Search

This paper proposes a multi-electrolyzer switching scheduling strategy based on the Pelican Optimization Algorithm (POA) to enhance the efficiency of large-scale wind power hydrogen production systems. To validate the effectiveness of the proposed strategy, we analyzed wind power data from three typical days in northern Hebei, China, with a 2.5 MW wind turbine output. We designed three strategies for comparative analysis: a simple start-stop strategy, a rule-based multi-electrolyzer switching strategy, and a POA-based multi-electrolyzer switching strategy. The study results demonstrate that the POA-based strategy exhibits higher hydrogen production efficiency and system stability under various wind conditions. Particularly, in extreme wind scenarios, this strategy significantly reduces the start-stop cycles of electrolyzers, thereby lowering operational costs and improving overall system performance. The main contribution of this study lies in the novel optimization algorithm and its validation through real-world data, demonstrating its effectiveness in large-scale wind power hydrogen production systems. Our findings provide new insights for enhancing the utilization of renewable energy and the economics of hydrogen production systems. [ABSTRACT FROM AUTHOR]

Integrating electric vehicles (EVs) into the electric power system poses significant challenges to grid operation and planning due to the potential constraints on the power system. To minimize grid congestion, the best option is to increase the production of photovoltaic (PV) energy for domestic use and EV charging stations. This paper addresses the nexus of technical, financial, and environmental effects of customer involvement in economic development and load management. In this paper, a new model design of solar-powered EV charging stations is proposed and implemented in HOMER Grid, and a case study has explored how economic, technical, and energy management benefits can be achieved through customer energy involvement and the integration of PV-based charging stations. The proposed PV-based charging stations contribute toward the energy management of the region, and the study observes the real-time optimal charging and discharging strategy of PV-based grid-connected charging stations. The case study results show that the investigated area can produce 1,070,804.096 MWh/year of energy through maximum customer involvement, consequently reducing overall energy costs. Moreover, the study demonstrates that the selected region can produce 86,961,688 kWh/year through the PV system, achieving 363,899 charging sessions per year, offering maximum advantages and facilitation for EV charging. The proposed model applicability shows that large-scale customer involvement can bring significant techno-economic benefits and attract regional investments. • This paper proposes a new design of a grid-tied renewable energy system. • It investigates the energy economics and environmental effects for a practical location. • The research examines energy management including PV systems and electric vehicles. • The results of proposed model are compared with other models. [ABSTRACT FROM AUTHOR]

The production of electrical energy is always a substantial contributor to a country's economy; in particular, integrating renewable energy sources into the existing power system has tremendous techno-economic implications. However, the optimal penetration of renewables and dynamic loads management is highly complex while considering the multiple variables, time-varying characteristics, and operational uncertainties. This paper proposes a new model design of a grid-tied renewable system. It investigates energy economics and forecasts for the practical locality of the Muzaffarabad area in Azad Jammu and Kashmir. The proposed research examines the annualized energy estimation concerning varied customer PV system participation. The impact of consumer feedback on energy production is briefly examined. Various aspects, such as energy economics, including annual revenue generation, energy prices, and energy sell-back, are demonstrated in detail. The proposed study also looks at the connection between the rising usage of renewable energy and falling greenhouse gas emissions and energy prices. Moreover, it shows how customer input has altered energy economics via each district taking part in energy sharing. Also, it illustrates the relationship between energy bought and sold and how the grid and PV's share of energy interact. Based on the research study findings, PV systems can provide 61% of the total region's energy needs with maximum consumer involvement. The study found that when PV is integrated at a maximum level, grid energy purchases fall to 52%. Polluting gas emissions were reduced by 64% courtesy of the recommended approach, and energy cost was cut from $0.20 per kWh to $0.09 per kWh. The recommended system produces 81,635,608 dollars in revenue yearly and achieves a renewable part of 46.17% with the highest level of customer interaction. [Display omitted] • This paper proposes a new model design of a grid-tied renewable system. • It investigates the energy economics and forecasts for a practical location. • The research examines annualized energy estimation concerning PV systems. • The results of proposed model are compared with other models. [ABSTRACT FROM AUTHOR]

