Search

Non-targeted analysis and suspect screening of per- and polyfluoroalkyl substances (PFAS) in various matrices have gained traction with advancements in accurate mass analytical instruments. This study employed ultra-high performance liquid chromatography coupled to quadrupole orbitrap high-resolution mass spectrometry for PFAS suspect screening of paper grades used in the paper recycling chain. The samples were prepared using two extraction techniques; selective accelerated solvent extraction with weak anionic exchange solid-phase extraction and non-selective ultrasonic-assisted extraction. A suspect screening protocol was established to tentatively identify suspected PFAS against spectral databases using a systematic approach of peak filtering and study-specific thresholds for reporting, linked to a confidence level. The possible prevalence of previously unreported PFAS in several paper materials across the various collection sites in the paper recycling chain was inferred by the common detection of short-chain polyfluoroalkyl ketones and diketones in the paper recycling chain. The suspect screening tentatively identified 41 unique PFAS, with 3 common to both pre-treatment techniques. The detection of unique PFAS by the two sample pre-treatment techniques highlighted the significance of both selective and non-selective extraction in PFAS screening endeavours. Further, it showed the importance of understanding the acquisition mechanisms employed in mass spectrometry where data-dependent acquisition triggered fragmentation in certain identified compounds, and not in others. The tentatively identified PFAS indicated that there were several previously unreported PFAS in the paper recycling chain and that additional studies were required to investigate their abundance, possible persistence, bioaccumulation and toxicity, in relation to their functional groups and carbon chains., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Nondumiso Mofokeng reports funding was provided by Mpact Operations Pty (Ltd). All other authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The increased production and expanding demand for cellulosic products have required companies to provide solutions for the proper disposal of generated residues without compromising soil quality. In this context, the current research aimed at evaluating the ecotoxicological impacts of dregs application in subtropical soils. The experiments were carried out with the earthworm Eisenia andrei, the springtail Folsomia candida, and the potworm Enchytraeus crypticus in two subtropical soils (Neosol and Cambisol) collected in the southern region of Brazil. The considerable differences in texture and organic matter content motivated the choosing of these soils. The reproductive rate of all organisms was influenced, with varying EC 50 values depending on the soil type. However, more pronounced effects were observed for Neosol. The springtail F. candida proved to be the most sensitive to contamination (EC 50  = 5.8 g kg -1 for Neosol and 48.5 g kg -1 for Cambisol), followed by the earthworm E. andrei (EC 50  = 62.4 g kg -1 for Neosol and 129.5 g kg -1 for Cambisol) and the potworm E. crypticus (EC 50  = 67.2 g kg -1 for Neosol and 230.4 g kg -1 for Cambisol). As a result, while dregs can be used to correct soil acidity, they have been shown to have negative effects on important organisms responsible for functions critical to maintaining ecosystem quality., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The present study employed powdered activated coke (PAC) for the adsorptive removal of refractory COD from the bio-treated paper wastewater (BTPW). The adsorption reached equilibrium after 3 h, resulting in a decrease in the COD concentration from 98.9 mg L -1 in BTPW to 42.6 mg L -1 when utilizing a PAC dosage of 5 g L -1 . The dominant fractions of dissolved organic matter in BTPW were hydrophilic acids (HIA), hydrophilic neutrals (HIN), and hydrophobic acids (HOA), accounting for 48.8%, 34.2%, and 17.0% of the total dissolved organic carbon, respectively. Three fractions were all predominantly composed of humic/fulvic acid-like substances, while the HOA fraction exhibited highest susceptibility to adsorption by PAC, followed by the HIA and HIN fractions. FT-ICR MS data revealed PAC preferentially adsorbed the unsaturated and oxygen-rich substances containing more carboxyl groups. Additionally, the spent PAC was regenerated through ozonation and subsequently utilized in the adsorption cycles. The regeneration was successfully conducted under an ozone concentration of 1 mg L -1 for a duration of 10 min, and the regeneration efficiency remained about 87.0% even after undergoing five-cycle of adsorption-regeneration. The findings of this study demonstrate that PAC adsorption is a viable and efficacious treatment technology for efficiently removing refractory COD from BTPW., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The large use and emission of p-nitrophenol (p-NP) seriously pollute the environment and endanger human health. In this work, a hydrazone-linked fluorescent covalent organic framework (BATHz-COF) was simply synthesized at room temperature and covalently linked N-acetyl-L-cysteine (NALC) via the "thiol-ene" click reaction, where carboxyl groups were introduced to improve dispersion and fluorescence intensity. As a rapid, good selectivity and reusability fluorescence sensor, the obtained COF-NALC has been used for quantitative analysis of p-NP predicated on the internal filtering effect (IFE). Under optimal conditions, COF-NALC enabled quantitative detection of p-NP with a linear range of 5-50 μM and the detection limit was 1.46 μM. The application of COF-NALC to the detection of p-NP in river water samples was successful, and the satisfactory recoveries were 98.0%-109.3%. Furthermore, the fluorescent COF paper chips constructed by in situ growth were combined with a smartphone to build a visual platform for the quick and real-time detection of p-NP, providing an excellent illustration for the development of intelligent fluorescence sensing in environmental analysis., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

