Search

This paper investigates the influence of ZnCl 2 on the gamma attenuation and radiation shielding properties of tellurite glasses incorporating Bi 2 O 3 and B 2 O 3. Employing Geant4 simulation and XCOM program, the study explores the impact of varying ZnCl 2 content on different gamma attenuation parameters such as linear attenuation coefficient (μ), radiation protection efficiency (RPE), effective atomic number (Z eff), and HVL. Moreover, the relation between these factors and the density of the studied glass system is discussed in details. It is found that the incremental addition of Bi 2 O 3 significantly enhanced the photon attenuation properties of the tellurite glasses involved. The maximum Zeff values are observed at the low energy region between 0.015 and 0.1 MeV with the values of 53.016, 60.133, 65.950, 70.370, and 73.791 for the glass samples namely TBBZC1, TBBZC2, TBBZC3, TBBZC4, and TBBZC5, respectively. Furthermore, the HVL values fall between 0.0016 cm and 4.3546 cm indicates that the current glass system can be utilizes for gamma shielding applications. The results provide insights into the potential enhancement of radiation shielding efficiency in tellurite glasses, contributing valuable knowledge for the development of advanced materials in nuclear safety applications. • Radiation protection of TeO 2 –ZnCl 2 –B 2 O 3 –Bi 2 O glass system. • Significant influence of ZnCl 2 on the radiation shielding. • Monte Carlo simulations are employed. • A good agreement between the theory and the simulation. • TBBZC5 system has a potential use in nuclear and medical applications. [ABSTRACT FROM AUTHOR]

Four sulfide compounds' attenuation features of gamma-ray (Ag 2 ZnSnS 4 , Ag 2 ZnSnSe 4 , ZnS, and Ag 2 S) were described in this paper by a new software Phy-X/PSD. We calculated radiation attenuation parameters for the selected samples for a broad range of energies (0.015–15 MeV), including linear attenuation, the mean free path, the half-value layer, and total atomic and electronic cross-sections. The effective atomic number and the effective conductivity were also analyzed to investigate the radiation attenuation features. Also, the analyzed samples' buildup factors were studied. The samples' parameters were compared to materials frequently used to shield against radiation, including ferrite, chromite, barite, magnetite, and RS (253 G18, 360, 520) glass. Due to MFP and HVL values, Ag 2 S has better attenuation features than all the other samples utilized in the comparison. Fast neutron removal cross-sections (FNRCS) were also studied, and the best neutron attenuation composite among the samples under study, according to the FNRCS data, is Ag 2 S (0.116 cm−1). [ABSTRACT FROM AUTHOR]

This paper evaluates the γ-radiation shielding traits of some new types of borate glasses of composition (70–x)B 2 O 3 –10Bi 2 O 3 –10BaO–10CdO–xPbO (where 0 ≤ x ≤ 20 mol%) prepared using melt quenching method. As-quenched samples were characterized to determine the effects of various PbO contents on their γ-radiation shielding properties. XRD patterns of the samples verified their amorphous nature. The Phy-X and XCOM was used to compute the mass attenuation coefficients of the glasses and then compared with the experimental data. The γ-radiation shielding performance of the proposed glasses were evaluated in terms of diverse attenuation parameters like mean free path, half and tenth value layer, atomic cross-section, electronic cross-section, effective atomic number and effective electron density. The γ-radiation shielding performance of the glasses were significantly improved with the increase of PbO contents. This new borate glass system is established to be advantageous for the radiation shielding applications. • The borate glass samples with different PbO content were prepared by the standard melt-quenching method. • The μ/ρ values of the glasses were increased with the increase of the PbO content. • The relatively higher Zeff at lower energies due to the dominance of PE effect. • Promising HVT and TVL achieved with the new prepared glasses. • The proposed glass improves the efficiency of IR shielding material. [ABSTRACT FROM AUTHOR]

The paper describes the effect of high effective atomic number (Z eff) materials loading in polystyrene based thin-film Plastic Scintillators (PS). Thin plastic scintillator sheets have been loaded with high Z materials such as BaFBr:Eu, Gd 2 O 2 S:Tb, Gd 2 O 3 , BaF 2 , CeO 2 and Bi 2 O 3. Polystyrene based PS sheets of 250 ± 50 μ m thickness have been prepared by dissolving predetermined quantities of polystyrene, 2,5-Diphenyloxazole (PPO) and 1,4-bis(5-phenyl-2-oxazolyl) benzene (POPOP) in the p-xylene solvent. High Z eff material powders of 23 μ m size are mixed in the plastic scintillator solution and coated over the cellulose acetate-based transparency sheets. The dried films are peeled off, and their photoluminescence, radioluminescence, pulse height spectrum and response to alpha, beta, gamma and neutron radiations are studied by adopting suitable methods. The high Z eff materials for loading in PS are selected based on their physical properties like refractive index, bandgap, Z eff , Photoluminescence (PL) properties. While the composite scintillator loaded with 14.3 wt% of BaFBr:Eu2+ showed significant increase compare to other high Z materials. The loading concentration has been optimized as 14.3 wt% from the BaFBr:Eu2+ studies. Most of the composite scintillators showed improvement in radioluminescence and pulse height spectra for different radiations. • Polystyrene based thin plastic scintillator have been prepared by solvent-based fabrication method. • Thin composite plastic scintillator are studied with high Z eff material loading. • High Z eff material loaded composite scintillators showed enhanced response to radiation. • BaFBr:Eu loaded composite PS has shown the best promising result. [ABSTRACT FROM AUTHOR]