Search

Vitrified-bond diamond composites are materials commonly used for grinding wheels in the grinding process of silicon wafer production. In this study, the mechanism of the in situ honeycomb structure formation in the sintering process of composite materials was explored by changing the binder content without adding a pore-forming agent.The results show when the content of vitrified bond is 55 wt%, the in situ honeycomb structure forms, resulting in a porosity of 60.68 % and bending strength of 23.03 MPa.The X-ray diffraction (XRD), Raman spectroscopy (RS), and thermogravimetry-differential thermal analysis (TG-DTA) results show that no graphitization of diamond grain occurs during sintering. The bonding ability between the vitrified bond and diamond grain, along with the microstructure of vitrified-bond diamond composites, was studied using scanning electron microscopy (SEM). Moreover, the results of energy spectrum analysis (EDS) show that the diffusion and segregation of Na at the interface between the diamond particles and the vitrified bond improve the bonding strength, and the vitrified bond can effectively bond with the diamond particles. Finally, the formation mechanism of the honeycomb structure was elucidated using the surface and interface sintering theory. [ABSTRACT FROM AUTHOR]

In this research work, laser powder bed fusion (LPBF) based stainless steel 316L (SS316L) was fabricated and its corrosion behaviour was analysed for the oil-gas piping application. The Field Emission Scanning Electron Microscopy (FESEM) analysis of the LPBF SS316L specimen revealed the presence of 1–2 μ m size honeycomb structure and 2–10 μ m size tabular structures. Nano-size particles in the range of 100 nm–500 nm were formed between the two tabular cells as well as their boundary regions in the LPBF SS316L specimen. The energy-dispersive X-ray spectroscopy (EDS) analysis of the nanoparticle confirmed the presence of Si with a percentage of 1.4% along with 15.9% of Cr and 1.6% of Mo that have the characteristic of dispersion strengthening of the LPBF SS316L specimen. In addition, the δ-ferrite phase was observed in tabular structure boundaries and intercellular regions of solute in the LPBF SS316L specimen. Moreover, among the three crystallographic orientations {001}{101}and {111}, no domination behaviour was observed from the Electron Backscatter Diffraction (EBSD) study. The Transmission Electron Microscopy (TEM) analysis confirmed the presence of nano twin structures that had a span of several nm on the FCC austenite unit cell. These twins came under the {111} category twining that often occurred in FCC metals. A potentiodynamic polarization test was conducted on the LPBF SS316L specimen at five different time periods (i.e., 0, 7, 15, 34 and 56 h) and it was assessed that the 0 and 15 h immersion specimens exhibited superior corrosion resistance compared with other LPBF SS316L specimens. The Nyquist plot revealed that the 0 and 15 h immersion specimens offered the highest resistance value of 1846.1Ω and 1720.3 Ω, respectively against corrosion. The Bode plots of the LPBF SS316L specimen followed a similar trend as the Nyquist plots. [ABSTRACT FROM AUTHOR]

• The models for thermal conductivity tensor of two types honeycombs are proposed. • Impact of the wall uniformity within honeycomb on the thermal property is quantified. • Honeycomb ETC's max anisotropic porosity reduces as thermal conductivity ratio rises. The effective thermal conductivity (ETC) is a critical parameter for simulating macroscopic heat transfer processes in composite materials, which estimation is particularly critical where the thermal conductivity of the composite phases is completely different. The huge difference in thermal conductivity of the composite phases makes their volume fraction modulation a classical way to reach the desired thermal conductivity. Nevertheless, the typical manufacturing process of honeycomb cellular structures allows various degrees of stretching of the structure, leading to various honeycomb geometries. In these 'real' structures some of the honeycomb wall sides are twice as thick as other parts, modifying the symmetry of the system with respect to honeycomb with uniform wall side thickness. A noticeable example of these composites is that of a hexagonal metallic honeycomb structure filled with phase change material (PCM) which is a widely utilized material in the field of thermal storage and thermal management by exploiting the heat absorbed/released by the PCM phase during its melting/solidification. While the thermal response of a PCM composite during a thermal cycle is not only defined by thermal conductivity (but also by cell size), this represents the basis for the with the optimization of a system based on a composite PCM. For this reason, in this study, steady-state simulations of heat transfer in unit honeycomb cells in different directions perpendicular to the cell axis are conducted to quantify the impact of morphology on the thermal property of the different wall types within honeycomb structures. The results demonstrate that in both SHS and DHS, the porosity exhibiting maximum anisotropy of ETC decreases as the thermal conductivity ratio increases. Moreover, simple predictive models for calculating the ETC in all directions are proposed for each type of honeycomb, considering a wide range of porosity and thermal conductivity ratio, with a relative error limited to 2 %. [Display omitted] [ABSTRACT FROM AUTHOR]