The reuse of waste papers by conversion into valuable carbon materials has received considerable attention for diverse applications such as energy storage and water purification. However, traditional methods for converting waste papers into materials with suitable properties for specific applications are often complex and ineffective, involving consecutive carbonization and activation steps. Herein, we propose a simple one-step microwave (MW)-assisted synthesis for preparing waste paper-derived porous carbons (WPCs) for energy storage and water purification. Through a 30-min synthesis, WPCs with graphitic structure and high specific surface area were successfully produced. The fabricated WPCs exhibited outstanding charge storage capability with a maximum specific capacitance of 237.7 F g -1 . Additionally, the WPC demonstrates a high removal efficiency for various dyes, achieving a maximum removal efficiency of 95.0% for methylene blue. The developed one-step MW synthesis not only enables the production of porous carbon from waste paper, but also offers a viable approach to address solid waste management challenges while simultaneously yielding valuable materials., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The deinking in the paper industry is in great demand, and microbial enzymes are key players. In the present study, the endoglucanase production from newly isolated fungi Aspergillus niger MPS25 is reported. The optimization of endoglucanase production was carried out using one factor at a time approach resulting in endoglucanase activity (2.37 IU/ml) at 45 °C and pH 8 in submerged fermentation (SmF), which shows optimum enzyme activity at 60 °C. Interestingly, the metal ions viz. Co 2+ stimulated the endoglucanase activity, whereas Mn 2+ reduced the enzyme activity, which shows that this enzyme can be used for effluent treatment released through deinking. The enzymatic hydrolysis of wheat straw produced 26.96 ± 0.108 mg/g of reducing sugars, indicating its potential in saccharification and the biofuel industry. Furthermore, the validation of the deinking efficiency of this enzyme resulted in improved deinking of mixed office waste and old newspapers by 31.5% and 20.4%, respectively. The strength properties, viz. burst factor and tear index, breaking length, and tensile index of the handmade paper sheets, were also improved which were analyzed by the scanning electron micrographs. The FTIR and XRD analysis of pulp provided insights into the changes in functional groups and cellulose crystallinity, respectively. These results indicate that multi-efficient endoglucanase from Aspergillus niger MPS25 is suitable for enzyme-based eco-friendly deinking for waste paper recycling and lignocellulosic biomass saccharification., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Aim of this research was to treat the organics enriched Paper and Pulp Industry (PPI) effluents using multi-metal tolerant predominant indigenous bacterial species. In addition, assessing the potential of treated bacterial biomass as a single cell protein (SCP). The multi-metal tolerant Streptomyces tuirus OS1 was enumerated from the Paper and Pulp Industry (PPI) effluents was identified through standard molecular characterization. S. tuirus OS1 proficiently ameliorated organic contaminants in PPI effluent in the in study at 35 °C, 45 °C, and 25 °C. Fortunately, the S. tuirus OS1 considerably increased the dissolved oxygen level in treated PPI effluent in 30 days of bioremediation process. Interestingly, at 35 °C of bioremediation process the S. tuirus OS1 demonstrated increased dried biomass (7.1 g L -1 ) with the total crude protein (SCP) as 5.3 g L -1 (78.79%) in 30 days of bioremediation process. These findings suggest that S. tuirus OS1 is capable of reducing organic pollutants in PPI effluents and producing biomass with enriched protein content., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Due to the presence of various organic contaminants, improper disposal of pulp-paper wastewater poses harm to the environment and human health. In this work, pulp-paper sludge (PPS) after secondary treatment were collected from M/s Century Pulp-paper Mills in India, the chemical nature of the organic pollutants was determined after solvent extraction. All the isolates were able to produce lipase (6.34-3.93 U ml -1 ) which could account for the different fatty acids detected in the PPS. The dominant strains were in the classes of α and γ Proteobacteria followed by Firmicutes. The Shannon-Weiner diversity indexes for phylotype richness for the culturable and non-culturable bacterial community were 2.01 and 3.01, respectively, indicating the non-culturable bacterial strains has higher species richness and diversity compared to the culturable bacterial strains. However, the culturable strains had higher species evenness (0.94 vs 0.90). Results suggested only a few isolated strains were resistant to the POPs in the PPS, where as non-cultural bacteria survived by entering viable but non-cultural state. The isolated strains (Brevundimonas diminuta, Aeromonas punctata, Enterobacter hormaechei, Citrobacter braakii, Bacillus pumilus and Brevundimonas terrae) are known for their multidrug resistance but their tolerance to POPs have not previously been reported and deserved further investigation. The findings of this research established the presence of POPs which influence the microbial population. Tertiary treatment is recommended prior to the safe disposal of pulp paper mill waste into the environment., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The