Search

Mobile communication base stations have become ubiquitous with the popularization and development of mobile communication services. Although the Chinese government has designated a radio quiet zone (RQZ) specifically for Five-hundred-meter Aperture Spherical radio Telescope (FAST), the 4G International Mobile Telecommunications (4G-IMT) system is still heavily used to meet the communication needs around the RQZ. To assess the Electromagnetic Interference (EMI) caused by 4G-IMT base stations on the performance of FAST, this paper employs the International Telecommunication Union (ITU) deterministic radio wave propagation prediction model. The interference of 4G-IMT base stations on FAST is evaluated based on relevant parameters, such as the frequency used by both FAST and the base station, in conjunction with the FAST threshold protection requirements. The results indicate that 47.73 % of the data exceed the radio astronomy protection threshold of FAST. In addition, a field experiment was conducted to verify the accuracy of the radio wave propagation prediction method used. The root-mean-square error between the predicted value and the measured value was found to be 6.94 dB, supporting the accuracy of the predicted results. The findings of this study can help suppress interference from mobile communication services around the RQZ of FAST and optimize the electromagnetic environment around FAST. [ABSTRACT FROM AUTHOR]

The rapidly increasing number of satellites in Earth's orbit motivates the development of Space Domain Awareness (SDA) capabilities using wide field-of-view sensor systems that can perform simultaneous detections. This work demonstrates preliminary orbit determination capability for Low Earth Orbit objects using the 36 ° × 36 ° field-of-view of the Murchison Widefield Array (MWA) at commercial Frequency Modulated (FM) frequencies (transmitters in 88 - 108 MHz range). Non-coherent passive radar techniques with the MWA produce spatially smeared detections, due to time averaging in the MWA's standard signal processing chain. The work develops methods to extract time-stamped measurements of a satellite's angular coordinates from these data. The developed method was tested on observations of 32 satellite passes and the extracted measurements were used to perform orbit determination for the targets using a least-squares fitting approach. The target satellites span a range in altitude and Radar Cross Section, providing examples of both high and low signal-to-noise detections. The estimated orbital elements for the satellites are validated against the publicly available Two Line Element (TLE) updates provided by the Space Surveillance Network (SSN) and the preliminary estimates are found to be in close agreement. The work also tests for re-acquisition for one target using the orbital elements and finds the trajectory predicted by the method to coincide within 0.2 ° cross-track and 0.3 ° in-track for a subsequent pass, reduced to approximately 0.1 ° cross-track (less than one kilometre) if two passes are used to predict the subsequent pass (using simple two-body propagation). The median uncertainty in the angular position for objects in LEO (range less than 1000 km) is found to be 860 m in the cross-track direction and 780 m in the in-track direction, which are comparable to the typical uncertainty of ∼ 1000 m in the publicly available TLE information. The techniques, therefore, demonstrate the MWA to be capable of being a valuable contributor to the global SDA community. Based on the understanding of the MWA SDA system, this paper also briefly describes methods to mitigate the impact of FM-reflecting LEO satellites on radio astronomy observations, and how maintaining a catalog of FM-reflecting LEO objects is in the best interests of both SDA and radio astronomy. [ABSTRACT FROM AUTHOR]

Delingha 13.7 m telescope is one of the most important radio telescopes in China. Since installing the superconducting spectroscopic array receiver (SSAR) and adopting the On The Fly (OTF) observation mode, the telescope has operated for nearly 10 years. During this period, a large number of astronomical observation projects have been carried out and completed, a large amount of astronomical data have been accumulated, and a series of important scientific results have been achieved. This paper introduces the operating status of SSAR in astronomical observations, the problems in operations, as well as the fault phenomena and solutions. The performance test and performance analysis of SSAR are described in detail, including the receiver noise temperature and telescope system noise temperature, image rejection ratio (IRR), receiver stability, beam performance and so on. The updating and development of SSAR are listed, including the automatic adjustment of LO (Local Oscillator) power, the updating of pre-amplification circuits of the sideband separation superconducting mixer, and the optimization of control program, etc. This paper summarizes the experiences and rules, and connects the past with the future, for applying the experiences of the maintenance and operation of SSAR to the next-generation large-scale receiver system. [ABSTRACT FROM AUTHOR]

This paper describes the design and experimental behavior of a 2nd iterated modified Square Ring Shaped Fractal Antenna (SRSFA). The radiator geometry consists of three symmetrical square-shaped rings loaded with circular patterns at the corners. The designed fractal patch is placed on a slot loaded ground structure. The electrical dimensions possessed by the realized structure are 0.15λ 0 x 0.15λ 0 x 0.080 λ 0 , and the whole antenna is implemented using FR4 substrate. In this design, transmission line width 'W F ' and position 'F P ' are optimized using Shuffled Frog Leaping Algorithm (SFLA) and Artificial Bee Colony (ABC) strategies. It has been examined that the optimized values of 'W F ' and 'F P ' using SFLA and ABC are 2.6 and 12.4 mm, and 3.2 and 15.9 mm, respectively. Results reveal that SFLA offers better solution quality and convergence speed than ABC. Further, experimental analysis has been demonstrated to effectively illustrate the recommended fractal approach. The equivalent circuit of the designed structure is implemented successfully. The conducted measurements show that for VSWR ≤ 2, the fabricated structure produces six resonance points with adorable S11 values. The resonances appear at 1.53 GHz (1.35–1.67 GHz), 4.30 GHz (4.20–4.40 GHz), 7.58 GHz (7.43–7.70 GHz), 11.35 GHz (10.37–11.58 GHz), 14.03 GHz (13.85–14.35 GHz), and 15.93 GHz (15.43–16.25 GHz). The examined −10 dB impedance bandwidth at the respective resonance points is 20.9 %, 4.6 %, 3.5 %, 11.3 %, 2.9 %, and 5.23 %. Healthy concordance is noticed among the experimental measurements and electromagnetic simulations. The demonstrated radiation patterns are arbitrary bidirectional/omnidirectional at the respective resonances with good stability. Additionally, the offered gain is within the range of 4.91–7.00 dB. Hence, by utilizing the above-mentioned approaches, miniaturization of 65 % has been achieved. Practical outcomes suggest that the introduced prototype exhibiting multiband behavior, can be effectively applied in Radio location, Radio astronomy, Long-range tracking, Weather location Broadcasting, Search for extra-terrestrial intelligence, Radar altimeters, High resolution mapping, Aeronavigation, and Miscellaneous Radars. [ABSTRACT FROM AUTHOR]