[Display omitted] • PCM energy storage and PV/T coupled multi-source heat pump systems were combined. • The thermal performance, energy efficiency, and economy of the system were analyzed. • The performance of paraffin C17 and water as energy storage materials were compared. • The performance of six low-temperature PCMs applied to the system were analyzed. • Compared to the existing system, it saves 56 % of energy and 27.7 % of operating costs. To improve the application of renewable energy in the heating zone, as well as to address the limitations of air and water source heat pump. The study presents a PV/T (photovoltaic/thermal) coupled air–water source heat pump system integrated with phase change energy storage. A theoretical analytical model and TRNSYS simulation model of the system were developed to evaluate the thermal performance, energy efficiency and economics of the system. The performance of phase change energy storage was compared with that of water storage, and the effect of different phase change materials on the system characteristics. The results show that the coupled system achieves a seasonal performance factor of 2.3, a 56 % reduction in energy consumption, and a 27.7 % reduction in operating costs compared to a conventional gas boiler system. Comparative analysis with the water storage system showed that the system equipped with phase change materials performed well in terms of energy consumption, operating costs and heating stability. In addition, the density of the phase change material has a biased effect on the overall performance of the system. This paper can provide a reference value for the study of renewable energy heating systems in cold zone. [ABSTRACT FROM AUTHOR]

The increasing greenhouse gas (GHG) emission and environmental degradation (ED) is a serious concern for the various economies, and a similar issue is observed in Asia. This paper investigated the role of clean energy from renewable sources, urbanization, and economic growth in determining the level of GHG emissions from 1995 to 2018 for ten Asian States through a cross-sectional autoregressive distributed lagged (CS-ARDL) model. Meanwhile, the current research also examined the cross-sectional dependence, unit root properties, and co-integration between the study variables. The study findings confirmed that clean energy and GDP2 played their constructive role in reducing GHG emissions in the natural environment or targeted economies. In contrast, urbanization and economic growth caused more GHG emissions both in the long and short run. Furthermore, the robust check through augmented mean group (AMG) and common correlated effect means group (CCEMG) also confirmed that clean energy and GDP2 have a good sign for lowering ED compared to GDP and urbanization. The study findings could support policymakers, specifically in the field of energy economics and environmental sustainability. Therefore, it is highly recommended that some strong policy implications are needed to reduce environmental issues through controlling the negative impact of economic growth and urbanization. This study contributes in the literature of GHG emission with respect to economic growth, urbanization and clean energy and guided the regulators while formulating policies related to control the GHG emission. • The increasing GHG emission is a serious concern for the various economies. • We examined the clean energy, urbanization and economic growth impact on GHG emissions. • We examined cross-sectional dependence, unit root and cointegration among variables. • Clean energy plays constructive role in reducing GHG emissions in natural environment. • Urbanization and economic growth caused more GHG emissions in long and short run. [ABSTRACT FROM AUTHOR]

In the last decade, the significant level of carbon emission in the atmosphere has increased the temperature of the Earth by 50% compared to the pre-industrial period. In recent years, considering renewable energy sources integrated with different energy systems such as cooling, heating, and power has become widespread around the globe as the ambition is to produce sustainable and clean energy. However, as the conventional methods for energy generation are highly reliable, their usage for supplying energy demands is inevitable. Therefore, in such renewable-based generation systems, the issues arising from uncertainties are the main challenges to the high penetration of these technologies. In this paper, the aim is to appraise such challenges in a multi-energy combined heat and power (CHP)-based microgrid integrated with power-to-gas (P-2-G) technology. In the proposed system, the downside risk constraint (DRC) approach as an effective risk management method is considered for risk assessment. The proposed model is a mixed integer linear program that is modeled as a multi-objective risk-based problem, for which the epsilon constraints method is used to achieve the optimal solutions for the objectives. According to the results, using P-2-G as an environmentally friendly tool can reduce approximately 55% of the emission cost. Further, the operating cost is increased nearly 13% to obtain a zero-risk condition for optimal management. [Display omitted] • Risk-constrained emission reduction and flexibility improvement in the fossil-fueled CHP-based multi-vector system. • A stochastic-based risk-aware multi-objective optimization framework with iterative solution mechanism. • Risk analysis with downside risk constraint (DRC) approach for the multi-vector uncertainties. [ABSTRACT FROM AUTHOR]