High temperatures can significantly diminish the efficiency of solar photovoltaic panels, emphasizing the critical need for effective thermal management strategies. While the use of phase change material has shown promise in this regard, issues arise from non-uniform temperature distribution within the phase change material, limiting its overall effectiveness. This paper introduces an innovative solution by incorporating a novel honeycomb-like aluminum structure into the phase change material tank, aiming to address these challenges. Numerical investigations explore various configurations involving different phase change material volumes and aluminum honeycomb grid thicknesses. The honeycomb structure proves effective in preventing the formation of a single high-temperature melting pool, ensuring a more uniform distribution of melting zones throughout the phase change material. Compared to scenarios without the honeycomb structure, the proposed design achieves an additional 10 °C reduction in photovoltaic cell temperature, translating to a noteworthy 0.57% improvement in panel efficiency. This enhancement is particularly significant given the baseline low efficiency of the photovoltaic panel, which stands at 14.7%. Furthermore, the study reveals that increasing the thickness of the aluminum grid contributes to enhanced temperature uniformity, reducing the maximum temperature by up to 4 °C. The findings underscore the potential of the proposed honeycomb structure. • A novel aluminum honeycomb structure is proposed for photovoltaic panel thermal management. • Compared to panels cooled without the honeycomb, it achieves a 10 °C temperature reduction. • The structure enhances photovoltaic panel efficiency by 0.57%. • Uniform temperature distribution and melting zones are achieved in the phase change material zone. • Improved thermal management enhances efficiency, prolongs panel lifespan, and ensures system reliability. [ABSTRACT FROM AUTHOR]

• Three kinds of honeycomb structures were printed using carbon fiber reinforced composites, and the tensile mechanical properties of honeycomb structures were studied by combining experimental and simulation analysis methods. Finally, the relationship between fracture toughness and fractal dimension of tensile fracture surface is analyzed by fractal theory. The study employed chopped fiber-reinforced nylon composite, referred to as "Onyx," along with continuous carbon fiber materials. Using the material extrusion manufacturing process, three sandwich structures were created: a conventional, a concave hexagonal with negative Poisson's ratio, and a feather-inspired structure. Tensile testing and finite element simulations were conducted to analyze their tensile properties and crack propagation paths under tension. Fractal dimensions were calculated for each structure: the standard structure had a dimension of 1.4626, the bionic feather-inspired was 1.4810, and the negative Poisson's ratio concave hexagonal structure measured 1.4973. [ABSTRACT FROM AUTHOR]

