and deformation of Sn-Bi and Sn-Bi-X solders and the latest trends and in-depth understanding of the effect of alloying elements in Sn-Bi solder mechanical properties. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to investigate and model interrelationships between process parameters, geometrical profile characteristics and mechanical properties of industrially extruded aluminum alloys. Design/methodology/approach: Statistical design of experiments (DOE) was applied to investigate and model the effects of eight factors including extrusion ratio, stem speed, billet-preheat temperature, number of die cavities, quenching media (water/air), time and temperature of artificial aging treatment and profile nominal thickness on four mechanical properties (yield strength, ultimate tensile strength, percent elongation and hardness). Experiments were carried out at an actual extrusion plant using 8-in. diameter billets on an extrusion press with 2,200 ton capacity. Findings: Main factors and factor interactions controlling mechanical properties were identified and discussed qualitatively. Quantitative models with high prediction accuracy (in excess of 95%) were also obtained and discussed. Practical implications: The obtained results are believed to be of great importance to researchers and industrial practitioners in the aluminum extrusion industry. Originality/value: All practical and relevant parameters have been used to model all important mechanical properties in a collective manner in one study and within actual industrial setup. This is in contrast to all previous studies where either a partial set of parameters and/or mechanical properties are discussed and mostly under limited laboratory setup. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to supplement and upgrade existing research on LPBF of NiTi alloys. Laser powder bed fusion (LPBF) is a promising method for fabricating nickel–titanium (Ni–Ti) alloys. It is well known that the energy density is mainly adjusted through the scanning speed and laser power. Nevertheless, there is lack in research on the effects of separately adjusting the scanning speed and laser power on the properties of the final Ni–Ti components. On the other hand, although Ni-rich Ni–Ti alloys [such as Ni54(at.%)Ti] have great potential in structural applications because of their high hardness and good shape stability, at present, there are few studies focusing on this grade of Ni–Ti alloy. Design/methodology/approach: In this work, the energy density was adjusted by changing the laser power and scanning speed separately, and the corresponding process parameters were used to fabricate Ni54(at.%)Ti alloys. The formability (including the relative density, impurity content, etc.) and tensile properties of the LPBF Ni54(at.%)Ti alloys fabricated with different combinations of process parameters were analyzed. Findings: The effects of increasing the laser power and reducing the scanning speed on the properties of the LPBF Ni54(at.%)Ti alloys and the property differences between components manufactured with different combinations of laser power and scanning speed under the same energy density were analyzed. The optimal process parameters were selected to fabricate the components that achieved the highest ultimate tensile strength of 537 MPa, a high relative density of 98.23%, a relatively low impurity content (0.073 Wt.% of carbon and 0.06 Wt.% of oxygen) and an ideal pseudoelasticity (95% recovery rate loaded at 300 MPa). Originality/value: The effects of increasing the laser power and reducing the scanning speed on the properties of LPBF Ni54(at.%)Ti alloys were studied in this paper. This work is an upgrade and supplement to the existing research on fabricating Ni-rich Ni–Ti alloys by the LPBF method. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this study is to test a flexible polymer with different characteristics compared to other classical polymers mostly used in the additive manufacturing process, and to improve its mechanical properties and microstructure, by modifying different printing parameters, to make it more suitable for various industrial applications. Design/methodology/approach: Seven parameters were tested, namely, nozzle temperature, bed temperature, layer thickness, printing speed, flow rate, printing time gap between two successive printed layers and raster orientation. Rheological characterizations were conducted to evaluate the influence of nozzle temperature on the melt viscosity of thermoplastic polyurethane (TPU). The effect of thermal printing parameters on the crystallinity behavior was explored. Tomographic characterizations were realized to measure the porosity and evaluate the internal structure quality of printed specimens. Findings: Increases of the nozzle temperature, bed temperature, layer thickness and flow rate had a positive influence on the tensile strength properties of TPU with a reduction of porosity. Higher printing speeds created defects and negatively influenced the strength properties of TPU. An increase in the printing time gap between layers led to poor interlayer adhesion and decreased the tensile strength. Specimens with layers all oriented parallel to the loading direction exhibited superior mechanical properties compared to other raster orientations. Originality/value: Thermoplastic elastomers are a unique class of polymers characterized by the combined thermal, chemical and mechanical properties of their elastomer and thermoplastic parts. TPU elastomer, as one of the elastomer families, has found an important position in the bioengineering and three-dimensional printing industry. This study reports a comprehensive study of the impact of additive manufacturing parameters on the properties of TPU. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to investigate the morphology and tensile properties of SAC305 solder alloy under the influence of microwave hybrid heating (MHH) for soldering at different microwave parameters. Design/methodology/approach: Si wafer was used as susceptor in MHH for solder reflow. Microwave operating power for medium and high ranging from 40 to 140 s reflow time was used to investigate their effect on the microstructure and strength of SAC305/Cu solder joints. The morphology and elemental composition of the intermetallic compound (IMC) joint were evaluated on the top surface and cross-sectional view. Findings: IMC formation transformed from scallop-like to elongated scallop-like structure for medium operating power and scallop-like to planar-like structure for high operating power when exposed to longer reflow time. Compositional and phase analysis confirmed that the observed IMCs consist of Cu6Sn5, Cu3Sn and Ag3Sn. A thinner IMC layer was formed at medium operating power, 80 s (2.4 µm), and high operating power, 40 s (2.5 µm). The ultimate tensile strength at high operating power, 40 s (45.5 MPa), was 44.9% greater than that at medium operating power, 80 s (31.4 MPa). Originality/value: Microwave parameters with the influence of Si wafer in MHH in soldering have been developed and optimized. A microwave temperature profile was established to select the appropriate parameter for solder reflow. For this MHH soldering method, the higher operating power and shorter reflow time are preferable. [ABSTRACT FROM AUTHOR]

Purpose: This paper aims to investigate effect of infill density, fabricated built orientation and dose of gamma radiation to mechanical tensile and compressive properties of polylactic acid (PLA) part fabricated by fused deposit modelling (FDM) technique for medical applications. Design/methodology/approach: PLA specimens for tensile and compressive tests were fabricated using FDM machine. The specimens geometry and test method were referred to ASTM D638 and ASTM D695, respectively. Three orientations under consideration were flat, edge and upright, whereas the infill density ranged from 0 to 100%. The gamma radiation dose used to expose to specimens was 25 kGy. The collected data included stress and strain, which was used to find mechanical properties, i.e. yield strength, ultimate tensile strength (UTS), fracture strength, elongation at yield, elongation at UTS and elongation at break. The t-test was used to access the difference in mechanical properties. Findings: Compressive mechanical properties is greater than tensile mechanical properties. Increasing number of layer parallel to loading direction and infill density, it enhances the material property. Upright presents the lowest mechanical property in tensile test, but greatest in compressive test. Upright orientation should not be used for part subjecting to tensile load. FDM is more proper for part subjecting to compressive load. FDM part requires undergoing gamma ray for sterilisation, the infill density no less than 70 and 60% should be selected for part subjecting to tensile and compressive load, respectively. Originality/value: This study investigated all mechanical properties in both tension and compression as well as exposure to gamma radiation. The results can be applied in selection of FDM parameters for medical device manufacturing. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to focus on the effect of interlayer bonding and thermal decomposition on the mechanical properties of fused filament fabrication-printed polylactic acid specimens at high extrusion temperatures. Design/methodology/approach: A printing process, that is simultaneous manufacturing of contour and specimen, is used to improve the printing accuracy at high extrusion temperatures. The effects of the extrusion temperature on the mechanical properties of the interlayer and intra-layer are evaluated via tensile experiments. In addition, the microstructure evolution affected by the extrusion temperature is observed using scanning electron microscopy. Findings: The results show that the extrusion temperature can effectively improve the interlayer bonding property; however, the mechanical properties of the specimen for extrusion temperatures higher than 270°C may worsen owing to the thermal decomposition of the polylactic acid (PLA) material. The optimum extrusion temperature of PLA material in the three-dimensional (3D) printing process is recommended to be 250–270°C. Originality/value: A temperature-compensated constitutive model for 3D printed PLA material under different extrusion temperatures is proposed. The present work facilitates the prediction of the mechanical properties of specimens at an extrusion temperature for different printing temperatures and different layers. [ABSTRACT FROM AUTHOR]

