Search

[Display omitted] • A simple but powerful solution to overcome the chronic bottleneck of the nanocatalyst delivery on oxide support: the carbothermal shock driven nanocatalyst formation on carbon nanofibers (CNFs) with small sizes and fine distribution can be delivered to oxide structures of choice while retaining high uniformity. • Fabrication of catalyst delivered porous oxide structures: the asymmetric sputtering of oxide on CNFs can induce the formation of openly porous hemi-tubular structures with tunable porosity and thickness. A simple subsequent calcination results in the transfer of catalysts from the CNF template to the porous oxide structures. • Superior hydrogen sulfide sensing properties: Uniform distribution of Pt nanoparticles on SnO 2 hemitubes showed superior H 2 S sensing performances (Response Rair/Rgas > 1500 at 5 ppm H 2 S) compared to state-of-the-art H 2 S sensors. To achieve powerful gas sensors oxide semiconductor chemiresistors, the uniform functionalization of nanocatalysts on the desired metal oxides is considered as a key strategy. However, still, it is challenging to achieve the nanocatalysts decoration on desired oxides without deterioration of target materials. In this study, thermal-shock (rapid joule-heating method) was applied to uniformly decorate Pt nanoparticles (NPs) on the surface of carbon nanofibers (CNFs) to achieve the uniform distribution of Pt NPs on one-dimensional structures. And then, SnO 2 was physically deposited on the Pt NPs loaded CNFs and continuous heat-treatment was conducted to transfer the Pt NPs to desired SnO 2 porous hemitubes. Thanks to the well-distributed Pt NPs on porous SnO 2 hollow structures, the Pt laoded SnO 2 hemitubes showed an exceptional sensitivity (R air /R gas = 1500 at 5 ppm) in H 2 S. Also, it showed high selectivity for H 2 S and high stability even under continuous gas exposure, confirming its potential as an effective H 2 S sensor. [ABSTRACT FROM AUTHOR]

• Synthesis of CA-CNF by insulating block electrospinning & carbonization. • Formation of cross-aligned network even after heat treatment. • Faster reaction kinetics and regular electron pathway of CA-CNF. • High-rate cyclability of CA-CNF (259.4 mAh g−1 at 3000 mA g−1). The conventional use of metallic current collector in an electrochemical cell results in decreased loading of active materials and hence limited capacity in consideration of all the inactive current collector components. In response to this trend, a number of conductive, free-standing materials have been proposed as electrodes, which would act as both current collector and active materials. Here, in this study, we have firstly developed the cross-aligned carbon nanofiber (CA-CNF) for efficient Li storage, especially at high current densities. Using the insulating block electrospinning, the nanofibers can be aligned in a certain direction, where it is viable to fabricate cross-aligned nanofibers in a cost-effective and scalable manner. Attributed to faster kinetics and regular electron pathway arising from CA-CNF, it exhibits an excellent high-rate cyclability (259.4 mAh g−1 at a current density of 3000 mA g−1). This work builds up a milestone in suggesting a cross-aligned carbon nanofibrous network as efficient Li storage, which can also be applied to various electrode materials embedded cross-aligned conductive composite materials. [Display omitted] [ABSTRACT FROM AUTHOR]