[Display omitted] • Synthesis and characterization of modified NH 2 -MCM-41 for drug release. • Performance of modified NH 2 -MCM-41 nanoparticles improved compared to MCM-41. • Analysis of Adriamycin, Metformin and Naproxen drugs release. The aim of this work is the preparation and characterization of modified mesoporous silica NH 2 -MCM-41 (NM-41) nanoparticles (NPs) in comparison to MCM-41 (M−41) with the aim of obtaining a pH-sensitive system for controlled drug release (CDR) applicable in cancer treatment. Three drugs were used for CDR studies including Adriamycin, Metformin and Naproxen, and loaded onto the mesoporous silica. The samples were prepared and analyzed by solid characterization methods including FTIR, XRD, SEM, TEM, BET, and DSC analyses. The SEM images clearly showed the increase in surface porosity of NM-41 nanocarriers (NCs) compared to M−41 NCs. The CDR behavior of the obtained NCs was investigated at pH 1.5–3.5 (simulated gastric fluid media-SGF), pH 6 (simulated intestine fluid media-SIF) and pH 7.35–7.45 (simulated body fluid media-SBF). The results showed that the performance of modified NM-41 NPs improved compared to M−41, and the performance of modified NM-41 NPs at SIF and SBF pHs is much higher than SGF, which shows the success in the preparation of drug pH-sensitive NCs for CDR. The results of drug loading showed that the amount of Adriamycin, Metformin and Naproxen drugs in modified NM-41 NPs is significantly higher than M−41. Furthermore, survival studies were conducted for the prepared systems and the results showed good biocompatibility of the prepared drug delivery systems (DDS). [ABSTRACT FROM AUTHOR]

The battery-pack system of electric vehicles is prone to collide with low obstacles on the road, causing battery short circuits and even explosions. It poses a great safety threat to passengers and drivers. The honeycomb structure's high energy absorption and lightweight properties have made it a popular choice in the automotive industry. This paper designs different bio-inspired honeycomb structures to a battery-pack system of electric vehicles to improve the crashworthiness performance. The effects of different bio-inspired honeycomb structures on the crashworthiness of a battery-pack system during frontal impact are analyzed based on a nonlinear finite element model. First, the geometric parameters of seven different bio-inspired honeycomb individual units are described. The overall structure of the honeycomb is applied to a battery-pack system. Second, the nonlinear finite element model of a battery-pack system and honeycomb structures are established and verified. Then, collision simulations are conducted. The deformation and the maximum stress of a battery-pack's bottom shell are computed. The energy absorbed by the honeycomb structures during frontal impact are investigated. The results indicate that the proposed bio-inspired honeycomb structure mimicking grass stems improves the safety performance of battery-pack systems most. Finally, a parametric design is carried out on the bio-inspired honeycomb structure. The effects of wall thicknesses and the number of replacement hexagons on the crashworthiness performance are analyzed. The honeycomb structure preforms best when thickness is 1 mm and the number of replacement hexagons is 2 and 4. The optimized bio-inspired honeycomb structure reduces the deformation of the battery-pack' bottom shell by up to 30%, and maximum stress by 10%. • The deformation, maximum stress, and energy absorption are investigated. • The effects of seven bio-inspired honeycomb structures are analyzed. • Parametric design is carried out to further improve the crashworthiness performance. • The deformation of the bottom shell can be reduced by up to 30%. [ABSTRACT FROM AUTHOR]

• A honeycomb-structured superhydrophobic coating is prepared. • The coating exhibited a high visible light transmittance (90.0%). • By regulating structure, the haze of the coating can be adjusted (8.9%-54.1%). • The coating has excellent mechanical abrasion and weathering resistance. Transparent superhydrophobic coatings have excellent self-cleaning performance and are particularly suitable for applications in the fields of outdoor photovoltaic displays, solar power generation, and windows. However, the micro-nanostructures required for superhydrophobic coatings make them poor abrasion-resistant and foggy, and hence transparent superhydrophobic coatings with good practicality still remain great challenging. Here, we report honeycomb-structured coatings simultaneously with high transparency, abrasion-resistance and superhydrophobicity by fabrication of honeycomb epoxy resin structure via PDMS template method and subsequent spraying of hydrophobic SiO 2 nanoparticles. The coatings with different honeycomb structures exhibit average transmittance of 90.0 %, and the haze in the range of 8.9–54.1 %. Both the honeycomb structure formed by hard epoxy resin and strong adhesion of hydrophobic SiO 2 nanoparticles enable the coatings to maintain superhydrophobicity after harsh mechanical abrasion and weathering. [ABSTRACT FROM AUTHOR]