landfilling of paper mill sludge (PMS) has been restricted or even banned in many countries due to the raised concern about greenhouse gas (GHG) emissions and contamination of the soil and water, calling for a sustainable PMS management approach. The potential valorization of PMS to nanomaterials combined with traditional biorefinery was examined in this work. Three types of PMS-derived cellulose nanofibrils (CNFs) were prepared and evaluated: enzymatically assisted CNF (AU: with in-house produced enzyme and CT: with commercial enzyme), mechanically pretreated CNF (BT), and chemically pretreated CNF by TEMPO oxidation (TEMPO). It was found that enzyme-assisted mechanical fibrillation-derived CNFs had a comparable average diameter (27.9 nm for AU and 22.7 nm for CT) with that produced from mechanical pretreatment (26.5 nm for BT) and TEMPO oxidation pretreatment (20.0 nm for TEMPO), and they showed the best drainage properties among the three types of CNF. The CNFs resulting from enzymatic pretreatment reduced 15% of energy consumption compared to the mechanical method and had better thermostability than TEMPO oxidation method. In addition, the on-site produced enzyme showed similar performance to the commercial enzymes towards the CNF properties. These findings provide new insights into a promising integrated strategy in engineering CNF from PMS with on-site enzyme production as a novel and sustainable approach for PMS management and valorization., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Heavy metals released by anthropogenic activities are extremely toxic to animals and plants due to their bioaccumulative and persistent environmental presence. In the current study, silver nanoparticles (AgNPs) were synthesized utilizing eco-friendly processes, and their potential in colorimetric Hg 2+ ion sensing in environmental samples was examined. An aqueous extract of Hemidesmus indicus root (Sarsaparilla Root, ISR) rapidly converts silver ions into AgNPs within 5 min of exposure to sunlight. Transmission electron microscopy confirms that ISR-AgNPs are spherical, ranging from 15 to 35 nm. Fourier-transform infrared spectroscopy revealed phytomolecules stabilized the NPs with hydroxyl and carbonyl substituents. The ISR-AgNPs detect Hg 2+ ions by a colour change that can be seen with the naked eye within 1 min. The probe is interference-free and detects the presence of Hg 2+ ions in sewage water. A method for fabricating ISR-AgNPs onto paper was disclosed, and this portable ISR-AgNPs embedded paper device was found to be good at sensing mercury present in the water. The findings show that environmentally friendly synthesized AgNPs can contribute to developing onsite colorimetric sensors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Hypochlorous acid (HClO) and derivative ionic form (ClO - ) are significant components of reactive oxygen species, and thus various diseases are correlatively related to the concentration of ClO - . Recently, paper-based indicators have been confirmed to be efficient strategy for sensing hazardous and noxious substances. However, most of these materials can only achieve qualitative detection of the substrates. Herein, an extremely simple manufacturing strategy was proposed to convert commonly-used paper into nano-engineered fluorescent biomass-based platform (CMJL-FP) integrated with on-demand self-assembled colorimetric and ratiometric fluorescence sensor (CMJL) for rapid ClO - quantitative detection in organisms or water sources using smartphones. The CMJL exhibited a highly selective and sensitive ratiometric response to ClO - at a low detection limit (LOD = 92.6 nM). The associating interactions between the fluorescence nano-particles and micro-nano fibers of CMJL-FP ensure good-stability during ClO - detection. It has been experimentally demonstrated that CMJL-FP allows one to realize the rapid quantitative detection of ClO - ions in living cells and large-scale water sources by using color recognition software as part of a simple smartphone. Therefore, integrating the proposed fluorescent paper with smartphones provides an effective, sustainable, cheap and conceptual strategy for quantitative detection of hazardous and noxious substances in organisms and environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

As a typical advanced oxidation process, Fe 2+ -persulfate (PDS) oxidation technology has been widely and efficiently reported for enhancing sludge dewaterability. However, higher dosage of Fe 2+ must be added, which will restrain the oxidation efficiency of Fe 2+ -PDS process. In this work, the oxalic acid (OA)/Fe 2+ -PDS process was studied to improve paper sludge dewatering. With the OA dosage of 6 μmol (g total solid (TS)) -1 , Fe 2+ dosage of 0.3 mmol (g TS) -1 , and PDS dosage of 0.6 mmol (g TS) -1 , sludge dewaterability was improved more efficiently. The specific resistance to filtration and water content of sludge cake were decreased by 70.7% and 8.0%, respectively. In comparison with Fe 2+ -PDS process, the viscosities of sludge suspension and supernatant were further reduced by 3.73% and 51.77%, respectively, and the contents of extracellular polymeric substances fractions were increased. The improved sludge dewaterability in OA/Fe 2+ -PDS process was mainly contributed by the synergistic effect of oxidative disintegration by free radicals and flocs re-flocculation, the contributions of which were the orders: metal cations > sulfate radical > hydroxyl radical. OA enhanced the efficient disintegration of sludge flocs, released more bound water, generated more Fe 3+ -oxalate complexes, and finally increased the sludge particle size significantly, forming a larger aggregation and obvious cracks. Additionally, the stabilization of several heavy metals was improved due to the chelating capacity of OA. These works will provide a novel approach for sludge dewatering in