Search

Despite the clearly stated procedures in current standards, and contrary to its name, nonstandard execution of the standard penetration test (SPT) has been common. The use of different equipment and procedures produces significantly different SPT blow counts. To minimize the effects of these differences, correction factors are applied. Two of these corrections factors, namely hammer energy efficiency ratio (CE) and rod length (CR) corrections, are the scope of this research study. With the intent of quantifying the effects of variabilities and reducing the uncertainties, SPT hammer efficiency measurements were compiled from available literature. Additionally, new hammer energy measurements were performed in the field, controlling the variables of the problem. The resulting database is used to probabilistically develop a set of new CE and CR recommendations. The recommended mean energy ratios for safety hammer and automatic hammers are estimated as 67%±11% and 78%±12% , respectively, which are higher than typically assumed values in engineering practice. The recommended rod length correction values at shallow depths, proven to be also a function of SPT blowcounts, N (SPT-N) values, are higher than typically used values. This suggests less pronounced rod length effects. Additionally, a modified procedure to assess the stress-wave energy at anvil and above the SPT sampler elevations is introduced. [ABSTRACT FROM AUTHOR]

Rainfall infiltration causes the collapse of unsaturated embankments due to loss of suction. In this paper, the Barcelona Basic Model (BBM), a constitutive model developed for unsaturated soils, was implemented in Fast Lagrangian Analysis of Continua (FLAC) for simulating the effect of varying rainfall intensities on compacted embankments. It was observed that large vertical deformations occur and considerably high positive pore-water pressures get developed, accounting for the collapse of an embankment. The results also show that rainfall intensity and duration affect the slope stability. A comparison was made between the results obtained using the Mohr–Coulomb model and BBM. It was found that the soil undergoes larger deformations when modeled using BBM as BBM accurately models the loss of suction upon saturation. Reliability analysis of embankment shows that probabilistic analysis provides a better assessment of slope stability rather than the factor of safety and shows that suction and hydraulic conductivity are critical parameters influencing slope reliability for unsaturated soil slope embankments. [ABSTRACT FROM AUTHOR]