The natural beesʼ honeycombs maintain long-term structural stability in harsh environments, employing a highly material-efficient approach. However, the reasons remain somewhat ambiguous. To clarify the stabilization mechanism and investigate quasi-static compression responses of double-layer ordered cellular structures, honeycomb, Tóth and single-layer cellular structures with a relative density (ρ r) of 25.84 % were fabricated using 3D printing technology. Then, quasi-static compression experiments in three directions were conducted. Further, a numerical study was conducted to uncover the stabilization mechanism and effect of ρ r on compressive behaviors. Results revealed that the stabilization mechanism was mainly attributed to bearing load priority of intermediate layer and its inhibition on formation of plastic hinges. A relative density of 5.17 % served as a transition point for deformation mode, beyond which honeycomb and Tóth structures exhibited stronger in-plane compressive strength at expense of less sacrificed out-of-plane compressive strength, below which they both exhibited more stable compressive curves compared to single-layer cellular structures, which were favorable for energy absorption. This study clarifies the stability mechanism of beesʼ honeycombs and addresses the lack on compression behaviors of double-layer ordered cellular structures. Moreover, it introduces two available bionic structures with controllable deformation modes to expand the application of single-layer cellular structures. [ABSTRACT FROM AUTHOR]

Hydrogen production from biomass is an efficient and clean utilization way for renewable energy to significantly alleviate the energy crisis. In order to improve the biomass conversion efficiency, a device combining honeycomb structure wood and inert porous pellets was proposed, and the combustion characteristics of honeycomb wood was studied with different biomass species and pore structures. The results indicated that softwood had the higher syngas yield compared with hardwood, and the hydrogen yield was up to 9.0 %. The increasing of inlet air velocity improved combustion temperature, but it was not conducive to syngas production. In addition, circle shape structure showed the stable combustion rate and the high conversion efficiency due to the uniform pore distribution. With the increasing of pore number, outlet temperature and hydrogen production increased first and then decreased. Moreover, syngas yield improved as the pore diameter increased and the maximum hydrogen growth rate reached 256 %. Meanwhile, the co-combustion mechanism of honeycomb wood and inert pellets was revealed, and the efficient realization of heat-hydrogen coproduction had practical guiding significance for optimizing the energy structure. [ABSTRACT FROM AUTHOR]

• Combining ML and FE methods to accelerate the design process of honeycomb structures. • Using 2D unit cell surrogate 3D honeycomb structures. • CDAE with a pixelation strategy is proposed to manage FE data. • LSTM uses latent features and external loads to predict structural dynamic responses. In this study, a novel framework was presented for accelerating the prediction of the mechanical response of honeycomb structures under dynamic crushing, using 2D cells to surrogate 3D honeycomb structures by machine learning (ML). The sizes of different honeycomb structures were designed and the necessary training data obtained through finite element (FE) simulations, but without using any explicit design parameters of the honeycomb cells in the ML model. A pixelization method of FE model was proposed to separate the complete cell structure from the honeycomb FE grid data and convert it into a matching pixel map. FE data was structuralized while reducing the large amount of computational power consumed in identifying complex array structures. Unsupervised automatic extraction of low-dimensional features of pixel maps was performed using a convolutional denoising autoencoder (CDAE). The crushing velocity and the extracted latent features were used as the input of the long-short term memory (LSTM) network to predict the crushing deformation and stress-strain curve of the honeycomb structure under different dynamic loading. Results showed that the constructed ML model could describe the dynamic crushing response behavior. Compared with the traditional FE method, the prediction model was 4.45 × 103 and 1.05 × 103 times faster in predicting the stress-strain and structural deformation response, respectively. The mechanical response prediction model provided a method for rapidly evaluating the dynamic mechanical response behavior of similar periodic array structures using FE model data, which could be beneficial for the design and development of equipment based on bionic structures. [ABSTRACT FROM AUTHOR]