the PDS oxidation process., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Microplastics (MPs) have been found in many packaged food products such as salt, tea bags, milk, and fish. In a previous study by this group, MPs were found to leach into hot water from the plastic lining of disposable paper cups. No studies were found in the literature quantifying health risks or lifetime intake of MPs. At present, it is not possible to quantify health risks due to MPs because dose-response and toxicity assessments are not available. Therefore, the objective of the current study was to assess the intake of MPs and associated contaminants like fluoride that are released into these hot beverages. MPs in the previous study were quantified in terms of particle counts only and a simple method was adopted in the present study to convert the microplastics count into its respective mass. Chronic daily intake (CDI) and lifetime intake (LTI) of MPs through the ingestion pathway were calculated. CDI and Hazard Quotient (HQ) due to fluoride ingestion were also estimated following USEPA guidelines. Monte Carlo (MC) simulations were used to account for the variability in input variables such as concentration of MPs, body weight, averaging time, exposure duration, exposure frequency and ingestion rate to evaluate the impact on CDI and LTI values. The CDI was used to estimate the LTI of MPs and HQ for fluoride ingestion. MC simulations with 100,000 iterations resulted in an average CDI of 0.03 ± 0.025 mg of microplastic per kg of body weight per day and 7.04 ± 8.8 μg fluoride per kg body weight per day. This study takes us one step closer to estimating the human health risk due to the ingestion of microplastics and other contaminants through food items., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Sudha Goel reports financial support, administrative support, and equipment, drugs, or supplies were provided by Indian Institute of Technology Kharagpur. Sudha Goel reports a relationship with Indian Institute of Technology Kharagpur that includes: employment. Sudha Goel has patent none pending to none. None., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Organic toxins are persistent chemicals of global concern capable of accumulating in environment and food. Surface enhanced Raman spectroscopy (SERS) is a promising technique that facilitates onsite detection of organic toxins. However, the fabrication of a SERS substrate is complicated and difficult to provide flexibility, fastness and cost-effectiveness. This study aims to develop a paper-based SERS method using grape skin-gold nanoparticles/graphene oxide (GE-AuNPs/GO) as SERS substrate and evaluate its efficiency with rhodamine 6G (Rh6G) as a model organic toxin and a real water and food contaminant. GE-AuNPs synthesized by green method using grape skin waste extract and GE-AuNPs/GO showed a surface plasmon resonance at 536 and 539 nm, particle size 18.6 and 19.5 nm, and zeta potential -44.6 and -59.7 mV, respectively. Paper-based SERS substrates were prepared by coating a hydrophobic thin-film of 30% polydimethylsiloxane solution in hexane on Whatman no. 1 filter paper, followed by drop-casting GE-AuNPs or GE-AuNPs/GO and drying. The SERS signals of Rh6G showed an enhancement factor of 5.8 × 10 4 for GE-AuNPs and 1.92 × 10 9 for GE-AuNPs/GO, implying that a combination of electromagnetic surface plasmon, charge transfer and molecular resonances may be responsible for a higher enhancement of signal by the latter. A low detection limit of 7.33 × 10 -11  M in the linear range of 10 -11 -10 -5  M was obtained for GE-AuNPs/GO, while the relative standard deviation of repeatability and reproducibility was 9.6 and 12.6%, respectively. Paper-based GE-AuNPs/GO SERS substrate was highly stable as <20% loss in efficiency was shown over a 60-day storage period. Application to real samples showed a high recovery of Rh6G from tap water (93.9-100.8%) as well as food samples such as red chilli powder (91.0-95.4%), red glutinous rice ball (96.6-98.3%) and tomato ketchup (98.9-102.3%) after QuEChERS extraction. Collectively, the developed paper-based GE-AuNPs/GO can be a potential substrate for sensitive onsite detection of rhodamine 6G by SERS method., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The graphene quantum dots (GQDs) was synthesized using potato starch and water by hydrothermal method and further used for reduction of tetracholoroauric acid to form graphene quantum dots-gold (GQDs@AuNPs) nanocomposite. The GQDs/GQDs@AuNPs were analyzed using FTIR, UV-Vis, Flourometry and HR-TEM. The synthesized GQDs@AuNPs were further used for fabrication of cost-effective screen-printed paper electrode (SPPE) based DNA sensor for the detection of O. tsutsugamushi using htrA gene specific 5'NH2 linked DNA probe. Modification of SPPE using GQDs@AuNPs nanocomposite and ssDNA probe was monitored using EIS, FTIR, FE-SEM and AFM. The sensor detection limit (LOD) was assessed as 0.002 ng/μl from the standard calibration curve with the correlation coefficient, R 2  = 0.993. The sensitivity of the DNA sensor was calculated as 7700 μA/cm 2 /ng for ssGDNA of O. tsutsugamushi using cyclic voltammetry. The sensor validation was done using scrub typhus patient's blood DNA samples. The sensor showed good storage stability at 4 °C for six months with just a loss of 12% of the initial current values. The SPPE/DNA sensor developed is very specific, sensitive, stable and detects O. tsutsugamushi in less time., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