Radio astronomy and Space Infrastructures in the Azores have a great scientific and industrial interest because they benefit from a unique geographical location in the middle of the North Atlantic allowing a vast improvement in the sky coverage. This fact obviously has a very high added value for: i) the establishment of space tracking and communications networks for the emergent global small satellite fleets ii) it is invaluable to connect the radio astronomy infrastructure networks in Africa, Europe and America continents using Very Large Baseline Interferometry (VLBI) techniques, iii) it allows excellent potential for monitoring space debris and Near Earth Objects (NEOs). There is in S. Miguel island a 32-metre SATCOM antenna that could be integrated in advanced VLBI networks and be capable of additional Deep Space Network ground support. This paper explores the space science opportunities offered by the upgrade of the S. Miguel 32-metre SATCOM antenna into a world-class infrastructure for radio astronomy and space exploration: it would enable a Deep Space Network mode and would constitute a key space facility for data production, promoting local digital infrastructure investments and the testing of cutting-edge information technologies. Its Atlantic location also enables improvements in angular resolution, provides many baselines in East–West and North–South directions connecting the emergent VLBI stations in America to Europe and Africa VLBI arrays therefore contributing for greater array imaging capabilities especially for sources or well studied fields close to or below the celestial equator, where ESO facilities, ALMA, SKA and its precursors do or will operate and observe in the coming decades. [ABSTRACT FROM AUTHOR]

In this paper, a wideband high gain Vivaldi antenna based on spoof surface plasmon polaritons metamaterial for radio astronomy application is proposed. The height of the spoof surface plasmon polaritons structures fits the exponential function, thus the structure is named exponential spoof surface plasmon polaritons (ESSPP) metamaterial. With the exponential heights, the ESSPP metamaterial could correct the phase difference in a wide band, the gain is improved in the wide frequency range from 3 GHz to 9 GHz, and the proposed antenna exhibits stable radiation patterns with an average gain of 10.6 dBi. [ABSTRACT FROM AUTHOR]

Gridding is the performance-critical step in the data reduction pipeline for radio astronomy research, allowing astronomers to create the correct sky images for further analysis. Like the 2D stencil computation, gridding iteratively updates the output cells by convolution, where the value at each output cell in the space is computed as a weighted sum of neighboring point values. Existing state-of-the-art works have achieved performance improvement of gridding by using multi-core CPUs and GPUs in real-world applications, and their study proved that gridding is a type of scientific computation with high-density computing characteristics. However, low computational performance or high power consumption becomes the main limitation for their processing of large-scale astronomical data. The high-density computing feature of gridding provides opportunities to accelerate it on the multi-core vector processor with vector-SIMD architectures. However, existing works' (such as those implemented on CPUs or GPUs) task parallelization and data transfer strategies are inefficient to perform gridding directly on the vector processor without any dedicated mapping algorithm. M-DSP is a multi-core vector processor with vector-SIMD architectures designed for the next-generation exascale supercomputer, delivering high performance with ultra-low power consumption. In this paper, we present, for the first time, a novel method to achieve efficient gridding on the M-DSP. Specifically, we propose a gridding workflow designed for the vector-SIMD architectures and present a vectorized version of the gridding convolution algorithm to fully exploit the computational power of the M-DSP. In addition, centering on the processor architectures, we propose task-based parallelization strategies for block and line computing as well as different data loading strategies to achieve high parallel performance and high data transfer efficiency. Experimental results show that our work on M-DSP exhibits very competitive performance compared to other methods running on CPUs or GPUs. This demonstrates the efficiency of our method and the fact that the vector-SIMD architecture is beneficial for scientific computing with "high density" characteristics, which can exploit its wide vector core and achieve higher performance than its competitors. [ABSTRACT FROM AUTHOR]

• Calibration algorithm of a radio telescope in the presence of man-made radio waves. • Array signal processing model that considers the presence of interferences. • Maximum likelihood estimation of the model parameters. • Development of a Space Alternating Generalized Expectation-Maximization algorithm. Radio interferometers are phased arrays producing high-resolution images from the covariance matrix of measurements. Calibration of such instruments is necessary and is a critical task. This is how the estimation of instrumental errors is usually done thanks to the knowledge of referenced celestial sources. However, the use of high sensitive antennas in modern radio interferometers (LOFAR, SKA) brings a new challenge in radio astronomy because they are more sensitive to Radio Frequency Interferences (RFI). The presence of RFI during the calibration process generally induces biases in state-of-the-art solutions. The purpose of this paper is to propose an alternative to alleviate the effects of RFI. For that, we first propose a model to take into account the presence of RFI in the data across multiple frequency channels thanks to a low-rank structured noise. We then achieve maximum likelihood estimation of the calibration parameters with a Space Alternating Generalized Expectation-Maximization (SAGE) algorithm for which we derive originally two sets of complete data allowing closed-form expressions for the updates. Numerical simulations show a significant gain in performance for RFI corrupted data in comparison with some more classical methods. [ABSTRACT FROM AUTHOR]