Honeycomb structures exhibit outstanding mechanical properties with specific unit cell configurations. We introduce a novel honeycomb structure that can enhance the compression property and energy absorption capacity by utilizing four-dimensional (4D) printing technology with polylactic acid (PLA) materials. In the designed honeycomb structure, the walls of the adjacent unit cells are independent, and the shape of the unit cells can be transformed between a hexagon and triangle under external loading and temperature stimulus. 4D printing technology is employed to prepare the honeycomb specimens, and the deformation processes of the innovative honeycombs are implemented. Structure I (a novel hexagonal honeycomb structure) and Structure II (a semi-triangular honeycomb structure) can be transformed into each other. Uniaxial quasi-static compression and impact tests are conducted to investigate the compression property and energy absorption capacity of the designed honeycomb structures. The results indicate that the novel honeycomb had a high compression property with Structure II, and had high energy absorption capacity with Structure I; thus, the developed honeycomb structures have broad application prospects for the multifunctional applications of honeycomb structures in the future. [ABSTRACT FROM AUTHOR]

One of the most critical challenges in the field of hydrogen production through water electrolysis technique is the design, development and manufacture of electrode materials with low-cost, highly electrocatalytic activity and stability. We employ the galvanostatic deposition technique to prepare the honeycomb structured Co−Ni−Mo alloy electrocatalysts from ethylene glycol (EG) system, in which the honeycomb structure presents highly intrinsic electrocatalytic activity for hydrogen evolution reaction (HER). The electrochemical behavior of Co2+, Ni2+ and Mo6+ reductions and the co-deposition behavior of Co-Ni, Co-Mo, Ni-Mo and Co-Ni-Mo alloys is reported. Benefiting from the composition engineering by alloying with Mo atoms, as well as the simultaneous existence of a suitable honeycomb structure, these Co 58 Ni 23 Mo 19 deposits obtained at an optimal parameter exhibit prominent electrocatalytic durability and activity with a η 10 of 51 mV for HER in a 1.0 M KOH. More importantly, the formation model of the honeycomb structured Co-Ni-Mo alloy deposits is proposed. This work suggests a simple and economical method for the preparation of a 3-dimensional catalytic electrode. [Display omitted] • Co-deposition behavior of Co-Ni, Co-Mo, Ni-Mo and Co-Ni-Mo alloys in EG system is reported. • Co-Ni-Mo deposits with a honeycomb microstructure can be prepared from EG system. • Co 58 Ni 23 Mo 19 electrode presents a high electrocatalytic activity and stability for HER. • Formation model of the honeycomb structured Co-Ni-Mo deposits is proposed. [ABSTRACT FROM AUTHOR]

[Display omitted] • A three-layer composite absorber composed of lossy material and artificial electromagnetic structure is proposed. • Magnetic coating can enhance the low-frequency absorption performance of composite absorber. • Pattern-impregnated honeycomb and resistive FSS jointly exhibit better impedance matching. • The fractional bandwidth of S 11 < −10 dB reaches 158.9% with a relative thickness of 0.6 λ L. • A maximum mechanical tensile stress of 67.43 MPa is obtained. In order to realize electromagnetic stealth of large equipment, we propose a low-cost, mass-producible composite microwave absorber in this paper. The developed novel EM absorber comprises a pattern-impregnated honeycomb structure with the absorbent of carbon black (CB), a resistive frequency selective surface (FSS) embedded in polypropylene (PP) foam, and a mixture coating covered on a metal plane whose absorbent is flaky carbonyl iron (FCI). CB particles and FCI particles provide electrical and magnetic losses at the microscopic scale. Moreover, the subwavelength-scale artificial electromagnetic structure achieves broadband matching to free space by adjusting macroscopic geometric parameters. The consistency between measurements and simulations proves that the composite absorber achieves over 90% absorption ratio with a thickness of 8.3 mm from 2.06 to 18 GHz (corresponding to a fractional bandwidth of 158.9%). Additionally, this composite absorber possesses good mechanical property with a maximum uniaxial tensile stress of 67.43 MPa. [ABSTRACT FROM AUTHOR]