The incidence of differentiated thyroid cancer (DTC) has been increasing worldwide, mostly, as an increase in the incidental detection of micro papillary thyroid carcinomas (microPTCs), many of which are potentially overtreated, as suggested by the unchanged mortality. Several international guidelines have suggested a less aggressive approach. More recently, it has been shown that active surveillance or minimally invasive treatments (MIT) are good alternatives for the management of these patients. In this context, patient participation in the decision-making process is paramount. The Endocrine Task Force of the European Organisation for Research and Treatment of Cancer (EORTC) has undertaken the task to establish consensus and define its position based on the scientific evidence concerning, 1) the current state of diagnostic and management options in microPTCs, including the current opinion of physicians about shared decision making (SDM), 2) the available evidence concerning patients' needs and the available decision instruments, and 3) to provide practical suggestions for implementation of SDM in this context. To improve SDM and patients' participation, knowledge gaps and research directions were highlighted., Competing Interests: Conflict of interest statement The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The pulp and paper industry consumes enormous quality of freshwater, leading to wastewater. It must be treated to remove pollutants, particularly residual dyestuffs, before releasing them to water bodies to avoid adverse environmental effects. The traditional wastewater treatment methods used for the pulp and paper industry are less efficient in colour and chemical oxygen demand (COD) removal. The current study is aimed at developing a novel catalyst for the catalytic ozonation of pulp and paper wastewater with better colour and COD removal for sustainable resources of clean water. The proposed catalyst is impregnated by iron on natural zeolites. Various parameters such as catalyst dose, pH, ozone dose, initial COD concentration, and reaction time are studied and optimized. The performance was evaluated by comparing the results with the single ozonation process (SOP) and catalytic ozonation process (COP). The highest COD and colour reduction efficiencies have been achieved, i.e., 71%, and 88% at a natural pH of 6.8. The proposed process achieved higher COD and colour efficiencies than the single ozonation process and catalytic ozonation process using raw zeolites. The improvement in efficiencies are 23% and 29% for SOP and 17% and 19% for COP, respectively. Hence, the results proposed the sustainability and applicability of COP to treat paper and pulp sector effluent., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In the present study, the concurrent fixed-bed dual technology (photocatalysis and photo-Fenton) was performed as a polishing step for the color removal of tertiary treated agro-based paper & pulp industry effluent. For this purpose, the cheap and visibly dynamic Fe-TiO 2 composite was prepared using industrial waste materials which also promoted the idea of the circular economy. The effectiveness of the prepared composite and the dual process was evaluated in terms of color removal efficiency and rate constant along with optimizing the process factors. Various kinetic models namely Log-linear, Weibull, and Biphasic with shoulder were used for the comparative study of three different processes i.e. photocatalysis, photo-Fenton, and dual process. Several parameters such as pH (4.5), % surface area covered (100%), and H 2 O 2 dose (525 mgL -1 ) were optimized which gave the best output using dual-process i.e. 91.6% of color reduction along with good R 2 values i.e. 0.874, 0.981 and, 0.998 for Log-linear, Weibull and, Biphasic with Shoulder model respectively. The proposed composite was durable enough to retain its dual catalytic ability with minor activity reduction of 5-10% even after 50 recycles. Thus, this innovative technology with the dual effect of photocatalysis and photo-Fenton can be a potential bet as a tertiary treatment option in the existing industrial wastewater treatment system for removing color from the final treated effluent., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

Facing the huge output of food waste (FW) and paper waste (PW), long-term semi-continuous experiments were carried out to investigate the effect of the substrate organic composition on mesophilic and thermophilic anaerobic co-digestions (Co-ADs) of their mixtures. The experimental results showed that the organic composition of the substrate affected the biogas and methane production and yield of the two Co-ADs of the FW and PW mixtures, and its effect on thermophilic Co-AD (Co-TAD) was lower than that on mesophilic Co-AD (Co-MAD). The two Co-ADs had similar biogas (2.158 ± 0.136 L/L/d and 2.183 ± 0.142 L/L/d) and methane production (1.245 ± 0.082 L/L/d and 1.279 ± 0.088 L/L/d), and organic matter degradation (81.79 ± 1.07% and 83.81 ± 1.09%) when the substrate organic composition was carbohydrates:proteins:lipids = 6.8:1.8:1 (low carbohydrate composition, FW:PW = 4:1). When the substrate organic composition was carbohydrates:proteins:lipids = 13.5:2:1 (high carbohydrate composition, FW:PW = 1:1), the thermophilic temperature was more favorable than the mesophilic temperature for the Co-AD of FW and PW mixtures. The characteristics (pH, total ammonia, total volatile fatty acids, and total alkalinity) of the Co-TAD digestate were more sensitive to changes in the organic composition of the substrate than those of the Co-MAD digestate. Increasing the carbohydrate content of the FW:PW mixture lowered the production of biogas and methane, and degradation of organic matter in both Co-ADs., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Herein, bifunctional two-dimensional copper-aluminum modified filter paper composite (2D-Cu/Al-C) was successfully prepared by simple calcination and showed ultrahigh adsorption performance and degradation potential. The adsorption removal of TC on 2D-Cu/Al-C all exceeded 92.2% under solution conditions of 10-200 mg/L TC, 100 mg/L 2D-Cu/Al-C, pH 8 and 298 K. The pseudo-second-order kinetic and Langmuir models