Search

• An innovative dew point cooling system was designed, constructed, installed and real live tested in live data centre. • The system can provide continuously stable cooling air and maintain the required temperature and humidity in data centre. • The average COP of 29.7 was achieved during the testing period. • 90 % energy saving can be achieved for data centre cooling. • Suitability, stability and reliability of the system used in data centre environment were proved. This paper presents the development and application of a super performance dew point cooling technology for data centres. The novel super performance dew point cooler showed considerably improved energy saving and carbon reduction for data centre cooling. The innovations of this technology are built upon a series of technological breakthroughs including, a novel hybrid flat/corrugated heat and mass exchanging sheets, an innovative highly water absorptive and diffusive wet-material for the sheets which enable an intermittent water supply with well-tuned water pressure and flow rate, and the optimised fan configurations. Following a list of fundamental research including theoretical, numerical and lab experimental testing of a small scale prototype system, a specialist 100 kW rated data centre dew point cooling system was dedicated designed, constructed, installed and real life tested in an operational live data centre environment, i.e., Maritime Data Centre at Hull (UK) to investigate its dynamic performance, suitability and stability for application in operational data centre environment conditions. During the testing period, the system showed its reliability and capability to remove a tremendous amount of heat dissipated from the IT equipment and maintain an adequate space temperature in the operational live data centre. The dynamic data collection and analysis during the continuous testing and monitoring period showed the average COP of 29.7 with the maximum COP of 48.3. Compared to the existing traditional vapor compression air conditioning system in the data centre, the energy saving using the super performance dew point cooling system is around 90 %. The work presented in this paper include detailed innovation aspects of the technology and the system operation, as well as the established bridging knowledges, methodology and technical procedure for bringing this new technology into real life operation which involve in data centre survey, optimum design and modularization of the specialist cooling system for data centre application, proven system installation, operating method and cooling air management for data centre as well as the assurance of the continuous sufficient cooling supply to the data centre. [ABSTRACT FROM AUTHOR]

Energy efficiency is a critical issue in data centre management, which is the foundation for cloud computing. The VM placement has a considerable impact on a data centre's energy efficiency and resource utilisation. The assignment of VMs to PMs is an NP-hard problem without an easy way to find an optimal solution, particularly in large-scale data centres. In this study, the VM placement problem is formulated as a constrained optimisation problem. The Genetic Algorithm (GA) is a suitable method for solving this problem in terms of the quality of the solution. However, GA is time-consuming to obtain an optimal solution in the large scale optimisation problem. Therefore, this paper focuses on accelerated GA for energy-efficient VM placement. As the most time-consuming element of the GA is the calculation of its fitness function, this paper simplifies this calculation through a new fitness function in GA. Simulation results of small-, medium-, and large-scale data centres demonstrate that our accelerated GA is faster than the standard GA and gives better quality of solution than the First Fit Decreasing (FFD) algorithm, respectively. The findings of our GA with the new fitness function reveal an 8% energy saving for our GA compared to FFD and a 66% reduction in our GA execution time compared to the standard GA with standard energy formula as a fitness function. The number of generations in our GA is reduced by about 50% in comparison with the standard GA. Moreover, we started with 3000 PMs in the large-scale dataset, and only 1086 PMs were actually used after running our GA. Therefore, we may switch off far more PMs for energy savings from our GA results than those from the standard GA. • Virtual machine placement problem formulated as a constrained optimisation problem. •It focuses on accelerated genetic algorithm for virtual machine placement. •Our algorithm can minimise residual resources using Taylor extension. •Our solution quality is better than FFD and standard genetic algorithm. •It reduces execution time and energy in large scale data centres. [ABSTRACT FROM AUTHOR]

Heat pipe, a high efficient, cost effective and reliable device, is considered one of the most promising passive technologies for cooling data centres. Aiming to provide comprehensive information and focused perspective on heat pipe system for cooling data centres, the literature reviewed in this review is obtained from the Web of Science by searching the topic "heat pipe" and "data centre" conducted on Sep. 1, 2019 for the decade from 2009 to 2018. In this paper, a comprehensive review on heat pipes for use in data centre cooling systems will be carried out, starting from the working principle, heat transfer analysis and applications. The review works will be analysed in terms of the system research methodology, energy performance evaluation, and IT tasks. From the system research methodology, the heat pipe structure, simulation and testing analyses were conducted. From the energy performance evaluation, the energy consumption, energy recovery and energy saving analyses were studied. From the IT tasks, the avoidance of hot spots and thermal management in the data centres were analysed. The opportunities for further works are revealed including: developing new and efficient data centre cooling systems employing advanced technology; optimising the heat pipe structure for the data centre cooling systems; testing the data centre cooling systems under actual conditions; and evaluating the economic feasibility and market potential of the data centre cooling systems. This review provides the guidelines for the development of data centre cooling system based on the heat pipe. • The heat pipe systems for cooling data centres are summarized from the research methodology, energy performance evaluation, and IT tasks. • Opportunities of data center cooling system based on the heat pipe are emphasized. • The evaluation of economic feasibility and market potential of the data centre cooling systems based heat pipe is needed. • Further tests of the data centre cooling systems in real environment should be carried out. [ABSTRACT FROM AUTHOR]