[Display omitted] • Spinal interbody cages adapted for an auxetic, and honeycomb using standard CAD software operations and manufactured with SLM. • Auxetic-based cages exhibit higher strength properties than honeycomb-based cages. • The stiffness of the auxetic cages is comparable to stiffness of human cortical bone. • The honeycomb cages exhibit lower value of Young's modulus closer to that for vertebrae. This paper presents a method for modeling a biomedical device by adaptation a commercially available interbody cage for an auxetic metamaterial and honeycomb structure using standard operations in Computer-Aided design software. The mechanical properties of experimental prototypes of Ti-6Al-4 V cages made by selective laser melting using computer modeling (finite element analysis), static and low-cycle fatigue compression tests (up to 3500 cycles) are characterized. 3D printed cells with structures with an angle of inclination between cell edges of less than 90˚ (auxetic metamaterial) are shown to exhibit higher static compressive strength and fatigue resistance than cells based on structures with an angle of inclination greater than 90˚ (honeycomb structure). The changes in the inclination angle differently affect to the porosity and consequently to mechanical behavior of auxetic metamaterial and honeycomb structure. The Young modulus of the auxetic-based interbody cage is 6.68 ± 0.28 GPa and comparable to the elastic modulus of human cortical bone. The honeycomb-based cage exhibits lower values of Young modulus (1.19 ± 0.03 GPa) close to that of trabecular bone and vertebrae. Importantly, the auxetic-based cage is not destroyed after 3500 cycles under 14 kN load with residual deformations ≤ 1 % (0.21 ± 0.10 mm displacements). [ABSTRACT FROM AUTHOR]

Development of lightweight ceramic aerogel with enhanced thermal insulation and high temperature resistance is required in the field of thermal insulation. Here, a aerogel-like SiOC ceramic with honeycomb structure was prepared by solvothermal method using polyhydromethylsiloxane (PHMS) as precursor and divinylbenzene (DVB) as cross-linker followed by freeze-drying and pyrolysis. The pore size and homogeneity of the honeycomb structure could be further controlled by the content of DVB through adjusting the crosslinking degree of the PSO wet gel. The aerogel-like SiOC possessing uniform honeycomb structure with the pore size of 20–50 µm and the wall thickness of 3–6 µm is obtained at the mass ratio of DVB:PHMS of 2:1. The aerogel-like SiOC exhibits low density (0.14 g·cm−3) and low thermal conductivity (0.0577 W·m−1·K−1). Moreover, it maintains the honeycomb structure after high temperature treatment at 1400 °C in argon and 800 °C in air indicating its good thermal stability. This work provides a novel route for the preparation of the aerogel-like SiOC ceramic with honeycomb structure and designable overall performance, further expanding its application in thermal insulation. • A novel strategy for developing lightweight aerogel-like SiOC ceramic with honeycomb structure is reported. • Controlling honeycomb-like structure by DVB content. • Realizing low thermal conductivity of 0.0577 W·m−1·K−1. • Achieving good thermal stability of structure at 1400 °C in Ar. [ABSTRACT FROM AUTHOR]

3D printing of magnetorheological elastomers (MREs) can potentially create versatile and complex mechanical structures with reversible stiffening properties. Several additive manufacturing (AM) methods, like direct printing and stereolithography (SLA), have been used to achieve magnetic thermoset and elastomer composite structures. For the first time, we demonstrate the use of MREs based on thermoplastic elastomers (TPE) in AM and we investigate their magnetorheological (MR) effect when used in lightweight honeycomb designs. Due to the low shore hardness of TPE, a screw extruder-based printing head is employed to print disk-shaped samples with honeycomb patterns at infill percentages varying from 15% to 50%. In order to compare the MR effect of disks with varying honeycomb infills through a compression method, we investigated the effect of different testing configurations. We observe that different permanent magnet configurations, as it has been used in literature so far, create an additional effect on the measured MR effect of the MRE samples. To eradicate this effect, a test setup with an unpaired permanent magnet configuration is proposed. MRE structures with an infill density of 20% showed, at 1% deformation range, the highest MR effect, almost four times as high as 100% infilled samples. MRE structures with an infill density between 30% and 50% showed a lower MR effect than at 20%, but were still higher than at 100%. We observe in simulations that the magnetic flux density of 100% infilled samples was higher at the edges of the samples and lower at the center. For samples with honeycomb infill, the magnetic flux density was higher at the outer rim of the samples and edges of the walls within the sample, which causes a higher MR effect. Our work demonstrates that the MR effect can be tuned by designing a MRE structure with a honeycomb infill. The honeycomb infill results in lightweight MREs with improved MR effect useful for various downstream applications that require reversible strong stiffening while remaining comparatively lightweight. [Display omitted] • Light-weight magnetorheological structures made with additive manufacturing. • Step-by-step study of magnetorheological characterization under compression mode. • Paired permanent magnets leads to overestimated magnetorheological (MR) effect. • Effect of varying honeycomb patterned infill density on MR effect was investigated. • Magnetorheological structures with lowest infill shows the highest MR effect. [ABSTRACT FROM AUTHOR]