better fitted the kinetic and isotherm data via spontaneous and exothermic process, and the maximum capacity of the 2D-Cu/Al-C was 2391.78 mg/g. Additionally, 2D-Cu/Al-C showed desired specific adsorption for TC (TC: 98.7%, norfloxacin: 5.8%, sulfamethoxazole: 2.1%, and ciprofloxacin: 1.8%) and it could effectively adsorbed TC even in the binary system (various coexisting ions or natural organic matter). After TC adsorbed on adsorbent was mineralized into CO 2 and H 2 O by adding peroxydisulfate to generate high electrode potential radical in another limited systems, the 2D-Cu/Al-C still had ∼89.12% on TC removal (initial concentration of 50 mg/L) after five experimental cycles. Zeta potential, FT-IR and XPS results indicated that the multi-adsorption mechanism, including electrostatic interactions, complexation, and H-bonds, played a vital role in the fast and efficient adsorption process. Thus, the way of combining adsorption and regeneration via degradation are green, non-polluting strategy which are expected to be applied for water purification in future environmental remediation., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Bisphenol A (BPA) a synthetic, high production volume chemical identified as endocrine disruptor and toxic to reproduction is mainly used in the production of polycarbonate plastics, in epoxy resins, polyvinylchloride, thermal papers as color developer, and is present in a wide range of consumer goods such as food packaging materials, storage containers, and cash receipts. Due to its effects on health and legal restrictions, BPA is increasingly replaced by other bisphenols. In this study, BPA and 13 alternatives including BPS, Bisphenol F (BPF), Bisphenol B (BPB), Bisphenol C (BPC), Bisphenol Z (BPZ), Bisphenol M (BPM), Bisphenol P (BPP), Bisphenol AF (BPAF), Bisphenol FL (BPFL), Bisphenol C12 (BPC12), Tetramethylbisphenol A (tmBPA), 4,4-bisphenol (BP-4,4), and p,p-oxybisphenol were analyzed in thermal paper cash receipts (content) and migration studies were carried out in BPA-free labelled reusable plastic drinking bottles using a sensitive UHPLC-MS/MS method. The receipts contained almost only BPA and BPS, whereas BPS was found in all samples ranging at levels up to 38 μg/g. BPA was detected at low concentrations, only in one sample 11,000 μg/g were found, exceeding the EU limit of BPA in thermal paper of 0.02% per weight. In leaching solutions from the drinking bottles BPA, BPS and BPF were found at concentrations up to 0.047 μg/L BPA, 0.043 μg/L BPS, and <0.01 μg/L BPF. No other analogues were detected. However, these levels identified are far below the legal limits. In addition, a theoretical exposure assessment was conducted indicating that exposures were within the current regulatory guidelines., (Copyright © 2021 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Herein, using dialdehyde waste paper (DAWP) as a cross-linking agent to immobilize persimmon tannin (PT) was first used to remove the U(VI) and Cr(VI) via the "waste control by waste" concept. The microscopic and macroscopic surface properties of the as-prepared adsorbent was characterized by the advanced characterization techniques. Factors that affected the elimination process such as variable pH, coexistence ions and equilibrium time were investigated by batch techniques. The results showed that the maximal removal capacities of U(VI) and Cr(VI) on DAWP-PT were 242.3 mg/g (pH = 6.0) and 178.7 mg/g (pH = 2.0) at 298 K, which exhibited competitiveness with most of the reported solid materials. Meanwhile, adsorption data were fitted perfectly to the Langmuir and Pseudo-second-order equations, which indicated that the monolayer and homogenous chemisorption dominated the removal process. The SEM-EDX, DFT and XPS analysis conformed that adsorption of U(VI) was mainly via surface complexation, while the elimination of Cr(VI) was a redox reaction process, and about 65.33% of Cr(III) and 34.67% of Cr(VI) co-existed onto the surface of DAWP-PT. Thus, this study would provide a high-efficiency and low-cost adsorbent for radionuclide and heavy metal treatment., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

The sustainable application of an up-flow anaerobic baffled reactor (UABR) to treat real paper and cardboard industrial effluent (PCIE) containing bronopol (2-bromo-2-nitropropan-1, 3-diol) was investigated. At a hydraulic retention time (HRT) of 11.7 h and a bronopol concentration of 7.0 mg L -1 , the removal efficiencies of total chemical oxygen demand (COD total ), COD soluble , COD particulate , total suspended solids (TSS), volatile suspended solids (VSS), carbohydrates, and proteins were 55.3 ± 5.2%, 26.8 ± 2.3%, 94.4 ± 4.6%, 89.4 ± 2.6%, 84.5 ± 3.2%, 72.1 ± 1.8%, and 22.4 ± 1.8%, respectively. The conversion of complex organics (e.g., carbohydrates and proteins) into bio-methane (CH 4 ) was assisted via enzyme activities of, in U (100 mL) -1 , α-amylase (224-270), α-xylanase (171-188), carboxymethyl cellulase (CM-cellulase) (146-187), polygalacturonase (56-126), and protease (67,000-75300). The acidogenic condition was dominant at a short HRT of 2.9 h, where methane yield dropped by 32.5%. Under this condition, the growth of methanogenic bacteria could be inhibited by volatile fatty acids (VFA) accumulation. The analysis of Fourier-transform infrared (FTIR) spectra detected peaks relevant to methylene and nitro groups in the sludge samples, suggesting that entrapment/adsorption by the sludge bed could be a major mechanism for removing bronopol. The economic feasibility of UABR, as proposed to receive 100 m 3  d -1 of PCIE, showed a payback period (profits from environmental benefits, biogas recovery, and carbon credit) of 7.6 yr. The study outcomes showed a high connection to the environmental-, economic-, and social-related sustainable development goals (SDGs)., (Copyright © 2021. Published by Elsevier Ltd.)

