Search

The excessive water sensitivity of hydroxypropyl methylcellulose (HPMC) films prevent them from being used extensively. In order to overcome this limitation, superhydrophobic HPMC films were meticulously crafted through the utilization of a composite of polydimethylsiloxane (PDMS) and ball-milled rice starch, corn starch, or potato starch (RS/CS/PS) for the coating process. Initially possessing hydrophilic properties, the HPMC Film (CA = 49.3 ± 1.8°) underwent a transformative hydrophobic conversion upon the application of PDMS, resulting in a static contact angle measuring up to 103.4 ± 2.0°. Notably, the synergistic combination of PDMS-coated HPMC with ball-milled starch demonstrated exceptional superhydrophobic attributes. Particularly, the treated HPMC-based film, specifically the HP-CS-2 h film, showcased an impressive contact angle of 170.5° alongside a minimal sliding angle of 5.2°. The impact of diverse starch types and the ball milling treatment on the PDMS/starch coatings and HPMC film was thoroughly examined using scanning electron microscopy (SEM), wide-angle X-ray diffraction (WAXS), and particle size analysis. These studies demonstrated that the low surface energy and roughness required for the creation of superhydrophobic HPMC-based films were imparted by the hierarchical structure formed by the application of PDMS/ball-milled starch. Polydimethylsiloxane (PubChem CID: 24764); Hydroxypropyl methylcellulose (PubChem CID: 671); Ethyl acetate (PubChem CID: 8857). [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] • Critical melting with freeze–thaw (CMFT) can be used as a clean-label way to prepare porous starch. • Partial weakening of structure before FT is critical for porous starch formation. • Freezing rates determined the pore-forming characteristics of starch. • CMFT-prepared porous starch had more ordered double-helical structures. • CMFT significantly increased the thermostability and water/oil absorption of starch. In this work, critical melting (CM) combined with freeze-thawing treatment (FT, freezing at −20 ℃ and −80 ℃, respectively) was used to prepare porous starch. The results showed that CM combined with the slow freezing rate (−20 ℃) can prepare porous starch with characteristics of grooves and cavities, while combined with the rapid freezing rate (−80 ℃) can prepare with holes and channels, especially after repeating FT cycles. Compared with the native counterpart, the specific surface area, pore volume, and average diameter of CMFT-prepared porous starch were significantly increased to 4.07 m2/g, 7.29 cm3/g × 10−3, and 3.57 nm, respectively. CMFT significantly increased the thermal stability of starch, in which the To, Tp, and Tc significantly increased from 63.32, 69.62, and 72.90 (native) to ∼69, 72, and 76 °C, respectively. CMFT significantly increased water and oil absorption of porous starch from 91.20 % and 72.00 % (native) up to ∼163 % and 94 %, respectively. Moreover, CMFT-prepared porous starch had a more ordered double-helical structure, which showed in the significantly increased relative crystallinity, semi-crystalline lamellae structure, and the proportion of the double helix structure of starch. The synergistic effect of melting combined with ice recrystallization can be used as an effective way to prepare structure-stabilized porous starch. [ABSTRACT FROM AUTHOR]

In this study, rice starch (RS) was mixed with varying amounts of rice protein (RP; 0 % to 16 %) to explore the effects of protein on the gelatinization and retrogradation of starch during storage. The increased RP addition decreased the viscosity and gelatinization enthalpy of the mixtures but caused an upward trend in the gelatinization temperature, indicating that protein hampers the process of starch gelatinization. Furthermore, RP addition reduced gel hardness, decreased retrogradation enthalpy and crystallization rate constant, but increased Avrami exponent upon RS retrogradation. RP addition also facilitated the mobility of water molecules, weakened the conversion from bound water to free water in the gels, and moderately increased the uniformity and thickness of gel shape. In summary, RP had a dose-dependent effect on the gelatinization and retrogradation behavior of RS, although the anti-retrogradation concentration effect strongly weakened at protein levels exceeding 12 %. It is noteworthy, that excessive RP addition resulted in disulfide bond formation, which increased gel strength and network structure but reduced the ability of RP to facilitate water molecule mobility and restrict water migration, ultimately reducing its anti-retrogradation capability. This phenomenon can be partially attributed to spontaneous protein-protein interaction caused by excessive protein addition, replacing the starch-protein interaction. [ABSTRACT FROM AUTHOR]

In this study, rice starch (RS) was mixed with varying amounts of rice protein (RP; 0 % to 16 %) to explore the effects of protein on the gelatinization and retrogradation of starch during storage. The increased RP addition decreased the viscosity and gelatinization enthalpy of the mixtures but caused an upward trend in the gelatinization temperature, indicating that protein hampers the process of starch gelatinization. Furthermore, RP addition reduced gel hardness, decreased retrogradation enthalpy and crystallization rate constant, but increased Avrami exponent upon RS retrogradation. RP addition also facilitated the mobility of water molecules, weakened the conversion from bound water to free water in the gels, and moderately increased the uniformity and thickness of gel shape. In summary, RP had a dose-dependent effect on the gelatinization and retrogradation behavior of RS, although the anti-retrogradation concentration effect strongly weakened at protein levels exceeding 12 %. It is noteworthy, that excessive RP addition resulted in disulfide bond formation, which increased gel strength and network structure but reduced the ability of RP to facilitate water molecule mobility and restrict water migration, ultimately reducing its anti-retrogradation capability. This phenomenon can be partially attributed to spontaneous protein-protein interaction caused by excessive protein addition, replacing the starch-protein interaction. [ABSTRACT FROM AUTHOR]

[Display omitted] • Partial gelatinization and freeze-thawing significantly modified the properties of waxy maize starch. • The addition of xanthan gum enhanced these effects of physical treatments. • Treatments affected inner structure and chain arrangement of starch. • Treatments improved the pasting properties and produced a short and cohesive paste. • Treatments increased the gelling ability and stability to freeze-thawing cycles. To improve the pasting and gelling behaviors of waxy maize starch, an aqueous dispersion with or without xanthan gum was subjected to partial gelatinization (5 ℃ above the onset melting temperature of starch) and freeze-thawing treatment. After the treatments, starch granules were slightly deformed, with partial loss of birefringence, and tended to aggregate. The relative crystallinity and thermal stability of waxy maize starch crystals decreased by the treatments. These changes indicated that the treatment affected the inner structure and chain arrangement of the granules. The treated waxy maize starches, however, showed a higher overall pasting viscosity with shorter and more cohesive pastes than that of the native starch. The treated starches formed rigid gels with increased stability against freeze-thawing. The addition of small amounts of xanthan gum enhanced the effects of the treatments. [ABSTRACT FROM AUTHOR]