In this paper, we synthesize honeycomb structure titanium dioxide (TiO 2) grafted with carbon fiber (CF) composites (CF/TiO 2) for flexible supercapacitors (SCs), which evidently boosts specific surface areas (SSA) of CF. In addition, we put forward an effective strategy for enhancing conductivity of TiO 2 relying on construction of oxygen defects in NaBH 4 solution. Amazingly, the reduced-TiO 2 supporting on CF electrode (CF /R–TiO 2) obtains from optimum conditions (2 M 4h) and exhibits the highest specific capacitance of 115.2 F g−1 at 1200 mA g−1, suggesting ultra-utilization of R–TiO 2 for SC. Interestingly, its capacitance retention still remains 98.37% after 10000 cycles, which declares prominent cycling stability. Furthermore, we conduct density functional theory (DFT) analysis to reveal the enhancement mechanism of R–TiO 2. With the reduction process, Fermi energy (E F) can obviously move conduction band (CB), which indicates increments of electronic conductivity of TiO 2. Moreover, the aqueous symmetric SC based on CF/R–TiO 2 (CF/R–TiO 2 -SC) expresses a high energy density of 49.6 Wh kg−1 at a power density of 1440 W kg−1. Meanwhile, the all-solid-state flexible supercapacitor (CF/R–TiO 2 -AFSC) further presents favorable flexibility in tested bending angles. Our results demonstrate that CF/R–TiO 2 is provided with introduction of oxygen defects and honeycomb structure, which might have tremendous potential for SC. [Display omitted] • Honeycomb structure TiO 2 with oxygen defects was designed for supercapacitors. • Oxygen defects were introduced into TiO 2 by one-step NaBH 4 reduction. • Flexible CF/R–TiO 2 -SC exhibited the remarkable energy density of 48.4 Wh kg−1. • The CF/R–TiO 2 -AFSC could show favorable flexibility. [ABSTRACT FROM AUTHOR]

[Display omitted] • Self-folded honeycomb structure (SHS) was fabricated via stimuli-responsive materials. • Origami-inspired design for SHSs with energy-absorption properties was established. • Relationship of design, structure, and compression performance was elucidated. • Energy-absorption of 5-layered SHS was 6.67 times higher than that of 1-layered SHS. • Damage factor for protected object was successfully removed via pre-straining. The origami technique has been employed in the medical, space, and agricultural industries owing to its low cost and ease of use. In particular, the use of stimuli-responsive materials to automate origami fabrication has garnered interest. In this study, self-folded honeycomb structures (SHSs) were fabricated using the self-folding technique. A sheet of paper undergoes self-folding without human intervention via the physicochemical reactions between the paper and printing solution. Six SHSs with different mechanical properties were fabricated. The relationship between the design and structural parameters was examined. The energy-absorption performance of the structure improved by a factor of 15.2 on employing the optimal parameters. A consistent relationship between the design and compression performance was also discussed. By applying stacking technology, the energy-absorption performance increased by an average of 1753 N·mm per layer. The application of a pre-strain eliminated the compressive force peak that could damage the protected object, while maintaining 90 % of the energy-absorption performance. The proposed technology shows potential for the fabrication of tailored energy absorbers using stimuli-responsive materials, providing a groundbreaking technology for the packaging industry. [ABSTRACT FROM AUTHOR]