Purpose: The external confinement provided by the fiber-reinforced polymer (FRP) sheets leads to an improvement in the axial compressive strength (CS) and strain of reinforced concrete structural members. Many studies have proposed analytical models to predict the axial CS of concrete structural members, but the predictions for the axial compressive strain still need more investigation because the previous strain models are not accurate enough. Moreover, the previous strain models were proposed using small and noisy databases using simple modeling techniques. Therefore, a rigorous approach is needed to propose a more accurate strain model and compare its predictions with the previous models. Design/methodology/approach: The present work has endeavored to propose strain models for FRP-confined concrete members using three different techniques: analytical modeling, artificial neural network (ANN) modeling and finite element analysis (FEA) modeling based on a large database consisting of 570 sample points. Findings: The assessment of the previous models using some statistical parameters revealed that the estimates of the newly recommended models were more accurate than the previous models. The estimates of the new models were validated using the experimental outcomes of compressive members confined with carbon-fiber-reinforced polymer (CFRP) wraps. The nonlinear FEA of the tested samples was performed using ABAQUS, and its estimates were equated with the calculations of the analytical and ANN models. The relative investigation of the estimates solidly substantiates the accuracy and applicability of the recommended analytical, ANN and FEA models for predicting the axial strain of CFRP-confined concrete compression members. Originality/value: The research introduces innovative methods for understanding FRP confinement in concrete, presenting new models to estimate axial compressive strains. Utilizing a database of 570 experimental samples, the study employs ANNs and regression analysis to develop these models. Existing models for FRP-confined concrete's axial strains are also assessed using this database. Validation involves testing 18 cylindrical specimens confined with CFRP wraps and FE simulations using a concrete-damaged plastic (CDP) model. A comprehensive comparative analysis compares experimental results with estimates from ANNs, analytical and finite element models (FEMs), offering valuable insights and predictive tools for FRP confinement in concrete. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to improve the acceleration in the additive manufacturing (AM) process. AM tools, such as extrusion heads, jets, electric arcs, lasers and electron beams (EB), experience negligible forces. However, their speeds are limited by the positioning systems. In addition, a thin tool must travel several kilometers in tiny motions with several turns while realizing the AM part. Hence, acceleration is a more significant limiting factor than the velocity or precision for all except EB. Design/methodology/approach: The sawtooth (ST) scanning strategy presented in this paper minimizes the time by combining three motion features: zigzag scan, 45º or 135º rotation for successive layers in G00 to avoid the CNC interpolation, and modifying these movements along 45º or 135º into sawtooth to halve the turns. Findings: Sawtooth effectiveness is tested using an in-house developed Sand AM (SaAM) apparatus based on the laser–powder bed fusion AM technique. For a simple rectangle layer, the sawtooth achieved a path length reduction of 0.19%–1.49% and reduced the overall time by 3.508–4.889 times, proving that sawtooth uses increased acceleration more effectively than the other three scans. The complex layer study reduced calculated time by 69.80%–139.96% and manufacturing time by 47.35%–86.85%. Sawtooth samples also exhibited less dimensional variation (0.88%) than zigzag 45° (12.94%) along the build direction. Research limitations/implications: Sawtooth is limited to flying optics AM process. Originality/value: Development of scanning strategy for flying optics AM process to reduce the warpage by improving the acceleration. [ABSTRACT FROM AUTHOR]

Purpose: The current study aims to develop a 3D-printed continuous metal fiber-reinforced recycled thermoplastic composite using an in-nozzle impregnation technique. Design/methodology/approach: Recycled acrylonitrile butadiene styrene (RABS) plastic was blended with virgin ABS (VABS) plastic in a ratio of 60:40 weight proportion to develop a 3D printing filament that was used as a matrix material, while post-used continuous brass wire (CBW) was used as a reinforcement. 3D printing was done by using a self-customized print head to fabricate the flexural, compression and interlaminar shear stress (ILSS) test samples to evaluate the bending, compressive and ILSS properties of the build samples and compared with VABS and RABS-B samples. Moreover, the physical properties of the samples were also analyzed. Findings: Upon three-point bend, compression and ILSS testing, it was found that RABS-B/CBW composite 3D printed with 0.7 mm layer width exhibited a notable improvement in maximum flexural load (Lmax), flexural stress at maximum load (sfmax), flex modulus (Ef) and work of fracture (WOF), compression modulus (Ec) and ILSS properties by 30.5%, 49.6%, 88.4% 13.8, 21.6% and 30.3% respectively. Originality/value: Limited research has been conducted on the in-nozzle impregnation technique for 3D printing metal fiber-reinforced recycled thermoplastic composites. Adopting this method holds the potential to create durable and high-strength sustainable composites suitable for engineering applications, thereby diminishing dependence on virgin materials. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of this paper is to investigate the process of fused filament fabrication (FFF) of a compliant gripper (CG) using thermoplastic polyurethane (TPU) material. The paper studies the applicability of different CG designs and the efficiency of some design parameters. Design/methodology/approach: After reviewing a number of different papers, two designs were selected for a number of exploratory experiments. Using design of experiments (DOE) techniques to identify important design parameters. Finally, the efficiency of the parts was investigated. Findings: The research finds that a simpler design sacrifices some effectiveness in exchange for a remarkable decrease in production cost. Decreasing infill percentage of previous designs and 3D printing them, out of TPU, experimenting with different parameters yields functional products. Moreover, the paper identified some key parameters for further optimization attempts of such prototypes. Research limitations/implications: The cost of conducting FFF experiments for TPU increases dramatically with product size, number of parameters studied and the number of experiments. Therefore, all three of these factors had to be kept at a minimum. Further confirmatory experiments encouraged. Originality/value: This paper addresses an identified need to investigate applications of FFF and TPU in manufacturing functional efficient flexible mechanisms, grippers specifically. While most research focused on designing for increased performance, some research lacks discussion on design philosophy, as well as manufacturing issues. As the needs for flexible grippers vary from high-performance grippers to lower performance grippers created for specific functions/conditions, some effectiveness can be sacrificed to reduce cost, reduce complexity and improve applicability in different robotic assemblies and environments. [ABSTRACT FROM AUTHOR]

Purpose: This study aims to investigate the impact of varying the number of minimum quantity lubrication (MQL) nozzles, wind pressure, spindle speed and type of lubrication on surface roughness, fatigue life and tool wear in the drilling of aluminum alloy 6061-T6. Design/methodology/approach: The effect of using different lubricants such as palm oil, graphene/water nanofluid and SiO2/water in the MQL method was compared with flood and dry methods. The lubricant flow and feed rate were kept constant throughout the drilling, while the number of nozzles, wind pressure and spindle speed varied. After preparing the parts, surface roughness, fatigue life and tool wear were measured, and the results were analyzed by ANOVA. Findings: The results showed that using MQL with four nozzles and graphene/water nanofluid reduced surface roughness by 60%, followed by SiO2 nanofluid at 56%, and then by palm oil at 50%. Increasing the spindle speed in MQL mode with four nozzles using graphene nanofluid decreased surface roughness by 52% and improved fatigue life by 34% compared to the dry mode. SEM results showed that tool wear and deformation rates significantly decreased. Increasing the number of nozzles caused the fluid particles to penetrate the cutting area, resulting in improved tool cooling with lubrication in all directions. Originality/value: Numerous attempts have been made worldwide to eliminate industrial lubricants due to environmental pollution. In this research, using nanofluid with wind pressure in MQL reduces environmental impacts and production costs while improving the quality of the final workpiece more than flood and dry methods. Peer review: The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-01-2024-0021/ [ABSTRACT FROM AUTHOR]

Purpose: This paper presents a novel method for identifying damage in reinforced concrete (RC) bridges, utilizing macro-strain data from distributed long-gauge sensors installed on the concrete surface. Design/methodology/approach: The method relies on the principle that heavy vehicles induce larger dynamic vibrations, leading to increased strain and crack formation compared to lighter vehicles. By comparing the absolute macro-strain ratio (AMSR) of a reference sensor with a network of distributed sensors, damage locations can be effectively pinpointed from a single data collection session. Finite-element modeling was employed to validate the method's efficacy, demonstrating that the AMSR ratio increases significantly in the presence of cracks. Experimental validation was conducted on a real-world bridge in Japan, confirming the method's reliability under normal traffic conditions. Findings: This approach offers a practical and efficient means of detecting bridge damage, potentially enhancing the safety and longevity of infrastructure systems. Originality/value: Original research paper. [ABSTRACT FROM AUTHOR]

Purpose: In order to achieve the desired macroscopic mechanical properties of woven fiber reinforced polymer (FRP) materials, it is necessary to conduct a detailed analysis of their microscopic load-bearing capacity. Design/methodology/approach: Utilizing the representative volume element (RVE) model, this study delves into how the material composition influences mechanical parameters and failure processes. Findings: To study the ultimate strength of the materials, this study considers the damage situation in various parts and analyzes the stress-strain curves under uniaxial and multiaxial loading conditions. Furthermore, the study investigates the degradation of macroscopic mechanical properties of fiber and resin layers due to fatigue induced performance degradation. Additionally, the research explores the impact of fatigue damage on key material properties such as the elastic modulus, shear modulus and Poisson's ratio. Originality/value: By studying the load-bearing mechanisms at different scales, a direct correlation is established between the macroscopic mechanical behavior of the material and the microstructure of woven FRP materials. This comprehensive analysis ultimately elucidates the material's mechanical response under conditions of fatigue damage. [ABSTRACT FROM AUTHOR]