A SERS substrate FP/Ag/ZIF-8 composed of filter paper (FP), silver nanoparticles (AgNPs) and zeolitic imidazolate framework (ZIF-8) film arranged in a layered structure was developed for sensitive detection of pesticide thiram in various samples. Roles of these components in analyte adsorption and Raman signal enhancement were studied using a pesticide intermediate 4-Aminothiophenol (4-ATP) as the probe. The substrate showed high adsorption and optimized SERS response with thick metal organic framework (MOF) coating (125 nm), which is different from previous reported plasmonic particle-MOF composite substrate, where thinnest MOF coating produced the strongest SERS signal. Detection limit for 4-ATP improved 1000-fold on FP/Ag/ZIF-8 (3 pM) compared with that on FP/Ag (3 nM). Importantly, the FP/Ag/ZIF-8 with porous and flexible property can efficiently capture pesticide thiram in different real samples using soaking, filtration or swabbing operation. The subsequent SERS detection of thiram showed advantages of low detection limit (soaking, LOD: 0.04 nM in lake water), fast detection (filtration, within 1 min in peach juice) and suitable for curve surface analysis (swabbing, LOD: 0.1 ng/cm 2 on apple peel), respectively. The substrate also displayed good reproducibility, high stability and size-selective response for thiram detection. Such a layered plasmonic particle/MOF hybrid may hold great promise for toxicant analysis in environment and food., (Copyright © 2021. Published by Elsevier Ltd.)

Over the past three decades, groundwater remediation using permeable reactive barriers (PRBs) has proven to be effective. The majority of installed PRBs uses metallic iron (Fe(0)) as a reactive material. However, the success of implemented Fe(0) PRBs is yet to be rationalized as Fe(0) is a generator of iron oxides (contaminant scavengers) and secondary reducing agents (e.g. Fe(II), Fe 3 O 4 , H 2 , green rust), This communication demonstrates that Fe(0) is not an environmental reducing agent. Therefore, more science-based investigations are needed to optimize the operation of Fe(0) PRBs. In particular, Fe(0) PRBs and Fe(0)-based water filters should be regarded as particular cases of "metal corrosion in porous media". A key feature of such systems is that the extent of Fe 0 corrosion temporally depends on the residual porosity (capillarity). Thus, the functionality of any Fe 0 PRB should be monitored in a way that the time-dependent variation of the kinetic of iron corrosion is discussed., (Copyright © 2021. Published by Elsevier Ltd.)

Anaerobic digestion of floated paperboard sludge (PS) cake suffers from volatile fatty acids (VFAs) accumulation, nutrient unbalanced condition, and generation of digestate with a risk of secondary pollution. To overcome these drawbacks, sewage sludge (SS) was added to PS cake for biogas recovery improvement under a co-digestion process followed by the thermal treatment of solid fraction of digestate for biochar production. Batch experimental assays were conducted at different SS:PS mixing ratios of 70:30, 50:50, 30:70, and 20:80 (w/w), and their anaerobic co-digestion performances were compared to the mono-digestion systems at 35 ± 0.2 °C for 45 days. The highest methane yield (MY) of 241.68 ± 14.81 mL/g COD removed was obtained at the optimum SS:PS ratio of 50:50 (w/w). This experimental condition was accompanied by protein, carbohydrate, and VFA conversion efficiencies of 47.3 ± 3.2%, 46.8 ± 3.2%, and 56.3 ± 3.8%, respectively. The synergistic effect of SS and PS cake encouraged the dominance of Bacteroidota (23.19%), Proteobacteria (49.65%), Patescibacteria (8.12%), and Acidovorax (12.60%) responsible for hydrolyzing the complex organic compounds and converting the VFAs into biomethane. Further, the solid fraction of digestate was subjected to thermal treatment at a temperature of 500 °C for 2.0 h, under an oxygen-limited condition. The obtained biochar had a yield of 0.48 g/g dry digestate, and its oxygen-to-carbon (O/C), carbon-to-nitrogen (C/N), and carbon-to-phosphorous (C/P) ratios were 0.55, 10.23, and 16.42, respectively. A combined anaerobic co-digestion/pyrolysis system (capacity 50 m 3 /d) was designed based on the COD mass balance experimental data and biogenic CO 2 market price of 22 USD/ton. This project could earn profits from biogas (12,565 USD/yr), biochar (6641 USD/yr), carbon credit (8014 USD/yr), and COD shadow price (6932 USD/yr). The proposed project could maintain a payback period of 6.60 yr. However, further studies are required to determine the associated life cycle cost model that is useful to validate the batch experiment assumptions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

This critique examines a review article in this journal on adsorption techniques for removing metal ions from wastewater. The article is marred by several flaws, including tortured phrases, miscitations, incoherent statements, and factual inaccuracies. These problems weaken the article's clarity and reliability, raising doubts about the authors' understanding of the subject. As a result, the review's credibility is compromised, limiting its value as a reliable resource for researchers. This critique highlights these issues, stressing the importance of accuracy and rigor in scientific writing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