The mechanical behaviors of honeycomb cores subjected to out-of-plane compressive loading were studied based on the deformation of cell walls. Four types of honeycomb structures, with and without panels, were experimentally, theoretically, and numerically investigated, respectively. In addition to the deformation of outer sidewalls, the stereovision three-dimensional digital image correlation (3D-DIC) method was first applied to determine the deformation process of the inner sidewalls. A coaxial 3D-DIC was developed to obtain the full-field displacements and strain distributions of the inner sidewalls. The compression strength of the structures was predicted successfully by the theoretical elastic buckling strength. Moreover, the onset of the damage process was simulated with finite element calculations, which agreed well with experimental data. Therefore, this study provides a better understanding on the behavior of honeycomb structures from the deformation of outer and inner surfaces. [ABSTRACT FROM AUTHOR]

With booming development of 5G communications and electronic devices, electromagnetic waves (EMWs) radiation pollution has aroused much concern on public, and great efforts are being made to develop the high-performance electromagnetic interference shielding (EMI SE) materials. However, inherent deficiencies of traditionally processing technology restrain the current materials to fabricate desirable architectures for SE applications. Herein, taking full advantages of 3D printing in free-construction, architected honeycombs featuring lightweight and high-efficient EMI SE are designed with polylactic acid (PLA) as matrix, and graphene nanosheets and carbon nanotubes hybrids (GNs/CNTs) as functional fillers. The optimal printed material shows a high electrical conductivity up to 110.8 S/m and outstanding EMI SE property of 53.5 dB, far exceeding the standard of commercially shielding materials (20 dB). More encouragingly, this work makes a deep insight into the intrinsic connection of porous structure of 3D-printed components on shielding mechanism, which reveals that as the pore size is far less than a certain proportion of incident wavelength (λ/5), the components exhibit a good reconcilability on the lightweight (0.4–1.0 g/cm3) and high-performance EMI SE (35–45 dB). From fundamental materials to desirable components, this breakthrough lays a solid foundation for the free-construction of diversified architectures in EMI SE applications. [Display omitted] • The strong conductive networks are constructed by the hybridization of graphene nanosheets and carbon nanotubes. • The hybrid networks endow the 3D-printed components with superior electromagnetic interference shielding (∼53.5 dB). • The diameter of porous structures should be less than the 1/5 of incident wavelength (λ) to shield electromagnetic waves. • The 3D-printed honeycombs exhibit a good reconcilability on lightweight and electromagnetic interference shielding. [ABSTRACT FROM AUTHOR]

• Co/Carbon (Co/C) composites were prepared by facile hydrothermal and calculation process. • Modulating permeability of Co/C is achieved by adjusting the amount of Co2+. • The obtained Co/C composite exhibits a bandwidth of 5.8 GHz at a low thickness of 1.8 mm. • The electromagnetic simulated honeycomb made by Co/C shows an ultrabroad bandwidth of 11.6 GHz. [Display omitted] Confronting with increasing electromagnetic pollution, traditional microwave absorbing materials have their limitations, such as low yield and long preparation periods. At the same time, it is well established that electromagnetic simulation is an effective technology to enhance work efficiency, which can quickly explore the impedance matching conditions and electromagnetic characteristics to improve absorbing performance. Honeycomb structure has been widely used in the field of microwave absorption due to its light weight, high strength and heat resistance. This structure also possesses the advantages of multiple scattering, which is beneficial to microwave attenuation. In this work, Co/carbon (Co/C) particles with effective absorption bandwidth (EAB) (the band corresponding to the reflection loss value less than −10 dB) of 5.8 GHz were synthesized by a simple hydrothermal method. Whereupon through the high-frequency structure simulator (HFSS) electromagnetic simulation, Co/C absorbers with honeycomb structure were macroscopically designed, achieving an ultra-broad effective absorption bandwidth of 11.6 GHz. Herein, the effective combination of electromagnetic simulation and honeycomb structure design greatly improves the absorption bandwidth of Co/C. This work paves the way for designing microwave absorption materials with broad effective absorption bandwidth. [ABSTRACT FROM AUTHOR]