BPA and its analogues are facing increasingly stringent regulations restricting their use due to the increasing knowledge of their harmful effects. It is therefore expected that novel BPA analogues and alternatives will replace them in plastic products, cans and thermal paper to circumvent restrictions imposed by legislation. This raises concerns about the safety of "BPA-free" products, as they contain BPA substitutes whose safety has not been sufficiently assessed prior to their market introduction. The regulatory agencies have recognised BPAP, BPBP, BPC2, BPE, BPFL, BPG, BPP, BPPH, BPS-MAE, BPS-MPE, BP-TMC, BPZ and the alternatives BTUM, D-90, UU and PF201 as compound with insufficient data regarding their safety. We demonstrate that the mentioned compounds are present in consumer products, food and the environment, thus exhibiting toxicological risk not only to humans, but also to other species where their toxic effects have already been described. Results of in silico, in vitro and in vivo studies examining the endocrine disruption and other effects of BPA analogues show that they disrupt the endocrine system by targeting various nuclear receptors, impairing reproductive function and causing toxic effects such as hepatotoxicity, altered behaviour and impaired reproductive function. In vitro and in vivo data on BPA alternatives are literally non-existent, although these compounds are already present in commonly used thermal papers. However, in silico studies predicted that they might cause adverse effects as well. The aim of this article is to comprehensively collate the information on selected BPA substitutes to illustrate their potential toxicity and identify safety gaps., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

As the adverse effects of using plastics and perfluorinated alkyl substances become more apparent, there is a growing need for sustainable hydrophobic products. Cellulose and its derivatives are the most abundant and widely used polymers, and cellulose-based products have great potential in industries where plastics and other hydrophobic polymers are used, such as stain-resistant fabrics, food packaging, and oil-water separation applications. In this study, we extracted cellulose from water hyacinth (WH) biomass, known for its negative environmental impact, and converted it into hydrophobic cellulose. This addresses the issue of managing WH waste and creating an environmentally friendly hydrophobic material. Initially, aldehyde groups were introduced through oxidation with periodate, followed by direct octadecyl amine (ODA) grafting onto dialdehyde cellulose (DAC) via a Schiff base condensation. The resulting ODA modified cellulose (ODA-C) was dispersed in ethanol and used to coat various materials, including cotton fabric, cellulose filter paper, and packaging paper. The modified materials showed excellent hydrophobicity as measured by their water contact angles (WCAs), and the application of the coating was demonstrated for oil-water separation, stain-resistant hydrophobic fabric, and paper-based packaging materials. FTIR, XRD, and WCA analysis confirmed the successful modification of cellulose. A high separation efficiency of 99% was achieved for diesel/water separation using modified filter paper (MoFP), under gravity. On application of the coating, cotton fabric became hydrophobic and resisted staining from dye, and paper-based packaging materials became more robust by becoming water-resistant. Overall, the facile synthesis, low cost, high efficiency, and use of environmentally friendly sustainable materials make this a promising strategy for hydrophobically modifying surfaces for a wide range of applications while reducing the menace of water hyacinth., Competing Interests: Declaration of competing interest We declare that we have no known competing financial interests or personal relationships that could influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

3D printing technology based electrochemical device can provide ease of fabrication, cost effectiveness, rapid detection and lower limit of detection. Herein, a novel, customized, portable and inexpensive 3D printed electrochemical device, has been presented. Fibrous carbon Toray paper, deposited with gold nanoparticles through electrodeposition, used as a working electrode which Further device was tested with 1 mM sodium hypochlorite using cyclic voltammetry (CV) and square wave voltammetry (SWV) in 0.1 M PBS. Hypochlorite has a pivotal role in supporting the growing chemical and paper industries and finds diverse uses in several clinical applications. It is primarily used for disinfecting food, water and surfaces. The scan rate study was carried out from 20 mVs -1 to 250 mVs -1 using cyclic voltammetry technique. The diffusion coefficient obtained from scan rate effect was 1.39 × 10 -6 cm 2 s -1 . The concentration range was evaluated with SWV technique, in a linear range of 0.6 μM-40 μM, with a detection limit of 0.7 μM. The device was further analyzed to ensure non-interference from co-existing chemicals like sodium chloride, potassium nitrate, sodium carbonate, sodium nitrite. Real sample analysis was done with sea, artificial sea and tap water with impressive recovery values. In summary, the developed working electrode can be customized and modified based on testing analyte; thus, the proposed device can be used for various other biochemical analytes., (Copyright © 2022 Elsevier Ltd. All rights reserved.)

In this study, we investigated for the first time the suitability of supramolecular solvent (SUPRAS)-based microextraction probe for the development of generic and fast sample treatment prior to qualitative analysis by ambient mass spectrometry (AMS) based on ASAP (atmospheric solids analysis probe). SUPRAS are nanostructured liquids formed by the self-assembly of amphiphilic aggregates with multiple binding sites and microenvironments of different polarity for the efficient extraction of multiple compounds. Different types of SUPRAS were evaluated as a simple and single step sample treatment for ASAP. The method was applied to the screening of bisphenol A and structural analogues in thermal paper. Optimal results were achieved with SUPRAS synthesized with 1-decanol in mixtures of ethanol:water. SUPRAS (1.1-2 μL) were loaded onto glass probes and placed in contact with samples for 10 s before ASAP analysis. AMS signal peaks (width: 0.2-0.5 min) were easily integrated and normalized with internal standards (RSD: 2-25%). The method was applied to 62 samples of thermal paper. BPA and BPS were the most widely used, this highlighting the progressive industrial replacement of BPA by BPS., (Copyright © 2022 Elsevier Ltd. All rights reserved.)